Municipal Corporation Tender

Providing laying, spreading and compacting graded stone aggregate to wet mix macadum specification including premixing the material with water at OMC in mechanical mix plant carrage of the mixed material by tipper to site laying in uniform layers with pavers in subbase /basecourse on well prepared surface and compacting with vibratory roller to achieve the decide density etc, complete as per standard specifications. As per Clause 406 of Morth Specification

Preparing the Existing surface to laying the road to Proper Gradient and remove the loose soil without damage the Water Supply and other Pipe lines. The Rate inclusive of all charges such as Earth work and remove the same away from the site etc, complete as per standard specifications.

Vibrated cement concrete of grade M20 (Design mix) using 20mm, & 12mm HBG metal including Finishing with Using Power Trowel cost and conveyance of all materials to site and cost of cement including cost of form work, labour charges for mixing, transporting, laying and curing concrete and finshing the surface, hire charges for tools and plants including all other incidental charges etc., complete

GST 18%

Providing and laying tack coat of 2.5 kgs/10 sqm over the WMM surface treated with binder using 2.5 kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Specifications

Providing and laying Bituminous concrete to 30mm thick using 0.13cum of 19.00-9.50mm graded metal 0.17 cum of 9.50-2.36mm graded metal and 0.26 cum of 2.36mm & below metal by adding the shredded plastic 10% of Bitument quantity 5.03kg (50.30 x 10%=5.03kg) shredded plastic waste over the aggregate heated to 170 degree celcious in the central hot mix plant mixed well with 45.27 kgs of hot bitumen VG30 Bitumen (160 degree celcious) 60/70 grade for premixing per 10 sqm to lay 30mm compacted thick of bituminious concrete including the cost of materials and conveyance of all materials to CMP site, heating the bitumen and aggregates to the required temperature and mixing the minimum required temperature in central hot mix plant 20-30 tonnes capacity conveying the mix by tipper trucks to paver site, spreading the mix in required temperature for uniform thickness of 30mm with mechanical paver to the specified grades and cross sections and consolidated by 80-100 KN vibratory Roller / pneumatic roller to the required density etc., including labour for loading bitumen into bitumen tank and metal to feeder unit, labour for attending to paver side etc., including hire charges and fuel charges for 20-30 t CMP with bitumen boiler, tipper, trucks, paver finisher/9m paver finisher, vibratory/pneumatic rollers and all other tools and plants required, including all other incidental charges etc., complete as per specification using CMP Clause 507 of MORTH REV-5 specifications

Providing and laying Prime coat of 7 kgs/10 sqm over the WMM surface treated with primer using 7 kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as Prime coat manually etc., complete as per 502 of MORTH Specifications.