Municipal Corporation Tender
... More
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
Municipal Corporation Tender
Civil And Construction
Solid Waste Management
Building Construction
Eprocure
Opening Date22 May 2025
Closing Date2 Jun 2025
Tender Amount₹ 9,78,50,000
Technical
Technical
Financial
Additional Eligibility
Technical Capacity
... View More
The bidder should have prior work experience of executing similar nature work of civil engineering construction field of transfer station at least one number having 150 TPD during the period past Five years, with a value of not less than 80% of the tender put value for Government Department/Urban Local Bodies/PSU’s. Additionally, the Manufacturer/Authorized supplier/Dealer as a contractor should have satisfactorily supplied, delivered, tested and commissioned Three similar completed works each having not less than the Transfer station equipment numbers specified equal to 40% of the estimated numbers put to tender, or Two similar completed works each having not less than the Transfer station equipment numbers specified equal to 60%. The bidder should have completed civil work(s) of not less than 25% of the value put to tender under a “single agreement” in any one of the preceding two years for a government department/board/government undertaking. In terms of financial requirements, the bidder should have an annual minimum financial turnover of not less than 100% of the value of work put to tender in any three financial years in the last Five years. The bidder should also have working capital sufficient to finance at least 350.00 Lakhs. Each member of the consortium shall have a minimum turnover of 25% of the tender put value. The Bidder's / consortium members combined average turnover for any three years out of the last five financial years preceding the bid due date shall not be less than Rs. 750.00 Lakhs. The minimum average turnover of each of the members shall be 25% of the tender put value and the combined Turnover of the consortium members shall be 100% as required.
Costs
EMD
₹ 9,78,500Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_DMA_560287_3Tender No
465/2025/E1-5Tender Authority
Municipal Corporation ViewPurchaser Address
-Website
http://tntenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Anti-termite treatment to the outside of foundation with chemical emulsion by admixing Imidaclaprid emulsifiable concentrate (62 ml in 28.5 litres ) with water by weight, drilling 12mm. dia holes in concrete or masonry apron at an interval of 300mm. to a depth, of 300mm or more as close to the plinth wall as possible and the chemical emulsion pumped into those holes to soak the soil below at a rate of 2.25 litres per linear metre complete as per specification laid down in para 4.3.1.1 of Code I.S.-6313 (Part-III)-1981.
1750
-
-
... More
Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification
49
-
-
... More
Poviding and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers -
119
-
-
... More
Providing and laying in position Standardised Concrete Mix M-30 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 400Kg/ cum and maximum water cement ratio of 0.45 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone sand (M- Sand) but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers
201
-
-
... More
Providing and laying, spreading and compacting graded stone aggregate to Wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications.
187
-
-
... More
Providing of Granular Sub base using Grade I materials of table 400 -1 of Morth with minimum CBR 30 spreading in uniform layers with motor grader on prepared surface, mix in by palce method at OMC and compacting with Vibratory Roller to achieve the desired density including all labourcharges etc, complete as per technical specification and as directed by the departmental officers. Morth - Rev V No. 111,112,401,900
187
-
-
... More
Vibrated cement concrete of grade M35 above (Design mix) using 20mm and below HBG metal including cost and conveyance of all materials to site and cost of cement excluding cost and fabrication of steel but including cost of form work(centering,shuttering), labour charges for mixing, transporting, laying and curing concrete, working at heights, hire charges for tools and plants including all other incidental charges etc., complete
311
-
-
... More
Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.
42000
-
-
... More
Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification
26000
-
-
... More
Fabricating supplying and fixing of pre painted galvanium colour sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.
1589
-
-
... More
Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38
-
-
-
... More
For vertical wall
132.74
-
-
... More
For Column
236.73
-
-
... More
For Grade Beam / Plinth Beam
321
-
-
... More
For Roof Beam /Slab , Lintel Beam
210.4
-
-
... More
Providing and fixing Bitumen Pad for Expansion joint in between pavement slabs to 12mm thick and fixed as shown in the drawing including cost and conveyence of expansion joints including shalimar pad and joint sealent etc, complete as per standard specification
160
-
-
... More
Supplying and fixing in AC Exhaust Fan 450mm(18") Sweep (Heavy Duty) with all connections etc, as per standard specification
8
-
-
... More
Supply and fixing of M.S Gates with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.
3000
-
-
... More
Brick work in CM 1:5 (one cement & five sand) using II nd class Ground Moulded Brick of size 230 X110 X 75mm including finishing, curing, etc., complete complying with standard specification - 100CFT
92
-
-
... More
Brick Partition Walls using II class country bricks of size 8 3/4"X4 1/4" X 2 3/4" in C.M 1:3 using hoop iron reinforcement,if found necessary standard specification including finishing, curing,etc., complete complying with standard specification - 10 sqm
33
-
-
... More
Randam rubble masonry in Cm 2:5 mix usinbg granite stone and 10% of bond stones including cost and conveyance of all materials and all labour charges etc complete
25
-
-
... More
Plastering with cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications
91
-
-
... More
Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.
788
-
-
... More
Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work
86
-
-
... More
Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured cement
44
-
-
... More
Dadooing walls with ceramic tiles of sizes 300mm X 450mm X 8mm size of approved make and quality and colour Set in cement mortar 1:2 (One part of Cement and two part of Plastering Sand (P- Sand)) over 10 mm base layer plastering and pointing with white cement neatly as directed.
8
-
-
... More
Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc., complete.-10 cum
91
-
-
... More
Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete
91
-
-
... More
Paving the floor with pre-polished Concrete Anti-Skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg/sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers.
126
-
-
... More
Construction of reinforced earth wall facia works including earth work excavation for entire approach necessary ground improvement casting of recast facia elements of 180mm thick in RCC M35 grade concrete as per standard specification
126
-
-
... More
Painting two coats for wall surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.
931
-
-
... More
Supplying and fixing in position C.I.Manhole covers (light or heavy duty) of 60 X 60cm in size in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), of best approved quality and as per standard specifications etc.,complete.
20
-
-
... More
Supply and erecting 1 HP monoblock with ISI mark with necessary accessories complete complying with standard specification
2
-
-
... More
Solid PVC Door Shutters using 19 Gauge 19mm MS squaretubes for styles and outer frames. 15mm MS square tubesfor top, lock and bottom rails. The steel tubes shall becovered with 5mm thick solid PVC Sheets. Shutter using5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. Theover all size of styles shall be 50mm x 30mm. The over allsize of top rail, lock rail and bottom rail shall be 75mm x30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter -Solid panel PVC door with frame
8
-
-
... More
Providing and fixing Door Frame in position to line and level inMalaysian/Ghana Teakwood frame out of specified sections finished size135mmx65mm asper drawing details including cuttingrebate,finished in 3 coats of natural polish matt finish (TUFFWOOD OR EQUIVALANT) matching the shutter laminate finish of approved colour & shade as per Architects instructions.
13
-
-
... More
Supplying and fabrication and fixing in position of anodised natural colour matt finish sliding window in two track in all floors with following sizes. All the three shutters with slinding arrangements, the bottom section should have Gutter arrangements so as to drain the water entering and made with extruded aluminium section for outer frames as shown below with necessary accessories such rubber beading. Aluminium clips, rubber beading,handle and fixing 4mm thick clear sheet glass including all required for fabrication etc., complete.Necessary dismantling making holes in RCC columns, beams, masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing as directed by the departmental officers.The Al.Surfaces is to be anodised with matt finish under electrically condition in accordance with ISI 1868/1962 specification for an average anodic film thick of not less than 15 microns.
18
-
-
... More
Internal Water Supply - CP.V.C. Pipes (6Kg/SqCm) Supplying laying and jointing P.V.C pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges. 32MM
75
-
-
... More
Internal Water Supply - P.V.C. Pipes (6Kg/SqCm) Supplying laying and jointing P.V.C pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges. 25MM
150
-
-
... More
Internal Water Supply - CP.V.C. Pipes (6Kg/SqCm) Supplying laying and jointing P.V.C pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges. 32MM
347.92
-
-
... More
Internal Water Supply - P.V.C. Pipes (6Kg/SqCm) Supplying laying and jointing P.V.C pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges. 25MM
75
-
-
... More
Supplying and fixing in position first quality and approved variety of Gun Metal Gate Valve (Heavy type ) with I.S.I.mark of the following sizes including cost of Shellac , thread etc,.including labour for cutting and threading of G.I.Pipes etc.,complete complying with standard specifications for both internal and external water Supply arrangements.
1
-
-
... More
Supplying and fixing in position first quality and approved variety of Gun Metal Gate Valve (Heavy type ) with I.S.I.mark of the following sizes including cost of Shellac , thread etc,.including labour for cutting and threading of G.I.Pipes etc.,complete complying with standard specifications for both internal and external water Supply arrangements.
18
-
-
... More
Supplying and fixing in position first quality and approved of 32mm Dia Gun Metal Gate Valve (Heavy type ) with I.S.I.mark of the following sizes including cost of Shellac , thread etc,.including labour for cutting and threading of G.I.Pipes etc.,complete complying with standard specifications for both internal and external water Supply arrangements.
14
-
-
... More
Supplying and fixing in position best quality P.V.C soil/ waste pipes (6KSC) of various sizes having ISI mark and providing leakproof joints including fixing to the wall with P.V.C/ M.S clamps etc., and making connection to all sanitary fittings, dismandling masonry/R.C.C. works wherever necessary and making good the dismandled portion to the original condition, complying with standard specifications. 160MM DIA
316.85
-
-
... More
Supplying and fixing in position best quality P.V.C soil/ waste pipes (6KSC) of various sizes having ISI mark and providing leakproof joints including fixing to the wall with P.V.C/ M.S clamps etc., and making connection to all sanitary fittings, dismandling masonry/R.C.C. works wherever necessary and making good the dismandled portion to the original condition, complying with standard specifications. 90MM DIA
51.1
-
-
... More
Supplying and fixing in position best quality P.V.C soil/ waste pipes (6KSC) of various sizes having ISI mark and providing leakproof joints including fixing to the wall with P.V.C/ M.S clamps etc., and making connection to all sanitary fittings, dismandling masonry/R.C.C. works wherever necessary and making good the dismandled portion to the original condition, complying with standard specifications. 110MM DIA
273.25
-
-
... More
Supply and delivery and fixing of 2000 Litre capacity HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,
2
-
-
... More
Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 liters capacity PVC / 12.5 liters capacity porcelain low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting
3
-
-
... More
Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications
8
-
-
... More
Borewell Drilling of 8" Dia MS Casing Pipe and Erection of power Pump including suction pipe, valve pressure, pressure gauge pan el board consisting of TPICN switches starter, Voltmeter, Ammeter, three indicator lamps capacitor and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumps and trail run for 10 days including signing of completion of reports as required by EB authorities and finishing the pipe holes including the foundation bolts, nuts and earth pits. WD-W0868 Upto 3 HP Each 12614.15 WD-W0869 Above 3 HP upto 7.5 HP Each 14738.20 and 3 phase submessible pump with motor LPM 50 x 75mm - 1m 63mm Dia HDPE Pipe 150mm and supply and fixing of star - Delta starter -1m etc completed as directed by the officers
1
-
-
... More
Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap confirming to IS:2556 - Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers.
1
-
-
... More
Supply and Run of 4 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 10 sq.mm copper wire and making good of the concealed position.
234
-
-
... More
Supply and Run of 2 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 10 sq.mm copper wire and making good of the concealed position.
190
-
-
... More
Supply and Run of 3 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitablePVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 6 sq.mm copper wire and making good of the concealed position.
135
-
-
... More
Supply and Run of 2 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 6 sq.mm. PVC insulated SC unsheathed FRLS copper wire and making good of the concealed portion
145
-
-
... More
Supply and Run of 3 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitablePVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed position.
441
-
-
... More
Wiring with 2 x 4 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitablePVC rigid pipe Concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 16A one way module switch and 1 no. 16A 3/2 pin module socket with module front plate with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for Concealed PVC pipe power Plug point ( 8 points / Coil) Higher End
20
-
-
... More
Supply and fixing of 2nos.6A two module 5 pin socket , 2 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End
42
-
-
... More
Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) ( 4 points / Coil) Higher End
56
-
-
... More
Wiring with 3 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A two way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC pipe Stair case Light point Higher End
6
-
-
... More
Supply and fixing of 100 A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with PWD earthing.
1
-
-
... More
supply and fixing of 1400mm (56") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18")
8
-
-
... More
Supply and fixing of High-Power Plug & Socket 63A 380/415V 3P+N+E Surface Mounting Sockets+32A 200/250V 2P+E Surface Mounting Sockets including cost of all materials , labour, lead lift etc., complete.
6
-
-
... More
Supply and fixing of 100W LED flood light Fitting with Driver including cost of all materials , labour, lead lift etc., complete.
12
-
-
... More
Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End
6
-
-
... More
Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End
5
-
-
... More
Supply and fixing of 150W LED flood light Fitting with Driver including cost of all materials , labour, lead lift etc., complete.HIGH BAY LIGHT
16
-
-
... More
supply and fixing of 24W LED 2x2 square type Recessed fitting with LED (Higher end) with PVC unsheathed copper leads from terminals to the fitting.including cost of all materials , labour, lead lift etc., complete.
10
-
-
... More
supply and fixing of 18W LED Round type Recessed fitting with LED (Higher end) from ceiling with PVC unsheathed copper leads from terminals to the fitting. including cost of all materials , labour, lead lift etc., complete.
25
-
-
... More
Supply and Laying of 3 1/2 x 70 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. for METER PANEL TO MAIN PANEL
40
-
-
... More
Supply and fixng of TNEB meter board suitable for 3 phase 200 A service connection made up of suitable angle iron frame work of size 3 feet x 2 feet using angle iron of size 11/2"x11/2"x1/4" rigidly fixed on wall covered with hylemsheet of size 3 feet x 2 feet of 12 mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 200 A fuse units (500V), 1No .neutrallink, copper earth flat of size 1"x1/4"with inter connection of EB meter to fuse units by 19/16 PVC insulated copper wire with earth connection complete
1
-
-
... More
Supply and fixing of copper earth flat of size 1" x 1/4" earth pit main panel board including cost of materials and labour charges
40
-
-
... More
Earthing as per PWD standard with an earth electrode of 2 metre Class'B GI pipe of dia notless than 32mm complete with necessary masonry work
8
-
-
... More
Supply and Fixing 3x 6.0 sqmm flat cable in 37mm dia white PVC 4Kg pipe slive and earth work laying work. (For Security Room 1 to Bore well) for( MainPanel and PEB)
95
-
-
... More
Supply and Laying of 3 1/2 x 70 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. for service connection mains
53
-
-
... More
Hikvision PTZ Camera
Dahua 2MP DH-SD3A210-GN-A-PY 3-
inch 2MP 10X30Mtrs,With Full Color, Network Speed Dome PTZ
1
-
-
... More
Hikvision Bullet Camera
Hikvision 4MP POE IP Camera DS- 2CD1043G0E-I HD Bullet H.265+ 2.8mm
20
-
-
... More
Hikvision NVR
32 Channel Metal 4 SATA 4K NVR DS- 7732NI-K4,256 Mbps Incoming Bandwidth,H.265+
1
-
-
... More
Network Switch
Secureye 8+2 Full Giga POE S-8GE- 2UG-NW(10/100/1000)
5
-
-
... More
Harddisk
4TB Toshiba Surveillance Harddisk
2
-
-
... More
CAT6 Cable D-Link CAT6
660
-
-
... More
Rack
6U 500D Rack / Tray For Switch / With Spike
1
-
-
... More
Connectors RJ45 Jack
50
-
-
... More
Rack
2U Rack PVC Box With Spike
5
-
-
... More
Network Switch
8 Port Network Data Switch
4
-
-
... More
Network mangaement system client server pheriperal and other accsseroies with necessary soft copy of software and furniture server system-having ( Monitor -1, CPU -1, with instalation charges etc
1
-
-
... More
Supply and delivery of furnitures for Admin office security room , weigh bridge wooden ply wood carcass with laminate table of size 1200x750x750mm -5 Nos Visitor chair PVc material with hand rest of make (Nilkamal or equivlant ) -12 nos rolling charges hight adjustable with hand and head rest -1 No etc complete
1
-
-
... More
Weigh bridge including required hardware for weighment display soft ware RFID reader and automatic ( Human-less ) reader 40 T -1 No ( 7.50x3M ) boombarrier-automatic with autovehicle detection
1
-
-
... More
Static Compactor machine along with complete Electricals and Hydraulic system consist of
• Horizontal Compaction Machine SC – 260 with Tip Cart mechanism / Hopper
• Hopper
• Guillotine system
• Hydraulic Clamping Claw
• Drainage System for leachate
• Hydraulic Power Pack
• PLC based Electronic Controls.
• Container change over system (Two Containers)
The chamber volume of 3m3 - Compress cycle time in 41Sec - Theoretical Volume Capacity of 263 m3/h - Voltage of 415V - Rear tipcart lifting capacity of 2500 to 3000 kg - Rear Tipcart Volume of 5-8m3
2
-
-
... More
Container Change Over unit A two-container change over system is provided to move the filled container from the compactor and replace it with an empty container already placed on the tracks for replacement. This system is driven by hydraulic cylinder.
2
-
-
... More
Hook Loader 20 T Capacity should lift and transport 20m3 container carring MSW. Hook Loaders are fabricated in accordance with CE machine regulations and ensure the safety of its operator and its environment.
Hook loader must cinsists of suitable pump, valve, cylinders and rear Stabilizer for smooth operations in the Transfer Station. Material of Construction high grade Steel – S420, E450, S355
3
-
-
... More
Trucks 28 T Capacity {Make: Eicher / Ashok Leyland / Tata}BS-VI ARAI certified having Wheel base minimum 4800mm upto 5200mm.•
3
-
-
... More
Container 22 Cum must be constructed with suitable design with carrying capacity upto 17.50Ton pay load of MSW Round shaped container ensure that the discharge will be smoother at lower tipping angle and no residue will remain in the container, after discharge. Front of the container has a V-shaped structure with a hook eye made of special steel, which bears the forces during on- n - off rolling of the container.At the rear side two heavy duty rollers are attached for easy movement of the container on the ground during on-n-off rolling.
5
-
-
... More
Installation, Trail Run and Commissioning coimmissioning of static compactor with container change over unit - 2 nos, mounting of hook loader on truck - 3 nos, commissioning of containers - 8 nos
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%