Municipal Administration And Water Supply Department Tender
... More
The MAWS has issued a formal invitation for competitive bids for the Municipal Administration And Water Supply Department project, for Construction Of City Bus Stand At Chengalpattu Municipality in Chengalpattu, Tamil Nadu, with an estimated contract value of Rs. 9,50,00,000. The bid opening date for this tender is 27-05-2025 and the last date for bid submission is 16-06-2025. Interested bidders for Municipal Administration And Water Supply Department tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Municipal Administration And Water Supply Department - MAWS Tender
Civil And Construction
Building Construction
Eprocure
Opening Date27 May 2025
Closing Soon16 Jun 2025
Tender Amount₹ 9,50,00,000
Technical
Technical
Financial
Additional Eligibility
Class Of Bidder
... View More
The eligible class required by a bidder to participate or bid in the tender is: CLASS 1 Contractor.
Bid Capacity
... View More
Assessed Available Bid Capacity = (A*N*1.5 – B) Where A=Maximum value of civil engineering works executed in any one year during the last five years (updated to 2023-2024 price level) taking into account the completed as well as works in progress. N = Number of years prescribed for completion of the works for which bids are invited i.e 1 year B = Value of works of existing commitments and on-going works to be completed during the next 2 years.
Technical Capacity
... View More
The required prior work experience for the bidder includes: - Work as a prime contractor on similar works over the last five years
- Quantities of work executed as a prime contractor in the last five years
- Qualifications and experience of key personnel, including: - A Project Manager (civil) with not less than 15 years of experience in construction of similar civil engineering works - A Project Engineer with not less than 15 years of experience in construction of similar civil engineering works - Site Engineers with not less than 10 years of experience in construction of civil works with similar project experience - Site Supervisors with not less than 5 years of experience in civil construction works with similar project experience The value and percentage of similar works completed are:
- A civil works of similar nature (Building works) in their own name in a single agreement for a value of not less than Rs.475.00 Lakhs, which is 50% of the value of work put to tender
- An annual financial turnover of Rs.950.00 Lakhs, which is equivalent to 100% of the value of work put to tender
- Specific quantities of work in the past three financial years, including: - Earth work: 513.00M³ - Plain Cement Concrete: 480.00M³ - R.C.C. (not less than M20 grade): 1816.00M³ - Centering for R.C.C. Works: 8540.00M² - Steel Fabrication for Reinforcement of RCC Works: 2396.13Qtl - Brick masonry works: 285.00M³ The bidder should also have working capital sufficient to finance at least 15% of the value put to tender, which is Rs 142.50 Lakhs.
Costs
EMD
₹ 9,50,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MAWS_562047_1Tender No
9365/2025/p1Tender Authority
Municipal Administration And Water Supply Department ViewPurchaser Address
-Website
http://https://www.tn.gov.in/maws/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Boring, providing and installation bored cast-in-situ reinforced cement concrete piles of garde M-30 of specified diameter and length below pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. by Crawler mounted, telescopic boom hydraulic pilling Rig all complete, including removal of excavated earth with all its lifts and leads (length of pile for payment shall be measured up to bottom of pile cap)
-
-
-
... More
0.45 Dia pile
1847
-
-
... More
0.38 Dia Pile
17
-
-
... More
Supplying and filling the basement with Good Earth filling in layers of not more than 15cm thick well rammed watered and compacted - etc., complete complying with standard specification.
413.00000000000006
-
-
... More
Supplying and filling in foundation and basement with filling sand in layers of not more than 15cm.thick well rammed watered and compacted etc., complete complying with standard specification.
67.0014
-
-
... More
Plain Cement Concrete 1:2:4 (one cement, two fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification
5
-
-
... More
Plain Cement Concrete 1:4:8 (one cement four Crushed stone sand and eight aggregate) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification.
474.9968599999999
-
-
... More
Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)
2133.0028822500003
-
-
... More
Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid)
-
-
-
... More
Beams and slab
5051.0006
-
-
... More
For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc.
1356.0029999999997
-
-
... More
Providing and laying in position Standardised Concrete Mix M-25 Grade in a0.45ordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all R0.45 items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to a0.45elerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the R0.45 floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials)
-
-
-
... More
Foundation & Basement
146.004025
-
-
... More
For Ground floor
562.9973299999998
-
-
... More
For First floor
447.00480249999987
-
-
... More
for Head room
10.00412
-
-
... More
Providing and laying in position Standardised Concrete Mix M-30 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 400Kg/ cum and maximum water cement ratio of 0.45 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone sand (M- Sand) but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards.
650.0003762499998
-
-
... More
Supplying, fabricating and placing in position Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)
239613
-
-
... More
Brick work in CM 1:5 (one cement & five sand) using II class ground moulded bricks of size 9"X43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT
-
-
-
... More
In Ground floor
224.00303
-
-
... More
first floor
61.00350000000002
-
-
... More
Chipping of concrete & roughening the surface for plastering work at concrter surface area etc., complete. (PWD SOR P.NO : 22)
-
-
-
... More
Second Floor
54.002559999999995
-
-
... More
Brick Partition Walls using II class ground moulded chamber bricks of size 9"X43/8"X 23/4" in C.M 1:3 using hoop iron reinforcement,if found necessary standard specification including finishing, curing,etc., complete complying with standard specification - 10 sqm
-
-
-
... More
ground floor
89
-
-
... More
Dadooing walls with Glazed tiles of sizes 305mm X200mm X 6mm size of approved make and quality and colour l Set in cement mortar 1:2 (one cement ,two sand) over 10 mm base layer plastering and pointing with white cement neatly as directed.
-
-
-
... More
Glazed tiles of size 305X200X6 mm
163.99824
-
-
... More
Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement
-
-
-
... More
Designed Colour Ceramic Tiles of size 305 x 305 x 6mm
45.00045
-
-
... More
Paving the floor with design Rajasthan kotta tiles (colour and shade as directed) of size 610 mm x 610mm x 20mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement etc, complete as per standard specification
2066.000725
-
-
... More
Finishing the top of floor with Granolithic Finish with CC 1: 2: 4 (one cement, two sand & four HBG jelly) using chips of grade 10 mm and below for 25mm thickness and rubbed smooth etc, complete as per standard specification
2258.9962499999992
-
-
... More
Special Ceiling Plastering with cement mortar 1:3,10 mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)
3456.003882608695
-
-
... More
Plastering with Cement Mortar 1:5 (One cement and Five Crushed stone sand ), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.
3414.0040000000004
-
-
... More
Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and 0.075mm thickness as directed by the departmental officers etc., complete.-10 cum
146.99852000000004
-
-
... More
Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One Cement add three sand) 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete
1830.9965000000004
-
-
... More
Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m
6870.007882608696
-
-
... More
Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.
7.997999999999999
-
-
... More
Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.
178.20000000000002
-
-
... More
Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete (PWD SOR P.NO : 57)
71.00000000000001
-
-
... More
Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from unplasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside.Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug.
108
-
-
... More
UPVC Window
Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work (pwd sor p.no :70)
9
-
-
... More
UPVC Ventilator
Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work (pwd sor p.no 71)
4
-
-
... More
FRP Door Sutter with FRP Door Frames made out of FRP Sheets of 3mm thick of over all size 65mm x 50mm with rebate suitably reinforced using MS Angle / Flats, cost of holdfasts and Solid Core FRP Shutter Panel of 5mm thick and hollow core frames of 3m wall thickness for styles and rails etc., of sizes specified by Engineers
12.850000000000001
-
-
... More
Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification
22100
-
-
... More
Fabricating supplying and fixing of Polycarbonate Sheet with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.6 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.
459
-
-
... More
Providing and fixing Bitumen Pad for Expansion joint in between pavement slabs to 12mm thick and fixed as shown in the drawing including cost and conveyence of expansion joints including shalimar pad and joint sealent etc, complete as per standard specification
601
-
-
... More
Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI Pipe of dia not less than 40mm, with copper earth plate of size 600mm x 600mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.
4
-
-
... More
Supply and run of 50mm x 6mm Aluminium flat with necessary clamps / supports on wall / floor / ground for earth connection and etc to complete the work.
131
-
-
... More
Supply and run of 50mm x 6 mm Cu flat with necessary clamps / supports on wall / floor / ground for earth connection and etc to complete the work.
32
-
-
... More
MV Panel -LIGHTING PANEL : Design, supply, fixing, testing and commissioning of cubicle type floor mounting switch board comprising of the following, the board shall be fabricated as per the detailed specification enclosed.Incoming 1 No: 250A TPN 36 kA MCCB with Changover Switch
Incomers shall have 1 set - Digital Combined meter (Having the parameters of Ammeter,Voltmeter and KWH meter).1 set - LED type RYB,ON,OFF,TRIP indication lamps.Panel mounted Earth Leakage Relay with Leakage current display.1 set -100 /5A CT CL 1.0 10VA.
Outgoings:
19 Nos - 63 A 36KA TPN MCCB.1 No - 250 A 36KA TPN MCCB
2 Nos - Multifunction Meter digital type / MFM 5010 LED meter CI 0.5S with RS485.Note : All the Outgoing feeder shall be having 'on',off,trip' indication lamps..All switch boards shall be fabricated as per the detailed specification enclosed. Suitable size outgoing cable chamber and extra busbars should be provided for connecting the number of outgoing cables as per the schematic drawing. The board shall be fabricated for future extension of the panel board. Note:-The panel should be having provision to monitor the On, Off, trip status.
BUS BAR RATING:
400A TPN 36 KA for 1 sec. Cu.bus bars (Current Density not less than 0.8A/Sq.mm.) with colour coated heat shrinkable PVC sleeves with DMC/SMC bus bar supports and suitable earth bus.
Earthing : 25 x 6mm Cu. flat .
Cable Entry & Exit : Top.
Cable Gland Plate : 3mm thick MS sheets
Note: All MCCBs shall have rotary handle mechanism and spreader wherever necessary.
1
-
-
... More
Fabrication, Supply, Erection, Testing and Commissioning of whether proof CRCA sheet steel powder coated Indoor panel board, made up of 2 mm powder coated, including bus bar provision of double door with industrial lock with main 160A,TPN MCCB I/C and 4nos 32A TP MCCB & 4Nos 63A TPN MCCB for O/G with suitable copper bus bar (25x6mm) having three phase Digital volt and ammeter with line indicators for erecting the Indoor panel board suitable for mounting on wall surface with internal wiring and earth connections. The above panel board is to be erected with anchor fastner, bolt and nut or suitable angle etc.,
1
-
-
... More
Supply and fixing of 7 segment 4 way TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 4 ways in each segment) and seperate provision for MCB / Isolators ( totally 12 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only.
8
-
-
... More
Supply and fixing of 7 segment 8 way TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 4 ways in each segment) and seperate provision for MCB / Isolators ( totally 12 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only
1
-
-
... More
Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double
door (metal) with 1 no. 40A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing in flush
with wall with earth connection only.
1
-
-
... More
Supply, Erection, Testing and Commissioning of the following Type outdoor lighting distribution panel with individual segegration chamber with MCCBs / MCBs /ELCBs, / RCCBs , Phase segegration Timer and contactor manufacturer's sheet 16SWG enclosure for with provision for cable entry boxes, with Outdoor application IP65 as specified Protection, fixed on the floor with all interconnections and accessories, pedestal frame with concrete grouting or suitable to fix at concrete plinth as per the Corporation/ Highway department requirement. Incomer 40 A TPN MCB with Timer control On/OFF Outgoing : 20 A DP RCCB -30mA - 18 Nos
1
-
-
... More
Supply and Laying of 31/2C x 120 Sq.mm PVC armoured LTUG aluminium cable in existing trench, hume pipe, tray etc, The Rates complete including transport charges of UG cable.
90
-
-
... More
Supply and Laying of 31/2C x 95 Sq.mm PVC armoured LTUG aluminium cable in existing trench, hume pipe, tray etc, The Rates complete including transport charges of UG cable.
50
-
-
... More
Supply and Laying of 31/2C x 70 Sq.mm PVC armoured LTUG aluminium cable in existing trench, hume pipe, tray etc, The Rates complete including transport charges of UG cable.
50
-
-
... More
Supply and Laying of 31/2C x 35 Sq.mm PVC armoured LTUG aluminium cable in existing trench, hume pipe, tray etc, The Rates complete including transport charges of UG cable.
120
-
-
... More
Supply and Laying of 31/2C x 25 Sq.mm PVC armoured LTUG aluminium cable in existing trench, hume pipe, tray etc, The Rates complete including transport charges of UG cable.
280
-
-
... More
Supply and Laying of 4 x 10 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.
700
-
-
... More
Supply and fixing of brass cable gland for 31/2C x 120 Sq.mm PVC LTUG armoured cable with earth connection
5
-
-
... More
Supply and fixing of brass cable gland for 31/2C x 95 Sq.mm PVC LTUG armoured cable with earth connection
5
-
-
... More
Supply and fixing of brass cable gland for 3-1/2 x 70 sq.mm. PVC armoured LTUG cable with earth connection
4
-
-
... More
Supply and fixing of brass cable gland for 31/2C x 35 Sq.mm PVC LTUG armoured cable with earth connection
4
-
-
... More
Supply and fixing of brass cable gland for 31/2C x 25 Sq.mm PVC LTUG armoured cable with earth connection
12
-
-
... More
Supply and fixing of brass cable gland for 4C x 10 Sq.mm PVC LTUG armoured cable with earth connection
32
-
-
... More
Supply and providing cable end termination of 31/2C x 120sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping with electrical connection complete.
5
-
-
... More
Supply and providing cable end termination of 31/2C x 95sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping with electrical connection complete.
5
-
-
... More
Supply and providing cable end termination of 31/2C x 70sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping with electrical connection complete
4
-
-
... More
Supply and providing cable end termination of 31/2C x 35sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping with electrical connection complete.
6
-
-
... More
Supply and providing cable end termination of 31/2C x 25sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping with electrical connection complete.
13
-
-
... More
Supply and providing cable end termination of 4C x 10sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping with electrical connection complete.
7
-
-
... More
Wiring, testing and commissioning of 2Rx1.5sqmm (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe with 2 mm thick, ISI marked concealed in wall and ceiling with PVC accessories with Module GI Switch Box in flush with wall with 6A one way module switch with module front plate continuous earth wire connection by 2.5sq.mm PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light / Fan Point (for electronic) (Primary Point)
64
-
-
... More
Wiring, testing and commissioning of 2Rx1.5sqmm (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe with 2 mm thick, ISI marked concealed in wall and ceiling with PVC accessories with Module GI Switch Box in flush with wall with 6A one way module switch with module front plate continuous earth wire connection by 2.5sq.mm PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light / Fan Point (for electronic) (Secondary Point)
83
-
-
... More
Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling with MS accessories with Module GI switch box in flush wall with 6A one way module switch with module front plate with continuous earth wire connection of 14 SWG TC wire forand making good of the concealed portion with painting of suitable colour for conceale MS conduit Light point / fan point (for electronic regulator) (4 points / Coil) Higher End( MS Point wirng Primary)
4
-
-
... More
Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling with MS accessories with Module GI switch box in flush wall with 6A one way module switch with module front plate with continuous earth wire connection of 14 SWG TC wire forand making good of the concealed portion with painting of suitable colour for conceale MS conduit Light point / fan point (for electronic regulator) (4 points / Coil) Higher End( MS Point wirng Primary)
5
-
-
... More
Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling with MS accessories with Module GI switch box in flush wall with 6A one way module switch with module front plate with continuous earth wire connection of 14 SWG TC wire forand making good of the concealed portion with painting of suitable colour for conceale MS conduit Light point / fan point (for electronic regulator) (4 points / Coil) Higher End secondary point-With Out Switch
3
-
-
... More
Supply and run of 2 of 2.5 sqmm (36/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection 1 of 2.5 sqmm (36 /0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade and making good of the concealed portion with suitable colour.
600
-
-
... More
Supply and run of 2 of 4 sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe concealed wall and ceiling with continuous earth wire connection 1 of 2.5 sqmm (36 /0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade and making good of the concealed portion with suitable colour.
240
-
-
... More
Supply and fixing of 1 no.6A two module 5Pin socket , 1 no. 6A one module switch with modular cover Plate (Plastic) on suitable module concealed Box ( GI ) in flush with wall with connections.
24
-
-
... More
Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with modular cover Plate (Plastic) on suitable module concealed Box (GI ) in flush with wall with connections.
34
-
-
... More
Supply and fixing of 1 no 25A Flush type Wall Socket with 25A DP MCB for AC Plug .AC socket
13
-
-
... More
Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18")
26
-
-
... More
Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with modular cover Plate (Plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End ( SD-488) 20 A Geyser socket all higher end
12
-
-
... More
Supply and fixing of 20W, 4FT LED fitting with LED on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work.
75
-
-
... More
Supply and fixing of 18W LED 3000 K round type recessed light on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work
20
-
-
... More
Supply and fixing of 18W LED 2 ft mirror light on wall with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work.
6
-
-
... More
Supply and fixing of 24W, 4000K Type Square type recessed fitting with LED Down light on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work.
28
-
-
... More
Supply, installation, testing and commissioning of 100 W LED Round High Bay Light fitting in PDC Housing suitable for Ceiling / roof sheet mounting, The luminaire has efficacy of 125 lm/w .ITt has 10KV SPD & IP 66 additional safety chain with made out CRCA powder coated body and including electronic drivers, day light colour LED lamps, inter connecting wiring with suitable fixing clams, hooks as required including accessories all inclusive (Cat. Ref. Philips Make BY615P LED150S 5700 WB PSU GR or Equalant)
2
-
-
... More
Supply and fixing of LED Flood Light 150W with Integrated Driver Superior finish etc., complete. The rate inclusive of all taxes and transportation charges etc.
5
-
-
... More
Supply and fixing of 10W Bulk Head LED Fitting with Surface mounted LED luminarie Superior finish etc., complete. The rate inclusive of all taxes and transportation charges etc., complete ( Cat. Ref. Philips Make; WT202W LED10S or Equalent).
2
-
-
... More
Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall
14
-
-
... More
Supply and fixing of 300mm(12")sweep (Heavy duty) AC Exhaust fan complete with necessary wall opening and making good of the wall and wiring to the near by point with 1.5 sqmm FRLS PVC insulated copper wires including necessary accessories and hardware's as required.
5
-
-
... More
supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 48W LED street light fitting with LED (Higher end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED steet light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour.
14
-
-
... More
Supply and Laying of GI Hot Dip / Powder Coated 16 SWG Cable Tray with 150mm width and 50mm height.
50
-
-
... More
Supply and Laying of GI Hot Dip / Powder Coated 16 SWG Cable Tray with 300mm width and 50mm height
50
-
-
... More
Supplying and fabricating of MS structural steel supports of size 450mm x 150mm for various applications using U channels, MS angle iron, bolts, nuts, anchor bolts etc., required for the work, cut to the size, bent to shape, welding, grouting etc., complete. Supports shall be powder coated with required colour for different system as mentioned above.
66.66333333333333
-
-
... More
6 Metre Length Single Bracket Pole with Base Plate(250 x 250 x 6mm)76.10mm OD x 3.65mm Thick x 6000mm Length
PWD SOR P.NO 215
14
-
-
... More
supply and fixing of 30W LED street light fitting with LED (Higher end) with 25 mm dia. GI pipe (class B) with 1 no. 25 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting . (SD-455)
14
-
-
... More
First Aid Box complete with all First Aid Medicines
2
-
-
... More
Shock Treatment Chart fixed in glass frame
2
-
-
... More
Fire Extinguisher Co2, 4.5 kg. confirming to TAC Norms
2
-
-
... More
Danger Board as required by the Electrical Authorities
2
-
-
... More
2m x 1m Rubber Mat suitable for 11 KV installation confirming to IS (M-1976) (5 set)
2
-
-
... More
Hand Gloves 11KV Grade M-1980
2
-
-
... More
Earth Discharge Rod M-1983
2
-
-
... More
Supply and kept in position of 9 litres capacity Fire Buckets of 4 Nos. with Bucket Stand as per standard specifications and as directed by the Departmental Officers
5
-
-
... More
Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc, complete as per standard specification and as directed by the Departmental Officers.
4
-
-
... More
Supply and fixing of CO2 Gas Type 2 kg. capacity Fire Extinguisher as per New IS15683, complete with control valve, discharge hose with horn, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc., complete as per standard specification and as directed by the Incharge.
4
-
-
... More
Supplying and fixing in position White / Colour Special Delux Model Glazed Cascade Type Parryware / Hindware / Equivalent Wall Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) with 10 litres capacity flushing tank with all internal dual flush fittings with normal seat cover Wall Fitting.PWD SOR P.NO :97
5
-
-
... More
Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap confirming to IS:2556 - Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers.
4
-
-
... More
Supplying and fixing of CP Two Way Bib Cock with Health Faucet (Make:Jaquar Model: ALD-573) ,wall hook & one metre long flexible tube including cutting and making good the walls wherever required etc complete. complying with standard specification and as directed by the Department officers. The quality and make of health faucet should be got approved by Concern department Engineer before use on work.
5
-
-
... More
Wash Hand Basin (Make Jaquar,Model no:CNS-WHT-813)of size 420 mm X 420 X155 mm with all accessories such as cast Iron Brackets, 32 mm Dia C.P. Waste coupling, Rubber plug and Chain, 32 mm dia ' B ' Class G.I. Waste pipe, 15 mm Dia G.M Wheel valve; 15 mm Dia Nylon connection, 15 mm Dia Brass Nipples, 15 mm C.P. Pillar tap etc.,including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and as directed by the Department officers. The quality and make of below counter Wash basin should be got approved by department Engineer before use on work. ( all Inclusive of cost of basin, Bottle Trap and Angle Cock)
8
-
-
... More
Supplying and fixing Lipped Mouth Porcelain Flat Back Urinal(white colour) of size 355x340x535mm (Make:Jaquar,Model:URS-WHT-13261)with all accessories such as urinal censor(Make:Jaquar,Model no:SNR-STL-51077E),32mm dia Bell Mouth PVC Connection, 15mm dia GM Wheel Value, 15mm dia 'B' Class GI Waste Water Pipe, 15mm dia Nylon Connection, 15mm dia Brass Nipple, and suitable screws, shellac etc., complete. The rate including cost of all materials, labour charges for fixing and transportation etc. completed as directed by Engineer-in-Charge.
4
-
-
... More
Providing and fixing in position vertically marble partition in the urinals with Raj Nagar marble stone of white hard, dense hemogenious colour without cracks, and fissures of size (3.0+2.0)5'height thickness varies from 18 to 20mm including making grew in the wall and pointing and packing with cement mortar 1:3 polishing, finishing on both sides etc., as directed at site. (jaquar make)
5
-
-
... More
Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed Various Sized and 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks) .
-
-
-
... More
Size 600X450X5.5mm Thk
6
-
-
... More
Supplying & fixing in position 15 mm dia brass/ C.P pillar tap (Heavy duty) of approved make conforming to I.S. Specifications & quality including cost of shellac, thread etc., complying with standard specifications & including cutting & threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the work).
10
-
-
... More
Supplying & fixing in position PVC Nahini / Floor trap of size 100x75mm including stainless steel gratings of approved brand & quality, fixed over a bed of brick jelly lime concrete 1:2:5 ( One part of lime, two parts of sand & five parts of 40 mm size brick jelly ) & finished with cement mortar 1:3 ( One cement & three sand ) including dismantling masonry works wherever found necessary & making good the damaged portions to the original condition & giving connections to the cast iron pipes etc., complete, complying with standard specification. (The PVC Nahini / Floor trap should be got approved by the Executive Engineer before use on works ).
10
-
-
... More
Supplying & fixing in position 150 X 100 mm square mouth 'P' or 'S' trap stone ware Gully trap 'A' grade with cast iron gratings of size 300 X 300 mm with C.I. air tight cover with frames of size 300 X 300 mm at bottom & top respectively with necessary earth work excavation, laid over a bed of brick jelly cement concrete 1:3:6, 150 mm thick using 20 mm size broken brick jelly including necessary block work & plastering, &including dismantling masonry wherever necessary & redoing the damaged portions to the original condition & by using cement concrete 1:3:6 using 20 mm stone jelly for fixing the Gully trap & giving connections to the stone ware sewer line etc., complete, complying with standard specification. (The stone ware gully trap should be got approved by the Executive Engineer before use on works ).
2
-
-
... More
Construction of inspection chambers of following sizes 60 x 60 x 90cm with earth work excavation for foundation with 23cm thick brick jelly cement concrete bed in C.M.1:4:10 using 40mm Brick jelly for foundation, brick work in C.M. 1:6 for chambers, plastering with C.M.1:3 12mm thick, benching, channelling, 75mm thick RCC loose slab covering in C.M.1:2:4 mix using 20mm blue granite jelly including necessary reinforcement, etc., complete ( GCC Buildings SOR 2023-2024 , Pg No.45, Si.No.383, Schl.No.715)
4
-
-
... More
Supplying and fixing in position the best quality and variety sizes PVC soil and waste pipes 6Kg /10Kg / cm2 of ISI mark, providing leak proof joints etc and making connection to all sanitary fittings, including dismantling masonry / RCC works wherever necessary and making good the portions. The quality and make of PVC pipes and specials should be got approved by Concern department Engineer before use on work.
-
-
-
... More
110mm Dia Pipe
100
-
-
... More
75mm Dia Pipe
50
-
-
... More
50mm dia pipe
22
-
-
... More
Supplying, laying and jointing UPVC pipes of approved quality and best variety conforming to ISS and with ISI mark of the following size including cutting, threading and fixing PVC specials but excluding cost of such specials and fixing to wall with necessary teak wood plugs, PVC clamps and screws, making good the portions to original condition with necessary brick work and concrete plastering wherever necessary with necessary scaffolding charges etc. complete complying with standard specification and as directed by the Department officers. The quality and make of UPVC pipes and specials should be got approved by Concern department Engineer before use on work.
-
-
-
... More
20 mm dia UPVC pipe
50
-
-
... More
25 mm dia UPVC pipe
310
-
-
... More
32 mm dia UPVC pipe
330
-
-
... More
Supplying & fixing in position first quality & approved variety of various dia U.P.V.C Ball Valves ( Heavy type ) with I.S.I. Mark of the following size including cost of Shellac, thread etc.,including labour for cutting & threading of Pipes etc., complete complying with standard specifications for both internal & external water supply arrangements.
-
-
-
... More
32mm dia
6
-
-
... More
Supplying and fixing in position first quality and approved variety of Gun Metal /brass valve /airrelease valve /Check valve (Heavy type)with ISI mark of the following sizes including cost of Shellac,thread etc,including labour for cutting ,threading and fixing position of CPVC Pipes for both internal external water supply arrangements etc,complete complying with standard specification and as directed by the Department officers. The quality and make of valve should be got approved by Concern department Engineer before use on work
-
-
-
... More
32mm dia
4
-
-
... More
Supply ,erection and testing & commisioning of 2HP submersible pumpset in the to suit 200mm borewell of capacity of 4800 LPH @ 265Ft, max. total head of 280 Ft pumps fitted with bronze impellers and having delivery size of 40mm - 430V along with 3mts cable and manufactures standard control panel which is mandatory and as directed by the officer incharge and other required supporting items like SS hose nipple, nylon rope, clamps, bolt and nuts,GI nipple, 50mm dia HDPE hose of required length etc completed and as directed by the officer incharge.
1
-
-
... More
Supply & Fixing of PVC Water tank. Brand Syntex including all accessories & Transporation
-
-
-
... More
3000 ltr Tank
2
-
-
... More
Add GST 18%
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%