Municipal Administration And Water Supply Department Tender

without props

with props

Plain cement concrete of mix 1:3:6 (One Cement, three sand and six aggregate) using 40mm ISS HBG metal from approved quarry including cost and conveyance of materials to site and all labour charges etc., complete asper standard specification.

Plastering with Cement Mortar 1:4 mix, using 20mm thick with all cost and convleyance of materials and all labour charges etc., complete as per standard specification

Supplying, fabricating and placing in position of M.S./R.T.S. rods for cutting, bending, straightening of rods and tying the grills for reinforcementwith necessary binding wire including all cost and conveyance of materials to site with all labour cost etc., complete as per standard specification

Providing and laying in position standardized concrete Mix M-20 Grade (design mix) in accordance with IS 456-2000 using 20mm and below graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without impairing strength and durability with about (5.0cum), 7730kg of 20mm machine crushed stone jelly and with about (3.3cum), 5156kg of 10 – 12mm machine crushed stone jelly and with about (4.79cum) 7670kg of Q.dust, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers – The Coarse and Fine aggregates to be used should comply with the requirements of IS Standards.

Supplying and fixing the MS Grill grating for Drainage all cost and labour etc

Plain cement Concrete mix 1:2:4 (One Cement, Two sand and four aggregate) using 20mm ISS HBG metal from approved quarry including cost and conveyance of materials to site and all labour charges etc., complete asper standard specification

Supplying and laying Rubberrrised interlocking paver block M40grade pprroviding and laying of 83 mm thick high strength type confirming IS 15658-2006 OF 2006 of rubberised interrlocking pawverrblock in sizd of minium comporessicve strength of 40 N/mm2 in uniform shsape of approved stone cushion below the uniform shape mnon skitting including level;ling the base preparation of paverrs as sub base ,stone dust cushion 150mm thick laying out of pavement cut the pieces to fix the edge edge vibring the paverrs ,sweeping the trtansportring loading unloading of paverblock as per standard specification.