Municipal Administration And Water Supply Department Tender

Advance Patch Work 13.20 mm Providing Advance Patch work using 50 mm consolidated Thickness by using 1 M3 of 13.20mm IRC Metal with 44 KG of Bitumens per 1 M3 of Metal for pre mixing for existing surface advance patch work including cost and conveyance of materials to the work iste and stacking them to teh dept metric guage for the pre measurement, heating the bitumen in bitumen boiler, heating the aggregates and mixing , them with bitumen in mini hot mix plant for premix carpet only rolling by 60-70 KN Power roller for premix carpet and seal coat seperately including labour charges for spreading the mix for premix carpet application of bitumen for seal coat over premix carpet, including labour charges for spreading seal coat separately over premix carpet etc., including higher charges and fuel charges for bitumen boiler and all other tools and plant empolyed etc., complete as per of MOR111Rev-V Specification

Providing and laying tack coat of 2kgs/10 sqm over the BT surface treated with binder using 2 kgs of bituminous Emulsion (RS) for 10square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Specifications

Providing and laying Bituminous concrete to 30mm thick using 0.13 cum of 19.00-9.50mm , 0.17 cum of 9.50-2.36mm and 0.26 cum of 2.36 and below with 45.27 kgs (add 10% plastic waste) of VG30/ VG40 bitumen, 4.00 kg plastic for premixing per 10sqm including cost and conveyance of all materials to CMP site heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity , conveying the mix by tipper trucks to paver site , spreading the mix to uniform thickness of 30 mm with mechanical paver to the specified grades and cross sections and consolidated by 80-10 tonne vibratory/ pneumatic roller to the required density etc., including labvour for attending to paver site etc., including hire charges and fuel charges for 20-30 t CMP with bitumen boiler , tipper trucks , paver finisher /9m paver finisher , vibratory / pneumatic roller and all other tools and plant required , including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 507 of MORTH Rev-5