Municipal Administration And Water Supply Department Tender

Replacement of New 600mm Circular Machine Hole FRC Manhole Covers / Frames for Inspection Chamber as per Below specification and Standards etc Complete,. a.Labour for cutting open road for laying water mains or sewer in B.T. Roads (or) Maccadam road etc.., Complete as per Standard Specficition (TWAD SOR 2024-25 P.no-195)b.Supply and delivery of following sizes of FRC Manhole Covers / Frames to stores on as per IS 12592:2002 to its latest revision with reinforcement details for covers and frames. (TWAD SOR 2024-25 P.no-81)C.Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 ( PWD SOR 2024-25 )D.Plain Cement Concrete 1:1.5:3 (One part of Cement, one and half part of Crushed Sand (M- Sand), three coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification ( PWD SOR 2024-25 )E.Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and Eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification ( PWD SOR 2024-25 )