Municipal Administration And Water Supply Department Tender
... More
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
Municipal Administration And Water Supply Department - MAWS Tender
Civil And Construction
Water Storage And Supply
Eprocure
Opening Date14 Feb 2025
Closing Soon28 Feb 2025
Tender Amount₹ 6,30,00,000
AI Insights
Technical
Technical
Bid Capacity
... View More
Assessed Available Bid capacity = (A*N*1.5) – B Where: A = Maximum value of civil engineering works executed in any one year during the last three financial years (updated to 2015-16 price level @ 6.00% per annum) N = Number of years prescribed for completion of the works for which bids are invited, which is Nine Months. B = Value of existing commitments and on-going works to be completed during the next One year (updated to 2015-16 price level).
Technical Capacity
... View More
The bidder is required to have prior work experience in civil engineering works, with experience certificates issued by an officer not below the rank of Executive Engineer. The certificates should contain details such as the name of the scheme, contract number and date, value of the contract, and period of completion. The bidder's experience in similar works completed in the last five years is considered, with a total monetary value of civil engineering works. The bidder should have satisfactorily completed at least one civil work in a single contract in the last five years, with a value of at least 25% of the value put to tender. The bidder should have minimum aggregate experience in specific areas, including pipe laying work of at least 1000 m, construction and commissioning of a sewerage treatment plant of at least 1 MLD capacity, and supply, erection, and commissioning of a pump set of at least 10 HP. The bidder should also have an average annual turnover of at least 80% of the value put to tender for the last five financial years. The bidder should have a net worth of at least 10% of the value put to tender and a minimum cash flow of at least 10% of the value put to tender. In terms of specific values and percentages of similar works completed, the bidder should have completed at least 200% of the total length required (in KM) per year for pipes, and at least 50 units per year for pumps, and at least 200 units per year for valves. The bidder should also have a minimum of 5 years of experience in production and sales of the goods offered. The bidder should have experience in works of similar nature and magnitude, with a minimum value of the contract and a stipulated period of completion. The bidder should have a performance certificate issued by an officer not less than the rank of Executive Engineer, with a minimum value of the contract and a stipulated period of completion. The amount of similar works completed is not explicitly mentioned in all cases, but the bidder should have a minimum average annual construction turnover of at least the bid amount, with the average calculated over the last five financial years. The bidder should have completed similar works with a value of at least the bid amount. The bidder should have a minimum net worth balance amount in the bank equal to 10% of the value put in tender, and the bidder should have similar nature of work experience in execution and commissioning of Sewerage System, including design and construction, with a value of at least Rs. 157.50 Lakhs (not less than 25% of the value put to tender) in one single assignment in any one year during the last 5 years. The bidder should have experience in supply, installation, and commissioning of at least one 10 HP capacity pump set during the last 5 years, and a minimum aggregate experience of 1000 m length Pipe laying work during the last 5 years. The bidder should have experience in works of similar nature and magnitude, with details to be furnished, and should have completed works of similar nature and magnitude during each of the previous five financial years. The bidder's experience shall be validated by submission of Performance Certificate/ Experience Certificate issued by a competent authority. The total monetary value of Civil Engineering works performed during each of the last five years should be furnished. The bidder should have a minimum average annual construction turnover of at least the bid amount, with the average calculated over the last five financial years, and the bidder should have a performance certificate issued by an officer not less than the rank of Executive Engineer, with a minimum value of the contract and a stipulated period of completion. The bidder should have experience in works of similar nature and magnitude within a period of 5 years, with a minimum value of the contract and a stipulated period of completion, and the bidder should have a performance certificate issued by an officer not less than the rank of Executive Engineer. The percentage of similar works completed is not explicitly mentioned in all cases, but the bidder should have completed at least 200% of the total length required (in KM) per year for pipes, and at least 50 units per year for pumps, and at least 200 units per year for valves, and the bidder should have a minimum of 5 years of experience in production and sales of the goods offered. The bidder should have a minimum average annual construction turnover of at least the bid amount, with the average calculated over the last five financial years, and the bidder should have a performance certificate issued by an officer not less than the rank of Executive Engineer, with a minimum value of the contract and a stipulated period of completion. The bidder should have experience in works of similar nature and magnitude within a period of 5 years, with a minimum value of the contract and a stipulated period of completion, and the bidder should have a performance certificate issued by an officer not less than the rank of Executive Engineer. In summary, the bidder should have prior work experience in similar works, with a
Costs
EMD
₹ 6,30,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Construction Of Collection Well Drain I D Pumping Room And Supply Delivery Laying Of Pumping Mainline For Stp In Idappadi Municipality
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MAWS_524798_1Tender No
2141/2019/E1Tender Authority
Municipal Administration And Water Supply Department ViewPurchaser Address
-Website
http://https://www.tn.gov.in/maws/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Removal of Excavated Excess Earth away from the site to 5K.M including loading and transportation charges etc, complete as per standard specification. For 1M3
290
-
-
... More
Supplying and filling the basement with Good Earth filling in layers of not more than 15cm thick well rammed watered and compacted - etc., complete complying with standard specification.
29
-
-
... More
Refilling with excavated earth other than sand with an initial head load of 100 mts. and depositing the earth as shown by the departmental officers in layers well rammed, watered and consolidated etc. complete complying with standard specification
184
-
-
... More
Supplying and filling in foundation, basement, etc with filling sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.
386.5
-
-
... More
Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification
419.5
-
-
... More
Plain cement concrete 1:2:4 mix (One cement two sand and four aggregate) using 20mm ISS metal including mixing, laying, consolidating, curing cost and conveyanc of all materials to site and all labour charges etc., complete as per standard specification
1663
-
-
... More
Providing and laying in position (SRC )Standardised Concrete Mix M-30 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 400Kg/ cum and maximum water cement ratio of 0.45 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone sand (M- Sand) but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards.
159
-
-
... More
Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton.
-
-
-
... More
Upto 90 cm
12928
-
-
... More
Upto 3.2cm
911.5
-
-
... More
Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.
24759
-
-
... More
Brick work in CM 1:5 (one cement & five sand) using III class Country bricks of size 83/4"X4 1/4"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT
53.5
-
-
... More
Providing 12 mm thick cement plaster in one coat in external surface with 1:5 cement mortar mixed including scaffolding and curing and also complying with standard specifications and instructions of the engineer in charge.
2302
-
-
... More
Providing 20 mm thick cement plaster in one coat in 1:4cement mortar mixed with water proofing agent , including scaffolding and curing and also complying with standard specifications and instructions of the engineer in charge.
1143
-
-
... More
Supplying and fixing in position best quality P.V.C soil/ waste pipes (6KSC) of various sizes having ISI mark and providing leakproof joints including fixing to the wall with P.V.C/ M.S clamps etc., and making connection to all sanitary fittings, dismandling masonry/R.C.C. works wherever necessary and making good the dismandled portion to the original condition, complying with standard specifications.
-
-
-
... More
110mm Dia PVC Pipe
16
-
-
... More
Supply and delivery of submersible centrifugal sewage non-clog pumps, vertical spindle type pump , wear resistance with submersible motor for the various duty conditions. Pump shall be capable of handling min 100 mm solid size with sewage specific gravity of up to 1.05. Pump shall be of robust construction, Liquid passages shall be finished smooth and designed as to allow free passage to solids. Pump Impeller should be of Non-clog semi open type , single vane / multi vane preferably contra bloc or vortex impeller design. Double mechanical seal with silicon carbide faces should be provided to protect the motor from ingress of sewage along the shaft. The critical speed of the rotor shall be at least 30% above the operating speed. Pumps should have double bearings between the pump & motor. The bearings life shall be minimum 100,000 hrs of operation with greased for life. Pump should be provided with automatic coupling device including pedestal, duck foot bend, stainless steel guide pipe or related accessories of suitable size to facilitate lifting and lowering into guide rails for easy maintenance. Pump shall be provided with a stainless steel lifting chain conforming to BS 970 Gr 304. Pump speed shall be of 9600 rpm for high duty pumps and 960/1450 rpm for low duty pumpsets. Casing and impeller should be of CI Gr. FG 260:IS210 more preferably with hardened impeller.Shaft shouldbe of stainless steel AISI 410. All the fasteners and bolts shall be of AISI 410.The submersible motor shall be operatedwith 3ph, 415 V(+or– 10%), 50Hz(+or-5 %) dry induction type. Motor shall be capable of giving rated output withoutreduction in the expected life span when operated continuously. The rotating assembly shall be dynamically balancedas per standards. The starting current of the motor shall not exceed 200% of rated full load current for Star / Delta orATS starting under any circumstances .The motor shall be suitable for full voltage star delta / ATS starting. The lockedrotor current of the motor shall not exceed 600% of full load current unless otherwise specified. Motor shall be
designed to withstand 120% of rated speed for two minutes without any mechanical damage, in either direction of
rotation. The motor vibration shall be within the limit specified in applicable standards . Motor should be of IE2,
explosion proof compatible for VFD operation together with star-Delta /ATS starter, protection against increase in
stator winding temperature (15 deg Celsius), bearing temperature, leakage in the stator housing and terminal box shallbe provided and to be suitably interlocked with the control panel for tripping the pump in case of increase in
temperature beyond set limit. Insulation class shall be of “Class H” and degree of protection shall be of IP 68 as per IS
4691. Motor shall be suitable for continuous operation in fully submerged or partially submerged condition.The
pumpset shall be supplied with power cable of PVC insulated and PVC sheathed, copper, flexible, round type with required conductor size and number of cores as per starting method and of specified length for continuous use under water and air. The control cable of PVC insulated, PVC sheathed, flexible for stator winding temperature sensor 3core x 1.5 sq.mm copper conductor and for bimetallic switches 2core x 1.5 sqmm copper conductor shall be provided. Motor shall be supplied with 10m of round submersible copper cable of suitable size. The non clog submersible pumpset shall be provided with suitable starter control panel having all protections as mentioned above. (upto 5 HP - DOL Starter, above 5 HP to 25 HP -Star Delta Panel and beyond 25 HP shall be ATS)
18
-
-
... More
Labour for cutting open road for laying water mains or sewer.
-
-
-
... More
BT Cutting
295
-
-
... More
CC Cutting
280
-
-
... More
Earthwork excavation for pipeline work other than loose soil loose with bed width less than 1.25m and depth not more than 2.0 m, the quantities may be worked out seperately
-
-
-
... More
140mm HDPE pipe
9112
-
-
... More
Refilling with excavated earth for pipeline other than sand with an initial head load of 100 mts. and depositing the earth as shown by the departmental officers in layers well rammed, watered and consolidated etc. complete complying with standard specification
-
-
-
... More
140mm HDPE pipe
9112
-
-
... More
Supply and delivery of HDPE pipes (Sewage Pipes) of required diameter conforming to IS 8360/1977/Part I(Reaffirmed 1992) to withstand continous internal hydroulic pressure of 10 kg/cm2 including necessary fixtures and fittings, such as bends, tees, single junctions, double junctions and joining with rubber rings and lubricants, on wall by means of clips or in ground including necessary excavation, laying refilling, trench testing etc. complete. (Prior approval of sample and brand by Engineer in charge is necessary before use.)
-
-
-
... More
140mm HDPE pipe
9112
-
-
... More
Lowering HDPE pipes and specials to trench and laying to proper grade and alignment and as directed by the department engineers
-
-
-
... More
140mm HDPE pipe
9112
-
-
... More
Jointing HDPE Pipes and Specials by butt fusion welding / electro fusion welding joints using fusion equipment as per ISO 21307-2011 and as per IS 7634 (part-2) : 2012 including cost of hire charges for butt fusion equipment power supply arrangements etc., complete as per directed by Engineers
-
-
-
... More
140mm HDPE pipe
1518
-
-
... More
Testing of HDPE pipes for water supply with hydraulic testing equipment by filling with water (including cost of water) and testing to recommended pressure in convenient stretches and attending the bursts if any occured during the test, excluding the cost of pipes but including other incidential and operational charges etc., complete for the following diametres of pipes.
-
-
-
... More
upto 100mm
9112
-
-
... More
Provision for Goods and Service Tax @ 18%
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%