Municipal Administration And Water Supply Department Tender

Supplying and erecting centering for side and soffits including hecessary supports and strutting upto 3.29m high for plane surfaces such as side slabs of RCC boxing and similar vertical RCC slabs, FACIA, Drop etc., in all floor with all cross bracing using mild steel sheets of size of 90cm X 60cm and BG 10 stiffened with welded mild steel angles of size 25X25X3mm for boardinglaid over country wood joists of size 10cm x 6.5cm spaced at about 90cm C/C and supported by casurina props of 10cm to 13cm dia spaced at 7Scm C/C etc., completed as directed. SI.No.123B Part-II

Supplying and erecting centering for side and soffits including necessary supports and strutting upto 3.29m high for plane surfaces such as side slabs of RCC boxing and similar vertical RCC slabs, FACIA, Drop etc., in all floor with all cross bracing using mild steel sheets of size of 90cm X 60cm and BG 10 stiffened with welded mild steel angles of size 25X25X3mm for boardinglaid over country wood joists of size 10cm x 6.5cm spaced at about 90cm C/C and supported by casurina props of 10cm to 13cm dia spaced at 75cm C/C etc., completed as directed. SI.No.123B Part-II

Fty ash Brick work in CM 1:5 (one cement & five sand) using size 9"X4 3/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification -

Weathering course in concrete broken stone brick jelly 20mm size in pure slacked lime over RCC slab. The proporation being 32:12:5 for requuired slope and the thickness of as required and well beaten with wooden beaters etc., completed - 10 m3

Terrace flooring with one course of pressed tiles of size 23 X 23 cm in cement mortar 1:3 mix with impermo oil 2% by weight of cement and pointed with same oiled mortar

Supply of 160 mm Dia. OD PVC Preferated type casing pipeé kg /em2 with suitable wall thickness including the cost of coupling etc., complete

Reinforced Cement concrete 1:1.5 :3 (one cement, oneand half M Sand & three course aggregate) using 20mmgauge hand broken/ and broken granite stone for all RCCitems of works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rec works wherever necessary as directed by departmental officer etc., complete.

Supplying and fabricating and placing in position MS or RTS bar reinforcement to al RCC works as per the design given including cost of steel and bending wire also all floors

Plastering for RCC exposed surfaces such as sunshade, beam, roof ceiling, plastering 1:3 to 10mm thick including all cost etc complete

Plastering in CM 1:5 TO 12mm thick including all cost etc complete

Supply and fixing of mild steel door using all round ''L'' angle 25x25x6mm thick cross bracing 20x6mm MS flat with necessary locking arrangements including cost and conveyance etc size : 0.60x1.85=1.11m2

Supplving and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x S8mm and shutter profile are reinforcement with GiU/lem 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks also it operates asn handle. The corners and joints should be and cleaned. Radiations free pin headed plain or brown giass 4mm thick should be provided to the shutter and it not allow leakage of water even at most ranging storms and have key lockable action, security protective hinges, strong "systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that opening of the window, The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work

Painting with enamel paint two coats over one coat of primer coat for iron doors layer by layer with equal intervals using good quality approved colour paint including all cost etc complete

Paving the floor with vitrified floor tiles of size 60x60cm of approved brand and colour marbonite tiles in all 1 floors base layer of cement mortar 1:3 (one cement and three sand)20mm thick using first quality marbonite tiles of size 60x60cm and point with colour cement neatly and fixed in position so as to make perfectly smooth and to alignment etc complete complying with standard specification.

Wiring with 2x1.5sq.mm (22/3.0) PVC insulated unshedathed single core unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and celling with M.S accessories inflush with wall with 150mmx100mm x75mm MS swith box with 3mm thick hylum sheet cover for 5A 3 PIN NON INTERLOCKING cs PLUG WITH CONTINUOS EARTH WIRE connection of 14SWG TC wire and making good of the concealed portion with suitable colour for concealed plug point.

Wiring with 2x1.5sq.mm (22/3.0) PVC insulated unsheathed SC Ca. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessorie in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A switch with continous earth wire connection of SWGTC wire for making good of the concealed portion with suitable colour for PVC open light/Fan Point (For electronic regulator) (5 Points per coil)

Supply and fixing of Double pole 40 Amps MCP 240V/415 V 50 HZ-AC supply on suitable TW board including all cost ete complete.

Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condenser with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting etc, complete as per standard specifications SD-83

Painting with Emulson Two coats for walls layer by layer with equal intervals of time,using good quality approved colour paint including all cost etc complete.

Supplying and fixing Puff Roofing sheet of 50mm thickness and Rectangular hollow steel tubular box section of 98x50x3mm of including priming coat fixing in position with all necessary accessories complete complying with standard specification and a: directed by the departmental officers.

Supply and fixing Fabrication of M.S.Angle, M.S.Flat and M.S.Sheet extra completely with one coat red oxide primer including all labour charges and materials.complete complying with standard specifications and drawings and as Cost and Conveyance of all Cherges etc complete.

Conveyance of surplus earth from wrok site to city outer with average lead of 15 kmt including all cost etc complete