Municipal Administration And Water Supply Department Tender

Supplying and erecting steel centering for sides and soffits including supports and strutting upto 3m height for plane surfaces such as RCC Slabs, Rectangular beams TEE or ELL beams Lintel bed block stair case waist and landing slap for footing

Supplying and erecting steel centering for sides and soffits including supports and strutting upto 3m height for plane surfaces such as RCC Slabs, Rectangular beams TEE or ELL beams Lintel bed block stair case waist and landing slap for column

Supplying and erecting steel centering for sides and soffits including supports and strutting upto 3m height for plane surfaces such as RCC Slabs, Rectangular beams TEE or ELL beams Lintel bed block stair case waist and landing slap Grade Beam

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, Improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards. (No separate payment will be made by the Department for the excess usage of materials) -

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, Improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards. (No separate payment will be made by the Department for the excess usage of materials) -

Brick work in cement works 1:5 (One cement and five sand ) using best quality III rd Class country brick of size 83/4 x 41/4 x 23/4 including cost and conveyance of material to work site all albour charges and incidential charges curing etc, complete complying with standard specification

Plastering with cement mortar 1:5 (One cement and five sand) 12mm thick in all floors including cost and conveyance of all materials to site etc,complete as per standard specifications (S.I.306)

colour washing twocoats with good coloring pigments over newly plastered surface inculding cost and conveyance of all materials to site etc,complete as per standard specifications

Supply and fixing MS Grill with doors and windows with one coat of red oxide with primer including all cost of such as welding grinding and fabrication charges and cost and conveyence of all materials to site etc., complete as per standard specification.

Painting two coats over the new iron work with Ready Mixed Enamel Paint of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Refilling the excavated earth into trenches for required depth including all labour charges for filling etc., complete