Municipal Administration And Water Supply Department Tender

Reinforced cement concrete in 1:11/2:3[one cement and one and half sand and four the aggregate ] using 20 mm size IRC grade machine crushed chips and excludingcost of reinforcement and centering works and including the cost of mixing,laying , curing ,and etc.,complete complying with standard specification .

Supplying, fabricating and placing in position of Steel Reinforcement using Mild steel or Ribbed tor steel rods, for all RCC works as per the design given by the departmental officers including cost of steel and binding wire and all labour charges for cutting, bending, tying and placing in position etc, complete as per SS.

Supplying and erecting centering to sides and soffits including supports and strutting for drainage sides and culvert body wall sides using 90cm x 60cm and B.G 10stifened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding laid over( silver oak joists ) of size 10cm x 6.50cm spread at about 90cm etc. complete complying with standard specification .

Brick work In CM 1:5 mix using best country bricks of size 8 3/4 x 4 1/4 x 2 3/4' having 350kg/cm2 compressive strength and 15% or less water absorbentin the period of 24hours immersement and confirming to ISI specifications.and using the screened sand and all the materials should be approved by the competent technical authorities etc complete complying with standard specification--10m3 .

Plastering in cement mortar 1:5 mix 12mm thick using clean screened sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting for plastering for plastering and protecting from other damages till setting of mortar etc.complete complying with standard specification--10m2.

Providing and laying ,spreading and compacting graded stone aggregate to wet mix macadam (WMM ) soecification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications.

Supplying and laying Rubberized interlocking paver block M 50 grade providing and laying of 100mm thick high strength type conforming IS 15658 - 2006 of rubberized inter locking paver block in Size of miniumum comprssive strength of 50N/m2 in uniform shape of approved make to be laid. including the cost of paver blocks and conveyance of materials to work site mentioned in the tender schedule ,cost of loading and unloading handling during conveyance , laying the paver blocks over a M-sand bed,conveyance of Vibrator machine, conveyance paver block cutter to site and hire charges of vibrators and paver block cutters and labour charges for vibrator and paver block cutter operators and Labour for levelling the sand to the required alignment and paving the paver blocks etc complete to IS 15658 - 2006 specification. etc complete as per standard specification TAMIN Paver Block of size - Supply at site.

Providing kerb wall with Plain Cement concrete 1 : 2 : 4 (one cement, two sand and four aggregates) using 20mm ISS HBG metal including cost and conveyance of all materials and labour charges for mixing, laying, compacting and curing etc, complete as per SS.

GST 12 %