Municipal Administration And Water Supply Department Tender
... More
The MAWS has issued a formal invitation for competitive bids for the Municipal Administration And Water Supply Department project, for Improvement Of Water Supply System At Srivilliputhur Municipality in Virudhunagar, Tamil Nadu, with an estimated contract value of Rs. 9,85,00,000. The bid opening date for this tender is 26-05-2025 and the last date for bid submission is 29-05-2025. Interested bidders for Municipal Administration And Water Supply Department tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Municipal Administration And Water Supply Department - MAWS Tender
Civil And Construction
Water Storage And Supply
Eprocure
Opening Date26 May 2025
Closing Date29 May 2025
Tender Amount₹ 9,85,00,000
Costs
EMD
₹ 9,85,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MAWS_561488_1Tender No
9365/2025/P1Tender Authority
Municipal Administration And Water Supply Department ViewPurchaser Address
-Website
http://https://www.tn.gov.in/maws/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Open well excavation complying with relevant clauses of T.N.D.S.S. Well sinking and with lead upto 10 metre in Medium rock and dense medium rock not requring blasting 6m to 8m (304.81*4) PWD Pg No 29
330
10
-
... More
Open well excavation complying with relevant clauses of T.N.D.S.S. Well sinking and with lead upto 10 metre in Medium rock and dense medium rock requiring blasting 8 m to 10m (304.81*5) PWD Pg No 29
303
10
-
... More
Open well excavation complying with relevant clauses of T.N.D.S.S. Well sinking and with lead upto 10 metre in Medium rock and dense medium rock requiring blasting 10m to 12m (456.06*6) PWD Pg No 29
303
10
-
... More
Open well excavation complying with relevant clauses of T.N.D.S.S. Well sinking and with lead upto 10 metre in Medium rock and dense medium rock requiring blasting12m to 14m (456.06*8) PWD Pg No 29
303
10
-
... More
Open well excavation complying with relevant clauses of .N.D.S.S. Well sinking and with lead upto 10 metre in Hard granite measured in solid including blasting and stacking 14m to 16m (456.06*10)
303
10
-
... More
Open well excavation complying with relevant clauses of T.N.D.S.S. Well sinking and with lead upto 10 metre in Hard granite measured in solid including blasting and stacking 16m to 18m (893.53*12)
303
10
-
... More
Open well excavation complying with relevant clauses of T.N.D.S.S. Well sinking and with lead upto 10 metre in Hard granite measured in solid including blasting and stacking 18m to 20m (893.53*14)
303
10
-
... More
Open well excavation complying with relevant clauses of T.N.D.S.S. Well sinking and with lead upto 10 metre in Hard granite measured in solid including blasting and stacking 20m to 22m (893.53*16)
303
10
-
... More
Open well excavation complying with relevant clauses of T.N.D.S.S. Well sinking and with lead upto 10 metre in Hard granite measured in solid including blasting and stacking 22m to 23m (893.53*18)
153
10
-
... More
Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum First depth of 2 m For Sump
55
10
-
... More
Second Depth of 2 m For Sump
20
10
-
... More
First depth of 2 m
134.48
10
-
... More
Second Depth of 2 m
38.21
10
-
... More
The rates for earth work excavation and refilling for pipe line works having bed width of 1.25m and below on linear measurement basis - Earth work rate for other than loose soil/m PVC/HDPE/GRP + Refilling the trenches with excavated earth (other than sand) in layers and watering, ramming and consolidation as per standard specification etc complete and as directed by Engineer in charge Twad Sor 24-25 Pg No 191100mm Dia DI pipe
8308
10
-
... More
250mm Dia DI pipe
2907
10
-
... More
300mm Dia DI pipe
44
10
-
... More
400mm Dia DI pipe
74
10
-
... More
Supplying and filling in foundation and basement with Crushed Stone Sand (M- Sand) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.
7.05
10
-
... More
Refilling as per IS specifications and as directed by the engineers for the following sizes in metres,as per drawing.Twad Sor 24-25 Pg No 191 100mm Dia DI pipe
8308
10
-
... More
250mm Dia DI pipe
2907
10
-
... More
300mm Dia DI pipe
44
10
-
... More
400mm Dia DI pipe
74
10
-
... More
Refilling the foundation with excavated Soil (other than sand) in layers of not more than 15cm thick, watering, well ramming, consolidating, complying with standard specification and as directed by Engineer .
1828.73
10
-
... More
Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification
504.36
10
-
... More
Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification
718.49
10
-
... More
Supplying and erecting centering to sides and soffits including supports and strutting with necessary cross bracing for plain surface such as RCC slabs rectangular beams all beams lintels etc., centering for soffits upto 3 meter height using mild steel sheet of size 90 cm x 60 cm x 10 mm gauge with MS angles of size 25mm x 25mm x 3mm laid over silver oak (CW) joists of size 10cm x 6cm spaced upto 90cm c/c and casurina props or 10 cm to 13 cm dia spaced at 0.750 cm c/c complying with standard specifications as per TNDSS NO : 30 & 86. Curved surface 0.00m-3.30m
1034.26
10
-
... More
3.31m-4.30m
208.88
10
-
... More
4.31m-5.30m
159
10
-
... More
5.31m-6.30m
114
10
-
... More
Plain surface Below GL upto 3.3m
54.73
10
-
... More
Below GL upto 3.3m above GL
52
10
-
... More
3.3 m to 4.3m ht from GL
103.91
10
-
... More
7.3 m to 8.3m ht from GL
36.33
10
-
... More
11.3 m to 12.3m ht from GL
36.33
10
-
... More
14.3 m to 15.3 m from GL
15.15
10
-
... More
15.3 m to 16.3 m from GL
116.51
10
-
... More
Square Column Column 0 to 3.3m ht above GL and below GL
79.72
10
-
... More
Column above 3.3m to 4.3m ht from GL
10.6
10
-
... More
column above 4.3 m to 5.3m ht from GL
12.6
10
-
... More
column above 5.3 m to 6.3m ht from GL
12.6
10
-
... More
column above 6.3 m to 7.3m ht from GL
12.6
10
-
... More
Column above 7.3m to 8.3m ht from GL
10.2
10
-
... More
column above 8.3 m to 9.3m ht from GL
12.6
10
-
... More
column above 9.3 m to 10.3m ht from GL
12.6
10
-
... More
column above 10.3 m to 11.3m ht from GL
11.94
10
-
... More
column above 11.3 m to 12.3m ht from GL
10.86
10
-
... More
column above 12.3 m to 13.3m ht from GL
12.6
10
-
... More
column above 13.3 m to 14.3m ht from GL
12.6
10
-
... More
column above 14.3 m to 15.3m ht from GL
8.82
10
-
... More
Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards. 0.00m-1.50m From GL
79.47
10
-
... More
First floor
3.44
10
-
... More
1.50m-4.50m From GL
72
10
-
... More
4.50m-7.32m From GL
39
10
-
... More
Providing and laying in position Standardised Concrete Mix M-30 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 400Kg/ cum and maximum water cement ratio of 0.45 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone sand (M- Sand) but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards. Above G.L upto 1.50m
20.7
10
-
... More
Upto 1.5 m below G.L.
5.39
10
-
... More
Below GL & beyond 1.5 m
33.67
10
-
... More
From 4.50 m to 7.32 m ht. From G.L.
3.11
10
-
... More
From 7.32 m to 10.98 m ht. From G.L.
7.77
10
-
... More
From 10.98 m to 14.64 m ht. From G.L.
7.77
10
-
... More
From 14.64 m to 18.30m
36.15
10
-
... More
From 18.3 m to 21.96m
16.49
10
-
... More
Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.
40443.55
10
-
... More
Outside wall in painting watering the surface etc all complete as per standard specification and as directed by the Engineer. Lead Data
266.78
10
-
... More
Painting two coats for Interior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.
30
10
-
... More
Painting two coats of newly plastered wall surface with ready mixed Cement paint of first quality and of approved colour over a priming coat including preparing the surface, clean removal of dirt and including necessary plaster of paris putty wherever required etc., complete complying with standard specification.
506.14
10
-
... More
Painting two coats with Enamel paint of approved colour and quality including cost and conveyance of all materials and labour charges and other incidental charges to site etc., complete. as per standard specification
7.44
10
-
... More
Dewatering using 3HP to 70HP diesel engine pumpset including Hire charges, cost of Diesel, Engine oil, pump operator, labour charges, conveyance of pumpset and fuel to site and back, loading, unloading and any other incidental charges etc., complete.
4500
10
-
... More
Supply and fixing of M.S Grills with with one coat of Red oxide with primer including all costs such as Welding ,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standared specification .TNBP- Spl
4521.6
10
-
... More
Disposal of surplus earth including loading & unloading, conveyance within a distance of 5Km and spreading as directed by the Engineer-In-Charge.Twad Pg No 322
136.92
10
-
... More
Supply an delivery of 600mm dia CI manhole frame to have clear opening of 600mm dia to suit 600mm dia CI Coverf approved quality including cost and conveyance of all materials and labour charges and other incidental charges to site etc., complete. as per standard specification
4
10
-
... More
Supply, delivery and fixing of RCC Inner Ladder of approved quality including cost and conveyance of all materials and labour charges and other incidental charges to site etc., complete. as per standard specification
3
10
-
... More
Supplying and fixing of cutstones size 0.45x0.45x0.15m in CM 1:3 below the inlet pipe
0.06
10
-
... More
Providing RCC spiral staircase as per approved design(Separate Data)
1
10
-
... More
Providing RCC hand rail of 1.2 m height around the top of the roof slab with jolly work (Separate Data) RCC Post
35
10
-
... More
RCC Jolly work
42
10
-
... More
Providing RCC ventilator over roof slab and roof dome of S.R. (0.45 m dia) (Separate Data)
4
10
-
... More
Supplying, Laying, jointing of following Pipe Connection as per IS- 1537/1976 (CLASS- B) VERTICAL CAST FOR PIPES AND IS-1538/1993 FOR SPECIALS etc.,Earthwork Excavation, Refilling, Lowering, Jointing, Lifting charges with necessary Gate Valves and Electromagnetic Flow Meter complete as directed by the Departmental Officers Pipe Details are listed below: Inlet ∅-150mm Outlet ∅-200mm Overflow ∅-200mm Scour ∅-100mm
1
10
-
... More
Construction of Scour valve pit :Earth work, C.C.1:4:8, Brick work in CM 1:5, Plastring in C.M 1:3 with 12 mm Thick, RCC1:1/2:3, Cut stone, Steel and Labour for fixing etc., of size 1.2 m x 1 m x 1.2 m
4
10
-
... More
Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9" X 43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT
10.59
10
-
... More
Plastering in C.M. 1:3 mix (one part of cement and three part of Sand) 10 mm tk including mixing and finishing to a well smoothened surface, watering cost and conveyance all materials and all labour and other incidental charges and other incidental charge
11.81
10
-
... More
Plastering in C.M. 1:5 mix (one part of cement and five part of Sand) 12mm tk including mixing and finishing to a well smoothened surface, watering cost and conveyance all materials and all labour and other incidental charges and other incidental charges
83
10
-
... More
Supply and Delivery Fabrication of MS doors and windows with outer frame and shutter frame in MS angle of size 40mm x 40mm x 6 mm with MS flat 25mm x 25mm x 6mm and MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locking arrangements including two coats of approved enamel paint over coat of red oxide including cost of angles, plates,sheets, fabrication charges, cost of hold fast and transportation charges etc., complete.
1
10
-
... More
Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured cement
13
10
-
... More
Weathering course in Brick jelly and lime concrete using broken brick jelly of size 20 mm uniform gauge in pure slacked lime ( no sand to be used ) the proportion of brick jelly to lime being 32:12.5 by volume laid over the RCC roof slab in a single layer
1
10
-
... More
Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete
11
10
-
... More
Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For Electronic regulator). SD 23
2
10
-
... More
Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting SD 88
2
10
-
... More
Supply and run of 2 of No.8S WG GI wire for guarding with cradle with No.8 SWG GI wire at the equal interval of 1.5 metre SD 75
30
10
-
... More
Supply and fixing of horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure double door (metal) with 40A 4pole MCB isolater as incoming and 2Nos.6A to 32 ASPMC Bas out going inflush with wall and making good of the concealed portion with earth Connection. The MCBD Band MCB's should be with the ISI mark (like standard make)
1
10
-
... More
Supply and run of 4x6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V on 7/20 GI bearer wire for service connection mains
10
10
-
... More
Supply & delivery of following sizes of DUCTILE IRON SOCKET/SPIGOT PIPES FOR CLASS K7 AS PER IS 8329/2000 100mm Dia DI pipe
8308
10
-
... More
250mm Dia DI pipe
2907
10
-
... More
300mm Dia DI pipe
44
10
-
... More
400mm Dia DI pipe
74
10
-
... More
Supply & delivery of following sizes of DUCTILE IRON SOCKET/SPIGOT PIPES FOR CLASS K7 AS PER IS 8329/2000 Twad Sor 24-25 Pg No 40 (i) 100mm D.I. 90 Deg Bend (11Kg/1No) (ii) 100mm D.I. 45 Deg Bend (10Kg/1No) (iii) 100mm D.I. 22.5 Deg Bend (9Kg/1No)
625
10
-
... More
(i) 250mm D.I. 90 Deg Bend (46Kg/1No) (ii) 250mm D.I. 45 Deg Bend (36Kg/1No) (iii) 250mm D.I. 22.5 Deg Bend (31Kg/1No) (iv) 300mm D.I. 90 Deg Bend (65Kg/1No)
1335
10
-
... More
(i) 400mm D.I. 90 Deg Bend (113Kg/1No) (ii) 400 x 400 x 400 A/S DI Tee (iii) 400 x 300 D/S DI Reducer (iv) 400 x 250 D/S DI Reducer
475
10
-
... More
Lowering of D.I Pipes and specials in the trenches and laying to proper grade and alignment and as directed by the TWAD Officers. 100mm Dia DI pipe
8308
10
-
... More
250mm Dia DI pipe
2907
10
-
... More
300mm Dia DI pipe
44
10
-
... More
400mm Dia DI pipe
74
10
-
... More
Jointing C.I/ D.I-S/S pipes and specials with rubber gaskets (tyton joint) including cost of lubricants. (including cost of jointing materials) 100mm Dia DI pipe
1511
10
-
... More
250mm Dia DI pipe
529
10
-
... More
300mm Dia DI pipe
8
10
-
... More
400mm Dia DI pipe
13
10
-
... More
Cutting C.I./D.I Pipes true to axis and filing smoothly and finishing the ends complete 100mm Dia DI pipe
60
10
-
... More
250mm Dia DI pipe
30
10
-
... More
300mm Dia DI pipe
2
10
-
... More
400mm Dia DI pipe
2
10
-
... More
Barricading work (Where, there is less traffic areas and broader roads etc.) for laying of pipe line using casurina poles at 1.50m center to center (8cm to 10cm dia and 1.80m height) vertical with orizontal poles in three rows including painting the vertical poles in the road facing sides with ready mix paint, tying the vertical and horizontal poles with coir rope including fixing charges and fixing 75mm dia reflectors including earth work xcavation for fixing vertical posts and finally removing and stacking the aterials safely for further use etc., complete and as directed by TWAD Board officers.Twad Sor 24-25 Pg No 209
5000
10
-
... More
Barricading work (Where the lines are in narrow width of municipality area, busy streets like Market, Bus stand and in the Highways etc.) for laying of pipe line sing casurina poles at 1.50m center to center (8cm to 10cm dia. and 1.80m height) vertical with horizontal poles in two rows, painting the vertical poles in the road facing sides with ready mix paint, tying the vertical and horizontal poles with coir rope including supplying, delivery and fixing of GI sheet (0.90m x 0.8mm thick) in the horizontal poles and fixing 75mm dia. reflectors including earth work excavation for fixing vertical posts and finally removing and stacking the materials safely for further use etc., complete and as irected by TWAD Board officers. Twad Sor 24-25 Pg No 210
2000
10
-
... More
Testing of pipes for water supply with hydraulic testing equipment by filling with water (including cost of water @ Rs. 60/KL) and testing to recommended pressure in convenient stretches and attending the bursts if any occured during the test, excluding the cost of pipes but including other incidential and operational charges etc., complete for the following diametres of pipes.Twad Sor 24-25 Pg No 174 100mm Dia DI pipe
8308
10
-
... More
250mm Dia DI pipe
2907
10
-
... More
Supply, Delivery and fixing of DI D/F Gate valves (Soft Seated) resilient seated soft sealing gate valves (sluice valves) with body bonnet of ductile cast iron of grade GGG40 or equivalent grade, wedge fully rubber lined with EPDM, replaceable spindle nut, without gland packing and with 3 O-Ring protection on the shaft and seals of NBR and the valves should be of vaccum tight and 100% leak proof with face to face dimentions as CI D/F SLUICE VALVE WITH CAP/ WHEEL AS PER IS 14846/2000 PN 1.0 WITH ISI MARKING All the valves should be with electrostatic powder coating both inside and outside with pocket less straight thro' body passage, inside and outside color Blue including Flange/socket and Flange/spicot tail pieces, etc., loading,unloading, Transportation charges and stacking etc. complete as per specifications. All the valves are to be compatible for burried application with pressure rating . For isolation/Control 100 mm Pipe Valve
13
10
-
... More
250mm Dia DI pipe
3
10
-
... More
300mm Dia DI pipe
1
10
-
... More
Supply and delivery of C.I. DOUBLE AIR VALVE AS PER ISI 14845/2000 AND WITH 5 YEARS WARRANTY specifications and as directed by the engineers.TWAD P.NO-57(2024-2025)
4
10
-
... More
Electromagnetic Flow Meter shall be a velocity sensing Electromagnetic type, microprocessor based signal converter, sealed housing, flanged tube meter for 1.0 Mpa working pressure, manufactured to highest standard available for mag-meters, equipped with minimum six digit digital totalizers, reading in units of (kilolitres/ cubicmeter) and shall be accurate within 0.5% of Measured value, shall operate within a range of 0.3m/sec to 4 m/sec and be constructed as follows:Meter tube (Sensor) shall be fabricated from stainless steel tube and use class PN10 flat face carbon steel flanges in accordance with IS 1538. These flanges shall be welded to the flow tube. The internal and external of the meter tube shall be blasted to near white and lined with hard rubber/ PolyuretSrivilliputhur Municipality hrene/ PTFE preferably by SBR or EPDM. Meter tube shall have a constant nominal inside diameter offering no obstruction to the flow. The accuracy should be inclusive of linearity, hysteresis, repeatability, temperature and pressure effects Coil Housing shall be fabricated from stainless steel (SS 304) with Anticorrosive paint for corrosion resistance and welded to the tube providing a completely sealed environment for all coils, electrode connections and wiring harness capable of submerged or buried operation with IP 68 protection. Signal Converter shall be pulsed DC coil excitation type with auto zeroing. The signal converter shall be remotely mounted away from the meter. The converter shall indicate direction of flow and provide a flow rate indication and a total of flow volume for both forward and reverse directions.The converter shall provide an isolated 4-20 mA output into minimum 500-ohm load and a frequency output of a maximum of 0-10 KHZ and a scaled pulse output, Communication interface is RS485, HART output, . 100mm Dia DI pipe
3
10
-
... More
Labour charges for cutting of B.T road or WBM roads for laying of mains and as directed by Engineer in charge.Twad Sor 24-25 Pg No195 B.T. Roads (or) Maccadam road
718.49
10
-
... More
Construction of Valve Chamber of in Brick work with CM 1:5 mix with RCC Slab 100 mm thick including cost and conveyance of all materials and labour charges to site etc., complete as per Standard specification Sluice Valve Chamber 100mm Dia DI pipe
10
10
-
... More
250mm Dia DI pipe
3
10
-
... More
Construction of Thrust blocks - with RCC M20 Grade concrete Earthwork - excavation and depositing on bank with an initial lead of 10 m and initial lift of 2 m in trenches (Hard stiff clay, stiff black cotton, hard red earth, shales, murram gravel, stoney earth and earth mixed with small boulders and hard gravelly soil) including all charges etc complete., complying with standard specification as directed by Corporation Engineers 'P.C.C 1:2:4 (one cement, two sand and four coarse aggregate) using Sulphate Resistant cement and 20 mm H.B.G stone, RCC M 20 grade using cement 250mm - 90 Deg Bend
15
10
-
... More
250mm - 45 Deg Bend
10
10
-
... More
Supply of 150 mm DE D/F Pipe Inlet to the Existing Over Head Tank 150mm DI D/F 2.50m Pipe
12
10
-
... More
2.00 m Pipe
2
10
-
... More
1.00 m Pipe
6
10
-
... More
(i) 150mm DI D/F Duck foot Bend (ii) 150mm DI F/S Tail Piece (iii) 150mm DI D/F Bend
124
10
-
... More
Supply and fixing of 100m dai GI pipe & Specials of approved quality as IS 1239/PART/1 / PART 2/2004. including cost and conveyance of all materials and labour charges and other incidental charges to site etc., complete. as per standard specification. 100mm Dia GI Pipe
24
10
-
... More
100mm DI Flanged Specials
100
10
-
... More
100mm Dia GI NON RETURN VALVE
1
10
-
... More
Supply and delivery of Open well Submersible pump set conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984 with ISI mark. The pump suitable for installation in sump with 1.1KV grade 3 core suitable copper flat submersible cable to a length of 15m with necessary cable joints. The non-return valve Proposed Pumps in Open well
6
10
-
... More
Proposed Pumps In Sump
2
10
-
... More
Supply and Delivery of Di-Electric Capacitor with Test Certificate given per KVAR is inclusive of Banking charges, such as providing copper bus bars with provision for adding atleast 2 capacitors at later date, cable entry box, fabricating charges etc. complete. This rate is not applicable for replacement of capacitors which does not require banking and fabrication works. 2 KVAR for 7.5HP
20
10
-
... More
Supply and delivery of Star-Delta starter confirming to IS 13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/ Three Phase/50HZ (+/- 5%) and 415V (+/- 10%) including 3 pole magnetic contactor with under voltage release - 3 Nos., CT operated Ammeter (65 mm dia) with suppressed scale, Voltmeter (65mm dia), Voltmeter selector switch, Miniature circuit breaker, Thermal Overload relay, Air Break contactors suitable for next Standard higher KW rating, Single phasing preventor, dry running preventor and On/Off Push button switches, wiring with 1 sq.mm/4 sq. mm copper pvc insulated cable, powder coated vermin proof box, including the capacitor (the cost of capacitor is to be taken separately). 7.5HP-Pump Panel board
4
10
-
... More
Supply and fixing of TNEB meter board suitable for 32A three phase service connection with 3Nos. 32A fuse unit (500V) 32 A neutral link and earth link(1"x1/8" copper flat) on TW plank of size 600 mm x 450 mm x 19 mm with supporting TW reepers of 1" thick a neither side with painting with suitable bolt and nuts for fixing the TW plan kon wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter tof use unit with 1No 40 Amp 30 MA Four Pole RCD / RCCB (Lower End) with suitable necessary connection SD -129
4
10
-
... More
150mm dia Pressure Gauge and Vaccum guage including all accessories as per specification (For Suction and Delivery to be mounted on wall on Teak Wood Board)
4
10
-
... More
Supply ond delivery of 95sq.mm L.T. CABLES 3.5x95Sq.m CORE 1.1 KV GRADE ARMOURED ALUMINIUM CONDUCTOR CROSS LINKED POLY ETHYLENE INSULATED PVC SHEATHED CABLES CONFORMING TO IS 7098 (PART I)/1988 AND AS AMENDED THEREAFTER WITH ISI MARKING
100
10
-
... More
Laying the above cable as per IE Rules inside the Pump Room on in Air (WD - M 2017)
260
10
-
... More
JOINTING OF L.T. CABLES- 3.5 CORE 1.1 KV GRADE ARMOURED ALUMINIUM CONDUCTOR CABLE CONFORMING TO IS 7089 PART I AND AS AMENDED THERE AFTER WITH ISI MARKING including materials lugs clamps
100
10
-
... More
Supply and delivery of heavy duty 11KV grade 3.5x50sq.mm ARMOURED ALUMINIUM CONDUCTOR CROSS LINKED POLY ETHYLENE INSULATED PVC SHEATHED CABLES CONFORMING TO IS 7098 (PART I)/1988 AND AS AMENDED THEREAFTER WITH ISI MARKING
40
10
-
... More
JOINTING OF L.T. CABLES- 3.5 CORE 1.1 KV GRADE ARMOURED ALUMINIUM CONDUCTOR CABLE CONFORMING TO IS 7089 PART I AND AS AMENDED THERE AFTER WITH ISI MARKING
100
10
-
... More
JOINTING OF L.T. CABLES- 3 CORE 1.1 KV GRADE ARMOURED ALUMINIUM CONDUCTOR CABLE CONFORMING TO IS 1554 PART I AND AS AMENDED THERE AFTER WITH ISI MARKING including materials lugs clamps
100
10
-
... More
Supply and deleivery of heavy duty 11KV grade 3x16 Sq.mm ARMOURED ALUMINIUM CONDUCTOR CROSS LINKED POLY ETHYLENE INSULATED PVC SHEATHED CABLES CONFORMING TO IS 7098 (PART I)/1988 AND AS AMENDED THEREAFTER WITH ISI MARKING MV panel to 18KVAR capacitor
100
10
-
... More
JOINTING OF L.T. CABLES- 3 CORE 1.1 KV GRADE ARMOURED ALUMINIUM CONDUCTOR CABLE CONFORMING TO IS 1554 PART I AND AS AMENDED THERE AFTER WITH ISI MARKING
100
10
-
... More
TWIN CI EARTHING as per IS 3043/1987 and Latest amendments including earth pit withRCC slab and other civil works upto 25 HP
4
10
-
... More
Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.
8
10
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements