IREL India Limited Tender

Earthwork excavation for foundation in all types of loose/hard soil and depositing the spoils with an initial lead of 20m and lift upto 2m including refilling etc. by means of manually/ mechanically complete as per specification and as directed by the Engineer-in-charge.

Supplying and spreading of 150mm consolidated thick gravel of approved quality above the refilled earth surface with watering, levelling works, compaction and consolidating, etc. by means of mannually/mechanically complete as per specification and as directed by the Engineer-in-charge.

Supplying, providing and laying soling stone 230mm thick over the existing sub base/sub grade including levelling and consolidation to form a compact surface using hard blue granite soling stone with hand packing, wedging them tightly and filling the voids with loose sand, watering and sweeping the sand into the joints so that the hole is formed as solid mass, etc. complete as per standard specification and as per the direction of Engineer-in-charge.

Supplying, providing and laying PCC 1:4:8 mix for foundation/ flooring work using 40mm and below grade hard blue granite jelly including all form works, mixing, laying, compaction, consolidation and curing, etc. complete as per standard specifications and as directed by the Engineer-in-charge.

Supplying, providing and laying PCC 1:2:4 mix for foundation/ flooring work/kerb wall drainage wall using 20mm and below grade hard blue granite jelly including all form works, mixing, laying consolidation and curing, etc. complete as per standard specifications and as directed by the Engineer-in-charge.

Supplying, providing & laying RR masonry foundation/ wall/ retaining wall in cement mortar 1:6 for construction of wall using hard blue granite stone, etc. complete from 2.5 m below ground level to 4.5m height above ground level with neat finishing including proper pointing & necessary scaffolding work etc complete as per standard specifications and as directed by the Engineer-in-charge.

Supplying, providing and laying dry rubble masonry for soak pit for construction of wall using hard blue granite stone, etc. complete as per standard specifications and as directed by the Engineer-in-charge.

Supplying, providing and laying solid block brick masonry in CM 1:6 using cement concrete solid blocks of minimum size 400*200*150mm for superstructure walls upto 4.5m height from ground level including mixing and conveyance charges and all scaffolding, staging, curing, etc. complete complying with standard specifications and as directed by the Engineer-in-charge.

Supplying, providing and laying brick masonry in CM 1:6 using well burnt country brick of minimum size 22.9x11.2x7cm for foundation/kerb wall/wall upto 4.5m height from ground level including all scaffolding, staging, curing, etc. complete complying with standard specifications and as directed by the Engineer-in-charge.

Supplying, providing and fixing twisted reinforcement IS 1786 HYSD bars Fe500D/Fe550D (TMT bars - TATA/ Agni/ JSW) including fabrication, cutting, bending, cold tying, with overlapping to the standard length wherever necessary and placing the reinforcement in position as per the direction of Engineer-in-charge including binding, provision of spacer bars, cover blocks and all other incidental charges, necessary scaffolding, staging, safety arrangements, etc. complete for all RCC works (item No. 14) upto 4.5m height as per standard specification and as per the direction of Engineer-in-charge.

Supplying, providing and laying cement concrete 1:1.5:3 for RCC works height upto 4.5m using 20mm and below grade hard blue granite jelly with specified reinforcement (rate excluding the cost of reinforcement) and all mixing, laying, compaction, leveling, consolidation and curing, etc., including the cost of centering/ shuttering work, necessary scaffolding, staging, safety arrangements, etc. complete as per the specification and as per the direction of Engineer-in-charge.

Supplying, plastering with CM 1:4 mix 15mm thick one coat floated hard & trowelled smooth etc for floors & walls upto 4.5m height with neat finishing and necessary grouting, scaffolding, staging, safety arrangements, etc. and mix with water proofing compound (Sika/Perma), fibre mesh wherever required, etc. complete complying with standard specifications and as directed by the Engineer-in-charge.

Supplying, plastering with CM 1:3 mix 12mm thick one coat floated hard & trowelled smooth for RCC beam, column, ceiling, wall & floor upto 4.5m height with neat finishing and necessary grouting including all scaffolding, fibremesh wherever required, etc. complete complying with standard specifications and as directed by the Engineer-in-charge.

Supplying, providing and laying with 10mm thick vitrified-Marbonite double charge/matte finish tiles of size 1200mmx 600mm Kajaria/ Somania /Qutone brand with Cement Mortar 1:2 and pointing, (apply spacer joint, epoxy joint-wherever required) including finishing the joint and pointing flush with the surface, etc. complete as per specification and as directed by Engineer-in-charge.

Supplying, providing, laying, dadoing the floors with 10-15mm thick teracotta pattern floor tiles (matte finish) (Somania/ Kajaria/ Qutone) makeof size 300mm x 300mm of approved quality and shade fixing with CM 1:2 – 10mm thick, etc. including neat cleaning, grouting and edge finishing with shaded colour joint filler complete etc. complete as per the direction of the Engineer-in-charge.

Supplying, providing and laying 110mm dia ID PVC finolex/ Ashirwad/ Astral (6Kg) pipes including all specials such as bend, elbow, reducer, tee, solvent cement, etc. complete as per specification and as directed by the Engineer-in-charge.

Supplying, providing and fixing 50/60mm thick coloured (red/ yellow/ black/Grey) square/Zig-zag/ Hexagon/ Rectangle shape concrete paver block of size 200x100mm/ 150x300mm/ 250x100mm/ 200x120mm/ 220x270mm/ 200x200mm pattern floor, bottom laying with 6mm jelly with 50mm thick over the earth surface including levelling the earth surface with neat finishing, side packing etc. complete as per the specification and as per the direction of the Engineer-in-charge.

Supply of paints and painting one coat with emulsion paint (Asian/ Berger/Nippon) 1st quality of approved shade over a coat of cement primer for the external/internal masonry surface upto 10m height and above from ground level, including thorough scrapping, cleaning, removal of dirt, all tools & tackles, sandpaper and scaffolding arrangements, etc. and applying putty touch-up works wherever required, etc complete as per specification and as per the direction of Engineer-in-charge.

Supplying & fixing UPVC (Un-Plasticized Polyvinyl Chloride) Door (white/colour). Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (UPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug with door closer, etc. complete as per specification and as directed by the Engineer-in-charge.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows/ Ventilator (white/colour) of casement type (open)/sliding from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames, with door closer, etc. complete as per specification and as directed by the Engineer-in-charge.

Supply of paints and painting two coat with 1st quality enamel/ touch wood paint of approved shade (Berger/ Asian/ Nippon) matching to the existing for all doors, windows, false ceiling, etc. with thorough cleaning and removal of dirt and applying wood sealer/primer and putty wherever required including necessary scaffolding arrangements, etc. complete as per specification and as directed by the Engineer-in-charge.

Engagement of Fitter for miscellaneous works complete as directed by the Engineer-in-charge (Required materials will be issued by company on free of cost).

Engagement of Mason for miscellaneous works complete as directed by the Engineer-in-charge (Required materials will be issued by company on free of cost).

Engagement of labour (Mazdoor) for miscellaneous work complete as directed by the Engineer-in-charge. (Required materials will be issued by company on free of cost).