Indira Gandhi Centre For Atomic Research Tender

Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.

Indira Gandhi Centre For Atomic Research - IGCAR Tender

Works
Building Construction
Eprocure
Opening Date28 Nov 2024
Closing Date23 Dec 2024
Tender Amount₹ 28,72,69,000 
Notes
Download

Costs

Description

Unlock the Tender details for free
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Unlock the Tender details for free
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

View all details for FREE
... More
All kinds of soil with depth exceeding 3m but not exceeding 4.5m below average Ground level and disposing surplus excavated earth upto a lead of 200 metres.

2500

-

-

... More
Earthwork excavation by mechanical means (Hydraulic excavator) / manual means for foundation, substructures, plinth beam, cess pits & trenches all kinds of foundation etc., in soft rock for the following depth from average ground level upto the required line, level and grades in both dry and wet conditions including shoring, strutting, bailing out of water if necessary, levelling and ramming the bottom of trenches, dressing of sides, stacking the excavated materials away from the edge of trenches, refilling the sides of foundation as required with selected excavated earth and depositing / disposing the surplus earth (Disposed soil to be leveled by breaking clods, if any and neatly dressed and leveled) with an lead specified below and stacking the soft rock boulders in a neatly leveled ground for measurement to departmental gauge all complete as per specifications and as directed by the Engineer-in-charge.

-

-

-

... More
All kinds of soft rock with depth exceeding 3m but not exceeding 4.5m below average Ground level and disposing surplus excavated earth upto a lead of 200 metres.

800

-

-

... More
Providing a system for dewatering and drainage of water from site to main drain so as to retain the excavated formation dry for the duration required by the client/consultant including all equipments, consumables, site protection, etc. complete, all as per specification and as directed by Engineer-in-Charge.

25000

-

-

... More
Providing and laying plain cement concrete M20 grade with total minimum cementitious content (cement + fly ash content not exceed 20 % by weight of total cementitious content) 350kg/cum of concrete using 20mm maximum size graded aggregates including mechanical mixing, transporting and placing in required position, ramming, compaction, levelling, curing, shuttering, dewatering if any, complete all as per specification for levelling courses in foundation for walls, footings, floor drains etc., encasing pipes and other required works directed by Engineer-in-Charge complete all as per specifications.

500

-

-

... More
Supplying and placing in situ Controlled Reinforced cement concrete of grade & total minimum cementitious content as specified (cement + fly ash) for kg/Cu. M. using OPC conforming to IS 269-2015 or latest edition and with required fly ash conforming to IS 3812 Part -I / ASTM C-618 Class F. Fly ash should be blended at site such that fly ash content should not exceed 20% by weight of total cementitious content. Coarse aggregate used should be hard granite machine crushed (with VSI technology only) graded stone aggregates with maximum size of aggregate not exceeding 20mm size. Fine aggregate used shall be either natural river sand or crushed stone sand (with VSI technology only and should be washed in water to remove finer particles, the micro fines particles of size less than 75 micron shall be less than 7%) (Zone I /II) conforming to IS 383 – 2016. The cost includes weigh batching, required chemical admixtures, mechanical mixing/Ready mix supply plant mixing, transporting/transporting by Transit Mixers, pumping using Concrete pumps/ placing with crane buckets etc., at all levels, lifts, vibrating, consolidating, curing and finishing smooth of all exposed faces complete for column footings, columns, lintels, sunshades, gutter slabs, beams, slabs, water tank, machine foundation and all other & all structural elements, dewatering wherever necessary, compacting, finishing, curing (For a period of at least 10 days), providing construction / contraction / expansion joints, pour strips etc. but excluding centering, shuttering and reinforcement (Formwork and reinforcement will be paid for separately) all as per specification, drawings and as directed by the Engineer-in-charge. Note:- 1. The rate of concrete shall include all labour, materials, tools /tackles, plant and equipment, supervision, charges for mixing & cost of admixture etc. complete. Chemical admixture conforming to IS 9103 shall be mixed in fresh concrete and prior permission from Engineer-in-charge shall be obtained for dosage and compatibility. 2. Test certificate of cement, procured from dealer/company to be submitted for all cement related works by the Contractor. 3. The rate shall be quoted on the basis of using minimum cement per cu.m. of concrete mentioned below for relevant grade of concrete. Any upward/downward variation required to obtain the specified strength will be paid for or deducted at the rate of cement specified in Schedule F. 4. Cement based grouting in case of any porus / honey comb structure, visible cracks on surface, etc or any other defects if noticed shall be rectified as directed by EIC. The cost of cement grouting in such cases shall be borne by the contractor only.

-

-

-

... More
M35 grade with total minimum cementitious content (cement + fly ash content not exceed 20 % by weight of total cementitious content) 400kg/cum of concrete - up to FFL

3000

-

-

... More
M35 grade with total minimum cementitious content (cement + fly ash content not exceed 20 % by weight of total cementitious content) 400kg/cum of concrete - above FFL (Ground floor, first floor, second floor)

3300

-

-

... More
Providing on the floor area by screeding with screed concrete of M20 grade with total minimum cementitious content (cement + fly ash content not exceed 20 % by weight of total cementitious content) 320kg/cum of concrete and minimum cement content of 256 Kg/cum of concrete (shall be using 10mm down aggregate) admixed with crystalline based integral water proofing admixture CERA CRYSTALLINE INTEGRAL / Conplast / SIKA WT-215P or equivalent at the ratio specified by manufacturer recommendation to the required thickness of depending on the downtake pipes available including applying one coat bonding polymer modified mortar 1 : 2 (1 cement : 2 sand) admixed with CERA LATEX SBR / FOSROC NITO BOND SBR / SIKA additive or Equivalent at 3kg per bag of cement by manually with compressed air under pressure over the prepared surface at all locations and all the elevation as specification and as directed by Engineer-in-Charge. Note: 1) The area shall be tested for any leakages by ponding of water (water holding test) before and after application of treatment in panels. (panels shall be made by least ratio of cement mortar and the same shall be thoroughly cleaned before receiving further treatment). 2)This item shall includes placing the pumpable concrete by boom placer, concrete pump, supply of RMC concrete in Tranist mixer as directed by Engineer-in-Charge if bulk quantity is required according site condition.

250

-

-

... More
Manufacturing, supplying, hoisting and fixing in position at all lifts, precast units of various patterns and sizes for precast plain solid units, slabs, exhaust fan moulds etc., in reinforced cement concrete of 1:2:4, using 20mm and below machine crushed graded stone aggregate and crushed stone sand including weigh batching, mechanical mixing, casting, vibrating, finishing of exposed faces, curing, necessary formwork & moulds, transporting and placing at all lifts, preparation of connections, grouting with cement mortar/cement grout wherever needed excluding steel reinforcement complete all as per drawing, specification and as directed by the Engineer-in-charge.

25

-

-

... More
Providing, straightening, decoiling wherever necessary bending, cutting, binding and fixing in position corrosion resistant steel reinforcement (CRS) bars of Fe500D grade steel conforming to IS:1786 'JSW or SAIL or approved equivalent make' and tying with approved annealed binding wire of 1.6mm dia in all reinforced cement concrete work at all lifts, including cost of supplying and fixing the spacer/cover blocks in cement mortar 1:2 and binding wire complete all as per specification and as directed by Engineer-in-Charge for the following level as mentioned below. Note: The rate shall be including the cost of reinforcement steel. The reinforcement steel will be procured from dealers with a test certificate as approved by the department. For further details please see point 7 of Section VIII, General Information for Guidance of Tenderers.

-

-

-

... More
up to FFL

500

-

-

... More
above FFL (Ground floor, first floor, second floor)

725

-

-

... More
Supplying, fabricating, erecting and fixing in position at all levels, centering and shuttering to correct line and levels including strutting, propping, etc., with necessary bracings in all axes to give a stable assembly with provision for making the joints in the shuttering fully leak proof and with provision for fixing coil nuts with tie rods along with suitable channel for lateral supports and for inserts, projecting dowels, anchor bolts or any other fixture, including staging, access and working platforms etc., all complete as specified and directed including dismantling and removing the aforesaid assembly after the concrete attains the sufficient strength to self-support itself without cracking and distortion all as per specification, including all materials and labour complete in all respects at all lifts as mentioned below. The measurement for the formwork will be the actual area of forms in contact with concrete surfaces. Shuttering with plywood panels alone will be permitted.

-

-

-

... More
up to FFL

4800

-

-

... More
above FFL (Ground floor, first floor, second floor)

17000

-

-

... More
Providing, supplying, cutting, bending to shape, welding, fabricating, hoisting, placing and fixing in position structural steel members, MS structural embedment’s/penetration etc. using MS angles, channels, I-sections, plates, tees, flats, rounds, square, sections etc. including chamfering and rounding off the edges, applying paint as described below of approved colour and make, scaffolding and staging required for fabrication as well as erection complete all as per technical specifications, drawings and as directed by the Engineer-in-charge. (This item includes all structural works for steel structure, steel frame work, Ep's etc.,) Note: (i) Lifting device arrangements if any required also to be arranged by the contractor at his own cost. (ii) Painting Two coats of polyuerthane paint on steel surface and other required internal surface at all levels with Apcothane CF 675 PU 240 paint of Asian or approved brand, colour and manufacturer to give and even shade including one under coat of suitable Epoxy/PU primer.

15

-

-

... More
Providing, supplying, cutting, bending to shape, welding, fabricating, hoisting, placing and fixing in position structural steel members like trusses, purlins etc. using MS hollow / circular / square / rectangular tubular sections including chamfering and rounding off the edges, applying paint as described below of approved colour and make, scaffolding and staging required for fabrication as well as erection complete all as per specifications, drawings and as directed by the Engineer-in-charge. Note: (i) Lifting device arrangements if any required also arranged by the contractor at his own cost. (ii) Painting Two coats of polyuerthane paint on steel surface and other required internal surface at all levels with Apcothane CF 675 PU 240 paint of Asian or approved brand, colour and manufacturer to give and even shade including one under coat of suitable Epoxy/PU primer.

2

-

-

... More
Providing Structural steel work in M.S Plain Plates and chequrred Plates in Embedded Parts, Trench Covers, Connection plates etc. including cutting, hoisting, fixing in position and applying paint as described below of approved colour and make, including cost of structural steel Plates, welding, all labour charges etc. complete as per drawings and specifications. Structural steel plates to be used shall be of approved make. Note: (i) Lifting device arrangements if any required also to be arranged by the contractor at his own cost. (ii) Painting: Painting Two coats of polyuerthane paint on steel surface and other required internal surface at all levels with Apcothane CF 675 PU 240 paint of Asian or approved brand, colour and manufacturer to give and even shade including one under coat of suitable Epoxy/PU primer.

3

-

-

... More
Supplying, fabricating, installing, placing and securing in position mild steel grills for windows comprising of square bars / MS flats as per detailed drawing including cutting, bending to shape, welding, painting as specified in note with approved colour complete all as per specification and drawings. Note: (i) Lifting device arrangements if any required also to be arranged by the contractor at his own cost. (ii) Painting Two coats of polyuerthane paint on widow grills / steel surface and other required internal surface at all levels with Apcothane CF 675 PU 240 paint of Asian or approved brand, colour and manufacturer to give and even shade including one under coat of suitable Epoxy/PU primer.

2400

-

-

... More
Providing, fabricating and fixing hand rail using 304 grade Stainless Steel pipes, Square sections etc. of approved size and make and quality by cutting to required size, welding, mirror / matt polishing , fixing at site etc. for balcony railing & staircases railing including special sections as per drawings, specifications complete. A sample to be fabricated and to be got approved by the Engineer-in-Charge before starting of work at site. This work to be executed through approved specialized agency.

2100

-

-

... More
Providing and fixing mechanical bolts anchored in to RCC beams, columns and slab to a required depth of 150mm to 250mm by using "Hilti or approved equivalent make "ANCHOR ROD HIT - RE 500 M12" anchor fasteners bolts and grouting with injection mortar system of adhesive HILTI or approved equivalent make "Hilti HIT - HY 200-R" at all elevation including drilling, fixing in position inclusive of all machinery and man power, scaffolding and as per specification and as directed by Engineer-in-Charge.

100

-

-

... More
Conveying the surplus excavated earth, broken materials, debris, boulders and spoil by mechanical means and depositing at places inside DAE installation identified as Dumping yard as per requirement with a lead specified below including loading, unloading, breaking clods, levelling all complete as per specification and as directed by the Engineer-in-Charge. Note: 1) The rates in respect of this Item are applicable for the NET Quantities arrived at after making deductions for voids @ 20% in respect of soil, @ 30% in respect of debris and @ 50% in respect of Rock from the corresponding Stack / Truck measurements. 2) The earth shall be dumped well inside the Dumping yard and not over approach pathway road.

-

-

-

... More
Lead charges for lead Exceeding 4 kilometre but not exceeding 5 kilometre

6500

-

-

... More
Supplying and injecting with approved quality chemical emulsion at the rate 1:29 ratio (1 part of chemical and 29 parts of water) and concentrations as per IS 6313-2001 Part II for preconstructional anti termite treatment and creating a chemical barrier under and alround the masonry pits, masonry foundations, wall trenches, plinth filling, junctions of wall and floor, expansion joints, surfaces of RCC works for a depth of min. 500mm from the finished ground level, surrounding of pipes, conduits etc., walls retaining soil above floor level, apron and drain along the perimeter of the building including all complete as per specification / IS 6313:2001 and direction of Engineer-in-charge. Only ground floor plinth area of the building will be measured for the payment in the following three stages. i) 20% after completion of the foundations ii) 50% after completion of the ground floor flooring iii) 30% after completion of all treatment works including ground floor doors & windows. Work to be executed by M/s Pest Control (India) or any other approved agency and specified guarantee for 6 years shall be furnished by the tenderer. Payment will be cleared only after submission of Guarantee.

2500

-

-

... More
Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete in all respects as per clause 401 of MoRT&H specifications for road and bridge works (4th revision or latest) and as directed by the Engineer-in-Charge for following.

-

-

-

... More
for Grading-II material

700

-

-

... More
Supplying and filling the selected earth from outside of DAE installation (with all lead and lift), including excavation from borrow pits if any required, filling in layer of not more than 150mm thick, each layer well rammed and consolidated by mechanical roller including water consolidation etc., levelling, dressing the top surface to the required level, complying with standard specification and as directed by the Engineer-in-charge. Note: Proper Trip sheet records shall be maintained for bringing the earth through DAE main gate with security stamp duly signed by Departmental Engineer.

2300

-

-

... More
Providing and constructing with approved well cured flyash brick work in cement mortar 1:5, flyash bricks are made as per IS 12894 of latest edition (flyash + crushed sand stone + Lime + additive/cement with water proofing chemicals and Accelerators) (non modular) of class designation 5.0 in superstructure at all levels and lifts including scaffolding, raking out joints, continuous water curing for a minimum period of 14 days from the date of construction, complete as per specifications, drawings and as directed by the Engineer-in-Charge at levels ,lifts and floors mentioned below.

-

-

-

... More
for Basement and Ground Floor

150

-

-

... More
First floor

220

-

-

... More
Second floor

280

-

-

... More
Above Second floor

15

-

-

... More
Providing and constructing at all floors and lifts 115mm thick brick work in cement mortar 1:4 including providing and placing in position 2 nos of 8mm dia rods at every 4th layer using approved well cured flyash brick work as per IS 12894 of latest edition (flyash + crushed sand stone + Lime + additive/cement with water proofing chemicals and Accelerators) (non modular) of class designation 5.0 including scaffolding, raking out joints, continuous water curing for a minimum period of 14 days from the date of construction, complete as per specifications, drawings and as directed by the Engineer-in-Charge at all levels and lifts & all floors , scaffolding, curing, racking out the joint on both faces etc. complete all as per specification and as directed by the Engineer-in-Charge. (Note: The rate shall be including the cost of reinforcement steel.)

-

-

-

... More
for Basement and Ground Floor

45

-

-

... More
First floor

30

-

-

... More
Second floor

45

-

-

... More
Providing plastering to the internal surfaces of brickwork/concrete at all elevations in cement mortar 1:5, 12mm thick including hacking of concrete surfaces with pointed tool, scaffolding, finishing, curing, forming grooves wherever necessary, all as per specifications at all levels

5230

-

-

... More
Providing plastering in cement mortar 1:4, 20mm thick in two coats at all elevations with 2% of water proofing compound (12mm undercoat followed by 8mm over coat) or as per manufacturers specification, ‘Impermo’ or approved equivalent make including hacking of concrete surfaces with pointed tool, scaffolding, finishing, curing, all as per specifications at all levels.

4450

-

-

... More
Providing and constructing Random Rubble masonry in cement mortar 1:6 using crushed stone sand and using hard granite stones obtained from approved quarry with bond stones at 2.00 metres apart for foundation, basement and in superstructure, compound/boundary walls, including sizing of stones if required, raking out joints, scaffolding, curing etc., complete all as per drawing, specifications and as directed by Engineer-in-charge at all lifts.

180

-

-

... More
Providing Flush pointing with cement mortar 1:3 using crushed stone sand at all levels over the random rubble masonry wall including scaffolding, curing, forming grooves wherever necessary all as per specifications, drawings and as directed by the Engineer-in-charge.

625

-

-

... More
Providing F3 finish over concrete surfaces in cement mortar 1:1.5 using crushed stone sand (1 part cement : 1.5 part fine sand) including wetting the surface, labours, curing, all materials, scaffolding, at all elevations complete all as per specification and as directed by the Engineer-in-Charge.

4800

-

-

... More
Protective Coating over the external surface of RCC structures below ground level : Providing and applying coal tar epoxy based protective coating 'Fosroc Nitocote ET402 or Master Protect 1812 of BASF or approved equivalent applied in two coats for a total DFT of 300 microns with suitable brush or a roller brush (The Dry Film Thickness will be measured for a minimum thickness of 300 micron for payments). The mixed material shall have a density of 1.65Kg/Lit, adhesive bond strength of 1.50 Mpa as per ASTM D4541, abrasion resistance of 17mg/1000 cycles when tested as per ASTM D4060, CS 17 wheel and slant shear bond strength of 10 Mpa as per ASTM C882. The substrate shall be prepared by mechanically grinding using electrically operated hand held sander machines to expose all blow holes, voids and imperfections and these shall be cleaned by flushing with air and water if required to clean any oily substance and filled with suitable epoxy putty before the application of the protective coating, all complete as per the instruction of manufacturer and the Engineer-in-Charge..

5600

-

-

... More
Providing & applying of epoxy linings on the surface of the concrete. The epoxy shall be food grade (Fosroc Nitocote EP405 or approved equivalent) and shall comply with the requirements of IS:9833 - 1981 with minimum two coats wherein each coat shall be 200 microns including all complete as per specification and as directed by the Engineer-in-Charge.

2700

-

-

... More
Supplying, providing, fixing, approved Extruded polystyrene sheet filler board with bulk density of 20Kg/Cum and recovery minimum 80% as a back stop material with adhesive to concrete and masonry surface for expansion / separation joints at column, grade slab, wall vertical surface, staircase of the following thickness at all elevations as per drawings and specifications. Cost to include preparation of surface, supply of necessary tools, wrapping with 500 micron thick polyethylene sheet, scaffolding, manpower etc., all complete, as per drawings, specifications and as directed by the Engineer-in-Charge.

-

-

-

... More
75mm Thick

190

-

-

... More
150mm Thick

10

-

-

... More
Supplying and providing the CERA MEC STRIP SEAL (or approved equivalent) upto 250mm width Expansion joint strip treatment for Roof slab/vertical wall area including chipping & surface preparation, applying CERA MEC SS ADHESIVE (or approved equivalent) over the roof slab expansion joint to a minimum width of 50mm and aligning to the required line, overlapping of minimum 100mm of strip with suitable rubber adhesive, carefully removing of air pockets & wrinkles as specification including providing with approved quality of polyethylene or high quality foam backer rods, including treatment with admixed with 'CERA LATES SBR or Fosroc Nitobond SBR or approved equvalent' @ 1kg per 50kg (1 bag) of cement at all joints, including all as specification and as directed by Engineer-in-Charge. Note: The area shall be tested for any leakages by ponding water in panels. Incase of any leaks found grouting shall be done with contractor cost.

215

-

-

... More
Providing and fixing of aluminium colour anodized sheets of required width & thickness for vertical / horizontal portion of expansion joints. The rate inclusive of necessary high quality screws, slots, fixing charges, scaffolding complete all as per specification and as directed by the Engineer-in-charge. Note: 1.Payment shall be made on the basis of weight of Aluminium members /sections fabricated and actually installed in position without extra allowance for wastage. No extra payment shall be made for all non-Aluminium consumable items like screws, gasket, weath. 2. All fittings shall be of matching colour Anodizing Aluminium sections and cost shall be included in the quoted rate. 3. The Aluminium sections shall be smooth, rust free, straight, mitered and joined mechanically wherever required cleat angles at no extra cost. 4.All required measures to be taken to prevent Bimetallic corrosion wherever different metals coming in contact.

450

-

-

... More
Providing Water proofing treatment to the Terrace and gutter over RCC cast insitu slab roof area using 4mm thick plain 4 layered and WP SHIELD SLATED 4mm thick, 5 layered of CERA / FOSROC / SIKA or approved equivalent as per specifications and as directed by the Engineer-in-Charge. a)The following treatment shall be given if any cracks found and " V" grooves shall be cut along the surface crack and construction joint of slab the same shall be filled with cementitious non shrink grout CERA GROUT 40 of CERA or SIKA or FOSROC or equivalent after applying a lavish coat of polymer based bonding agent SBR LATEX SBR of CERA/SIKA/FOSROC or equivalent. b) The area shall be tested for any leakages by ponding water in panels with the duration of minimum 7 days after grouting. c) When the entire surface is water-tight, dry and moisture free, one coat of bituminous primer shall be applied over surface @ 0.3 kg/sqm and 1 st layer of 4 - layered, 4mm thick, polymer reinforced APP membrane from CERA / SIKA / FOSROC Torchseal 4PI or equivalent shall be laid with 200mm overlapping by torch - on application when the primed surface is tacky and as per the manufacturer's recommendation. d) The second layer of 5 - layered, 4mm thick, polymer reinforced APP membrane - SLATED from CERA /SIKA / FOSROC Torchseal 4PI or equivalent shall be laid with 150mm overlapping by torch - on application when the primed surface is tacky and as per the manufacturer's recommendation. Note: i) The treatment should be done by an agency specialized in the job having sufficient knowledge of water proofing treatment. Suggested vendors: (1) M/s. Cera-Chem Pvt. Ltd., Chemicals (2 )M/s. FOSROC (3) M/s. Sika India Pvt. Ltd. Chemicals or approved equivalent . ii) Ten years guarantee shall be given by the contractor in the prescribed form of the department for the above water proofing treatment work from the date of completion.

140

-

-

... More
Providing and constructing haunching of size 100mm X 100mm using CC 1:3:1 using 6mm down graded chips admixed with 'SBR LATEX SBR of CERA/SIKA/FOSROC or approved equivalent' 1kg per 50kg (1 bag) of cement as specification and as directed by Engineer-in-Charge.

380

-

-

... More
Providing and laying water proofing treatment as specified below to vertical & horizontal surfaces to the required height and bottom of WCs, bathroom, planters, water tanks, raft, lift wall or any other locations as directed, with proper gradient, protective topping suitably finished or keeping rough to receive tiles, surface preparation, injection grouting wherever required using shrinkage compensating plasticizing admixture, pond curing, water tightness testing, etc. complete all as detailed hereinafter including testing for leak-proof ness complete. Note: 1) water proofing treatment should be done by an agency specialized in the job having sufficient knowledge of water proofing treatment. Suggested vendors : (a) M/s. Cera-Chem Pvt. Ltd., Chemicals (b) M/s. Fosroc chemicals (b) M/s. Sika India Pvt. Ltd. Chemicals. Layers of water proofing treatment to be done as follows: a) 1st Bonding coat: Providing and applying tow coats of bonding slurry agent of CERA LATEX SBR / Fosroc Nitobond SBR / Pidilite (RBR - SBR) or equivalent to the cleaned and prepared concrete surface proposition as per manufacturer recommendation. b) Base coat of Polymer modified mortar : Applying polymer modified mortar 1:2:2 (1 cement : 2 sand: 2 stone Aggregate of nominal size 6mm) admixed with CERA LATEX SBR / Fosroc Nitobond SBR / Pidilite (RBR - SBR) or approved equivalent @ 3 kg per bag of cement for a thickness of 6mm over the prepared surface. C) Fixing of glass fiber mesh of Gyproc or equivalent Alkali resistance Glass fibre mesh (4-5mm square aperture with 145 gsm) fixed in the plastering area as instructed by Engineer-in-charge and fixed as per manufacturer recommendation. d) Second coat of Bonding cum water proofing coat: : Providing and applying tow coats of bonding slurry agent of CERA LATEX SBR / Pidilite (RBR - SBR) or equivalent to the cleaned and prepared concrete surface proposition as per manufacturer recommendation. e) Top coat of Polymer modified mortar : Applying polymer modified mortar 1:2:2 (1 cement : 2 sand: 2 stone Aggregate of nominal size 6mm) admixed with CERA LATEX SBR / Pidilite (RBR - SBR) / FOSROC NITO BOND SBR or equivalent @ 3 kg per bag of cement for a thickness of 20mm over the prepared surface. The rate includes cleaning the slab surface of all mortar fallings, opening, filling / grouting cracks, injection grouting to RCC surfaces, necessary curing and drying period for each coat as recommend by the manufacturer, providing proper bonding keys in each layer and 75mm vata with above all specified coats on all sides.

100

-

-

... More
Providing and laying 2mm thick self leveling epoxy flooring from Asian / FOSRAC or other approved brand consisting of priming coat using primer, screed and top coat - including preparation of the surface by scrapping, applying sand paper, filling the holes, joints, cracks if any, etc., including demarcation outer border line of specified width and specified colour as directed by the Engineer-in-Charge, the rate includes the preparation of flooring, primer and top coat etc., complete all as directed by the Engineer-in-Charge. Priming: All surfaces to be primed with 'Apcoflor HFP 120 of Asian / Fosroc Nitoprime 25 or other approved equivalent' brand of concern agency designed for maximum absorption and adhesion to concrete substrates. The primer should be applied immediately to the prepared surface using stiff brushes and/or rollers. The primer should be well 'scrubbed' into the substrate to ensure full coverage, but care should be taken to avoid over application or 'ponding'. Topcoat : Top coat shall be of APCOFLOR HFP 120 of Asian/ Fosroc Nitoflor SL 2000 or other approved equivalent' brand of concern agency of 2 components system having coating thickness of 2mm top coat. The top coat should be applied on the top of primer on the prepared surface using stiff brushes and/or rollers and ensure full coverage and but care should be taken to avoid over application or ponding.

4000

-

-

... More
Providing and Painting with Epoxy paint (two or more coats) using APCODUR-CF-641 finishing coat at all locations prepared and applied as per manufacturer' specifications including a priming coat if specified by the manufacturer, preparation of surface and etching with 10% commercial Hydrochloric acid wherever necessary and neutralizing the acid etched areas by washing with 5% solution of soda ash neatly and washing with sufficient water, after first coat Epoxy based trowelling compound if required, including preparation of the surface by scrapping, applying sand paper, filling the holes, joints, cracks if any, etc. complete all as per manufacturers Technical Data and as directed at site to achieve 150micron Dry film thickness (50 Micron Primer coat and 100micron finishing Coat). (Contractor has to provide Elcometer sampling sheets etc. at his cost for testing film thickness)

10000

-

-

... More
Providing and applying painting Two coats at all levels with premium Plastic emulsion paint (Asian or Equivalent approved brand, colour and manufacturer) to give an even shade including one under coat of cement primer, applying putty, preparation of the surfaces, scaffolding complete all as per specifications and as directed by the Engineer-in-Charge.

900

-

-

... More
Providing and applying painting Two coats at all levels with Acrylic emulsion paint (Asian or ACE or Equivalent approved brand, colour and manufacturer) to give an even shade including one under coat of suitable primer, applying putty, preparation of the surfaces, scaffolding complete all as per specifications and as directed by the Engineer-in-Charge.

500

-

-

... More
Providing and applying a protective painting with desired pigment colour of Anti-Carbonation coating to the external wall surfaces (Rough cast / Plain surfaces) at all locations and at all elevations including preparing the surface, removing existing emulsion or any coat, providing and applying a single component acrylic polymer based protective coating CERA INFRAGUARD – WA / FOSROC DEKGUARD / SIKAGARD 550W Elastocolor or equivalent of a minimum of 2 coats over a primer coat with CERA INFRAGUARD – WA PRIMER / FOSROC DEKGUARD / SIKAGARD 552W Primer or equivalent and cost of all materials, labour, tools, tackles, equipment’s, fuel & transport etc. complete all as directed by Engineer-in-charge and as per the specifications. The total dry film thickness of both coats excluding primary coat should be minimum of 200 microns.

4000

-

-

... More
Providing and fixing approved design of Doka Staircase Tower system up to 30M height using with 1.20m height load bearing tower frame, preassembled stairway elements, intermediate exits permit safe access to all work - deck levels. The stair tower is anchored to the structure as required by the usage situation and complies with the relevant safety rules (Class B to EN 12811-1). The system consists screw jack foots, basic frames, inner, outer, access, landing, railing systems, staircase systems, access supports, scaffolding tubes, scaffolding planks, hand rail posts, scaffolding tube holders, couplers of different types etc. made with M.S. Tubes and M.S. Plates and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The Doka Staircase Tower system shall be stiffened with bracings, runners, connection with building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and as approved by the Engineer -in-charge. The elevation area of the doka staircase system shall be measured for payment purposes at wide of every 1.20m and plan area of intermediate exits permit safe access to all work - deck levels also shall be measured for payment purposes. The payment shall be made once irrespective of duration of doka staircase system.

200

-

-

... More
Providing and fixing in position Aluminium (Anodised transparent or dyed to required shade) Doors, Windows, Ventilators, Louvers, fixed glazing, Sliding windows, north light glazing, expansion joint coverings etc. heavy duty standard colour Coated anodized Aluminium extruded sections, colour Aluminium sheets as per relevant IS Codes of make including cost of providing locking arrangement for sliding windows, pivots, approved door and window handles, EDPM Gasket, Neoprene Gasket lining, stainless steel screws, mastic filling, weather strips, washers, rollers etc. as required and as per drawing etc. all complete at all heights and as directed by the Engineer-in-Charge. Note: 1.Payment shall be made on the basis of weight of Aluminium members /sections fabricated and actually installed in position without extra allowance for wastage. No extra payment shall be made for all non-Aluminium consumable items like screws, gasket, weath. 2. Glazing, particle boards, Aluminium grills, mesh etc., will be paid separately under relevant item. 3. All fittings shall be of matching colour Anodizing Aluminium sections and cost shall be included in the quoted rate. 4. The Aluminium sections shall be smooth, rust free, straight, mitered and joined mechanically wherever required cleat angles at no extra cost. 5.25mm thick marine Plywood to fixed to ventilator wherever exhaust fans needs to be fixed. 5.All required measures to be taken to prevent Bimetallic corrosion wherever different metals coming in contact. 6. The Aluminium section shall be Anodized of 20 Microns for Window/Fixed Glazing of approved drawing Size & finishing and of approved shade/colour with the approval of Architect/Engineer-in-charge.

120

-

-

... More
Providing and fixing factory made uPVC sliding/casement windows of "QUTE"/"NCL WINTECH"/"Fenesta"/SINTEX or approved equivalent make having an overall dimension as below manufactured from unplasticised polyvinyl chloride (uPVC) hollow multi chambered extruded section with wall thickness 2.0mm±0.2mm with isolated drainage and reinforced with Specially designed galvanized steel reinforcement for optimum structural strength with minimum wall thickness of 1.0mm ± 0.1mm, the corners and joints shall be mitred cut and fusion welded including the cost of fibre glass fly mesh of make Saint Gobain or equivalent, single glazing with 5mm thick tinted toughened colour glass of make Saint Gobain or equivalent, EPDM weather and glazing seals, all hardware’s viz., PU coated rollers for smooth movement of slider shutter, single/ multi point lock system or handle locks which cannot be released from outside, pile seal to avoid dust, etc., fixing the windows using with corrosion resistant fasteners at all levels, etc., all complete as per manufacturers specification, drawing and as directed by Engineer-in-charge. Note: 1) The rate quoted shall be inclusive of fixing of frames with fisher screw and shutter with required hardware fittings as detailed above. 2) The tenderer shall note that the given sizes are approximate and payment will be made as per the actual area of structural opening size. The Tentative size and no’s of sliding windows & high level windows are as follows, a. Window W1 – 37 nos X 3.000m X 1.200m b. Window W2 – 9 nos X 1.700m X 1.200m c. Window W3 – 2 nos X 1.700m X 0.600m d. Window W4 – 8 nos X 3.000m X 1.200m e. Louvers LV1 – 2 nos X 0.750m X 0.600m f. High Level Windows HW1 – 34 nos X 1.200m X 0.600m g. High Level Windows HW2 – 74 nos X 1.800m X 0.600m h. High Level Windows HW3 – 92 nos X 0.475m X 0.600m i. High Level Windows HW4 – 28 nos X 0.625m X 0.600m

330

-

-

... More
Providing and fixing glazing with 6mm thick clear Float glass pane in aluminium doors shutters and partitions etc. with Neoprene gasket including cost of neoprene gasket complete as per the drawings and directions of the Engineer-in-Charge.

20

-

-

... More
Providing and fixing Second class Teak wood work in frames of doors, windows, clerestory openings and other frames, wrought framed, fixed in position of required size and shape including sawing, jointing, making rebates for shutters, making grooves as shown in the drawings, architectural beading with teakwood 50x6mm alround, finishing the surfaces to the required finish all as per specifications and drawings including necessary MS hold fasts 300mm long, 5mm thick or with rawl plugs and screws including protective painting to the surface that will come in contact with walls, joining materials, labour etc. complete all as per specifications and as directed by the Engineer-in-Charge.

0.8

-

-

... More
Providing and fixing ISI marked 35mm thick non-decorative type flush door shutters (single or double leaf and size as per requirement) conforming to IS : 2202, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering, phenol formaldehyde synthetic resin bonded, hot pressed with internal Teak wood lipping of 25mm depth on all sides and fixing with 4 Nos. 150mm Stainless steel Hinges with suitable S.S. screws (8 Nos. 150mm Stainless steel Hinges with S.S. screws for double leaf), Brass aldrop 250mm long complete set with suitable brass screws (2 nos. complete set of brass aldrop 250mm long with brass screws for double leaf), 300mm long brass tower bolt with screws (2 nos 300mm long brass tower bolt with screws for double leaf), 150mm long brass door handle set with brass screws (2 nos. 150mm long brass door handle set with brass screws for double leaf) complete at all lifts and all as directed by the Engineer-in-charge.

8

-

-

... More
Providing, supplying, and fixing in position Factory made WPC Door frame from 'Qute or approved equivalent' of size 75 x 50mm of approved shape including sawing, jointing, as shown in the drawings, finishing the surfaces to the required finish all as per specifications and drawings including necessary MS hold fasts 40mm X 3mm thick 200mm long or with coach screws including joining materials, adhesives, fasteners, labour etc. complete all as per specifications and as directed by the Engineer-in-Charge. Note: Measurement shall be based on actual length of Frame used.

23

-

-

... More
Providing and Fixing 28mm thick factory made WPC door shutters (Wood Plastic composite) from 'Qute or approved equivalent' with minimum density of 600 Kg/ Cu.m of approved make including all accessories & fittings like 3 nos 100mm SS hinges, 2 Nos 125mm Grip aluminium Bow handles, 2 Nos of Aluminium 75mm Baby latch for each door complete all as directed at by the Engineer-in-Charge. (Sample, Model and colour to be got approved before procurement)

4

-

-

... More
Providing and fixing double action floor spring of ‘Hardwin’ or approved brand and manufacturer (confirming to IS:6315) for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece of M.S Sheet outer box with slide plate etc. complete as per directions of Engineer-in-Charge with brass cover plate.

8

-

-

... More
Providing and fixing IS: 3564 marked Al die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. in wooden doors / steel doors with necessary bolts & nuts "Everite / Hardwyn" or approved equivalent make complete as per specifications and as directed by the Engineer-in-Charge.

3

-

-

... More
Providing and fixing 4 Lever Dead/Mortice Lock ‘Godrej/Everite’ or other approved equivalent make suitable for aluminium door with a pair of keys complete all as per specification and drawings.

5

-

-

... More
Providing and fixing 1st quality ceramic glazed floor/wall tiles confirming to IS 15622 of approved make in approved size, shade and colour (as approved by Engineer-in-charge), free from cracks, fissures & flakes with straight edges & perfect corners fixed at right angles as per design and pattern required over a bed of 20mm thick bed of cement mortar 1:4 using crushed stone sand (in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 using crushed stone sand), including machine / hand cutting to required size and shape, pointed neatly with white cement mixed with colouring pigment to match colour of tile, properly finished in all respects, curing, cleaning the surface neatly at the time of handing over the area, all materials and labour complete. Note: The sample tile shall be got approved by the Architect/Engineer before procurement.

-

-

-

... More
In flooring fixing with 20mm thick bedding in cement mortar 1:4 using crushed stone sand.

20

-

-

... More
In Dados and skirting laid over 12mm thick backing in cement mortar 1:3 using crushed stone sand.

60

-

-

... More
Providing and fixing VITRIFIED floor tiles in different sizes with water absorption less that 0.08% and confirming to IS 15622 of Marbonite or approved make in all colours and shades in Glossy or Matt or satin finish (as required by Engineer-in-charge) laid over a bed of minimum 20mm thick bed of cement mortar 1:4 using crushed stone sand (in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 using crushed stone sand) including machine/hand cutting to required size & shape, grouting the joints with white cement mixed with coloring pigment to match colour of tile patterns, curing, cleaning the surface neatly at the time of handing over the area complete all as per drawings and specifications. Note: The sample tile shall be got approved by the Architect/Engineer before procurement.

-

-

-

... More
In flooring, tile size of 900x900mm fixing with 20mm thick bedding in cement mortar 1:4 using crushed stone sand.

260

-

-

... More
In Dados and skirting laid over 12mm thick backing in cement mortar 1:3 using crushed stone sand.

20

-

-

... More
Providing and laying polished Kota stone for flooring & Skirting of required size as specified colour, free from cracks, fissures & flakes with straight edges & perfect corners laid at right angles as per pattern over a bedding of cement mortar 1:4 using crushed stone sand, 20mm thick (or backing of cement mortar 1:3 using crushed stone sand, 12mm thick as mentioned below) pointed neatly with white cement mixed with coloring pigment to match colour of slab and finished in all respects, including machine / hand cutting to required size and shape, curing, moulding and polishing of exposed edges, fixing stone to level and plumb, cleaning the surface neatly at the time of handing over the area, all materials and labour complete as per specifications and as directed by the Engineer-in-Charge. Note: The sample Kota stone slab shall be got approved by the Architect/Engineer before procurement.

-

-

-

... More
Kota stone flooring, 25mm thick Kota stone slab fixing in 20mm thick bedding, cement mortar 1:4 using crushed stone sand.

225

-

-

... More
In steps / step thread, 25mm thick Kota slab of required colour, Moulding and polishing of exposed edges, fixing with 20mm thick bedding in cement mortar 1:4 using crushed stone sand. The Kota stone slab shall be single length to match step length.

120

-

-

... More
In skirting 20mm thick Kota stone slab laid over 12mm thick backing in cement mortar 1:3 using crushed stone sand.

23

-

-

... More
In step risers 20mm thick Kota stone slab laid over 12mm thick backing in cement mortar 1:3 using crushed stone sand. The granite slab shall be single length to match step length.

57

-

-

... More
Providing 50mm thick concrete flooring with metallic concrete hardener topping at all levels and floors consisting of under layer of 35mm thick cement concrete 1:1:2 using crushed stone sand (1 part Cement : 1 part Fine aggregate : 2 part Coarse aggregate of 12.5mm and below size) by volume, top layer of 15mm thick 1:2 mix (1 part cement with metallic hardener of Hardonate / Ironite or approved equivalent : 2 parts of stone aggregate of 6mm nominal size by volume) (metallic hardener and cement mixed ratio is 1:4) prepared as per manufacturer's instructions including chipping the concrete surface, finishing, curing, providing aluminium dividing strips, cleaning the surface neatly at the time of handing over the area etc. complete all as per specifications and drawings.

3800

-

-

... More
Providing and laying 25mm thick Indian patent stone flooring and skirting with cement concrete 1:2:4, using 10mm and below size hard broken granite stone jelly and crushed stone sand including dividing strips, laying in panels, consolidating, curing, rubbing the surface smooth, cleaning the surface neatly at the time of handing over the area complete all as per specifications and as directed by the Engineer-in-Charge.

210

-

-

... More
Providing and laying approved quality mirror polished Granite slabs of 18mm thick for flooring , dadoing & Skirting of required size & specified colour, pattern and free from cracks, fissures & flakes with straight edges & perfect corners laid at right angles as per pattern over a bedding of cement mortar 1:4, 20mm thick for flooring (or backing of cement mortar 1:3, 12mm thick for dadoing) pointed neatly with white cement mixed with coloring pigment to match colour of slab and finished in all respects, including machine / hand cutting to required size and shape, moulding and polishing of exposed edges, fixing stone to level and plumb, anti-skid grooves for steps, curing, cleaning the surface neatly at the time of handing over the area, all materials and labour complete. Note: The sample Granite slab shall be got approved by the Architect/Engineer before procurement.

75

-

-

... More
Providing and fixing Access flooring system (Unitile USF 1000 HPL panels 600 x 600 x30 mm with ESRG under structures) with edge support rigid grid understructure system. Access floor system to be installed shall provide a maximum finished floor height of 300mm from the existing floor level. The system shall provide for suitable floor tiles, pedestals and stringers designed to withstand various static loads and rolling loads and where ever required necessary suitable cement slurry injectable mortar HIT RE500 is to be done as per the specialist requirement. The entire access floor system shall be made from steel cementitious infilled. Access floor tiles shall provide for adequate fire properties, acoustic barrier and air leakage resistance. The panel is then laminated with 1.5mm thick fire retardant floor grade Antistatic Laminate/ESD Laminate - PVC /Conductive/Dissipative PVC on a semi automated lamination line to ensure maximum bonding to the steel structure. The edges of the laminated are protected with conductive PVC trim 5mm wide on all sides. This edge trim is mechanically locked and sealed in place to avoid detachment. The rate shall be inclusive of wire manager & tile lifter etc. Note: The vendor has to inspect the site and assess the exact height of false flooring which should include floor finish.

115

-

-

... More
Providing and fixing Venition vertical blinds of Luxaflex or approved equivalent make and approved colour pattern with vanes of 100mm width made up of non woven polyester fabric which are suspended from the silt travelers by self aligning vanes hooly of effective optimized system, vanes shall be coupled together by means of bead chain pivotally attach by closing to each side of each weight and other accessories required complete all as per directed by the Engineer-in-charge.   Note: 1. Sample shall be got approved before commencing work.  2. The above work shall be got executed from approved manufacturers.

45

-

-

... More
Providing & fixing of Armstrong ALUMINIUM lay in standard perforated (2.5mm diameter 16% open area) metal ceiling consisting of 600x600mm lay in tiles in 0.7mm thick aluminium pre coated to global white color without fleece hot pressed on the back of the perforated tile to be laid on Armstrong grid system with 15mm wide T-section flanges colour white having rotary stitching on the main runner. 1200mm & 600mm cross tees. The tiles would have NRC of 0.7 fire performance of class A2-s1 d0 as per EN 13501 standard in module size of 600x600mm, suitable for green building application, worth recycled content of 50%. The grid should be of 'Armstrong' make with 15mm wide T - section glanges colour white having rotary stitching on all T sections. i.e the main runner with c3 coupling 1200mm & 600mm cross tees with hardened XL2 clip having a web height of 38mm and a load carrying capacity of 14kgs/m. The T sections have a Galvanizing of 90grams per Sqm. having pull out strength of 100kgs. Suspension system for Armstrong grid to be of Armstrong make. Installation: To comprise main runner spaced at 1200mm centres securely fixed to the structural soffit using Armstrong suspension system at 1200mm maximum centre. The First/last armstrong suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fittings 1200mm long cross tees to be interlocked between main runner at 600mm centre to form 1200x600mm module. Cut cross tees longer than 600mm required independent support. 600x600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200mm cross tees. Perimeter rim to be armstrong wall angles of size 3000x19x19mm, secured to walls at 45mm maximum centres. Suspension System: Accessories manufactured and supplied by armstrong world industries consisting of M6 anchor fasteners with vertical hangers made of Galvanized steel of size 26x26x25x2.1mm with a Galvanized thickness of 80gsm, Apre straightened hanger wire of dia-2.65mm of 1.8m length, thickness of 80gsm and a tensile strength of 344-413Mpa, along with adjustable hook clips of 0.8m thick, galvanized spring steel for 2.68mm. The adjustable clip also consists of a 3.5mm aquiline wire to be used with the main runner.

520

-

-

... More
Core cutting of reinforced cement concrete in trench wall of 150mm width by using Diamond core drilling equipment, without disturbing the existing structure and making the cutting edges smooth and even, as directed by the Engineer-In-Charge.

-

-

-

... More
150mm Dia

20

-

-

... More
100mm Dia

20

-

-

... More
Designing, providing and fixing of 4mm thick approved make and shade Aluminium Composite Metal Panel (Durabuild or approved make) cladding at different locations including soffits of over-hangs and including MS brackets / Aluminium alloy brackets with grids filled in with weather silicon sealant as per the drawings. The ACM Panel composition shall be of 0.5 mm thick PVDF coated aluminium sheet + 3mm thick low density polyethelene virgin resin core + 0.5 mm thick polyester (PVDF) coated Aluminium sheet. All complete as per approved shop drawings and specification.

100

-

-

... More
Providing and fixing PVC rain water downtake pipes conforming to IS:13592 Type A and PVC SWR Fittings & specials confirming to IS:14735, ‘Finolex / Truebore’ or other approved equivalent make of pipes, fittings & specials including jointing with seal ring / with PVC solvent adhesive including fixing in walls/columns using clamps, anchor fasteners, bolts and teakwood packing pieces, joint testing etc. complete all as per drawings, specifications and as directed by the Engineer-in-Charge.

-

-

-

... More
PVC SWR Rain water pipe 160mm outer dia

1000

-

-

... More
Providing and fixing Heavy Quality 'C' Class G.I pipe sleeves 150mm n/b, 450mm long, with Puddle Flange of 250x250mm, 6mm thick for rain water down takes (of 160mm dia) to be embedded in RCC slabs/ RCC roof Gutters to connect Rain water pipes by welding or with screwed sockets all as per the drawings and as directed by the Engineer-in-Charge. These sleeves to be fabricated and embedded at the time of concreting in true vertical.

63

-

-

... More
Providing and fixing Unplastisized PVC (UPVC) pipes in trenches/open pipeline work having thermal stability for hot & cold water supply (as ASTM Standard 2846 & SDR - 11 Grade) including all UPVC Plain & Brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing / under ground. This includes jointing of pipes & fittings with UPVC Solvent cement & testing the joints complete all as per specifications, drawings and as directed by the Engineer-in-Charge.

-

-

-

... More
25mm outer dia UPVC pipe

50

-

-

... More
40mm outer dia UPVC pipe

75

-

-

... More
63mm outer dia UPVC pipe

200

-

-

... More
Providing and laying the following sizes PVC water supply line with 'Finolex / Varun / Truebore' or approved equivalent make PVC pipes suitable for 6 kg/sq.cm pressure and specials confirming & marked to IS:4985 including jointing with PVC jointing compound, laying and fixing the pipes in the excavated trenches, cost of all types of specials such as tees, reduces, coupler, reducing bushes, threaded adaptor, elbow, tail pieces, caps etc., and testing the line as directed by the Engineer-in-Charge.

-

-

-

... More
40mm outer dia PVC pipe

30

-

-

... More
63mm outer dia PVC pipe

40

-

-

... More
110mm outer dia PVC pipe

50

-

-

... More
Providing and fixing under ground selfit SN 8 sewer pipes conforming to IS:15328 including suitable Fittings & specials confirming to IS:15328, ‘Finolex’ or other approved equivalent make of stiffness class 8 KN/SQ.M and minimum wall thickness of 5.9 mm including jointing with seal ring / with PVC solvent adhesive including laying in excavated trenche, joint testing etc complete all as per drawings, specifications and as directed by the Engineer-in-Charge.

-

-

-

... More
160mm outer dia pipe

250

-

-

... More
Providing and fixing prayag or other approved equivalent make High pressure casted body brass float valve 25mm dia bearing ISI mark and indian standered no:1703:2000 on body, confirming to IS:1703 including the cost of HDPE ball and 450mm length brass rod threaded on both side to suit the valve on one side and the ball on the other side and all labour charges etc., as directed by the Engineer.

1

-

-

... More
Providing and fixing PVC Nahani Trap / Floor Trap of 100mm inlet and 75mm outlet, jointing with Lead with the connection pipes, placing as per the drawings, including embedding in cement concrete 1:2: 4 and making circular hole up to floor level using 110mm O/D PVC pipes of 6 Kgs / sq.cm pressure and fixing 1 No 125mm dia C. P Brass Grating , complete all as specifications and drawings and as directed by the Engineer-in-Charge.

4

-

-

... More
Providing and constructing Gully Chamber of internal size 300x300mm including providing, supplying and fixing 150 x 150mm stoneware gully trap with CI grating including excavation in all types of soils, backfilling, embedding in plain cement concrete 1:4.5:8 using 40mm size granite aggregates, crushed stone sand and constructing the above chamber with 115mm thick brick work in cement mortar 1:4 using crushed stone sand with well burnt chamber bricks, plastering over both internal and external faces of brick work with cement mortar 1:3 using crushed stone sand, 12mm thick finished smooth with a floating coat of neat cement on both faces, providing and fixing CI cover with frame of 300 x 300mm size (inside) the weight of cover to be not less than 4.5 kg and frame to be not less than 2.70 kg as per standard design complete all as per specification and as directed by the Engineer-in-Charge.

2

-

-

... More
Providing and Construction of Inspection chamber of following size internally upto 1.00metre depth with brick masonry walls of 230/345mm thick using stock bricks in cement mortar 1:5 using crushed stone sand with necessary brick carbelling as required, plastering with cement mortar 1:3 using crushed stone sand, 12mm thick finished smooth with a floating coat of neat cement inside chamber and with cement mortar 1:5 using crushed stone sand, 12mm thick for external sides of the chamber including excavation in all types of soils, back filling, providing and laying 150mm thick PCC 1:4.5:8 using crushed stone sand for foundation concrete forming bencing in PCC 1:2:4 using 20mm maximum size graded aggregate and crushed stone sand etc. complete all as per specification, drawing and as directed by the Engineer-in-Charge.

-

-

-

... More
Inspection chamber of internal size 600x600mm

7

-

-

... More
Extra depth over initial depth of 1 metre or part of a metre depth with necessary modification to the thickness of chamber wall to suit site requirement as per drawing and as directed by the Engineer-in-Charge of Inspection chamber of size 600x600mm

12

-

-

... More
Supplying and fixing in position of heavy quality Cast Iron manhole frame and cover, steps etc of specified weight for the inspection chamber, valve chamber etc. all as per specifications and as directed by the Engineer-in-Charge.

350

-

-

... More
Providing, fixing, testing and Commissioning of white / color or colors glazed vitreous Chinaware Wall Hung European type water closet with coupled flushing Cistern of 'PARRYWARE' make or approved equivalent comprising of: i) White/ color Glazed vitreous chinaware wall mounted European Water Closet of "Cascade" range of make "Parryware" or other approved equivalent make with "P" Trap. Parryware -cascade-item code no:C0219 ii) Dual flush set along with dual flush fittings internal, Cascade cistern shell and lid dual flush cistern of "Cascade" range of make "Parryware" or other approved equivalent make. iii) Antimicrobial solid seat cover of "Cascade" range of make "Parryware" or other approved equivalent make along with bolt fixing set. iv)Works including of fixing of 15mm brass CP angle valve with CP brass connection tube with check nut to the cistern inlet point of Jaquar make. v) Works including cutting and making good the walls /floor wherever required, including cost and conveyance of all materials to the site, all labour charges, etc., complete finished item of work and as directed by the Engineer-in-charge. Note:- i) The rate shall be inclusive of fixing of closet in wall using 16mm dia rag bolt, 100mm dia mouthwash bush, 32mm flush ring bush, etc., all complete as directed by Engineer-in-charge. ii) The sample of sanitary fittings shall got approved by Engineer-in-charge before making bulk order

2

-

-

... More
Providing and fixing Coloured vitreous china flat back half stall urinal size 580 x 380 x 350mm Hindware or Parryware Newmagnum model or Equivalent approved make with PVC 15mm Inlet connection, Push cock, 15mm stop cock, C.P. brass spreaders, 32mm Urinal waste coupling with Dome grating, and clamp etc. including making G.I water line connection complete all as per drawings and specifications and as directed at site. (Only G.I. pipes will be paid under relevant Item)

1

-

-

... More
Providing and fixing C.P Brass towel rail 600mm long of 'Jaquar' make complete fixed to walls with 30mm CP brass screws with concealed fitting arrangement all as directed by the Engineer-in-Charge.

2

-

-

... More
Providing and fixing 5mm thick first quality mirror of required size with anodized aluminium section frame work of size 30 x 20mm, backing the mirror with 4mm thick AC plain sheet painting two coats of plastic emulsion paint over a coat of primer, fixing the entire unit on the wall surface with necessary screws etc. complete all as directed by the Engineer-in-Charge.

1.5

-

-

... More
Providing and fixing liquid soap dispenser "SDR-WHT-DJ001 F- JAQUAR or AKP-35735P Soap Dispenser with Glass bottle" or approved equivalent make with all accessories including necessary screws for fixing complete all as directed by the Engineer-in-Charge.

2

-

-

... More
Providing and fixing Heavy Quality C.P. brass 15mm dia long body Bib cock “Jaquar continental / Parryware coral model” or approved equivalent as per specifications and as directed by the Engineer-in-Charge. (Samples to be got approved by the Engineer-in-Charge)

4

-

-

... More
Providing and fixing Heavy Quality C.P Brass Health Faucet with 1.50metres flexible hose (Hand Shower) of “Jaquar continental model” or approved equivalent make and type complete all as per specifications and as directed by the Engineer-in-Charge (Samples to be got approved by the Engineer-in-Charge)

2

-

-

... More
Providing and fixing Heavy Quality C.P. brass 15mm dia Two Way Bib cock “Jaquar or approved equivalent” as per specifications and as directed by the Engineer-in-Charge. (Samples to be got approved by the Engineer-in-Charge)

2

-

-

... More
Providing and fixing following dia uPVC ball valve pasting/thread type including the cost of labour charges, pasting solution etc., as directed by the Engineer-in-Charge.

-

-

-

... More
25mm n/b

2

-

-

... More
40mm n/b

3

-

-

... More
63mm n/b

3

-

-

... More
Providing and fixing Viterious china white wash basin CNS - WHT-705/parryware/Hindware under counter wash basin 590x420x195 including providing and fixing Heavy Quality C.P Brass Foot operated push type - Pillar Cock of Jaquar/Parryware make and type or approved equivalent make, inlet connection as approved and any other necessary fixtures required for foot operated tap, 15mm stop cock, 32mm Heavy quality C.P. brass waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls and testing complete all as per specifications and as directed by the Engineer-in-charge.

2

-

-

... More
Supplying and fixing of FRP manhole cover of 900mm dia (or 900 x 600mm) - heavy class with load carrying capacity of 25 tonnes field in for manhole cover, water tank cover etc., The rate including supplying and transportation, fixing at position with levels and alignment, also including the cost of cement mortar and labours to packing and finishing etc. as per the instruction of Engineer- in-Charge.

20

-

-

... More
Supplying and fixing FRP grating of mesh size 38mm *38mm and rib thickness of 5 to 7mm for storm water cover slab including curved shape drain including chipping brick work and packing after fixing gratings etc, as directed by Engineer-in-Charge.

100

-

-

... More
Providing and fixing FRP Ladder of size 0.45m width and 7.000m height comprising vertical post of size 75 x 75 x 6mm and horizontal rungs of 12mm dia @ 250mm C/c. FRP Ladder is to be provided with FRP cage of circular shape including all fixtures, preparation of the surfaces, scaffolding, complete all as per specifications and as directed by the Engineer-in-Charge. Note: Rate shall be inclusive of SS anchor bolts or Hilti system for installation of FRP ladder.

115

-

-

... More
Dismantling Plain Cement concrete by manually / by mechanical means at all levels, carefully without damaging adjacent structures including disposal of debris with 50m lead, labour, tools required etc. complete in all respects as per specifications and directed by the Engineer-in-charge.

10

-

-

... More
Dismantling of RCC works at all levels by manually / by mechanical means, including Cutting and stacking of steel reinforcement bars and disposal of unserviceable materials within 50m lead as per specifications and directed by the Engineer-in-charge.

5

-

-

... More
Dismantling brick work in cement mortar at all levels by manually / by mechanical means, carefully without damaging adjacent structures including stacking of serviceable materials and disposal of unserviceable materials within 50m lead all as per specifications and directed by the Engineer-in-charge.

5

-

-

... More
Demolishing Stone rubble masonry in cement mortar at all levels by manually / by mechanical means, carefully without damaging adjacent structures including stacking of serviceable materials and disposal of unserviceable materials within 50m lead as per direction of Engineer-in-charge.

70

-

-

... More
Providing and fixing M.S. bolts including nuts and washers of approved size, quality and make as per requirements complete all as per specifications, drawings and as directed by the Engineer-in-charge.

20

-

-

... More
Providing and laying 65mm thick rubber moulded with vibratory compaction Factory made cement concrete precast Interlocking paver block of M30 grade made and approved size, shape, design, colour & pattern including laid over 100mm thick compacted bed of crushed stone sand (coarse sand), filling the joints with coarse sand, compaction mechanically etc. all complete all as per the direction of the Engineer-in-Charge. Note: The sample tile shall be got approved by the Engineer-in-charge before procurement.

200

-

-

... More
Hydro Testing the following liquid retaining structures including all arrangements for filling of individual compartment separately to its capacity as per drawing at all level, emptying the compartment after the testing with potable water (To be supplied by the contractor), providing required temporary measures to close the pipe sleeve with suitable MS flanges, pumping system, testing for leak tightness of concrete as specified, sealing, finishing the surface to obtain leak tightness as per specification and as directed to the satisfaction of the EIC. Note: The cost of grouting shall be borne by the contractor if any defect noticed during leak test.

-

-

-

... More
Clarified water storage tank, UF Filtered water storage tank, Reject water storage tank, SWRO permeate storage tank

4250

-

-

... More
Providing and fixing chicken-mesh reinforcement of 1.5mm dia steel wire with hexagonal or rectangular openings of 10 to 13mm, fixing using nails, including cutting of required sizes complete all as per specification and as directed by the Engineer-in-Charge.

300

-

-

... More
Supplying, providing, fixing 10mm thick Neoprene sheet of approved quality (conforming to ASTM D 412 and ASTM D 676), tensile strength min. 175Kg/sqcm, elongation min. 35%, suitable shape as mentioned in the drawing and specification. Cost to include preparation of surface, supply of necessary tools, scaffolding, manpower etc., complete at all levels as per drawings, for horizontal surface as directed by the Engineer-in-Charge.

100

-

-

... More
Providing and fixing 1st quality one course of cool roof tiles ceramic / full body vitrified cool tiles of Johnson Endura cool roof SRI series / Somany Temp shield / Insulla cool roof tile / Thermatek or approved equivalent (as approved by EIC) using tiles of size 300x300mm and 10mm (±1mm) thick of with SRI (Solar Reflectance Index) 78, Solar reflection 0.70 & initial emittance 0.75 or approved size, shade and colour (as approved by Engineer-in-charge), free from cracks, fissures & flakes with straight edges & perfect corners fixed at right angles as per design and pattern required over roof slab / sloped surface of terrace and skirting laid on water proof cement mortar specified below, fixing as per manufacturer recommendation, including machine / hand cutting to required size and shape, grouting and cleaning the surface, exposing floor & wall function along parapet and column if any, cleaning the surface neatly at the time of handing over the area, all materials and labour complete. Note: 1) The sample tile in respect of brand, thickness, shade, finishes or charges of tiles has to be got approved by the Architect/Engineer before procurement. 2) Fixing method has to be got approval of EIC. 3)The water proofing treatment should be done by an agency specialized in the job having sufficient knowledge of water proofing treatment. Suggested vendors : (a) M/s. Cera-Chem Pvt. Ltd., Chemicals (b) M/s. Fosroc chemicals (c) M/s. Sika India Pvt. Ltd. Chemicals. 4)This item includes tile fixing compound / adhesive if any required as instructed by EIC & water proofing slurry (as approved system) required for fixing of tiles required as per manufacturer recommendation as per EIC instruction. 5)Tiles fixing and water proof coats and layers has to follow the curing period strictly as per manufacturer recommendation and as per EIC instruction. 6)Testing charges of tiles shall be borne by the contractor. Cool roof - Tile fixing base layers of mortar & treatment to be done/coat as follows : a) 1st Bonding coat: Providing and applying two coats of bonding slurry agent of CERA LATEX SBR / Pidilite (RBR - SBR) / FOSROC NITO BOND SBR or equivalent to the cleaned and prepared concrete surface proposition as per manufacturer recommendation. b) Base coat of Polymer modified mortar : Applying polymer modified mortar 1:2:2 (1 cement : 2 sand: 2 stone Aggregate of nominal size 6mm) admixed with CERA LATEX SBR / Pidilite (RBR - SBR) / FOSROC NITO BOND SBR or equivalent @ 3 kg per bag of cement for a thickness of 10mm over the prepared surface. c) Fixing of glass fiber mesh of ‘Gyproc or approved equivalent Alkali resistance Glass fibre mesh (4- 5mm square aperture with 145 gsm) or Sika Fabric 50’ fixed in the plastering area / water proof base coat area as instructed by Engineer-in-charge and fixed as per manufacturers recommendation. d) Second coat of Bonding cum water proofing coat: : Providing and applying two coats of bonding slurry agent of CERA LATEX SBR / Pidilite (RBR - SBR) / FOSROC NITO BOND SBR or equivalent to the cleaned and prepared concrete surface proposition as per manufacturers recommendation. e) Top coat of Polymer modified mortar : Applying polymer modified mortar 1:2:2 (1 cement : 2 sand: 2 stone Aggregate of nominal size 6mm) admixed with CERA LATEX SBR / Pidilite (RBR - SBR) / FOSROC NITO BOND SBR or equivalent @ 3 kg per bag of cement for a thickness of 20mm over the prepared surface. The rate includes cleaning the slab surface of all mortar fallings, opening, filling / grouting cracks, grouting junctions of tiles, injection grouting to RCC surfaces, necessary curing and drying period for each coat, providing proper bonding keys in each layer vata on all sides.

2600

-

-

... More
Supply & Installation of 12 way Indoor, Double Door, phase segregated Lighting Distribution Boards (LDB) of reputed make in brick wall/concrete slab. LDB shall be of 14 SWG sheet steel, concealed in wall and shall have provisions for 4 pole TPN isolator as incomer, 3 Nos. of 2 pole 30 mA ELCB (1 No. for each Phase) as sub incomer and SPN MCBs (12 Nos/phase.) as outgoings. Sheet steel cover shall be provided. MCBs/ELCBs are not included in the scope of contractor. Cost of DB adaptor box and suitable DB pull box should be included in the quoted rate. ( preferred Make : Siemens/Crabtree/Havells/L&T/indoasian )

3

-

-

... More
Supply & Installation of 8 way Indoor, Double Door, phase segregated Lighting Distribution Boards (LDB) of reputed make in brick wall/concrete slab. LDB shall be of 14 SWG sheet steel, concealed in wall and shall have provisions for 4 pole TPN isolator as incomer, 3 Nos.3Pole 30 mA ELCB (1 No. for each Phase) as sub incomer and SPN MCBs (8 Nos/phase.) as outgoings. Sheet steel cover shall be provided. MCBs/ELCBs are not included in the scope of contractor. Cost of DB adaptor box and suitable DB pull box should be included in the quoted rate. ( preferred Make : Siemens/Crabtree/Havells/L&T/indoasian )

6

-

-

... More
Supply & Installation of 4 way Indoor, Double Door, phase segregated Lighting Distribution Boards (LDB) of reputed make in brick wall/concrete slab. LDB shall be of 14 SWG sheet steel, concealed in wall and shall have provisions for 4 pole TPN isolator as incomer, 3 Nos. 3Pole 30 mA ELCB (1 No. for each Phase) as sub incomer and SPN MCBs (4 Nos/phase) as outgoings. Sheet steel cover shall be provided. MCBs/ELCBs are not included in the scope of contractor. Cost of DB adaptor box and suitable DB pull box should be included in the quoted rate. ( preferred Make : Siemens/Crabtree/Havells/L&T/indoasian )

1

-

-

... More
Supply & Installation of 12 Module GI Flush metal box in brick wall/concrete slab suitable for modular devices like switches , sockets , tele phone jacks etc. Preferred make: Havells ,Siemens, ABB, Crabtree, L&T or Equivalent.

15

-

-

... More
Supply & Installation of 6 Module GI Flush metal box in brick wall/concrete slab suitable for modular devices like switches , sockets , tele phone jacks etc. Preferred make: Havells ,Siemens, ABB, Crabtree, L&T or Equivalent,.

30

-

-

... More
Supply & Installation of 3 Module GI Flush metal box in brick wall/concrete slab suitable for modular devices like switches , sockets , tele phone jacks etc. Preferred make: Havells ,Siemens, ABB, Crabtree, L&T or Equivalent,.

50

-

-

... More
Supply & Installation of 1/2 Module GI Flush metal box in brick wall/concrete slab suitable for modular devices like switches , sockets , tele phone jacks etc. Preferred make: Havells ,Siemens, ABB, Crabtree, L&T or Equivalent,.

50

-

-

... More
Supply and Erection of 25MM dia 1.8mm thick ISI marked Hot dipped Heavy duty GI Conduit in brick wall/concrete roof slab including coupler, reducer and bends, etc. The rate shall also include supply and erection of 14SWG bare copper earthing wire and copper clip fixed at a regular interval of 500mm.

3500

-

-

... More
Supply and Erection of 32MM dia 1.8mm thick ISI marked Hot dipped Heavy duty GI Conduit in brick wall/concrete roof slab including coupler, reducer and bends, etc. The rate shall also include supply and erection of 14SWG bare copper earthing wire and copper clip fixed at a regular interval of 500mm.

500

-

-

... More
Supply and Erection of 40MM dia 1.8mm thick ISI marked Hot dipped Heavy duty GI Conduit in brick wall/concrete roof slab including coupler, reducer and bends, etc. The rate shall also include supply and erection of 14SWG bare copper earthing wire and copper clip fixed at a regular interval of 500mm.

150

-

-

... More
Supply and Erection of Heavy Duty 75mm Deep, GI, 1/2/3/4 way Junction Boxes /Pull boxes in brick wall/concrete roof slab as required based on final conduit layout. Suitable for 25mm dia conduits.

1300

-

-

... More
Supply and Erection of Heavy Duty 75mm Deep, GI, 1/2/3/4 way Junction Boxes /Pull boxes in brick wall/concrete roof slab as required based on final conduit layout. Suitable for 32 mm dia conduits.

270

-

-

... More
Supply and installation of Flush & Surface mounted Krone type telephone distribution box with terminal blocks to support 50 pair

3

-

-

... More
Supply and installation of Mild steel Pull boxes of size 100 x 100 x 75 mm, 2 mm thickness and hot dipped galvanised on both inside and outside. Provision of conduit entries for 25 mm / 32 mm / 38 mm to be sufficiently provided along with earthing termination bolt inside and outside.

200

-

-

... More
Supply and installation of Mild steel Pull boxes of size 150 x 100 x 75 mm, 2 mm thickness and hot dipped galvanised on both inside and outside. Provision of conduit entries for 25 mm / 32 mm / 38 mm to be sufficiently provided along with earthing termination bolt inside and outside.

50

-

-

... More
Supply and installation of Mild steel Pull boxes of size 200 x 200 x 100 mm, 2 mm thickness and hot dipped galvanised on both inside and outside. Provision of conduit entries for 25 mm / 32 mm / 38 mm to be sufficiently provided along with earthing termination bolt inside and outside.

20

-

-

... More
Supply and installation of Mild steel Pull boxes of size 300 x 200 x 100 mm, 2 mm thickness and hot dipped galvanised on both inside and outside. Provision of conduit entries for 25 mm / 32 mm / 38 mm to be sufficiently provided along with earthing termination bolt inside and outside.

30

-

-

... More
Supply and installation of Mild steel Pull boxes of size 300 x 200 x 150 mm, 2 mm thickness and hot dipped galvanised on both inside and outside. Provision of conduit entries for 25 mm / 32 mm / 38 mm to be sufficiently provided along with earthing termination bolt inside and outside.

10

-

-

... More
Supply and installation of 50NB GI Pipe of Class B Grade in brick wall/concrete slab

20

-

-

... More
Supply and installation of 100NB GI Pipe of Class B Grade in brick wall/concrete slab

10

-

-

... More
Supply & Installation of Circular box type fan clamps suitable for 25 mm dia GI conduit in RCC Roof slab.

50

-

-

... More
Supply and embedment of metal clad Plug and socket box in brick wall suitable to accommodate one no. 20 Amps metal clad socket and one No. 20 Amps double pole MCB and neutral link with provision for earthing.

20

-

-

... More
Overall rebate (Optional)

-

-

-

... More
INR Zero Only

-

-

-



Evaluation Notes How It Works ?

Potential Partner

Select Your Requirements

Past Bidders
This list is curated from the bidders of the similar tenders in the past

Unlock the Tender details for free
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.