Indian Institute Of Information Technology Design And Manufacturing Tender

Supplying, delivering, and placing in position a wooden table of dimensions 1500mm (L) x 900mm (W) x 750mm (H) The table frame shall be fabricated from 50mm x 50mm square steel pipes (Makes: TATA / SAIL / JINDAL) with a minimum thickness of 2.6 mm. The metal frame shall be powder-coated with a 50-micron finish. The table shall be provided with adjustable foot screws at the bottom to facilitate levelling on uneven surfaces. The table top shall be made from 25mm thick pre-laminated high-density moisture-resistant (HDMR) MDF (Makes: Kitply / Century / Sharonply) board of an approved shade and all working edges machine-pressed with 2mm thick PVC edging, applied using special hot melt glue at high temperature. The table shall also feature an integrated wooden raceway box, with a minimum size of 100mm x 100mm, designed with an open/closing hinge-type mechanism to allow easy access for fixing electrical and data boxes inside (Illustrated image given below for reference). Note: This specification pertains exclusively to the furniture component of the workstation. The costs associated with electrical wiring, network installation, and related infrastructure, as outlined in PART B shall be quoted separately.

1 No. of 3 pin, 5/6A rating modular socket outlet including connections etc., as required.

Black

Supplying, fixing & termination of suitable size 2 module PVC box with Suitable for RJ45 LAN modular plate and cover in front on surface or in recess or in wooden table, including providing and fixing of 2 No's of RJ 45 LAN socket, connections etc., as required. Make: Legrand-Myrius/ Crabtree-Thames

Supply and fixing of 32 mm x 20 mm size PVC cable management, L bends, end caps along with required necessary fixing requirements. Make: Legrand/ MK

Supply and drawing following UTP 4 pair twisted CAT - 6 LAN cable in existing surface/recess/PVC conduits and including crimping, termination, Numbering at both end as required. Make: Polycab/ Molex/ Finolex

Black

6 module PVC box with modular plate, cover and box in front on surface or in recess or in wooden/metal table, including providing and fixing etc.,

Supply & drawing of 1" size PVC ordinary hose for wires with required all accessories etc., ISI marked

1 No. of 5/6A rating modular switch including connections etc., as required.

Supplying, cutting, fixing and installation of 12 mm thick ply wood with colour lamination wherever required for installation of electrical boxes etc., ISI Marked

3 module PVC box with modular plate, cover and box in front on surface or in recess or in wooden/metal table, including providing and fixing etc.,

8 module PVC box with modular plate, cover and box in front on surface or in recess or in wooden/metal table, including providing and fixing etc.,

1 No. of 6 pin, 15/16A rating modular socket outlet including connections etc., as required.

Supplying, fixing & termination of suitable size 1 module PVC box with Suitable for RJ45 LAN modular plate and cover in front on surface or in recess or in wooden table, including providing and fixing of 1 no. of RJ 45 LAN socket, connections etc., as required. Make: Legrand-Myrius/ Crabtree-Thames

32 mm (11/4" PVC pipe)

Supply and fixing of 100 mm x 50 mm size PVC cable management, L bends, end caps along with required necessary fixing requirements. Make: Legrand/ MK

Green

25 mm (1" PVC pipe)

1C x 4 Sq.mm for UPS Power (1-ph)

Red/Yellow/Blue

Red/Yellow/Blue

Green

Supplying, fixing, testing and commissioning of the following suitable size modular type PVC box, plate, cover, switch, socket and connections etc.in the wall/surface/recess with wooden planks, including wood / table cutting and making good etc., as required. Make: Legrand-Myrius/ Crabtree-Thames

Supplying, delivering, and placing in position a modular computer table arranged in a back-to-back configuration, forming a 75mm Modular Aluminium (Aluminium Makes: HINDALCO/NALCO/BALCO) Running Workstation at a uniform height of 1200mm. The workstation shall include a 75mm aluminium modular cabling raceway, fabricated from 1.2 mm thick aluminium and powder-coated with a 50-micron finish. The workstation shall be equipped with a pin-up board provision, along with an integrated data and electrical wire management system, embedded within the modular aluminium framework to facilitate efficient cable organization. The table top shall be fabricated using high-density moisture-resistant (HDMR) MDF (Makes: Kitply / Century / Sharonply) board with pre laminated finish and all working edges machine-pressed with 2mm thick PVC edging, applied using special hot melt glue at high temperature. The table top shall be supported on side panels and a modesty panel, both made from 18mm thick (HDMR) MDF board with pre laminated finish. The workstation design shall be without a keyboard tray and CPU tray. (Illustrated image given below for reference). Table Size: 900mm (L) x 750mm (W). Note: This specification pertains exclusively to the furniture component of the workstation. The costs associated with electrical wiring, network installation, and related infrastructure, as outlined in PART B shall be quoted separately.

Supply, drawing, termination and testing of following sizes of FRLS or FRLSH, PVC insulted multi-stranded copper conductor wire should be in line with the incoming phase colour, 1.1KV grade in existing surface / recess / PVC conduits, including floor cutting & finishing by placing of all the accessories & lugs as per the requirement complete etc. Make: Finolex/ Polycab/ RR kabel/ Havells

1C x 4 Sq.mm for Raw Power (1-ph)

Supplying, delivering, and placing in position a Faculty Main Table with Side Table, having a main table size of 1800mm (L) x 900mm (W) x 750mm (H) and an attached side table of size 1200mm (L) x 450mm (W), which shall include a keyboard tray. The entire table, including the table top, side table, legs, and modesty panels, shall be manufactured using high-density moisture-resistant (HDMR) MDF (Makes: Kitply / Century / Sharonply) board. The table top and side table top shall be 25mm thick HDMR MDF board, with matching 2 mm edge banded formed finish. The table legs and modesty panels shall also be 25mm thick HDMR MDF board, with matching 2 mm edge banded formed finish. The main table shall be provided with an attached side drawer unit with locking arrangements and the keyboard tray shall be provided on the side table.

Supplying, delivering, and placing in position a Dining Table made using a stainless steel tubular section frame and a polished granite table top. The overall size of the table shall be 1800mm (L) x 900mm (W) x 730mm (H), with a single-piece 18mm thick polished granite slab (RUBY RED) as the table top with bevelled edges all around, full round nosing, and a 2mm deep groove on all open edges, as per the approved design. The table frame shall have an overall size of 1600mm (L) x 700mm (W) and shall be fabricated entirely from 40mm x 40mm x 1.6mm square section stainless steel of 304 grade (Makes: TATA / SAIL / JINDAL). The frame shall be designed with four sturdy legs and an under structure frame with a footrest. All joints in the frame shall be precisely aligned and welded using Stainless Steel TIG welding rods, ensuring full contact length. The welds shall be buffed and polished to achieve a seamless, smooth finish. The granite top slab shall be securely fixed to the frame using high-strength adhesive. The legs of the table shall be provided with external type PVC bushes, with a minimum height of 50mm and a thickness of 3mm.

Supply & drawing of 1" size PVC cum metallic flexible hose (Heavy duty) for wires with required all accessories etc., ISI marked

Supply and fixing of 50 mm x 50 mm size PVC cable management, L bends, end caps along with required necessary fixing requirements. Make: Legrand/ MK