Hindu Religious And Charitable Endowments Tender
... More
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
Hindu Religious And Charitable Endowments - HRCE Tender
Civil And Construction
Building Construction
Eprocure
Opening Date13 Mar 2025
Closing Soon9 Apr 2025
Tender Amount₹ 3,52,33,870
Technical
Technical
Class Of Bidder
... View More
The class eligibility requirement to bid or participate in this tender is Class- III or Class- I.
Technical Capacity
... View More
The required prior work experience for the bidder varies based on the value of the work. For values above Rs. 5.00 lakhs and up to Rs. 10.00 lakhs, the bidder should have a technical personnel with a degree in Civil Engineering or equivalent, or a retired Sub-Divisional officer or a Diploma holder with three years of experience. For values above Rs. 10.00 lakhs and up to Rs. 25.00 lakhs, the bidder should have one B.E. (Civil) with 3 years of experience plus one Diploma holder in Civil Engineering, or an Equivalent Degree holder with 3 years of experience plus one Diploma holder in Civil Engineering, or a retired Sub-Divisional officer plus one Diploma holder in Civil Engineering, or two Diploma holders in Civil Engineering with 3 and 5 years of experience respectively. For values above Rs. 25.00 lakhs and up to Rs. 50.00 lakhs, the bidder should have one B.E. (Civil) with 3 years of experience plus two Diploma holders in Civil Engineering, or one B.E. (Civil) with 3 years of experience plus two retired junior engineers, or an Equivalent Degree holder with 3 years of experience plus two Diploma holders in Civil Engineering or two retired junior engineers, or a retired Sub-Divisional officer plus two Diploma holders in Civil Engineering or two retired junior engineers. For values above Rs. 50.00 lakhs, the bidder should have technical personnel with experience as proposed for values above Rs. 25.00 lakhs and up to three years of experience. The bidder should also furnish details of previous work done, including the cost of the work, agreement number, date, department, and other relevant information to assess their previous experience. The bidder should have minimum experience of major building works, with year-wise details to be furnished. However, specific values and percentages of similar works completed are not mentioned. The bidder should have a proven track record and a live certificate, and should have experience in similar nature of work. The monetary limit for eligible contractors is above Rs.200.00 Lakhs. No specific percentage of similar works completed is mentioned, but the bidder should have executed works with a value above Rs.200.00 Lakhs. The experience of the contractor in the particular field may be taken into account from any period of his total career. The annual turnover by the contractor may also be taken into account from any period of his total career. The required prior work experience includes areas such as Irrigation, Head works, Building, Bridges, and others. The bidder should furnish details of previous work done, covering the cost of the work, the agreement, No., date, department in which the work was carried out, etc., year-wise, to assess the previous experience of the tenderers. No specific amount or percentage is mentioned for similar works completed.
Costs
EMD
₹ 1,86,500Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_HRCE_532051_1Tender No
01/2025Tender Authority
Hindu Religious And Charitable Endowments ViewPurchaser Address
-Website
http://tntenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Supplying and filling in foundation, basement, etc, with Sand Gravel mix in ratio 1:1 in layers of not more than 15cm thick thoroughly mixed , well watered, rmmed, and consolideted etc. complete complying with standard specificastion and as directed by the Dept., Officers
154
-
-
... More
Supplying and filling in foundation, basement, etc with filling M sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.(Pg.No.3)
135
-
-
... More
Supplying and filling of gravel by lorry in basement filling including conveyance loading and unloading charges and all other incidential charges filling laying watering and consolidation etc., complete as directed by the Dept., Officers with standard specification.(Pg.No:2)
620
-
-
... More
Refilling with excavated earth other than sand with an initial head load of 100 mts. and depositing the earth as shown by the departmental officers in layers of not more than 15 cm thick well rammed, watered and consolidated etc. complete complying with standard specification (Pg.No:3)
5
-
-
... More
Cement Concrete 1:5:10 (One Cement, Four sand and Eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification
89
-
-
... More
Randum Rubble Masonry in Cement Mortor 1:5 One Cement and five Sand including curing etc complete complying with standard specification(Pg.No:2)
13
-
-
... More
Supplying and erecting steel shuttering including necessary supports for plain surfaces for reinforced cement concrete works such as grade beams, column footing, plinth beam, staircase steps, pedestals bed blocks cover slab etc., using mild steel B.G 10 sheets of size 90cm X 60cm Stiffened with mild steel angles of size 25mm X 25mm X 3mm for boarding laid over silver oak ( Country wood) joists of size 10cm X 6.5cm spaced at about 90cm centre to centre, supported by casurina props 10cm to 13cm diameter spaced at 75cm centre to centre etc., complete complying with standard specification.(Pg.No:5)
617
-
-
... More
Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid) - For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc
1617
-
-
... More
Supplying and erecting steel centering for sides and soffits including supports and strutting up to 3.29 metre height for plain surfaces such as RCC square or rectangular columns, top and bottom slabs of sunshade boxing sill slabs etc., with necessary facia etc., with all cross bracings using mild steel B.G., 10 sheets of size 90cm X 60cm stiffened with welded mild steel angles of size 25mm X 25mm X3mm for boarding laid over silver oak (Country wood) Joists of size 10cm X 6.5cm spaced at about 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre etc., complete complying with standard specification.
1115
-
-
... More
Providing additional strutting to centering of All RCC work for every additional 1.0 metre height or part thereof but not less than 30 cm, over the initial 3.00 metre height from floor level using casurina props of 10cm to 13cm dia including cross bracing etc., complete complying with standard specification and as directed by the department officers.(Pg.No:6)
625
-
-
... More
Providing and laying in position, Standarised Concrete Mix M20 Grade in accordance with IS : 456-2000, using 20 mm and down graded hard brocken granite stone jelly for all RCC items of works with minimum cement content of 325 kg /m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommanded proportions as per IS : 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about ( 5 cum )7730 kg of 20 mm machine crushed stone jelly and with about ( 3.30 cum )5156 kg of 10 - 12 mm machine crushed stone jelly and with about ( 4.79 cum )7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing etc. and providing fixtures like fan clamps in RCC floor / roof slabs where ever necessary without claiming extra etc, complete complying with stsndard specification and as directed by Departmental officers. The course and fine aggrigates to be used should comply with the requirements of IS Standards. ( No separate payment will be made by the Department for the excess usage of materials.)
-
-
-
... More
a. Foundation and Basement
182.3
-
-
... More
b. Groundfloor
145
-
-
... More
c.First floor
32
-
-
... More
d.Second Floor
23
-
-
... More
Providing and laying in position, Standarised Concrete Mix M35 Grade in accordance with IS : 456-2000, using 20 mm and down graded hard brocken granite stone jelly for all RCC items of works with minimum cement content of 325 kg /m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommanded proportions as per IS : 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about ( 5 cum )7730 kg of 20 mm machine crushed stone jelly and with about ( 3.30 cum )5156 kg of 10 - 12 mm machine crushed stone jelly and with about ( 4.79 cum )7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing etc. and providing fixtures like fan clamps in RCC floor / roof slabs where ever necessary without claiming extra etc, complete complying with stsndard specification and as directed by Departmental officers. The course and fine aggrigates to be used should comply with the requirements of IS Standards. ( No separate payment will be made by the Department for the excess usage of materials.)
-
-
-
... More
First floor
110
-
-
... More
Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)
586
-
-
... More
Damp proof course with Cement Mortar 1:4 (One Cement and Four sand) 12mm thick mixed with best approved quality water proofing compound conforming to Indian Standard specification as specified by the departmental officers at 2% by weight of cement used, finishing and curing etc. complete complying with standard specification.
61
-
-
... More
Brick work using using Country Bricks of size 83/4" x4 1/4"x 2 3/4 in Cement Mortar 1:5 (One cement and five sand) including curing neat finishing, etc., complete complying with standard specifiction.
-
-
-
... More
Foundation and Basement
177
-
-
... More
Brick work using using Country Bricks of size 83/4" x4 1/4"x 2 3/4 in Cement Mortar 1:6 (One cement and six sand) including curing neat finishing, etc., complete complying with standard specifiction
-
-
-
... More
Ground floor
122
-
-
... More
First floor
91
-
-
... More
Second Floor
40
-
-
... More
Brick partition walls using best quality using Country Bricks of size 8-3/4" x 4-1/4" X2-3/4" in Cement Mortar 1:3 (One Cement and Three Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately)
-
-
-
... More
Ground floor
42
-
-
... More
First floor
68
-
-
... More
Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.
3344
-
-
... More
Plastering the surface of walls with Cement Mortar 1:3 (One cement and Three sand), 12mm thick in all floors including curing etc., complete complying with standard specification and as directed by the departmental officers.(Pg.No.22)
5
-
-
... More
Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers
1243
-
-
... More
Cement Concrete 1:3:6 (One Cement, Three sand and Six broken stone jelly) using 20mm size hard broken stone jelly excluding cost of centering shuttering reinforcement grills and fabrication charges but including curing etc. complete.(Pg.No.20)
1
-
-
... More
Floor finishing with CM 1:3 Double charged using Vetrified tiles size 600 mm x 600 mm x 8 mm " in all floors over a base layer of cement mortar 1:3 (One cement and three sand) 20mm thick and pointed with colour cement at the rate of 0.3 kg/ sqm including finishing neatly, curing, etc complete, complying with standard specification and as directed by the departmental officers complete. including cost and conveyance of all materials and all labour charges etc complete.
736
-
-
... More
Supplying and in fixing in position fully polished Rajestan Kotta stone of 20mm thick with machine cut edges of size 2' 0'' x 2' 0'' and above laid over base layerof cement mortar 1:3(one cement and three sand) - 20 mm thick & pointed with white cement and pigments to the colour of stones and polished neatly as directed by the deparmental offices.
57
-
-
... More
Flooring with joint free rectified glazed ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
53
-
-
... More
Paving the floor with pre-polished concrete anti-skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
103
-
-
... More
Dadooing walls with following best approved quality, white / colour glazed tiles of 300 x 450 x 8mm sizes set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.
337
-
-
... More
Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.
39
-
-
... More
Finishing the top of roof with one course of machine pressed tiles of size 200mm x 200mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers
505
-
-
... More
Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.
154
-
-
... More
Painting two coats of newly plastered wall surface with ready mixed plastic Interior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.
3663
-
-
... More
Painting two coats of newly plastered wall surface with water based exterior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.
1637
-
-
... More
Supplying and fixing mild steel grill for windows and hand rails etc complete., including cost conveyance of all materials and fixing in position including priming coat etc complete with standard specifications.(Pg.No:10)
2200
-
-
... More
Providing and fixing Hand Rail made of Stainless Steel 304 grade 50.80mm dia. Stainless steel tube of 1.60mm thick at required locations to a height of 1000mm from finished floor level welded to 38.30mm dia stainless steel tube as vertical post of 1.60mm thick at 1.00m centre to centre with 3Nos of 25.40mm dia horizontal stainless steel tubes of 1.60mm thick in between. The cost includes rate for grouting with concrete of the supporting arrangements for vertical rail in to the floor, welding the base cup of the post into slab reinforcement, polising, buffing and protecting the hand rail surface etc., complete complying with standard specification as directed by the departmental officers.(As per SOR Pg.No:62 Item No-M0651)
27
-
-
... More
Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) 10 Sqm
269
-
-
... More
Brick work with Dry Bricks using country bricks of size8¾”x4¼”x2¾” for the following items including curing etc complete complying with standard specification.TNBP No : SS 31 and similar to 31C in Ground floor (Pg.No.29)
1
-
-
... More
Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of following thickness in RCC 1:1.50:3 (one cement, one and hallf sand and three aggregates), using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed. 50mm thick (Pg.No.24)
13
-
-
... More
Providing and Laying Spreading and Compacting graded stone aggregate to Wet Mix Macadam(WMM) Specification including Premixing the material with water at OMC in Machanical mix Plan tcarriage of mixed material by tipper to site laying in uniform layers 250mm thick with Paver sin Sub base/Base course on well prepared surface and compacting with vibratory roller to achieve the desired density including cost of material.labourcharges,rentals for machinery, fuel and all other incidental charges etc., complete(Pg.No:29)
243
-
-
... More
Supplying and Paving the Paver Block flooring using Rubber mould paver block ( Colour ) of standard size over the sand filling of 83mm thick, including laying Compacting with power machine including loading transportation and colour pigments of paver blocks, including cost and conveyance of all materials labour etc complete with standard specification. (Pg.No:29)
2012
-
-
... More
Supplying & fixing iron hold fast of size 230mmx40mmx5mm with necessary screws (S.I.404B)
5
-
-
... More
Supplying and fixing T.W Frames for Doors,Windows, Ventilators and other similar joinery works with the following sizesand sections including labour charges for wrought and put up in position and also for fixing hold fast in frames and masonry etc complete in all floors.
0.16
-
-
... More
Supplying and fixing of Teak Wood Panelled door shutter using Teak wood frame of size 127mm x 76mm and Door shutters Single leaf in position using 35mm thick solid core Flush shutters with teak play on both sides with teak wood lipping alround including cost and labour for fixing the hold fasts and furniture fittings etc.,complete as directed by the departmental officers complying with standard specification.
12
-
-
... More
Supplying & fixing of Collapsible Gate with iron Angles frame of size 40mm x 40mm x 6mm and inner side 12mm Square rods and necessary painting with one coat of Red Oxide primer including cost and conveyance of all materials and all alabour charges etc complete as directed by departmental officers
210
-
-
... More
Supplying and fixing solid core Particle board flush door shutters with both sides 3mm thick commercial ply of 35mm thick with T.W. internal lipping (internal alround) with necessary adhesive and C.P. screws, including fixing of aldrops, tower bolts, hinges and lock strike plates, putty, fevical, varnish for T.W. lipping with thinner colouring agent etc., The rate includes cost of materials and cost for aluminium furniture fittings such as 3 nos Alu. hinges 125mm, 1 no Alu. aldrop 200 x 16mm, 1no Alu. tower bolt of 150x12mm and 1 no Alu.100mm D type Handle 1 no door stopper with rubber bush incase of Single leaf door inclusive of labour charges for fixing in position etc., complete. All Aluminium furniture fittings are to be anodised with matt finish under electrically controlled condition in accordance with ISI specification 1868/1968 for anodic film thickness of not less than 15 microns, The rate is inclusive cost of fevical and fixing charges, transportation, loading, unloading and all other incidential charges, handling charges etc., complete complying with standard specification.
8.5
-
-
... More
Supplying and fixing rigid PVC paneled door shutter made from M.S box section of size 19mmx19mm, 19gauge covered with heat moulded PVC 5mm thick and width of 50mm to form styles and rails. The panel shall be 5mm thick PVC rigid foam sheet inserted into the frame sealed to the styles and rails and 5mmx25mm PVC beading is provided on all sides with furniture fittings etc., complete.
18.5
-
-
... More
Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work
78
-
-
... More
Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm.The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work
37
-
-
... More
Best French (lac) polishing with1 coats S.I.360 to T.W. Doors,Windows, Ventilators, including cleaning the surfacesetc. complete complying with standard specifications.
10
-
-
... More
Supplying and fixing of Cudppah Slab of 38/40 mm thick for the Cup Boards including labour charges for fixing Cudappah Slab to the Cub Boards as directed by the Departmental Staff.
12
-
-
... More
Supplying, laying and jointing glazed stoneware pipes of 100 mm dia of approved best quality with spigot and socket ends (in reverse direction) in dry condition and laid in loose joints (i.e.) without cement and spun yarn, so that the waste water can be drained to the trenches already available, excluding cost of earth work excavation, cost of re-filling with sand / earth, but including laying the pipe in true alignment and gradient and conducting required water supply test for draining with necessary tools and plants, etc., complete complying with standard specifications. (Pg.No:23)
4.8
-
-
... More
Supplying, laying and jointing glazed stone ware pipes of the 150 mm dia of approved quality with spigot and socket ends and fixing them in dry condition using spun yarn and cement including petty masonry shoring and strutting wherever found necessary and laying the pipe line in the alignment at the specified gradient and testing with necessary tools and plants, etc., and re-filling the trench with excavated earth and levelling the ground etc., complete complying with standard specifications. (Earth work excavation, re-filling with excavated earth will be measured and paid separately).(Pg.No:22)
14
-
-
... More
Manufacturing, supplying and fixing in positon of RCC Jali of 5cm thick in cement concrete 1:2:4 using 20mm machine crushed stone jelly (excluding cost of reinforcement steel) including cost of mould, finishing, curing, lifting, fixing in position etc., complete complying with standard specification and as directed (Pg.No:26)
5
-
-
... More
Manufacturing, supplying and fixing in position plain cement concrete precast pavement slab of size 450mm x 450mm of 50mm thick in Cement Concrete 1:2:4 (One cement, Two sand and Four jelly) using 20mm HBG stone jelly including cost of moulding charges, casting of slab, finishing, curing, fixing and pointing the slab with CM 1:3 (One Cement and Three Sand) to full depth of slab etc., complete complying with standard specification and as directed (Pg.No:27)
1
-
-
... More
Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of following thickness in RCC 1:2:4 (one cement, two sand and four aggregates), using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed. 50mm thick(Pg.No:29)
11
-
-
... More
Supplying and fixing in position 110mm dia PVC tee of best quality with spun yarn and conducting necessary water test etc., complete as directed by the departmental officers. Complete complying with standard specification. (The stoneware specials are to be got approved by the Executive Engineer before use on works).(Pg.No:37)
2
-
-
... More
Supplying and fixing PVC ventilating shaft of 110mm dia (having working pressure 4 kg. / sq.cm) with 3 metre height including cost of PVC cylindrical cowl of best approved quality etc., complete complying with standard specifications and as directed by the departmental officers(Pg.No:18)
1
-
-
... More
Supplying laying and jointing UPVC pipes of super thick of approved quality and best quality conforming to ISS and with ISI mark of the following sizes including cutting threading and fixing uPVC specials but excluding cost of such specials. Fixing into Bore well / below ground level for erection of compressor motor, suction line air pipe etc., complete complying with standard specification. (Pg.No:31)
-
-
-
... More
25mm dia uPVC Pipe
12
-
-
... More
Supplying, laying and jointing uPVC Pipes of the following dia of approved quality and best variety above ground level including fixing of uPVC Specials but excluding cost of such specials and cutting and threading of pipes but including fixing to the wall with necessary clamps and screws, Teak wood plugs making holes in the wall (or) drilling holes in the roof and making good of the disturbed portion to the oriuPVCnal condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges. etc., complete complying with standard specification.(Pg.No:32)
-
-
-
... More
25mm dia uPVC Pipe
133
-
-
... More
20mm dia uPVC Pipe
65
-
-
... More
Supplying and fixing in position the following uPVC Specials of heavy type and approved quality and good variety excluding fixing charges but including necessary cutting and threading of uPVC pipes, jointing the uPVC specials and painting with two coats with good variety and best quality synthetic enamel paint over a coat of red oxide primer and jointing the specials with pipe line using shellac etc., complete complying with standard specification. (The uPVC specials should be got approved by the Executive EnuPVCneer concerned before use on works.)
-
-
-
... More
25mm uPVC Coupling
21
-
-
... More
25mm uPVC Elbow
24
-
-
... More
25mm uPVC Union
8
-
-
... More
25mm uPVC TEE
12
-
-
... More
25mm uPVC Bend
7
-
-
... More
25mm x 20mm uPVC Reducer
20
-
-
... More
25mm x 20mm uPVC Tee
9
-
-
... More
20mm uPVC Coupling
4
-
-
... More
20mm uPVC Union
11
-
-
... More
20mm uPVC Elbow
17
-
-
... More
15mm Hex Nipple
27
-
-
... More
20mm x 15mm uPVC Reducer
9
-
-
... More
Supplying and fixing in position first quality and approved variety of Gun Metal Gate Valvewith BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.
-
-
-
... More
25mm dia GI Gate Valve
5
-
-
... More
Supplying and fixing in position first quality and approved variety of Ball Valve Handle with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements).
-
-
-
... More
25 mm dia Ball Valve Handle
4
-
-
... More
Supplying and fixing in position 15mm dia Brass CP screw down tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)(Pg.No:17,18)
31
-
-
... More
Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped riuPVCd PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also uPVCving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to oriuPVCnal condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Executive EnuPVCner before use on works) (Pg.No:14)
3
-
-
... More
Supplying and fixing in position best Indian make Wash hand basin of size 550mm X 400mm and approved brand and quality with a pair of C.I. Brackets fixed to wall with necessary teakwood plugs and brass screws one No. of 15mm C.P. Pillar tap 32mm C.P. Waste coupling, rubber plug and chain, 32mm G. I. Union, 32mmG. I. Waste pipe 15mm dia G. M. Wheel valve 15mm brass nipple and nylon connection including cost of white lead TW Plugs clamps, rubber washer, etc., complete (The wash hand basin should be got approved from the Executive EnuPVCneer before use on works).(Pg.No:14)
2
-
-
... More
Supplying and fixing in position best Indian make white glazed earthenware Oriya type Indian water closet 580mmx440mm of approved brand and best quality with P or S trap with sand cushion and after conducting necessary leakage test the portion should be filled up with brick jelly lime concrete 1:2:5 (One lime two sand and five brick jelly using 40mm size broken brick jelly) for 100mm thick encasing the water closet and top left rough to receive the floor finish and giving necessary connection to P.V.C. soil stack including dismantling masonry RCC works wherever necessary and redoing the same to the original condition without any leakage etc., complete complying with standard specification ( The water closet ‘P’ or ‘S’ trap are to be got approved from the Executive Engineer before use on work). Holes should be left in walls for taking out the pipe from ‘P’ or ‘S’ trap and these should later be plugged with concrete. (Pg.No:13)
6
-
-
... More
Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)(Pg.No:17)
1
-
-
... More
Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and uPVCving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to oriuPVCnal condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive EnuPVCneer before use on works).
-
-
-
... More
a. 110mm dia door bend
10
-
-
... More
b. 110mm dia plain bend
10
-
-
... More
c. 100mm dia Tee
1
-
-
... More
b.75mm dia Pvc door bend
1
-
-
... More
d. 75mm dia Pvc plain bend
1
-
-
... More
Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works).
21
-
-
... More
Supplying and fixing in position CP shower rose with CP stop cock arrangement of size 15mm dia inlet and 100mm outlet to the pipe line with necessary cutting, threading and jointing using shellac etc., complete complying with standard specification and as directed by the departmental officers (The CP shower rose should be got approved by the Executive Engineer before use on works).(Pg.No:17)
2
-
-
... More
.Supplying and fixing best approved best quality brass CP soap tray of size 150 x 150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works).(Pg.No:18)
2
-
-
... More
Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level (Pg.No:16)
-
-
-
... More
a. 110 mm PVC Soil Pipe
4
-
-
... More
b. 75 mm PVC Soil Pipe
1
-
-
... More
Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works). - 110 mm PVC Tee (Pg.No:37)
1
-
-
... More
Post Tensioning Work: (SOR P.No:- 76 S.No:- M0712)
Design and execution of post tensioning work, including decoiling, the strands, cutting to the required lengths, supplying, laying of HT strands sheathing (GI corrugated ducts 0.3mm thick) jointing with couplers and inserting the strands, profiling, fixing liveend anchorages, including supply of stressing anchorages, suitable for 5-5 & 5-4 tendons, grout vents, making dead end anchorages, including flowering the strands, fixing tendon support bars, supervising the fixing of antibursting reinforcement, stressing the cables, end trimming, grouting the cables, with cement slurry, mixed with admixtures with required tools, plants, and machineries, and consumables etc. (Shuttering, concreting & reinforcement steel shall be paid under respective items) at all heights including all leads, lifts, coordination, with the post- tensioning agency, preparation of drawings, obtaining approval from the Employer / Architect etc. Rate to include providing water, power, cement and admixture for grouting, packing of sheathing and anchorages blockings, filling of recess pockets after stressing using grouts (cement slurry mixed with approved admixtures) including providing access to post tensioning at all heights including all leads, lifts etc., all complete and as approved and as directed by the Employer Architect but excluding shuttering, concreting & reinforcement steel which shall be payable under respective items separately.
1.3
-
-
... More
Drilling of Borewells anywhere in Tamilnadu including transportation from one place to another with in Tamilnadu in alluvial soil sedimentary strata of clay and sand stone shale pebbles boulders etc. By first taking a pilot bore of 140 mm/150mm dia and then enlarging to required dia direct or reverse rotary mud circulation method using rotary rigs, fuel, labour and drilling bentonite and water required for drilling at site ( Site will be shown by the TWAD Board Officers) including construction of mud pit.
-
-
-
... More
a) Drilling 0 to 100 M
100
-
-
... More
b) Reaming from 140/150mm dia to 300mm dia bore as directed by dept. officers. 0 to 100 M
100
-
-
... More
Supply and delivery of vertical wet type submersible pumpset 3 HP capable of discharging with control panel with necessary pipes and fitting and labour charges etc.complete.
-
-
-
... More
3 PAHSE 3 HP ISI make 14 stage submersible pumpset 75x75 with Excise duty and taxes etc.without panel board
1
-
-
... More
160mm PVC end cap
1
-
-
... More
GM white
1
-
-
... More
500ML Solvent cement
2
-
-
... More
Bolt and Nut
10
-
-
... More
50mm PVC Coupling
20
-
-
... More
50mm PVC Bend
7
-
-
... More
50mm PVC Elbow
7
-
-
... More
6 Sqmm 3 core flat Cable
150
-
-
... More
PVC Tap Roll (Empier tape)
10
-
-
... More
Nool Kandy
7
-
-
... More
Gusket shellac
7
-
-
... More
Bore Plate
1
-
-
... More
50mm class CPVC Pipe
100
-
-
... More
150mm CM Casing Medium depth PVC pipe.
60
-
-
... More
3 Phase panel board - D.O.L with two level guard and auto start Rate + 4% vat
1
-
-
... More
Slotter charge
60
-
-
... More
Labour charges for inserting PVC casing pipe with slots and without slots in the drilled holes including jointing the pipes with PVC couples with cement poste etc. complete.
60
-
-
... More
Charges for developing the borewells with air compressor of 600 ctm capacity (minimum 8 hours) including transporation, labour and fuel charges for compressor as directed by dept officer etc.complete.
8
-
-
... More
Supplying laying and jointing PVC pipe of approved quality and best variety conforming to ISS and with ISI mark of 50mm including cutting threading and fixing PVC specials and including earth work exvcavation for 1M depth below ground level etc complete as per standard specifications
120
-
-
... More
Wiring with 2 x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3 mm thick hylum sheet cover with TW switch box and 5 A F.T switch with continuous earth wire connection of 14SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed Light / Fan point (for electronic regulator) (DATA 1)
80
-
-
... More
Wiring with 2 x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3 mm thick hylum sheet cover with TW switch box and 5 A F.T switch and making good of the concealed portion with suitable colour for PVC concealed Light / Fan point (for electronic regulator) (5 points per Coil) (DATA 2)
91
-
-
... More
Wiring with 2 x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3 mm thick hylum sheet cover with TW switch box and 5 A F.T switch and making good of the concealed portion with suitable colour for concealed PVC Light (6 points per coil) for rooms like bath, toilet & Pumproom etc.,) (DATA 3)
4
-
-
... More
Wiring with 3 x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3 mm thick hylum sheet covered TW switch box and 5 A F.T switch (Two way) and making good of the concealed portion with suitable colour for concealed staircase light point (DATA 4)
6
-
-
... More
Supply and fixing of single box type 4'20 W LED fitting with TW round blocks on wall or celling with PVC unsheathed Copper leads from terminals to the fitting. (DATA 5)
22
-
-
... More
Supply and fixing of single box type 4'40 W LED with conduit pipe suspension from the celling with PVC unsheathed Copper leads from terminals to the fitting. (DATA 6)
32
-
-
... More
Supply and fixing of ORBIT LED SURFACE CEILING LIGHT (SQUARE) 12W FITTING on Celling with connetion . (SD 529)
9
-
-
... More
Supply and fixing of LED WT Bulk head fitting PRBH - 15W with connection. (DATA 8)
2
-
-
... More
Supply and fixing of 2x2 LED Flat Pannel Fitting with TW round blocks on wall or ceillling with PVC unsheathed Copper leadss from terminals to the fitting (SD 526)
11
-
-
... More
Supply and fixing of Havells LED Low Bay 50W Fitting with MS Clamp Set with Bolt and Nut and to be suspended with SS Chain 32 mm width with End Hooks with PVC unsheathead Copper leads from terminals to the fitting. (DATA 10)
32
-
-
... More
Supply and fixing of Havells JETAALBA - FLOOD LIGHT -70W LED Fitting with Necessary Wall Grouting clamps with Fixing bolts on ceilling with PVC unsheathed Copper leads from terminals to the fitting. (DATA 11)
4
-
-
... More
Supply and fixing of street light fitting with 32mm dia GI pipe (Class 'B') with 1 No. 32mm GI bend complete on the existing post wall with PVC unsheathed copper leads MS clamps and aluminium painting (SD 532) Higher End.
13
-
-
... More
Supply and fixing of 1200 mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator, with 300 mm down rod on existing clamp (SD - 110)
4
-
-
... More
Supply and fixing of 1200 mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator, with 1 metre down rod on existing clamp (SD - 107)
2
-
-
... More
Supply and fixing of 1400 mm (56") sweep AC ceiling fan complete with stepped electronic 300W regulator, with 1 metre down rod on existing clamp (SD - 109)
42
-
-
... More
Supply and fixing of 300 mm (12") sweep light duty AC exhaust fan complete without provision of hole in the wall (SD - 115)
2
-
-
... More
Supply and fixing of 375 mm (15") sweep heavy duty AC exhaust fan complete without provision of hole in the wall (DATA 13)
6
-
-
... More
Supply and fixing of louvers shutters arrangements for 300 mm (12") sweep (light duty) AC exhaust fan. (SD - 121)
2
-
-
... More
Supply and fixing of louvers shutters arrangements for 375 mm (15") sweep (light duty) AC exhaust fan. ( SD - 121)
6
-
-
... More
Supply and fixing of 450MM 18" Almonard Walla Fan on wall with connection. (DATA 14)
13
-
-
... More
Supply and fixing of 1 no. 2 Amps Module (3 Pin and 2 Pin) combined flush type wall socket with 6A one module switch concealed in suitable surface Module GI Box in flush with wall and concealed with Module Cover Plate (SD - 464)
50
-
-
... More
Supply and fixing of 5A / 15A 3 Pin Two Module wall socket in 15A Module switch concealed in suitable MS Box in flush with wall and covered with Module Cover Plate (SD - 488)
9
-
-
... More
Supply and Fixing of 25A MCB protected Socket in MS Enclosure Conceled in wall with connection (DATA 15)
4
-
-
... More
Supply and fixing of 3 Nos. 6 Amps (Two Module 5 Pin) switch socket with 3 no. 6A Module control switches concealed in suitable Module switch Box in flush with wall and covered with Module Cover Plate (Plastic) (for computer plug socket) (SD - 476)
8
-
-
... More
Supply and run of 2 of 1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall and ceilling with continious earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour (SD - 55)
600
-
-
... More
Supply and run of 2 of 4 sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall and ceilling with continious earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour (SD - 57)
300
-
-
... More
Supply and run of 4 of 10 sqmm (140/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigidpipe concealed in wall and ceiling with PVC accessoires in flush with wall and ceilling with continious earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour (DATA 16)
100
-
-
... More
Supply and run of 4 of 16 sqmm (101/0.45) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigidpipe concealed in wall and ceiling with PVC accessoires in flush with wall and ceilling with continious earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour (DATA 17)
25
-
-
... More
Supply and laying of 4 x 10 sqmm PVC LTUG aluminium armounred cable in a trench to be excavated at a depth of 0.75 meter putting 0.15 meter layer of sand and covering the cable completly with bricks and sand and refilling the earth to make good. (SD - 202)
20
-
-
... More
Supply and laying of 4 x 10 sqmm PVC LTUG aluminium armounred cableon post or on wall with MS clamps (SD - 220)
10
-
-
... More
Supply and fixing of brass cable gland for 4 x 10 sq.mm PVC LTUG aluminium aromoured cable with earth connection (SD - 185)
2
-
-
... More
Supply and fixing of 32A TPN metal clad switch on suitable angle iron frame work with MS cable entry boxes with PWD earthing.(Motor) (SD -163)
1
-
-
... More
Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure Distribution board with 1No 32 Amps DPMCB as incoming and 10 Nos 6 Amps to 32 Amps SPMCB outgoing in flush WNI well with earth connection only. The MCB DB and MCB's should be with ISI mark (Like Legrand/Hager make). (SD 615)
6
-
-
... More
Supply and fixing of vertical type 4 way triple pole neutral MCB distribution board with Metal/Acrylic Door cover with IP42 Protection, with 63A 30mA Snsitivity RCCB and 1 No TP MCB and 9 nos 6A to 32A SP MCB as Outgoing on wall with angle iron frame work with earth connection only. The MCB DB and MCB's should be with ISI mark (like legrand make) (DATA 19)
2
-
-
... More
Supply and fixing of vertical type 4 way triple pole neutral MCB distribution board with Metal/Acrylic Door cover with IP42 Protection, with 100 A 34 Pole MCB isolater as incoming and 4 Nos 63A TP MCB as outgoing on wall with Angle iron frame work with earth connection only. The MCB DB and MCB's should be with ISI mark (like legrand make) (DATA 20)
1
-
-
... More
Supply and fixing of vertical type 4 way triple pole neutral MCB distribution board with Metal/Acrylic Door cover with IP42 Protection, with 63 A 4 Pole MCB isolater as incoming with and 3 Nos 32A TP MCB and 3 Nos 6 A to 32A SP MCB as outgoing on wall with Angle iron frame work with earth connection only. The MCB DB and MCB's should be with ISI mark ( Mortor Load ) (DATA 21)
1
-
-
... More
Supply and fixing of Havells 100A on -Load Change over switch IHCNFE0100 with enclosure and one No Havells 100A Switch disconnector Fuse panel mounted cubical Type IHKDTW4100 on suitable angle iron frame work with cable Entry boxes with earth connection. (DATA 22)
1
-
-
... More
Supply and laying of 3 1/2 x50sqmm PVC LTUG aluminium armounred cable in a trench to be excavated at a depth of 0.75 meter putting 0.15 meter layer of sand and covering the cable completly with bricks and sand and refilling the earth to make good. (SD - 206)
40
-
-
... More
Supply and clamping of 31/2 x 50 sq.mm PVC LTUG armoured cable on post or wall with MS clamps (SD - 224)
15
-
-
... More
Supply and fixing of 31/2 x 50 sq.mm PVC LTUG armoured cable with earth connection. (SD - 188)
4
-
-
... More
Supply and clamping of 31/2 x 50 sq.mm PVC LTUG armoured cable through 65mm GI pipe on post or on wall with MS clamps. (DATA 23)
5
-
-
... More
Supply and providing cable end terminaton of 3-1/2 x 50 sq.mm PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete (SD - 237)
4
-
-
... More
Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry . (SD - 233)
4
-
-
... More
Supply and fixing of 3 Phase 100A aerial fuse unit for 3 Nos 100A fuse units (500V) on suitable MS sheet covered with6mm thick hylem sheet on suitable angle iron work the tapping pole with necessary clamps. (DATA 24)
1
-
-
... More
Supply and run 25mm x 3mm tinned copper flat with necessary clamps/supports on wall / floor/ ground for earth connection. (SD - 76)
30
-
-
... More
Supply and fixing of 3 Compartment Pannel (made up of 16 SWG Sheet) with Lock and keys with view Glass arrangements for obtaining the EB supply having Bus bar Chamber with 25mm x 3mm copper flat for in/out Cable connection and 3 Nos 100A Fuse unit with 1 No 100A Netural link with the provision for fixing the EB meter and cable entry boxes with necessary connection. (DATA 25)
1
-
-
... More
Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure Distribution board with 1No 32 Amps DP MCB Isolator as incoming and 4 Nos 6 Amps to 32 Amps SPMCBs outgoing in flush wall well work with earth connection only. The MCB DB and MCB's should be with ISI mark (Like Legrand/Hager make) (Street light control). (SD 601)
1
-
-
... More
Supply and run of 4 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 14 SWG TC wire and making good of the concealed portion with suitable colour (SD - 61)
30
-
-
... More
Supply and fixing of 6 metre length single Bracket Pole with Base plate (250x250x6mm) 76.10mm OD x 3.65mm thick x 6000mm Length with concreting and construction of masonry pedestal with MS box of 30cm x 20cm x 10cm with angle iron frame work with door and lock and key arrangements with supply and fixing 48W LED street light fitting with LED and with supply and fixing of 1 No. 16A fuse unit (500V) and 5A SP switch inside the MS Box with PVC unsheathed leads and painting of suitable colour. (SD 543)
12
-
-
... More
Supply and fixing of brass cable gland for 2 x 10 sq.mm PVC LTUG aluminium armoured cable with earth connection (SD - 182)
26
-
-
... More
Supply and laying of 2 x 10 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of M.Sand and covering the cable completely with bricks and M.Sand and refilling the earth to make good. (SD - 198)
250
-
-
... More
Supply and clamping of 2 x 10 sq.mm PVC LTUG armoured cable on post or on wall with MS clamps. (SD - 216)
50
-
-
... More
Supply and clamping of 2 x 10 sq.mm PVC LTUG armoured cable through suitable 32 mm GI pipe on post or on wall with MS clamps. (DATA 28)
50
-
-
... More
Supply, errection,testing and commissioning of 45 KVA Diesel Silent Generator set, 0.8 PF 3 ph, 415V, 50 Hz as detailed below. M2069
1
-
-
... More
A.Engine: Water cooled Diesel Engine type suitable for generating application with a shaft output of uitable capacity of 60 BHP at 1500 RPM under NTP conditions. As per the BSS 5414 / ISO 3046. The Engine shall comprise the following standard fittings (Kirloskar / Cummins / Equivalent)
-
-
-
... More
B. Alternator: Capacity for 45 KVA / 36K, 0.8 PF self excited, self regulated degin to run at 1500 RPM under NTP condition confirming to BS 5000 / IS 13364 (part II) 1992 to be coupled directly to the Diesel Engine and Test Certificate. (Kirloskar / Cummins / Equivalent)
-
-
-
... More
C.Battery: 1 No 12V 88/100 AH Battery Make (EXIDE / AMCO / AMARON)
-
-
-
... More
D. Acoustic Enclosure : Supply of acoustic Enclosure for 45 KVA Diesel Generator Set. The Acoustic enclosure is made of 1.6 / 2 mm thick CRCA sheets in munsel Green shade and a Structural Sheet metal base frame Painted in Black. The walls of the enclosure are insulated with fire retardant foam so as to comply with the 75 DBA at mtr sound levels specified by Ministry of enforcement.
-
-
-
... More
The enclosure should be complete with 1. Arrangement for power cable for connection. 2. Residential exhaust silencer, with flexible base arrangements. 3. Suction louvers. 4. Discharge Louvers. 5. Open able and lockable doors on both sides with air tight Neoprene rubber gasket. 6. Interior lighting arrangements. 7. Lifting arrangements.
-
-
-
... More
E. Erection, Testing and Commissioning of the genset comprising the following: 1. Providing suitable concrete foundation with plain cement concrete 1:2:4 with sand cushion all around the foundation suitable for mould engine and alternator with acoustic enclosure. 2. Erection of generator set complete with acoustic enclosure, fuel tank, engine control panel, standard control panel, base frame complete on the above foundation and lifting arrangements. 3. First charging of lub oil and first charging of Battery.
-
-
-
... More
Supply and installation of exhaust piping of sufficient length with suitable MS pipes so as to extened outside the generator room with necessary thermal insulation. (MR)
3
-
-
... More
Supply of lubricating oil and first charging of starting battery and supply of 80lts diesel to run the genset for minimum of 8 hours. (MR) Installation and Transporting Charges
1
-
-
... More
Supply, erection,testing and commissioning of 1.5 Ton (4500 K.Cal/Hr) ABS Plastic split type Air conditioner confirming to is : 1391(part 2) 1992 Amdt No.1 to 2 fitted with Rotory compressor operating Refrigerant R.22/ Non CFC suitable for wall mounting for operating on 230 voltrs, 50 HZ single phase AC supply with star rating of 3 as per BEE specification and capable of performing the functions of 1) Cooling 2) De humidifying 3) Air circulating 4) filtering.
2
-
-
... More
The installation works for the above split type AC units includes the followings. Mounting/fitting in door and out door units at the respective locations.
-
-
-
... More
1. Laying Refrigerant pipe line of required length connecting both units after drilling hole/holes in the wall if required. Thickness of copper tubing shall not be less than 0.7mm. 2. Insulating the suction pipe with expanded polyethylene foam 5 mm tubing. 3. Laying 15mm dia Flexible PVC drain pipe to throw out. The condensate water being formed within Indoor unit. 4. Leakage testing the entire system with outdoor unit stand. 5. Charging Refrigerant gas in the unit. 6. Suitable electric wiring to be provided with 2.5 sqmm. PVC insulated copper wire between indoor and out door units up to 6 meters length and up to Switch within 3 meters of location of in door Unit. (Carrier/voltas) (DGS & D Rates)
-
-
-
... More
Renewal by supply and installation of 4.0 KVA Electronic Automatic voltage stabilizer V-Guard Make with input voltage Range of 170 volt to 270 volt and output voltage range 200 volts to 240 volts with High and low voltage cut off and 3 minutes time delay relay with demonstration (MR)
2
-
-
... More
Supply and fixing 1000w automatic electric water heater of 25 liters capacity suitable for 230V 50 c/s AC supply on suitable MS clamps with 3 core flx wire, but without plumbing work. (SD - 103)
2
-
-
... More
Supply and fixing of 5A/15A m pin compined flush type wall socket with 15A flush type switch concealed in suitable MS box in flush with wall and covered with 3 mm thick hylem sheet (SD 138)
2
-
-
... More
GST 18%
0.18
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%