Hindu Religious And Charitable Endowments Tender

Dismantling clearing away of pressed tiles & weathering course and depositing the debries in the place as shown by the departmental officers.

Weathering course concrete with broken jelly 20mm size and pure unslaked lime over RCC roof slab, the proportion being 32:12.5 for required depth for giving required slope and thickness of roof, well beaten with wooden beater using lime Jaggery water constantly wetted etc, complete complying with standard specifications.

Finishing the top of roof with one course of machine pressed tiles 23cm x 23cm x 20mm of approved quality laid in Lime mortar 1:2, 12mm thick mixed with water proofing compound 2% by weight of lime used pointing with same mortar with red oxide etc, complete with standard specifications.

Labour charge for removing the pavukal bothiyal, thoon, Uthiram wall stones, flooring, numbering, stacking and without any hinderence to stones including removing all debries from the site of work etc all complete with standard specification.

Supplying of new cut stone for pavukkal and all other stone works such as Uthiram, bothiyalm wall stones of good quality and standard excluding labour charges but including cost and conveyance loading and unloading etc, complete with standard specification

Size 1' x 1' x 5'

Size 1-1/2' x 1-1/4' x 5' to 10'

Labour charges for New stone fixing: chitranvanam, padma Jagati, Adhistanam, Kandam, Pattiyal, Jagati, Kumudagam, Aswapadam, Sthamaba, Sthambam, Kalasam, Thadi, Kudam, Palagai, Pillars, Veerakandam, bodhiyal, uthiram, Kambu, Eludham, Kabothagam, Viyalam, Koodu, Ull vari, pavukkal. Thun, Nilaikal, bodhiyal thani, uthiram, including all labour charges, hire charges, for tools and plants for dressing, charcoal, scaffolding, handling, hoisting and fixing in position including pointing Lime mortar 1:1.5 etc, as directed by the departmental officers.

Pillars

Bothiyal

Uthiram

Pavukkal

Yalam

Kodungai

Upapeedam

Labour charges for old stone fixing: chitranvanam, padma Jagati, Adhistanam, Kandam, Pattiyal, Jagati, Kumudagam, Aswapadam, Sthamaba, Sthambam, Kalasam, Thadi, Kudam, Palagai, Veerakandam, bodhiyal, uthiram, Kambu, Eludham, Kabothagam, Viyalam, Koodu, Ull vari, pavukkal. Thun, Nilaikal, Pillar, bodhiyal thani, uthiram, including all labour charges, hire charges, for tools and plants for dressing, charcoal, scaffolding, handling, hoisting and fixing in position including pointing Lime mortar 1:1.5 etc, as directed by the departmental officers.

Removal of old cutstone flooring without hinderance as any damages to stones, numbering and stacking and clearing the debries at site of work as directed by the departmental officers.

Earth work excavation for foundation in all classes of soils and sub soils and todepth as may be directed except in hard rock, requiring blasting, including initial leads and lifts and re-filling the sides of foundation, with excavated earth in 150mm layers well watered rammed and consolidated, including depositing surplus earth clearing and levelling the site, shoring shuttering baling out water wherever necessary etc., complete complying with standard specification.

Dismantling clearing away plain cement concrete and depositing the debries in the place as shown by the departmental officers.

Supplying and filling in foundation, basement, with filling M-sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification

Flooring with cut stone slab of size 600mmX600mm and other sizes suitable for site requirement not less than 100mm thick with machine cut edges and top surface dressed as directed by the departmental officers including cost and conveyance of materials to site and labour charges for paving and Pointing With Lime Mortor1:1.5 etc complete.

New cut stone flooring (single line dressing)

Old cut stone flooring single line dressing using available cut stone slab

Scrapping the existing paint thoroughly and repainting two coat with approved water based exterior emulsion over the cement plastered wall surface, ceiling and other new surface over priming coat including clearing preparing the surface curing in all floors including brushes etc., complete as per standard specification.

Painting with multicolour (Panchavarnam) good water based exterior emulsion paints complete for the Vimanams/Gopurams, including cost and conveyance of all materials, labour charges including Artist painter, working in heights, lifting of materials, cost of brushes etc, complete which including all extra for foldings 100 sft, superficial area.

Upto 15' feet ht

Upto 25'feet ht

Scaffolding charges for Vimanams and gopurams with casurina posts coconut or plam trees wherever necessary for main, form work and providing ladder arrangements, country wood plank for working, inspection etc, complete hire charges only for erection, maintainance and removing the same on completion of the work.

Upto 15' feet ht

Upto 25' feet ht

Upto 50' feet ht

Clean removal of old paint from the surface of wooden door and Painting old wood work with two coats of synthetic enamel paint of approved quality and color over one coat of primer in all floors include cost of all materials, brushes scaffolding charges etc, complete complying with standard specifications.

Painting old iron works such as gate, steel doors windows ventilators with two coats of approved quality and color of synthetic enamel paint over the existing zinc chromate yellow primer in all floor etc, complete complying with standard specifications.

Dismantling clearing away brick Masonry in Cement Mortar walls under 3 m high and depositing the debries in the place as shown by the departmental officers.

Plain Cement concrete 1:5:10 (one of cement five of sand and ten of aggregate) using 40mm gauge hard granite broken stone jelly for foundation and basement including cost and conveyance of all materials labour for mixing,l aying, compacting, curing, dewatering, shuttering, wherever necessary including curing etc.,complete complying with standard specification.

Brick work in cement mortar 1:5 Third class country bricks kiln burnt of size 8 3/4 x 4 1/4 x 2 3/4 including curing, etc, complete complying with standard specification. For Beedam

Plastering with Cement Mortar 1:5, 12mm thick including the cost and conveyance of all materials, labour charges, curing, finishing etc, complete complying with standard specifications.

Providing Vargapoochu over the corewalls of Vimanams / Gopurams, with Lime Mortor 1:1.5 complete including shapping the mukhapathram, mahanasi, Koodu all ornamentals works to proper shape by embdding broken bricks of shaped/chiselled bricks, rough-plastering with Lime mortar 1:1.5 and finishing with final ornamental plastering and nayam theervani including cost and conveyance of all materials, labour therefore, lifting of materials, all working in heights, curing with water etc, complete inculding all axtra for folding and inculuding clearing from the vimanams/gopurams 100sft superficial area.

Painting two coats of newly plastered wall surface with ready mixed exterior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Supplying and fixing teak wood temple type door using best seasoned good quality teak wood including wrought and pur up and including all materials, labour charges for manufacturing and fixing in position including all furniture fittings and making necessary grows in door and frames for housing the door etc complete with standard specifications. Below 7'

Painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Best tiled roofing with best quality A-class manglore tiles with teak wood reeper 50 x 25mm with lime mortar border in lime mortar 1:1.5 including labour charges for fitting tiles fixing and tiling in position using nails and screws as directed by the departmental officers.

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29M height for plane surfaces as detailed below in all floors with all cross bracings using mild steel sheets of size 90 x 60cm and 10BG stiffened with welded mild steel angle of size 25mm x 25mm x 3mm for boarding laid over silver oak koists of size 10cm x 6.50 cm spaced at above 90 cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at not more than 75cm centre to centre etc. complete complying with the standard specification. (Payment for centering shall be given after the concrete is laid) For roof slab

Random Rubble masonry in Lime mortar 1:2, using selected stones and bond stones in foundation and basement including dewatering wherever necessary proper setting, curing, with simultaneous pointing etc complying with standard specification.

Refilling with excavated earth other than crushed stone sand with an initial lead and lift and depositing the earth as shown by the departmental officers in layers of not more than 15cm thick well rammed, watered and consolidated etc. complete complying with standard specification.

Providing and laying in position, Standardised Concrete Mix M-20 Grade using M-Sand in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/mᶾ and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 Cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m.) 5156 kg of 10-12mm machine crushed stone jelly and with about (4.79 Cu.m.) 7670 kg. of M-sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No's separate payment will be made by the Department for the excess usage of materials. (For plinth beam)

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29M height for plane surfaces as detailed below in all floors with all cross bracings using mild steel sheets of size 90 x 60cm and 10BG stiffened with welded mild steel angle of size 25mm x 25mm x 3mm for boarding laid over silver oak koists of size 10cm x 6.50 cm spaced at above 90 cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at not more than 75cm centre to centre etc. complete complying with the standard specification. (Payment for centering shall be given after the concrete is laid) For grade beam

Supplying, fabricating and placing in position mild steel / ribbed to steel grills for all RCC works as per design given including cost of steel and G.I. Binding wire in all floors etc. Complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Brick masonry Lime Mortar1:2 using Stock bricks including all varivargams, moulds, sthambams, mukapathrams, koodu, nasi and all ornamental brick work complete, all pancharams, agarais, karnakoodus, etc., forming core walls of Rajagopuram/ Vimanams complete including cost and conveyance of all materials including cement, all the labour charges including marking pathies shaping of the bricks, lifting of all the materials to required heights, curing and all extra for working in heights etc., complete vimanam / gopuram as directed by the departmental Officers.

ELECTRICAL WORKS Supply and run of 35mm x 20mm powder coated duct with door arrangements.

Supply and run of MS flat for clamps of size 2' x 1' on pillar with suitable Bolt / nuts and painting of suitable colour.

Supply and run of 3 x 2.5 sqmm Copper wire in suitable PVC pipe in the exsiting duct.

Supply and run of 3 x 1.5 sqmm Copper wire in suitable PVC pipe in the exsiting duct.

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (6 points per coil)

Supply and fixing of 4’20 W LED Fitting with LED on wall or ceiling with PVC unsheathed copper leads from terminals to the fittings.

Supply and fixing of Fancy glass Shade and 7W/9W LED for BH point.

Supply and fixing of 400mm 16" Wall Fan (light duty) with Pillar Clamp 1½ x ¼ MS flat with bolt and nuts for fixing the Fan on pillar with necessary connection.

Supply and fixing of 18W LED Round Surface type fitting with necessary accessories and electrical connections complete. (Make: Orbit / Philips / Eql)

Supply and run of 5 core 2.5 sq.mm flexible copper wire with necessary accessories with electrical connections complete. (for Gopuram focus lights)

Supply and fixing of 2 nos.6A two module 5 pin socket , 2 nos. 6A one module switch on suitable module surface mounting Box (Plastic) with module cover plate (plastic) on wall with connections. Higher End (Set plug)

Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch on suitable module surface mounting Box (Plastic) with module cover plate (plastic) on wall with connections. Higher End

Supply and fixing of 375 mm (15") sweep (Heavy duty) AC Exhaust fan complete without provision.

Supply and fixing of louvers shutters arrangements for 375mm (15") sweep (light duty) AC exhaust fan

Supply and fixing of 30W LED focus fitting complete on suitable MS angle with suitable MS clamp. (For Urchavar and Guru Bhagavan sannadhi outer)

Supply and fixing of 80W LED Focus / Flood light fitting complete suspended from ceiling by chain with 1" dia GI pipe supports between the walls with suitable MS clamps, painting and electrical connections complete.

Supply and Laying of 3½ x 50 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and clamping of 3½ x 50 sq.mm PVC LTUG armoured Alu cable on post or on wall with MS Clamps.

Supply and fixing of brass cable gland for 3½ x 50 sqmm PVC armoured LTUG cable with earth connection.

Supply and providing cable end termination of 3½ x 50 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and Laying of 3½ x 25 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and clamping of 3½ x 25 sq.mm PVC LTUG armoured Alu cable on post or on wall with MS Clamps.

Supply and fixing of brass cable gland for 3½ x 25 sqmm PVC armoured LTUG cable with earth connection.

Supply and providing cable end termination of 3½ x 25 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and Laying of 4 x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and clamping of 4 x 16 sq.mm PVC LTUG armoured Alu cable in on post or on wall with MS Clamps.

Supply and clamping of 4 x 10 sq.mm PVC LTUG armoured Alu cable in on post or on wall with MS Clamps.

Supply and fixing of brass cable gland for 4 x 16 / 4 x 10 sqmm PVC armoured LTUG cable with earth connection.

Supply and laying of 2 x 6 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

Supply and clamping of 2 x 6 sq.mm PVC LTUG armoured Alu cable in on post or on wall with MS Clamps.

Supply and fixing of brass cable gland for 2 x 6 sqmm PVC armoured LTUG cable with earth connection.

Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall with continuous earth wire connection of 4 Sqmm Copper Wire with painting of suitable colour

Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 12 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End

Supply and fixing of 8 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 100A 4P isolator switch as incoming, 1 no. 63A TP MCB, 2 nos. 32A TP MCB and 15 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End

Supply and fixing of 1 x 48W LED street light fitting complete with 1 mtr 50 mm dia GI pipe (Class'B') with 1 No. 32 mm GI bend pipe complete with concreting and masonary work for fixing the sintex box with PVC unsheathed copper leads in flexible green hose, MS clarnps and aluminium painting

Supply and fixing of 450mm 18" Wall Fan on suitable special type clamps with bolt nuts & nitrile rubber over the stone surface with neccesary arrangements and testing complete.

Supply and fixing of 100A (500V) three phase meter box fabricated with 16 SWG CRCA Sheet comprising of with 3 nos. of 100A fuse units, 1 no. 100A TPN switch with provision for fixing TNEB meter with inter connections and with required accessories on wall complete.

Supply, erection, commissioning and testing of 40 KVA Diesel generator with acoustic arrangements in accordance with CPCB norms, water / coolant oil cooled type engine with 48 BHP for 40 KVA generator at 1500 rpm under NTP conditions with following specifications. The engine should have turbo charged, should be provided with air cleaner, base frame, crank case, lubricating oil, fan and fan drive, fuel and oil filters, flexible fittings, exhaust governor, hydro-mechanical gauges for fuel pressure and oil pressure, tachometer, digital water temperature gauge, charging arms, muffler, exhaust pump for fuel priming, fuel transfer, jacket with radiator engine oil, safety set ups with engine shutdown system for LLOP including the set of tools, spares as supplied by the manufacturer along with the Engine. The alternator should have brushless self-excited Y connected, self-regulated of continuous rating, developing an output of 32KW at 0.8 power factor lagging, 415 V, 3 phase, 50 Hz at 1500 rpm with a voltage regulation of ±1 % under steady state condition with over speed capacity of 10% for 5 minutes withstanding capacity with class H insulation, ingression protection of IP23 with topicalization. The alternator is to be designed, built & tested to IS, BS, IEC or any other equivalent Indian or International Standards.\The engine should be provided with suitable electrical starting system including, suitable radiator arrangements with suitable fully charged new batteries and with other connecting accessories. microprocessor based genset controllers display and displayed at phase voltage & currents, Frequency, reverse Power, Genset KVA, KW, KWh, KVAr, power factor, canopy temperature, lube oil pressure, engine temperature, RPM, run hours, number of starts, fuel level, auto / manual stop, battery charge condition. The fuel tank should be fabricated with 14 SWG CRCA MS sheet steel inbuilt removable type sheet metal fuel tank with fuel gauge drain plug and fuel connections, fuel level indicator and with a capacity of not less than 75 Ltrs. Provisions are to be made to filter the sediments, water in the fuel at rear side and provision of vent at top to release the air pressure in the tank. The tank should be painted with noncorrosive and non-flammable paint. The fuel tank should be filled with a minimum level of fuel for test running on full load. (Make: Ashok Leyland / eql)

Supply and fixing of 100A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with earth connection only.

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection

Supply and fixing of 20A DP plug and socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For AC Plug)

Supply and fixing of 2 KVA 24V online sine wave inverter (Microtek / eql) with 2 nos. of fully charged 12V, 150Ah tubular battery (Exide / eql) with necessary accessories, electrical connections complete as directed by the departmental officers.

Supply and fixing of 3 x 150W LED street light fitting complete with 19 Metre Length Double Bracket Pole with Base Plate (300 x 300 x 6mm) (SR pg no. 149, item no 1-n) 114.30mm OD x 5.40mm Thick x 5000mm Length, 88.90mm OD x 4.85mm Thick x 2000mm Length, 76.10mm OD x 3.25mm Thick x 2000mm Length complete with concreting and Masonary work for fixing the sintex box with hemispherical top cover with 4" x 4" junction box with IP 67 protection with PVC unsheathed copper leads in flexible green hose, MS clamps and aluminium painting

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection

Sub Total

GST 18%