Directorate Of Town Panchayats Tender

Supplying and fabrication of steel and placing in position of TMT steel rods for RCC works as per design given including cost of steel and GI binding wire in all floors etc., complete complying with standard specification in TNDSS NO:97 V,VI (S6) VII (S6), VII-3.

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers -

Plain Cement Concrete 1:2:4mix (One Cement, two Fine Aggregate and four Coarse Aggregate) Using 40mm ISS HBG metal for foundation and basement including dewatering if found necessary and laid in layer of not more than 15cm thick and consolidated including all cost conveyance of materials and labour charges etc. complete as per standard specifications and as directed by departmental Engineers

Supply and fixing foundation Bolts Length of bolt---1000mm, Diameter of Bolt--M24 Dia

Supply and delivery of 12mtrs System with all accessories mast shaft fully hot dip galvanished and should withstand wind velocity of 160 km per hour the mast should included head frame ss wire rope 6 mm dia double drum winch galvanized lantern carriage arrangement suitable to carry 6 n0's 150W LED luminaries with control gear box and flexible multi core trailing cable as specified in the relevant IS conditions with built in non flame proof power tool for simultaneous up ward and down ward movement of lantern carriage complete.

supply,laying and jointing of 10 core 2.5 sq.mm. armoured aluminium underground cable from feeder pillar to mast

supply,laying and jointing of 4 core 6sq.mm PVC copper UG cable from feeder pillar to EB service as directed by department officers

Earthing arrangements with GI Earth Plate including charcoal and salt with necessary excavation in all soils and to full depth as may be required and masonry work, re-filling the sides of foundation with excavated earth as per the standard specification and as directed by the Departmental Officers.

24 Hours Programmable Timer Switch with Shortest Switching Time15 Minutes