Corporation Of Chennai Tender

Supplying and placing of Ready Mix M20 Graded of Concrete confirming to IS 456/2000 for Reinforcement Cement Concrete Structural elements under controlled water cement ratio using 20mm and down graded machine broken granite stone jelly including transportation, pumping and Vibration excluding cost of centering and shuttering and reinforcement but including curing, finishing etc as directed by departmental officers

Brick work using best quality II class Ground moulded chamber burnt bricks of size 9" X 4-3/8" X 2-3/4" in cement mortor 1:6 for foundation and basement including curing etc complete complying with standard specification.

Plastering with cement mortar 1:4 (1 cement and 4 river sand)12mm thick including curing, etc., complete.

Painting the new plastered walls with two coats of Exterior emulsion paint (weather proof ) first class quality and of approved colour over a priming coat including thorough scrapping,clean removal of dirt,etc.,complete and including necessary plaster paris,putty etc., wherever required.as per (ISI STD) (It must provide excellent resistance against the growth of algae and fungi on the walls. And it must offer excellent protection against alkali and UV degradation and the durability period should be 5 years.

Supply of One No of 3 mtr X 60.3 mm OD X 3.65mm Thick Street Lamp Post, With 1 mtr Curved Single Bracket, 2 Core SMCFuse Box With Hot Dip Zinc Galvanising

Cost of Erection & Materials Required For 3 mtr Garden Lamp Pole With Brackets Conventional Foundation(Material Ratio - 1:1.5:3)

Cost of supply of 30W LED Street Light Fitting

Cost of supply of 120W LED Flood Light with Integrated Driver

I.SI.MARKED 2X25SQ.MM CABLE

HDPE PIPE OF SIZE 50 MM O.D X 38MM I.D

Laying of cable along road / street through 50mm OD, HDPE pipe (trench size 45cm width x 75 cm depth)

Supply of 63 Amp / 3Phase Microprocessor Based Digital Automatic Street Lighting On / off Controlling Timer Units As Per Departmental Specification

Fixing of Above 63 Amp / 3Phase Microprocessor Based Digital Automatic Street Lighting On / off Controlling Timer Units As Per Departmental Specification

Material And Labour For Numbering of Street Lamp Post

Supplying and erecting in position LIGHT DUTY STEEL TRUSSES as per the drawing. The materials and design of the trusses should confirm to the relevant Indian Standard specification. The trusses shall be procured only from reputed manufactures of trusses with prior approval of the Buildings Engineer and a certificate to the effect from the reputed manufacturers shall also be furnished with design. The rate quoted shall include the cost of trusses. Base-plate with holding down bolts and nuts to RCC or Masonry works, roof purlins, rafters, purlin sleeves, the members fixing accessories etc., painting one coat of red-oxide paint and erecting in position etc., complete as directed during execution. The contractor shall also arrange to provide grouting for holding down bolts embeding the end purlins, to the gable wall wherever necessary etc., The roof sheeting shall project 0.762m from the eves purlins. For structures like CYCLE STAND, PARKING GARAGE, TEMPORARY ENCLOSERS