Steel Tenders

Description: High Tensil Stainless Steel M-10 Bolt

Description: Lot No.m.cs-1.exmp.d & I.01.24-25.06, Description- Scrap Steel Casting (drag Boxes Centers Castings Streatcher Casting, Pivot Cbc Components Knuckles, Axle Boxes & Buffer Cases, Rubbing Blocks Etc). Our Offer :- Pinions, Thrower, Racers, Creddle, Adopter, Casnub Trolley, Center Pivot For Electric Loco, End Shield, Cbc Components, And Its Fittings Along With Draft Gear, Yoke, Wedge Block, Knuckle, Lock, Clevis, Coupler Body And Other Misc Cs-1 Items As In The Lot. Materials Lying In Two Places [one Place At "d-1" Sector] & [one Place At "i-8" Sector]. Cutting May Be Allowed Only For Casnub Trolley. Loading Will Be Done By Purchaser's Own Arrangement.

Description: 98111061 Condomn Bg Wagon Rolling Stock Iron Body Iron Floor And Steel Body Steel Floor 8 Wheeler Wagons. Wagon No. 1. 30058961664 Nf Bcn 2. 30028960789 Er Bcn 3. 30088961429 Wr Bcn 4. 30058960957 Nf Bcn 5. 30018960867 Cr Bcn 6. 30028965906 Er Bcn 7. 30018962526 Cr Bcn 8. 30058960063 Nf Bcn 9. 30078962566 Se Bcn 10. 30078964157 Se Bcn 11. 30028964282 Er Bcn Total- 11 Nos.

Description: Contract For Carrying Out Structural Steel Works At Main Campus Ursc Vimanapura Bengaluru 560017

Purchaser Name: Steel Authority Of India Limited | CATEGORY: Khandsari Molasses

Description: Lot No.divn/nmp/60/01/24-25/bg/cond./8w/wgn. Description- Iron And Steel Scrap Cutup Parts Of Bg Cond./8w/wgn. Without Contents If Any. 1) Scr 30098960559 Bcnm1 (nlb) 2) Er30028962967 Bcnm1 (nlb) 3) Ser 30078963273 Bcnm1 (nlb) 4) Er 30028998683 Bcnm1 (nlb) 5) Cr 30018824152 Bcnm1 (nlb) 6) Er 30028760723 Bcnm1 (nlb) 7) Scr 30098979193 Bcnm1 (wm) Nb: (1) : I) Wagons Are To Be Sold Without 12 Nos. Nlb Trolleys Against Srl. No. 01 To 06. Ii) Wagon To Be Sold With 02 Nos Wm Trolleys Against Srl 07. Iii) All Wagons To Be Sold Without 28 Nos. Wheel Sets With Ctrb, Brake Cylinder Complete, Brake Gear Complete, Hand Brake Set Complete With Connecting Link, Bush, Seam Less Pipe With Fitting For Air Brake Equipment, Distributor Valve, Apm Valve, Sab, Coupler Body With Shank Wear Plate, Knuckle, Knuckle Pivot Pin, Coupler Yoke, Yoke Pin, Yoke Pin Support With Wear Plate, High Capacity Draft Gear With Draft Gear Follower, Etc And Other Excluded Fitting As Per Latest Excluded Fitting List * *excluded Fitting List Letter No. M2/c-19/e.ftg/ 1302 Dt.25.10.2023, Nb(2): Special Condition For Rolling Stock- A) All Excluded Fitting Along With Nlb Trolleys Are To Be Handed Over By The Purchaser To Sse/c&w/nmp At (nimpura) And Wheel Sets To Sse/44/nws/kgp Respectively Nominated Location Suggested By The Concerned Sse Respectively For Which They Have To Arrange Labour,tools & Equipment For Loading Of The Excluded Items From Cutting Site And Then Transport It To Nominated Location By Their Own Arrangement/vehicle. They Have To Unload And Stack The Excluded Materials By Their Own Arrangement Including Labour And Hand Over The Same To Concern Stock Holder With Clear Acknowledgement. (b) The Excluded Fittings Should Be Kept Away From The Cutting Lines And Adjacent Areas So That Future Grounding Of Rolling Stock Is Not Hampered In Any Way. The Delivery Of Cut Pieces Of Last 10 Percent Of Lot Size (subject To Minimum Of 01 No. Rolling Stock) Will Commence Only When All Excluded Fittings Arisen Out Of Sold Lot Has Been Successfully Handed Over To Custodian. (c) Delivery Witnessing Official Will Record Following Certificate On Sale Delivery Register. "purchaser Has Cleared All Nil Value Item Arisen After Cutting Of Sold Rolling Stock And There Is No Left Over Available At Cutting Site. (d) The Rolling Stock May Either Be On The Cutting Line Or Grounded And May Or May Not Have Trolleys/wheel Set Attached But The Purchaser Needs To Shift To Concerned Location As Advised By Concerned Sse. (e)the Purchaser Is Required To Take Adequate Safety Measures So That No Railway Property In Near Vicinity Of The Cutting Spot/ Loading Point And Unloading Point Is Damaged In Any Way. The Purchaser Will Be Responsible For Any Damage/fire Accident To The Railway Property Caused During Operation And Delivery, And Also He Will Be Solely Responsible Of Any Loss Applied (railway Employee Or Any Other Person) Caused Due To Any Activities Involved While Dismantling /cutting, Transportation Loading And Unloading Of All Excluded Fittings Of The Wagons. Including Wheel Sets And Trolleys. Nb: (3) The Firm Shall Follow All Rules Regarding The Loading Of Vehicle As Per Rto/statuary Body Governed Time To Time. Railway Will Not Be Responsible Any Breach Of Rule During Loading /transportation Done By The Purchaser. Nb: (4) Delivery Will Be Given In Numbers.

Description: Lot No.divn/nmp/59/01/24-25/bg/cond./8w/wgn. Description- Iron And Steel Scrap Cutup Parts Of Bg Cond./8w/wgn. Without Contents If Any. 1) Scr 30098961662 Bcnm1 (nlb) 2) Ser 30078964874 Bcnm1 (nlb) 3) Nfr 30058960780 Bcnm1 (nlb) 4) Er 30028964848 Bcnm1 (nlb) 5) Wr 30088931316 Bcnm1 (nlb) 6) Nr 30038960519 Bcnm1 (nlb) 7) Er 30028963964 Bcnm1 (nlb) 8) Nr 30038961622 Bcnm1 (nlb) Nb: (1) : I) Wagons Are To Be Sold Without 16 Nos. Nlb Trolleys Against Srl. No. 01 To 08. Ii) All Wagons To Be Sold Without 32 Nos. Wheel Sets With Ctrb, Brake Cylinder Complete, Brake Gear Complete, Hand Brake Set Complete With Connecting Link, Bush, Seam Less Pipe With Fitting For Air Brake Equipment, Distributor Valve, Apm Valve, Sab, Coupler Body With Shank Wear Plate, Knuckle, Knuckle Pivot Pin, Coupler Yoke, Yoke Pin, Yoke Pin Support With Wear Plate, High Capacity Draft Gear With Draft Gear Follower, Etc And Other Excluded Fitting As Per Latest Excluded Fitting List * *excluded Fitting List Letter No. M2/c-19/e.ftg/ 1302 Dt.25.10.2023, Nb(2): Special Condition For Rolling Stock- A) All Excluded Fitting Along With Nlb Trolleys Are To Be Handed Over By The Purchaser To Sse/c&w/nmp At (nimpura) And Wheel Sets To Sse/44/nws/kgp Respectively Nominated Location Suggested By The Concerned Sse Respectively For Which They Have To Arrange Labour,tools & Equipment For Loading Of The Excluded Items From Cutting Site And Then Transport It To Nominated Location By Their Own Arrangement/vehicle. They Have To Unload And Stack The Excluded Materials By Their Own Arrangement Including Labour And Hand Over The Same To Concern Stock Holder With Clear Acknowledgement. (b) The Excluded Fittings Should Be Kept Away From The Cutting Lines And Adjacent Areas So That Future Grounding Of Rolling Stock Is Not Hampered In Any Way. The Delivery Of Cut Pieces Of Last 10 Percent Of Lot Size (subject To Minimum Of 01 No. Rolling Stock) Will Commence Only When All Excluded Fittings Arisen Out Of Sold Lot Has Been Successfully Handed Over To Custodian. (c) Delivery Witnessing Official Will Record Following Certificate On Sale Delivery Register. "purchaser Has Cleared All Nil Value Item Arisen After Cutting Of Sold Rolling Stock And There Is No Left Over Available At Cutting Site. (d) The Rolling Stock May Either Be On The Cutting Line Or Grounded And May Or May Not Have Trolleys/wheel Set Attached But The Purchaser Needs To Shift To Concerned Location As Advised By Concerned Sse. (e)the Purchaser Is Required To Take Adequate Safety Measures So That No Railway Property In Near Vicinity Of The Cutting Spot/ Loading Point And Unloading Point Is Damaged In Any Way. The Purchaser Will Be Responsible For Any Damage/fire Accident To The Railway Property Caused During Operation And Delivery, And Also He Will Be Solely Responsible Of Any Loss Applied (railway Employee Or Any Other Person) Caused Due To Any Activities Involved While Dismantling /cutting, Transportation Loading And Unloading Of All Excluded Fittings Of The Wagons. Including Wheel Sets And Trolleys. Nb: (3) The Firm Shall Follow All Rules Regarding The Loading Of Vehicle As Per Rto/statuary Body Governed Time To Time. Railway Will Not Be Responsible Any Breach Of Rule During Loading /transportation Done By The Purchaser. Nb: (4) Delivery Will Be Given In Numbers.

Purchaser Name: NMDC Steel Limited | CATEGORY: Resin Resin Trap/Media Trap , Ejector Resin I 20 NB Ejector

Description: Iron And Steel Scrap Cut Up Parts Of Condemned Over-aged Loco No. 21393, Type-wam4, S.e.rly, Super Structure With Cabs Inclusive Camber, Complete Motorized Bogies, Tfp With Gr & Smgr, Auxiliary Motors, Pneumatic Pipe Line & Valves, Ht Gratting And Panel Channels, Rsi Panel Frame, Single & Multi Core Cables, Copper Bus Bar, Relay & Switch Panel Etc., Total Weight Of Components-111.232 Mt(approx)

Description: CATEGORY: Kero Heater Big , Kero Heater Small , Tiffin , Red Paint , Yellow Paint , Gas Regulator , Gas Pipe , Tea Strainer , Lime , Brush , USB Printer Case , Volley Ball Net , Foot Ball , Shuttle Cock , Badminton bat , Spoon , Tea Pan Stainless Steel , Patila Steel , Handle , Chitakani , Hings , Gatti