Urban Improvement Trust Tender

Item Code [2019 11.3]:Item Type [building] ::Cement concrete flooring grade 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate) rounding off edges etc. but excluding the cost of nosing of steps etc. complete: Sub Item Code [2019 11.3 + 11.3.5]: Cement concrete flooring grade 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate) rounding off edges etc. but excluding the cost of nosing of steps etc. complete: Add extra if finished with a floating coat of neat cement including cement slurry, making of lines or grooves etc. complete

Item Code [2019 12.15]:Item Type [building] :: Finishing with neat cement (punning)

Item Code [2019 12.9]:Item Type [building] ::Plaster on new surface on wall in cement sand mortar 1:6 including raking of joints etc. complete fine finish: Sub Item Code [2019 12.9 + 12.9.2]: Plaster on new surface on wall in cement sand mortar 1:6 including raking of joints etc. complete fine finish: 20mm thick

Item Code [2019 13.1]:Item Type [building] :: Repair to stone masonry in cement sand mortar 1:6 with old and new stone.

Item Code [2019 15.2]:Item Type [building] ::Providing and laying damp-proof course with cement concrete grade M-150 (1:2:4) mortar prepared with 1 % solution of water-proof compound, including two coats of hot blown bitumen ( 2 Kg. per sqm) complete as per specification with glass strip 3 mm thick at a distance of 1 m interval: Sub Item Code [2019 15.2 + 15.2.3]: Providing and laying damp-proof course with cement concrete grade M-150 (1:2:4) mortar prepared with 1 % solution of water-proof compound, including two coats of hot blown bitumen ( 2 Kg. per sqm) complete as per specification with glass strip 3 mm thick at a distance of 1 m interval: 75 mm thick

Item Code [2019 3.2]:Item Type [building] ::Providing and laying in position cement concrete including curing compaction etc . Complete in specified grade excluding the cost of centering and shuttering. All work up to plinth level using crusher broken aggregate Sub Item Code [2019 3.2 + 3.2.3]: Providing and laying in position cement concrete including curing compaction etc . Complete in specified grade excluding the cost of centering and shuttering. All work up to plinth level using crusher broken aggregate M15 grade Nominal Mix ( with graded stone aggregate 20mm nominal size)

Item Code [2019 3.2]:Item Type [building] ::Providing and laying in position cement concrete including curing compaction etc . Complete in specified grade excluding the cost of centering and shuttering. All work up to plinth level using crusher broken aggregate Sub Item Code [2019 3.2 + 3.2.8]: Providing and laying in position cement concrete including curing compaction etc . Complete in specified grade excluding the cost of centering and shuttering. All work up to plinth level using crusher broken aggregate 1:5:10 ( 1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)

Item Code [2019 4.1]:Item Type [building] ::Providing and laying in position specified grade of reinforcement cement concrete all RCC structural elements upto plinth level including curing compaction finishing with rendering in cement sand mortar 1:3 ( 1 cement : 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement Sub Item Code [2019 4.1 + 4.1.2]: Providing and laying in position specified grade of reinforcement cement concrete all RCC structural elements upto plinth level including curing compaction finishing with rendering in cement sand mortar 1:3 ( 1 cement : 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement M20 Grade nominal mix (with graded stone aggregate 20mm nominal size)

Item Code [2019 4.12]:Item Type [building] ::Providing and fabricating reinforcement for RCC work including straightening, cutting, bending, placing in position in binding (including cost of binding wire ) all complete up to floor three level Sub Item Code [2019 4.12 + 4.12.2]: Providing and fabricating reinforcement for RCC work including straightening, cutting, bending, placing in position in binding (including cost of binding wire ) all complete up to floor three level Thermo mechanically treated bars (conforming to relevant IS:1786.)

Item Code [B 2019 4.6]:Item Type [building] :: Centering and shuttering with steel plates/ plywood sheet including strutting, propping bracing both ways and removal of formworks for foundation in basement rafts, footings, straps beams, bases of columns etc. up to plinth level.

Item Code [G-5 (Carriage of Material]:Item Type [building] ::Carriage of following material including loading unloading and stacking if required complete in all respect. Earth, Sand, Lime, Moorum, manure or sludge, Building Rubbish, Stone Metal (Girt and Ballast etc), Stone for Masonary work and soiling and excavated rock etc. Sub Item Code [G-5 (Carriage of Material + G5.1.1 (4 column)]: Carriage of following material including loading unloading and stacking if required complete in all respect. Earth, Sand, Lime, Moorum, manure or sludge, Building Rubbish, Stone Metal (Girt and Ballast etc), Stone for Masonary work and soiling and excavated rock etc. For 1 Km

Item Code [R16.41]:Item Type [road] :: Sub Item Code [R16.41 + R16.41.1]: Providing & fixing of Reinforced Ferro-Cement Drain cover designed for class A & AA loading duly marked on cover with adequate steel reinforcement having thickness 75 mm to 150 mm, anti-corrosive bitumen painted M.S. plate, Rim and on M.S. lifting hooks, admixture like plasticizer, bond improving compound, shrinkage resistance compound, abrasion resistant complete as per approved design etc 300 to 450 mm 600 x 800 mm sqm

Item Code [R16.41]:Item Type [road] ::Providing & fixing of Reinforced Ferro-Cement Drain cover designed for class A & AA loading duly marked on cover with adequate steel reinforcement having thickness 75 mm to 150 mm, anti-corrosive bitumen painted M.S. plate, Rim and on M.S. lifting hooks, admixture like plasticizer, bond improving compound, shrinkage resistance compound, abrasion resistant complete as per approved design etc Sub Item Code [R16.41 + R16.41.2]: Providing & fixing of Reinforced Ferro-Cement Drain cover designed for class A & AA loading duly marked on cover with adequate steel reinforcement having thickness 75 mm to 150 mm, anti-corrosive bitumen painted M.S. plate, Rim and on M.S. lifting hooks, admixture like plasticizer, bond improving compound, shrinkage resistance compound, abrasion resistant complete as per approved design etc 451 to 700 mm 1000 x 800 mm sqm