Rajasthan State Road Development And Construction Corporation Limited Tender
... More
The RSRDC has issued a formal invitation for competitive bids for the Rajasthan State Road Development And Construction Corporation Limited project, for Various Misc. Work Consisting Supplying And Fixing Of Upvc Window, Reinforcement And Other At Costruction Of Ccb Building, Sri Ganganagar. (excluding Cost Of Cement) in Sri Ganganagar, Rajasthan, with an estimated contract value of Rs. 4,57,88,000. The bid opening date for this tender is 28-05-2025 and the last date for bid submission is 06-06-2025. Interested bidders for Rajasthan State Road Development And Construction Corporation Limited tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Rajasthan State Road Development And Construction Corporation Limited - RSRDC Tender
Civil And Construction
Eprocure
Opening Date28 May 2025
Closing Date6 Jun 2025
Tender Amount₹ 4,57,88,000
AI Insights
Technical
Technical
Additional Eligibility
Bid Capacity
... View More
The formula for bid capacity is: Assessed Available Bid capacity = (A * N * 2 - B) Where:
A = Maximum value of construction works executed in anyone year during the last five years
N = Number of years prescribed for completion of the works for which bids are invited
B = Value of existing commitments and on-going works to be completed during the next N years
Technical Capacity
... View More
The required prior work experience for the bidder involves having experience in works of a similar nature and size within the last five years. The bidder should have completed works of a similar nature, with the value of such works being considered in the evaluation of the bidder's qualifications. However, specific details such as the exact amount or percentage of similar works completed are not explicitly stated. The bidder is required to provide the total monetary value of construction work performed for each of the last five years. They should also provide information on the value of similar works completed, but the specific percentage of similar works completed is not mentioned. In terms of calculation, the bidder's available bid capacity should be more than the total bid value, calculated based on the maximum value of construction works executed in anyone year during the last five years. The formula for calculation is: Assessed Available Bid capacity = (A * N * 2 - B), where A is the maximum value of construction works executed in anyone year during the last five years, N is the number of years prescribed for completion of the works, and B is the value of existing commitments and on-going works to be completed during the next N years. No specific amount or percentage is mentioned as a requirement for prior work experience. The bidder should demonstrate experience in construction of similar civil engineering works, and a Project Manager with a minimum of three years' experience in construction of similar civil engineering works is required. The bidder should upload scanned copies of certificates showing details of similar nature of works executed, and provide their annual turnover certificate for the last five financial years with a breakup of construction works and total works for each financial year.
Costs
EMD
₹ 9,15,760Document Cost
₹ 2,360Tender Fee
₹ 2,000
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_RSRDC_474036_1Tender No
RSRDCC E-NIT 119/2025-26 DATED 27.05.2025Tender Authority
Rajasthan State Road Development And Construction Corporation Limited ViewPurchaser Address
-Website
http://http://roads.rajasthan.gov.in/content/raj/roads/en/home.html
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
SBD (Standard Bidding Documents)
BOQ Items
... More
Columns, pillars, posts and struts etc.
1785
305
-
... More
Providing and laying in position Ready mix concrete manufactured in fully automatic Batching Plant and transported to site in transit mixer for having continous agitated mixer, manufactured as per approved mix design of specified grade of RCC work including pumping of R.M.C. from transit mixer to site of laying , exculding the cost of centering, shuttering and reinforcement with all lead and lift including cost of admixtures in recommended portion as per IS 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in charge . All works upto floor V floor
M20 grade Design Mix by using min 400 Kg of cement per cum of concrete.(Excluiding cost of cement)
1368.77
3384
-
... More
Providing M-25 grade concrete by using min 410 kg of cement per cum instead of M-20 grade design mix. (Excluiding cost of cement)
1368.77
8
-
... More
Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. Thermo-mechanically Treated bars (Conforming of relevent IS code)
170090.38999999998
67
-
... More
Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete.
Jhunjhunu / Jalore (Red / Choclate Colour).
Above 3601 cm2 Slabs (Excluiding cost of cement)
811.8
2924
-
... More
Extra for providing edge moulding to 15-18mm thick marble/ Granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work
2154.56
247
-
... More
P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete. size 600 mm X 600 mm.(Excluiding cost of cement)
661.38
1170
-
... More
Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand).For area of each slab from 2001 to 5000 Sq.Cm (Excluiding cost of cement)
2260
833
-
... More
Extra for Mirror polishing on terrazzo/Kota stone work where ever required to give high gloss finish complete.
2260
126
-
... More
Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. (Excluiding cost of cement)
5135.56
118
-
... More
Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.
12766.996000000001
34
-
... More
Finishing walls with textured exterior paint of required shade as per approved colour complete as per manufacturers specifications including primer coat and protecting coat Trowel Finish av. thickness 1500 to 2000 microns.
5135.56
424
-
... More
Providing and fixing designer cement concrete polished tiles over 20mm average thick base of CM 1 :4 (1 Cement : 4 sand) jointing with cement mortar 1 :2 ( 1cement : 2 sand) with pigment to match the shade of the tiles complete with all respect. (Excluiding cost of cement)
1474.5
1315
-
... More
Providing and fixing of uPVC Sliding windows manufactured in ISO 9001:2000 & 14001:2004 certified company. Frame : Made from the Extruded uPVC Window Profile Section of size 80 x 52mm having outer wall thickness of 2.25mm (+/- 0.2mm) and 3 box multi-chamber construction, White in finish, duly reinforced with 1.2mm thick G/J/U/O TYPE GI section. Frame shall have three track configuration, two for sliding of window shutter and one for mosquito mesh shutter. Vertical member of frame which bears the sliding shutter load shall have aluminium rail/track for smooth sliding of shutter rollers. All the four corners shall be mitered cut & thermal welded so as to form window frame. Frame shall be milled with drain and air equalizer hole in order to be water tight and for drainage of accumulated water, if any, to outer side. Shutter : The shutter of sliding window shall be made of 54 x 38mm Extruded 3 box multi-chamber uPVC Window Profile Section of white colour having outer wall thickness of 2.25mm (+/- 0.2mm) provided with reinforcement of 1.2mm thick G/J/U/O TYPE GI section duly mitered cut & thermal welded at all corners and fitted with uPVC glazing bead of size 20.5 x 16mm with ‘K’ & ‘O’ type inner and outer EPDM weather seal gaskets alongwith 5mm thick ISI make plain float glass. Mesh shutter (optional) shall be made of 52 x 21.5mm Extruded 3 box multi-chamber uPVC Window Profile Section of white colour having outer wall thickness of 2mm (+/- 0.2mm) provided with reinforcement of 1.2mm thick U TYPE GI section duly mitered cut & thermal welded at all corners and fitted with nylon/polymer mesh and rollers/pully.
-
-
-
... More
All welding joints of frame and shutter shall be cleaned and milled with the CNC mechanism to provide uniform grooved finish on all visible joints. Hardware : Each sliding shutter is to be fixed with frame on two pullys/rollers and Locking of windows is provided with push lock (touch-lock) of powder-coated white finish. Necessary wind-breaking block, rubber buffer blocks are to be provided in windows for prevention / buffering the collision between window frame and shutter when sliding. Installation at Site : Complete window is to be installed on site with 10 x 100mm fastners with white cap in existing pre-finished wall cut-out cemented to glass level plane at all height & width and silicon glue is applied to fill up the crevices between wall and window frame. Complete in all respect as per the drawing and specifications and direction of engineer-in-charge.
With mesh shuteer
2624.5499999999997
6329
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements