Public Works Department Tender
If you're looking for Rajasthan tenders online and are tired of typing tender ID over and again or going through the cumbersome government websites for it, you are in luck. We have collated every Eproc Rajasthan tender on BidAssist. And for any queries related to an e-tender Rajasthan, like bidding process, registration process, etc., are explained below. Read on.
Costs
EMD
₹ 73,000Document Cost
₹ 500Tender Fee
₹ 500
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_CEPWD_441037_3Bid Award Id
ViewTender No
NIT NO 31 2024-25Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://pwd.rajasthan.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Restoration of rain cuts with soil, morrum, gravel or a mixtrue of these including all leads and lifts and cost of arrangement of land, cleaning the loose soil, benching for 300mm width, laying fresh material in layers not exceeding 250mm and compacting with plate compactor or power rammer to restore the original alignment levels
and slopes complete as per MoRTH specification clause 3002.
27
156
4212
... More
Providing, laying, spreading and compacting stone aggregate of specific size as per table 400-6 & 400-7 to Water Bound Macadam specification including spreading in uniform thickness, hand packing, rolling with power roller 8-10 tonnes, in stages to proper grade and camber, applying and brooming requisite type of Crushable screening to fill-up the interstices of coarse aggregates, watering (with water browser) and rolling, making necessary earthen bund to protect edegs, lighting, guarding, barricading and maintenance of diversion etc. [MoRTH specification : Clause 404] (by manual means) with all leads (compacted thickness as specified to be measured),Grading no.3 (53-22.4 mm) crusher broken
40
971
38852
... More
6. A/R to Dholiya Km 0/0 to 2/0
-
-
-
... More
Providing and laying 20 mm thick premix patching with 0.27 cum of stone chipping ( 0.18 cum of 13.2 mm size and 0.09 cum of 11.2 mm size ) mixed with 14.6 kg of straight run bitumen per 10 sqm of road surface including heating of binder and aggregate, cleaning the area of patch, pot holes cut to regular shape with vertical sides, removing all loose & disintegrated material, application of tack coat @ 2.25 kg per 10 sqm., laying of patching material and compacting with 8-10 tonne power road roller including cost of bitumen , aggregate, fuel, lubrication, binder ,hire charges of Machinery, T&P etc.
540
123
66738.6
... More
Providing and laying premixed sand seal coat on patch area comprising of thin application of fine aggregate (0.06 cum/10 sqm) premixed with 6.8kg/10 sqm binder 80/100 grade in mini hot mix plant 6-10 TPH and laying and rolling with power roller 8-10 tonne including all lead of mix material.
540
45
24327
... More
Providing and laying granular sub-base material having P.I.not more than 6, including compacted thickness and consolidation by 8-10 tonne power roller at OMC to achieve desired density to required camber and grade including cost of water and hire charges of machinery, including T&P and all lead of material from quarry (compacted thickness to be measured). Grading as per MoRTH specification : Table 400-1, 400-2 with CBR value not less than 15 To achieve 100% Proctor density
25
286
7150
... More
Restoration of rain cuts with soil, morrum, gravel or a mixtrue of these including all leads and lifts and cost of arrangement of land, cleaning the loose soil, benching for 300mm width, laying fresh material in layers not exceeding 250mm and compacting with plate compactor or power rammer to restore the original alignment levels
and slopes complete as per MoRTH specification clause 3002.
30
156
4680
... More
Providing, laying, spreading and compacting stone aggregate of specific size as per table 400-6 & 400-7 to Water Bound Macadam specification including spreading in uniform thickness, hand packing, rolling with power roller 8-10 tonnes, in stages to proper grade and camber, applying and brooming requisite type of Crushable screening to fill-up the interstices of coarse aggregates, watering (with water browser) and rolling, making necessary earthen bund to protect edegs, lighting, guarding, barricading and maintenance of diversion etc. [MoRTH specification : Clause 404] (by manual means) with all leads (compacted thickness as specified to be measured),Grading no.3 (53-22.4 mm) crusher broken
14.5
971
14083.85
... More
9. Sumel to Rawaniya Km 0/0 to 5/00
-
-
-
... More
Providing and laying 20 mm thick premix patching with 0.27 cum of stone chipping ( 0.18 cum of 13.2 mm size and 0.09 cum of 11.2 mm size ) mixed with 14.6 kg of straight run bitumen per 10 sqm of road surface including heating of binder and aggregate, cleaning the area of patch, pot holes cut to regular shape with vertical sides, removing all loose & disintegrated material, application of tack coat @ 2.25 kg per 10 sqm., laying of patching material and compacting with 8-10 tonne power road roller including cost of bitumen , aggregate, fuel, lubrication, binder ,hire charges of Machinery, T&P etc.
875
123
108141.25
... More
Providing and laying premixed sand seal coat on patch area comprising of thin application of fine aggregate (0.06 cum/10 sqm) premixed with 6.8kg/10 sqm binder 80/100 grade in mini hot mix plant 6-10 TPH and laying and rolling with power roller 8-10 tonne including all lead of mix material.
875
45
39418.75
... More
Providing and laying granular sub-base material having P.I.not more than 6, including compacted thickness and consolidation by 8-10 tonne power roller at OMC to achieve desired density to required camber and grade including cost of water and hire charges of machinery, including T&P and all lead of material from quarry (compacted thickness to be measured). Grading as per MoRTH specification : Table 400-1, 400-2 with CBR value not less than 15 To achieve 100% Proctor density
130
286
37180
... More
Restoration of rain cuts with soil, morrum, gravel or a mixtrue of these including all leads and lifts and cost of arrangement of land, cleaning the loose soil, benching for 300mm width, laying fresh material in layers not exceeding 250mm and compacting with plate compactor or power rammer to restore the original alignment levels
and slopes complete as per MoRTH specification clause 3002.
130
156
20280
... More
Providing, laying, spreading and compacting stone aggregate of specific size as per table 400-6 & 400-7 to Water Bound Macadam specification including spreading in uniform thickness, hand packing, rolling with power roller 8-10 tonnes, in stages to proper grade and camber, applying and brooming requisite type of Crushable screening to fill-up the interstices of coarse aggregates, watering (with water browser) and rolling, making necessary earthen bund to protect edegs, lighting, guarding, barricading and maintenance of diversion etc. [MoRTH specification : Clause 404] (by manual means) with all leads (compacted thickness as specified to be measured),Grading no.3 (53-22.4 mm) crusher broken
90
971
87417
... More
10. Pratapgarh to Sodhpura road Km 0/0 to 6/0
-
-
-
... More
Providing and laying 20 mm thick premix patching with 0.27 cum of stone chipping ( 0.18 cum of 13.2 mm size and 0.09 cum of 11.2 mm size ) mixed with 14.6 kg of straight run bitumen per 10 sqm of road surface including heating of binder and aggregate, cleaning the area of patch, pot holes cut to regular shape with vertical sides, removing all loose & disintegrated material, application of tack coat @ 2.25 kg per 10 sqm., laying of patching material and compacting with 8-10 tonne power road roller including cost of bitumen , aggregate, fuel, lubrication, binder ,hire charges of Machinery, T&P etc.
1200
123
148308
... More
Providing and laying premixed sand seal coat on patch area comprising of thin application of fine aggregate (0.06 cum/10 sqm) premixed with 6.8kg/10 sqm binder 80/100 grade in mini hot mix plant 6-10 TPH and laying and rolling with power roller 8-10 tonne including all lead of mix material.
1200
45
54060
... More
Earthwork in excavation in foundation trenches etc. not exceeding 2 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil 3m. Clear from the edge of excavation and subsequent filling around hume pipes/masonry in 15cm layers with compaction including disposal of all surplus soil as directed within a lead of 1000 metres.[MoRTH Specification : Clause 301,304]. Hard soil with pick work
12
140
1680
... More
Providing and laying mechanically mixed and vibrated Cement Concrete in foundation upto a depth of 1.5 metres below ground level and 1.50 metres above Ground/Bed level as per MoRTH Specification : Clause 1000 & 1700 P.C.C. 1:3:6 mix with stone aggragate 40 mm hand broken
1.8
3003
5405.4
... More
Providing and laying stone masonry work in cement mortar 1:3 with mechanical mixer for foundation (any level) complete including all scaffolding etc. but excluding pointing and plastering as per drawing and technical specification as per MoRTH Specification : Section 1000,1400 Random rubble masonry
19.44
3301
64173.38
... More
Providing Cement plaster 12mm thick in cement mortar 1:3 at all levels as per MoRTH Specfication: Clause:1000 & 1300
12
137
1650
... More
Providing and laying Plain cement concrete mix with stone aggregate 20 mm nominal size mechnically mixed and vibrated in foundation up to a depth of 1.50 metres below ground level and/or 1.50 metres above ground/bed level as per MoRTH specification : clause 1000 & 1700. with all lead, P.C.C. grade M-15 in superstructure upto 4.5 mtr. from ground level
0.18
3579
644.29
... More
Providing and laying granular sub-base material having P.I.not more than 6, including compacted thickness and consolidation by 8-10 tonne power roller at OMC to achieve desired density to required camber and grade including cost of water and hire charges of machinery, including T&P and all lead of material from quarry (compacted thickness to be measured). Grading as per MoRTH specification : Table 400-1, 400-2 with CBR value not less than 15 To achieve 100% Proctor density
120
286
34320
... More
Restoration of rain cuts with soil, morrum, gravel or a mixtrue of these including all leads and lifts and cost of arrangement of land, cleaning the loose soil, benching for 300mm width, laying fresh material in layers not exceeding 250mm and compacting with plate compactor or power rammer to restore the original alignment levels
and slopes complete as per MoRTH specification clause 3002.
30
156
4680
... More
Providing, laying, spreading and compacting stone aggregate of specific size as per table 400-6 & 400-7 to Water Bound Macadam specification including spreading in uniform thickness, hand packing, rolling with power roller 8-10 tonnes, in stages to proper grade and camber, applying and brooming requisite type of Crushable screening to fill-up the interstices of coarse aggregates, watering (with water browser) and rolling, making necessary earthen bund to protect edegs, lighting, guarding, barricading and maintenance of diversion etc. [MoRTH specification : Clause 404] (by manual means) with all leads (compacted thickness as specified to be measured),Grading no.3 (53-22.4 mm) crusher broken
37.4
971
36326.62
... More
11.A/R to Pratapgarh Km 0/0 TO 3/0
-
-
-
... More
Providing and laying 20 mm thick premix patching with 0.27 cum of stone chipping ( 0.18 cum of 13.2 mm size and 0.09 cum of 11.2 mm size ) mixed with 14.6 kg of straight run bitumen per 10 sqm of road surface including heating of binder and aggregate, cleaning the area of patch, pot holes cut to regular shape with vertical sides, removing all loose & disintegrated material, application of tack coat @ 2.25 kg per 10 sqm., laying of patching material and compacting with 8-10 tonne power road roller including cost of bitumen , aggregate, fuel, lubrication, binder ,hire charges of Machinery, T&P etc.
731.5
123
90406.09
... More
Providing and laying premixed sand seal coat on patch area comprising of thin application of fine aggregate (0.06 cum/10 sqm) premixed with 6.8kg/10 sqm binder 80/100 grade in mini hot mix plant 6-10 TPH and laying and rolling with power roller 8-10 tonne including all lead of mix material.
731.5
45
32954.08
... More
Providing and laying granular sub-base material having P.I.not more than 6, including compacted thickness and consolidation by 8-10 tonne power roller at OMC to achieve desired density to required camber and grade including cost of water and hire charges of machinery, including T&P and all lead of material from quarry (compacted thickness to be measured). Grading as per MoRTH specification : Table 400-1, 400-2 with CBR value not less than 15 To achieve 100% Proctor density
32
286
9152
... More
Restoration of rain cuts with soil, morrum, gravel or a mixtrue of these including all leads and lifts and cost of arrangement of land, cleaning the loose soil, benching for 300mm width, laying fresh material in layers not exceeding 250mm and compacting with plate compactor or power rammer to restore the original alignment levels
and slopes complete as per MoRTH specification clause 3002.
27
156
4212
... More
Providing, laying, spreading and compacting stone aggregate of specific size as per table 400-6 & 400-7 to Water Bound Macadam specification including spreading in uniform thickness, hand packing, rolling with power roller 8-10 tonnes, in stages to proper grade and camber, applying and brooming requisite type of Crushable screening to fill-up the interstices of coarse aggregates, watering (with water browser) and rolling, making necessary earthen bund to protect edegs, lighting, guarding, barricading and maintenance of diversion etc. [MoRTH specification : Clause 404] (by manual means) with all leads (compacted thickness as specified to be measured),Grading no.3 (53-22.4 mm) crusher broken
40
971
38852
... More
12. A/R Zadili Manpura Km 0/0 to 2/0
-
-
-
... More
Providing and laying 20 mm thick premix patching with 0.27 cum of stone chipping ( 0.18 cum of 13.2 mm size and 0.09 cum of 11.2 mm size ) mixed with 14.6 kg of straight run bitumen per 10 sqm of road surface including heating of binder and aggregate, cleaning the area of patch, pot holes cut to regular shape with vertical sides, removing all loose & disintegrated material, application of tack coat @ 2.25 kg per 10 sqm., laying of patching material and compacting with 8-10 tonne power road roller including cost of bitumen , aggregate, fuel, lubrication, binder ,hire charges of Machinery, T&P etc.
540
123
66738.6
... More
Providing and laying premixed sand seal coat on patch area comprising of thin application of fine aggregate (0.06 cum/10 sqm) premixed with 6.8kg/10 sqm binder 80/100 grade in mini hot mix plant 6-10 TPH and laying and rolling with power roller 8-10 tonne including all lead of mix material.
540
45
24327
... More
Providing and laying granular sub-base material having P.I.not more than 6, including compacted thickness and consolidation by 8-10 tonne power roller at OMC to achieve desired density to required camber and grade including cost of water and hire charges of machinery, including T&P and all lead of material from quarry (compacted thickness to be measured). Grading as per MoRTH specification : Table 400-1, 400-2 with CBR value not less than 15 To achieve 100% Proctor density
25
286
7150
... More
Restoration of rain cuts with soil, morrum, gravel or a mixtrue of these including all leads and lifts and cost of arrangement of land, cleaning the loose soil, benching for 300mm width, laying fresh material in layers not exceeding 250mm and compacting with plate compactor or power rammer to restore the original alignment levels
and slopes complete as per MoRTH specification clause 3002.
30
156
4680
... More
Providing, laying, spreading and compacting stone aggregate of specific size as per table 400-6 & 400-7 to Water Bound Macadam specification including spreading in uniform thickness, hand packing, rolling with power roller 8-10 tonnes, in stages to proper grade and camber, applying and brooming requisite type of Crushable screening to fill-up the interstices of coarse aggregates, watering (with water browser) and rolling, making necessary earthen bund to protect edegs, lighting, guarding, barricading and maintenance of diversion etc. [MoRTH specification : Clause 404] (by manual means) with all leads (compacted thickness as specified to be measured),Grading no.3 (53-22.4 mm) crusher broken
14.5
971
14083.85
... More
13. A/R to Kesarpura Km 0/0 to 1/0
-
-
-
... More
Providing and laying 20 mm thick premix patching with 0.27 cum of stone chipping ( 0.18 cum of 13.2 mm size and 0.09 cum of 11.2 mm size ) mixed with 14.6 kg of straight run bitumen per 10 sqm of road surface including heating of binder and aggregate, cleaning the area of patch, pot holes cut to regular shape with vertical sides, removing all loose & disintegrated material, application of tack coat @ 2.25 kg per 10 sqm., laying of patching material and compacting with 8-10 tonne power road roller including cost of bitumen , aggregate, fuel, lubrication, binder ,hire charges of Machinery, T&P etc.
256
123
31639.04
... More
Providing and laying premixed sand seal coat on patch area comprising of thin application of fine aggregate (0.06 cum/10 sqm) premixed with 6.8kg/10 sqm binder 80/100 grade in mini hot mix plant 6-10 TPH and laying and rolling with power roller 8-10 tonne including all lead of mix material.
256
45
11532.8
... More
Providing and laying granular sub-base material having P.I.not more than 6, including compacted thickness and consolidation by 8-10 tonne power roller at OMC to achieve desired density to required camber and grade including cost of water and hire charges of machinery, including T&P and all lead of material from quarry (compacted thickness to be measured). Grading as per MoRTH specification : Table 400-1, 400-2 with CBR value not less than 15 To achieve 100% Proctor density
10
286
2860
... More
Restoration of rain cuts with soil, morrum, gravel or a mixtrue of these including all leads and lifts and cost of arrangement of land, cleaning the loose soil, benching for 300mm width, laying fresh material in layers not exceeding 250mm and compacting with plate compactor or power rammer to restore the original alignment levels
and slopes complete as per MoRTH specification clause 3002.
37.7
156
5881.2
... More
Providing, laying, spreading and compacting stone aggregate of specific size as per table 400-6 & 400-7 to Water Bound Macadam specification including spreading in uniform thickness, hand packing, rolling with power roller 8-10 tonnes, in stages to proper grade and camber, applying and brooming requisite type of Crushable screening to fill-up the interstices of coarse aggregates, watering (with water browser) and rolling, making necessary earthen bund to protect edegs, lighting, guarding, barricading and maintenance of diversion etc. [MoRTH specification : Clause 404] (by manual means) with all leads (compacted thickness as specified to be measured),Grading no.3 (53-22.4 mm) crusher broken
6.78
971
6585.41
... More
15. A/R to Shelpura from Balada Beawar road Km 0/0 to 1/0
-
-
-
... More
Providing and laying 20 mm thick premix patching with 0.27 cum of stone chipping ( 0.18 cum of 13.2 mm size and 0.09 cum of 11.2 mm size ) mixed with 14.6 kg of straight run bitumen per 10 sqm of road surface including heating of binder and aggregate, cleaning the area of patch, pot holes cut to regular shape with vertical sides, removing all loose & disintegrated material, application of tack coat @ 2.25 kg per 10 sqm., laying of patching material and compacting with 8-10 tonne power road roller including cost of bitumen , aggregate, fuel, lubrication, binder ,hire charges of Machinery, T&P etc.
256
123
31639.04
... More
Providing and laying premixed sand seal coat on patch area comprising of thin application of fine aggregate (0.06 cum/10 sqm) premixed with 6.8kg/10 sqm binder 80/100 grade in mini hot mix plant 6-10 TPH and laying and rolling with power roller 8-10 tonne including all lead of mix material.
256
45
11532.8
... More
Providing and laying granular sub-base material having P.I.not more than 6, including compacted thickness and consolidation by 8-10 tonne power roller at OMC to achieve desired density to required camber and grade including cost of water and hire charges of machinery, including T&P and all lead of material from quarry (compacted thickness to be measured). Grading as per MoRTH specification : Table 400-1, 400-2 with CBR value not less than 15 To achieve 100% Proctor density
10
286
2860
... More
Restoration of rain cuts with soil, morrum, gravel or a mixtrue of these including all leads and lifts and cost of arrangement of land, cleaning the loose soil, benching for 300mm width, laying fresh material in layers not exceeding 250mm and compacting with plate compactor or power rammer to restore the original alignment levels
and slopes complete as per MoRTH specification clause 3002.
37.7
156
5881.2
... More
Providing, laying, spreading and compacting stone aggregate of specific size as per table 400-6 & 400-7 to Water Bound Macadam specification including spreading in uniform thickness, hand packing, rolling with power roller 8-10 tonnes, in stages to proper grade and camber, applying and brooming requisite type of Crushable screening to fill-up the interstices of coarse aggregates, watering (with water browser) and rolling, making necessary earthen bund to protect edegs, lighting, guarding, barricading and maintenance of diversion etc. [MoRTH specification : Clause 404] (by manual means) with all leads (compacted thickness as specified to be measured),Grading no.3 (53-22.4 mm) crusher broken
6.78
971
6585.41
... More
16. A/R to Bhawariya from S.H. 39 Km 0/0 to 3/0
-
-
-
... More
Providing and laying 20 mm thick premix patching with 0.27 cum of stone chipping ( 0.18 cum of 13.2 mm size and 0.09 cum of 11.2 mm size ) mixed with 14.6 kg of straight run bitumen per 10 sqm of road surface including heating of binder and aggregate, cleaning the area of patch, pot holes cut to regular shape with vertical sides, removing all loose & disintegrated material, application of tack coat @ 2.25 kg per 10 sqm., laying of patching material and compacting with 8-10 tonne power road roller including cost of bitumen , aggregate, fuel, lubrication, binder ,hire charges of Machinery, T&P etc.
731.5
123
90406.09
... More
Providing and laying premixed sand seal coat on patch area comprising of thin application of fine aggregate (0.06 cum/10 sqm) premixed with 6.8kg/10 sqm binder 80/100 grade in mini hot mix plant 6-10 TPH and laying and rolling with power roller 8-10 tonne including all lead of mix material.
731.5
45
32954.08
... More
Providing and laying granular sub-base material having P.I.not more than 6, including compacted thickness and consolidation by 8-10 tonne power roller at OMC to achieve desired density to required camber and grade including cost of water and hire charges of machinery, including T&P and all lead of material from quarry (compacted thickness to be measured). Grading as per MoRTH specification : Table 400-1, 400-2 with CBR value not less than 15 To achieve 100% Proctor density
32
286
9152
... More
Restoration of rain cuts with soil, morrum, gravel or a mixtrue of these including all leads and lifts and cost of arrangement of land, cleaning the loose soil, benching for 300mm width, laying fresh material in layers not exceeding 250mm and compacting with plate compactor or power rammer to restore the original alignment levels
and slopes complete as per MoRTH specification clause 3002.
27
156
4212
... More
Providing, laying, spreading and compacting stone aggregate of specific size as per table 400-6 & 400-7 to Water Bound Macadam specification including spreading in uniform thickness, hand packing, rolling with power roller 8-10 tonnes, in stages to proper grade and camber, applying and brooming requisite type of Crushable screening to fill-up the interstices of coarse aggregates, watering (with water browser) and rolling, making necessary earthen bund to protect edegs, lighting, guarding, barricading and maintenance of diversion etc. [MoRTH specification : Clause 404] (by manual means) with all leads (compacted thickness as specified to be measured),Grading no.3 (53-22.4 mm) crusher broken
40
971
38852
... More
17. Pratapgarh to Mohra Km 0/0 to 4/500
-
-
-
... More
Providing and laying 20 mm thick premix patching with 0.27 cum of stone chipping ( 0.18 cum of 13.2 mm size and 0.09 cum of 11.2 mm size ) mixed with 14.6 kg of straight run bitumen per 10 sqm of road surface including heating of binder and aggregate, cleaning the area of patch, pot holes cut to regular shape with vertical sides, removing all loose & disintegrated material, application of tack coat @ 2.25 kg per 10 sqm., laying of patching material and compacting with 8-10 tonne power road roller including cost of bitumen , aggregate, fuel, lubrication, binder ,hire charges of Machinery, T&P etc.
750
123
92692.5
... More
Providing and laying premixed sand seal coat on patch area comprising of thin application of fine aggregate (0.06 cum/10 sqm) premixed with 6.8kg/10 sqm binder 80/100 grade in mini hot mix plant 6-10 TPH and laying and rolling with power roller 8-10 tonne including all lead of mix material.
750
45
33787.5
... More
Providing and laying granular sub-base material having P.I.not more than 6, including compacted thickness and consolidation by 8-10 tonne power roller at OMC to achieve desired density to required camber and grade including cost of water and hire charges of machinery, including T&P and all lead of material from quarry (compacted thickness to be measured). Grading as per MoRTH specification : Table 400-1, 400-2 with CBR value not less than 15 To achieve 100% Proctor density
150
286
42900
... More
Restoration of rain cuts with soil, morrum, gravel or a mixtrue of these including all leads and lifts and cost of arrangement of land, cleaning the loose soil, benching for 300mm width, laying fresh material in layers not exceeding 250mm and compacting with plate compactor or power rammer to restore the original alignment levels
and slopes complete as per MoRTH specification clause 3002.
416
156
64896
... More
Providing, laying, spreading and compacting stone aggregate of specific size as per table 400-6 & 400-7 to Water Bound Macadam specification including spreading in uniform thickness, hand packing, rolling with power roller 8-10 tonnes, in stages to proper grade and camber, applying and brooming requisite type of Crushable screening to fill-up the interstices of coarse aggregates, watering (with water browser) and rolling, making necessary earthen bund to protect edegs, lighting, guarding, barricading and maintenance of diversion etc. [MoRTH specification : Clause 404] (by manual means) with all leads (compacted thickness as specified to be measured),Grading no.3 (53-22.4 mm) crusher broken
30
971
29139
... More
18. Badipole to Jagmaalpura Km 0/0 to 3/0
-
-
-
... More
Providing and laying 20 mm thick premix patching with 0.27 cum of stone chipping ( 0.18 cum of 13.2 mm size and 0.09 cum of 11.2 mm size ) mixed with 14.6 kg of straight run bitumen per 10 sqm of road surface including heating of binder and aggregate, cleaning the area of patch, pot holes cut to regular shape with vertical sides, removing all loose & disintegrated material, application of tack coat @ 2.25 kg per 10 sqm., laying of patching material and compacting with 8-10 tonne power road roller including cost of bitumen , aggregate, fuel, lubrication, binder ,hire charges of Machinery, T&P etc.
731.5
123
90406.09
... More
Providing and laying premixed sand seal coat on patch area comprising of thin application of fine aggregate (0.06 cum/10 sqm) premixed with 6.8kg/10 sqm binder 80/100 grade in mini hot mix plant 6-10 TPH and laying and rolling with power roller 8-10 tonne including all lead of mix material.
731.5
45
32954.08
... More
Providing and laying granular sub-base material having P.I.not more than 6, including compacted thickness and consolidation by 8-10 tonne power roller at OMC to achieve desired density to required camber and grade including cost of water and hire charges of machinery, including T&P and all lead of material from quarry (compacted thickness to be measured). Grading as per MoRTH specification : Table 400-1, 400-2 with CBR value not less than 15 To achieve 100% Proctor density
32
286
9152
... More
Restoration of rain cuts with soil, morrum, gravel or a mixtrue of these including all leads and lifts and cost of arrangement of land, cleaning the loose soil, benching for 300mm width, laying fresh material in layers not exceeding 250mm and compacting with plate compactor or power rammer to restore the original alignment levels
and slopes complete as per MoRTH specification clause 3002.
27
156
4212
... More
Providing, laying, spreading and compacting stone aggregate of specific size as per table 400-6 & 400-7 to Water Bound Macadam specification including spreading in uniform thickness, hand packing, rolling with power roller 8-10 tonnes, in stages to proper grade and camber, applying and brooming requisite type of Crushable screening to fill-up the interstices of coarse aggregates, watering (with water browser) and rolling, making necessary earthen bund to protect edegs, lighting, guarding, barricading and maintenance of diversion etc. [MoRTH specification : Clause 404] (by manual means) with all leads (compacted thickness as specified to be measured),Grading no.3 (53-22.4 mm) crusher broken
40
971
38852
... More
21. A/R to Chainpura Km 0/0 to 1/0
-
-
-
... More
Providing and laying 20 mm thick premix patching with 0.27 cum of stone chipping ( 0.18 cum of 13.2 mm size and 0.09 cum of 11.2 mm size ) mixed with 14.6 kg of straight run bitumen per 10 sqm of road surface including heating of binder and aggregate, cleaning the area of patch, pot holes cut to regular shape with vertical sides, removing all loose & disintegrated material, application of tack coat @ 2.25 kg per 10 sqm., laying of patching material and compacting with 8-10 tonne power road roller including cost of bitumen , aggregate, fuel, lubrication, binder ,hire charges of Machinery, T&P etc.
256
123
31639.04
... More
Providing and laying premixed sand seal coat on patch area comprising of thin application of fine aggregate (0.06 cum/10 sqm) premixed with 6.8kg/10 sqm binder 80/100 grade in mini hot mix plant 6-10 TPH and laying and rolling with power roller 8-10 tonne including all lead of mix material.
256
45
11532.8
... More
Providing and laying granular sub-base material having P.I.not more than 6, including compacted thickness and consolidation by 8-10 tonne power roller at OMC to achieve desired density to required camber and grade including cost of water and hire charges of machinery, including T&P and all lead of material from quarry (compacted thickness to be measured). Grading as per MoRTH specification : Table 400-1, 400-2 with CBR value not less than 15 To achieve 100% Proctor density
10
286
2860
... More
Restoration of rain cuts with soil, morrum, gravel or a mixtrue of these including all leads and lifts and cost of arrangement of land, cleaning the loose soil, benching for 300mm width, laying fresh material in layers not exceeding 250mm and compacting with plate compactor or power rammer to restore the original alignment levels
and slopes complete as per MoRTH specification clause 3002.
37.7
156
5881.2
... More
Providing, laying, spreading and compacting stone aggregate of specific size as per table 400-6 & 400-7 to Water Bound Macadam specification including spreading in uniform thickness, hand packing, rolling with power roller 8-10 tonnes, in stages to proper grade and camber, applying and brooming requisite type of Crushable screening to fill-up the interstices of coarse aggregates, watering (with water browser) and rolling, making necessary earthen bund to protect edegs, lighting, guarding, barricading and maintenance of diversion etc. [MoRTH specification : Clause 404] (by manual means) with all leads (compacted thickness as specified to be measured),Grading no.3 (53-22.4 mm) crusher broken
6.78
971
6585.41
... More
24. Beawar Balada Rd to Kanecha Udawata Km 0/0 to 2/0
-
-
-
... More
Providing and laying 20 mm thick premix patching with 0.27 cum of stone chipping ( 0.18 cum of 13.2 mm size and 0.09 cum of 11.2 mm size ) mixed with 14.6 kg of straight run bitumen per 10 sqm of road surface including heating of binder and aggregate, cleaning the area of patch, pot holes cut to regular shape with vertical sides, removing all loose & disintegrated material, application of tack coat @ 2.25 kg per 10 sqm., laying of patching material and compacting with 8-10 tonne power road roller including cost of bitumen , aggregate, fuel, lubrication, binder ,hire charges of Machinery, T&P etc.
540
123
66738.6
... More
Providing and laying premixed sand seal coat on patch area comprising of thin application of fine aggregate (0.06 cum/10 sqm) premixed with 6.8kg/10 sqm binder 80/100 grade in mini hot mix plant 6-10 TPH and laying and rolling with power roller 8-10 tonne including all lead of mix material.
540
45
24327
... More
Providing and laying granular sub-base material having P.I.not more than 6, including compacted thickness and consolidation by 8-10 tonne power roller at OMC to achieve desired density to required camber and grade including cost of water and hire charges of machinery, including T&P and all lead of material from quarry (compacted thickness to be measured). Grading as per MoRTH specification : Table 400-1, 400-2 with CBR value not less than 15 To achieve 100% Proctor density
25
286
7150
... More
Restoration of rain cuts with soil, morrum, gravel or a mixtrue of these including all leads and lifts and cost of arrangement of land, cleaning the loose soil, benching for 300mm width, laying fresh material in layers not exceeding 250mm and compacting with plate compactor or power rammer to restore the original alignment levels
and slopes complete as per MoRTH specification clause 3002.
30
156
4680
... More
Providing, laying, spreading and compacting stone aggregate of specific size as per table 400-6 & 400-7 to Water Bound Macadam specification including spreading in uniform thickness, hand packing, rolling with power roller 8-10 tonnes, in stages to proper grade and camber, applying and brooming requisite type of Crushable screening to fill-up the interstices of coarse aggregates, watering (with water browser) and rolling, making necessary earthen bund to protect edegs, lighting, guarding, barricading and maintenance of diversion etc. [MoRTH specification : Clause 404] (by manual means) with all leads (compacted thickness as specified to be measured),Grading no.3 (53-22.4 mm) crusher broken
14.5
971
14083.85
... More
25. A/R to Deoli Khurd from Beawar Blada Road Km 0/0 to 1/0
-
-
-
... More
Providing and laying 20 mm thick premix patching with 0.27 cum of stone chipping ( 0.18 cum of 13.2 mm size and 0.09 cum of 11.2 mm size ) mixed with 14.6 kg of straight run bitumen per 10 sqm of road surface including heating of binder and aggregate, cleaning the area of patch, pot holes cut to regular shape with vertical sides, removing all loose & disintegrated material, application of tack coat @ 2.25 kg per 10 sqm., laying of patching material and compacting with 8-10 tonne power road roller including cost of bitumen , aggregate, fuel, lubrication, binder ,hire charges of Machinery, T&P etc.
256
123
31639.04
... More
Providing and laying premixed sand seal coat on patch area comprising of thin application of fine aggregate (0.06 cum/10 sqm) premixed with 6.8kg/10 sqm binder 80/100 grade in mini hot mix plant 6-10 TPH and laying and rolling with power roller 8-10 tonne including all lead of mix material.
256
45
11532.8
... More
Providing and laying granular sub-base material having P.I.not more than 6, including compacted thickness and consolidation by 8-10 tonne power roller at OMC to achieve desired density to required camber and grade including cost of water and hire charges of machinery, including T&P and all lead of material from quarry (compacted thickness to be measured). Grading as per MoRTH specification : Table 400-1, 400-2 with CBR value not less than 15 To achieve 100% Proctor density
10
286
2860
... More
Restoration of rain cuts with soil, morrum, gravel or a mixtrue of these including all leads and lifts and cost of arrangement of land, cleaning the loose soil, benching for 300mm width, laying fresh material in layers not exceeding 250mm and compacting with plate compactor or power rammer to restore the original alignment levels
and slopes complete as per MoRTH specification clause 3002.
37.7
156
5881.2
... More
Providing, laying, spreading and compacting stone aggregate of specific size as per table 400-6 & 400-7 to Water Bound Macadam specification including spreading in uniform thickness, hand packing, rolling with power roller 8-10 tonnes, in stages to proper grade and camber, applying and brooming requisite type of Crushable screening to fill-up the interstices of coarse aggregates, watering (with water browser) and rolling, making necessary earthen bund to protect edegs, lighting, guarding, barricading and maintenance of diversion etc. [MoRTH specification : Clause 404] (by manual means) with all leads (compacted thickness as specified to be measured),Grading no.3 (53-22.4 mm) crusher broken
6.78
971
6585.41
... More
29. Patan to Babra Km 0/0 to 4/500
-
-
-
... More
Providing and laying 20 mm thick premix patching with 0.27 cum of stone chipping ( 0.18 cum of 13.2 mm size and 0.09 cum of 11.2 mm size ) mixed with 14.6 kg of straight run bitumen per 10 sqm of road surface including heating of binder and aggregate, cleaning the area of patch, pot holes cut to regular shape with vertical sides, removing all loose & disintegrated material, application of tack coat @ 2.25 kg per 10 sqm., laying of patching material and compacting with 8-10 tonne power road roller including cost of bitumen , aggregate, fuel, lubrication, binder ,hire charges of Machinery, T&P etc.
750
123
92692.5
... More
Providing and laying premixed sand seal coat on patch area comprising of thin application of fine aggregate (0.06 cum/10 sqm) premixed with 6.8kg/10 sqm binder 80/100 grade in mini hot mix plant 6-10 TPH and laying and rolling with power roller 8-10 tonne including all lead of mix material.
750
45
33787.5
... More
Providing and laying granular sub-base material having P.I.not more than 6, including compacted thickness and consolidation by 8-10 tonne power roller at OMC to achieve desired density to required camber and grade including cost of water and hire charges of machinery, including T&P and all lead of material from quarry (compacted thickness to be measured). Grading as per MoRTH specification : Table 400-1, 400-2 with CBR value not less than 15 To achieve 100% Proctor density
150
286
42900
... More
Restoration of rain cuts with soil, morrum, gravel or a mixtrue of these including all leads and lifts and cost of arrangement of land, cleaning the loose soil, benching for 300mm width, laying fresh material in layers not exceeding 250mm and compacting with plate compactor or power rammer to restore the original alignment levels
and slopes complete as per MoRTH specification clause 3002.
416
156
64896
... More
Providing, laying, spreading and compacting stone aggregate of specific size as per table 400-6 & 400-7 to Water Bound Macadam specification including spreading in uniform thickness, hand packing, rolling with power roller 8-10 tonnes, in stages to proper grade and camber, applying and brooming requisite type of Crushable screening to fill-up the interstices of coarse aggregates, watering (with water browser) and rolling, making necessary earthen bund to protect edegs, lighting, guarding, barricading and maintenance of diversion etc. [MoRTH specification : Clause 404] (by manual means) with all leads (compacted thickness as specified to be measured),Grading no.3 (53-22.4 mm) crusher broken
30
971
29139
... More
32. Kanuja Ujenwas Boya Nadi km 0/0 to 2/500
-
-
-
... More
Providing and laying 20 mm thick premix patching with 0.27 cum of stone chipping ( 0.18 cum of 13.2 mm size and 0.09 cum of 11.2 mm size ) mixed with 14.6 kg of straight run bitumen per 10 sqm of road surface including heating of binder and aggregate, cleaning the area of patch, pot holes cut to regular shape with vertical sides, removing all loose & disintegrated material, application of tack coat @ 2.25 kg per 10 sqm., laying of patching material and compacting with 8-10 tonne power road roller including cost of bitumen , aggregate, fuel, lubrication, binder ,hire charges of Machinery, T&P etc.
562.5
123
69519.38
... More
Providing and laying premixed sand seal coat on patch area comprising of thin application of fine aggregate (0.06 cum/10 sqm) premixed with 6.8kg/10 sqm binder 80/100 grade in mini hot mix plant 6-10 TPH and laying and rolling with power roller 8-10 tonne including all lead of mix material.
562.5
45
25340.63
... More
Providing and laying granular sub-base material having P.I.not more than 6, including compacted thickness and consolidation by 8-10 tonne power roller at OMC to achieve desired density to required camber and grade including cost of water and hire charges of machinery, including T&P and all lead of material from quarry (compacted thickness to be measured). Grading as per MoRTH specification : Table 400-1, 400-2 with CBR value not less than 15 To achieve 100% Proctor density
73
286
20878
... More
Restoration of rain cuts with soil, morrum, gravel or a mixtrue of these including all leads and lifts and cost of arrangement of land, cleaning the loose soil, benching for 300mm width, laying fresh material in layers not exceeding 250mm and compacting with plate compactor or power rammer to restore the original alignment levels
and slopes complete as per MoRTH specification clause 3002.
40
156
6240
... More
Providing, laying, spreading and compacting stone aggregate of specific size as per table 400-6 & 400-7 to Water Bound Macadam specification including spreading in uniform thickness, hand packing, rolling with power roller 8-10 tonnes, in stages to proper grade and camber, applying and brooming requisite type of Crushable screening to fill-up the interstices of coarse aggregates, watering (with water browser) and rolling, making necessary earthen bund to protect edegs, lighting, guarding, barricading and maintenance of diversion etc. [MoRTH specification : Clause 404] (by manual means) with all leads (compacted thickness as specified to be measured),Grading no.3 (53-22.4 mm) crusher broken
25
971
24282.5
... More
40. Kalab kalla to Banna ki Nadi0/0 to 2/0
-
-
-
... More
Providing and laying 20 mm thick premix patching with 0.27 cum of stone chipping ( 0.18 cum of 13.2 mm size and 0.09 cum of 11.2 mm size ) mixed with 14.6 kg of straight run bitumen per 10 sqm of road surface including heating of binder and aggregate, cleaning the area of patch, pot holes cut to regular shape with vertical sides, removing all loose & disintegrated material, application of tack coat @ 2.25 kg per 10 sqm., laying of patching material and compacting with 8-10 tonne power road roller including cost of bitumen , aggregate, fuel, lubrication, binder ,hire charges of Machinery, T&P etc.
540
123
66738.6
... More
Providing and laying premixed sand seal coat on patch area comprising of thin application of fine aggregate (0.06 cum/10 sqm) premixed with 6.8kg/10 sqm binder 80/100 grade in mini hot mix plant 6-10 TPH and laying and rolling with power roller 8-10 tonne including all lead of mix material.
540
45
24327
... More
Providing and laying granular sub-base material having P.I.not more than 6, including compacted thickness and consolidation by 8-10 tonne power roller at OMC to achieve desired density to required camber and grade including cost of water and hire charges of machinery, including T&P and all lead of material from quarry (compacted thickness to be measured). Grading as per MoRTH specification : Table 400-1, 400-2 with CBR value not less than 15 To achieve 100% Proctor density
25
286
7150
... More
Restoration of rain cuts with soil, morrum, gravel or a mixtrue of these including all leads and lifts and cost of arrangement of land, cleaning the loose soil, benching for 300mm width, laying fresh material in layers not exceeding 250mm and compacting with plate compactor or power rammer to restore the original alignment levels
and slopes complete as per MoRTH specification clause 3002.
30
156
4680
... More
Providing, laying, spreading and compacting stone aggregate of specific size as per table 400-6 & 400-7 to Water Bound Macadam specification including spreading in uniform thickness, hand packing, rolling with power roller 8-10 tonnes, in stages to proper grade and camber, applying and brooming requisite type of Crushable screening to fill-up the interstices of coarse aggregates, watering (with water browser) and rolling, making necessary earthen bund to protect edegs, lighting, guarding, barricading and maintenance of diversion etc. [MoRTH specification : Clause 404] (by manual means) with all leads (compacted thickness as specified to be measured),Grading no.3 (53-22.4 mm) crusher broken
14.5
971
14083.85
... More
41. A/R to Karanpura Km 0/0 to 1/0
-
-
-
... More
Providing and laying 20 mm thick premix patching with 0.27 cum of stone chipping ( 0.18 cum of 13.2 mm size and 0.09 cum of 11.2 mm size ) mixed with 14.6 kg of straight run bitumen per 10 sqm of road surface including heating of binder and aggregate, cleaning the area of patch, pot holes cut to regular shape with vertical sides, removing all loose & disintegrated material, application of tack coat @ 2.25 kg per 10 sqm., laying of patching material and compacting with 8-10 tonne power road roller including cost of bitumen , aggregate, fuel, lubrication, binder ,hire charges of Machinery, T&P etc.
256
123
31639.04
... More
Providing and laying premixed sand seal coat on patch area comprising of thin application of fine aggregate (0.06 cum/10 sqm) premixed with 6.8kg/10 sqm binder 80/100 grade in mini hot mix plant 6-10 TPH and laying and rolling with power roller 8-10 tonne including all lead of mix material.
256
45
11532.8
... More
Providing and laying granular sub-base material having P.I.not more than 6, including compacted thickness and consolidation by 8-10 tonne power roller at OMC to achieve desired density to required camber and grade including cost of water and hire charges of machinery, including T&P and all lead of material from quarry (compacted thickness to be measured). Grading as per MoRTH specification : Table 400-1, 400-2 with CBR value not less than 15 To achieve 100% Proctor density
10
286
2860
... More
Restoration of rain cuts with soil, morrum, gravel or a mixtrue of these including all leads and lifts and cost of arrangement of land, cleaning the loose soil, benching for 300mm width, laying fresh material in layers not exceeding 250mm and compacting with plate compactor or power rammer to restore the original alignment levels
and slopes complete as per MoRTH specification clause 3002.
37.7
156
5881.2
... More
Providing, laying, spreading and compacting stone aggregate of specific size as per table 400-6 & 400-7 to Water Bound Macadam specification including spreading in uniform thickness, hand packing, rolling with power roller 8-10 tonnes, in stages to proper grade and camber, applying and brooming requisite type of Crushable screening to fill-up the interstices of coarse aggregates, watering (with water browser) and rolling, making necessary earthen bund to protect edegs, lighting, guarding, barricading and maintenance of diversion etc. [MoRTH specification : Clause 404] (by manual means) with all leads (compacted thickness as specified to be measured),Grading no.3 (53-22.4 mm) crusher broken
6.78
971
6585.41
... More
46. Chang to Kalali ka Badiya Km 0/0 to 0/700
-
-
-
... More
Providing and laying 20 mm thick premix patching with 0.27 cum of stone chipping ( 0.18 cum of 13.2 mm size and 0.09 cum of 11.2 mm size ) mixed with 14.6 kg of straight run bitumen per 10 sqm of road surface including heating of binder and aggregate, cleaning the area of patch, pot holes cut to regular shape with vertical sides, removing all loose & disintegrated material, application of tack coat @ 2.25 kg per 10 sqm., laying of patching material and compacting with 8-10 tonne power road roller including cost of bitumen , aggregate, fuel, lubrication, binder ,hire charges of Machinery, T&P etc.
148
123
18291.32
... More
Providing and laying premixed sand seal coat on patch area comprising of thin application of fine aggregate (0.06 cum/10 sqm) premixed with 6.8kg/10 sqm binder 80/100 grade in mini hot mix plant 6-10 TPH and laying and rolling with power roller 8-10 tonne including all lead of mix material.
148
45
6667.4
... More
Providing and laying granular sub-base material having P.I.not more than 6, including compacted thickness and consolidation by 8-10 tonne power roller at OMC to achieve desired density to required camber and grade including cost of water and hire charges of machinery, including T&P and all lead of material from quarry (compacted thickness to be measured). Grading as per MoRTH specification : Table 400-1, 400-2 with CBR value not less than 15 To achieve 100% Proctor density
10
286
2860
... More
Restoration of rain cuts with soil, morrum, gravel or a mixtrue of these including all leads and lifts and cost of arrangement of land, cleaning the loose soil, benching for 300mm width, laying fresh material in layers not exceeding 250mm and compacting with plate compactor or power rammer to restore the original alignment levels
and slopes complete as per MoRTH specification clause 3002.
40.6
156
6333.6
... More
Providing, laying, spreading and compacting stone aggregate of specific size as per table 400-6 & 400-7 to Water Bound Macadam specification including spreading in uniform thickness, hand packing, rolling with power roller 8-10 tonnes, in stages to proper grade and camber, applying and brooming requisite type of Crushable screening to fill-up the interstices of coarse aggregates, watering (with water browser) and rolling, making necessary earthen bund to protect edegs, lighting, guarding, barricading and maintenance of diversion etc. [MoRTH specification : Clause 404] (by manual means) with all leads (compacted thickness as specified to be measured),Grading no.3 (53-22.4 mm) crusher broken
6.78
971
6585.41
... More
47. Ramgarh to Ghati Nichla Badiya Km 0/0 to 1/0
-
-
-
... More
Providing and laying 20 mm thick premix patching with 0.27 cum of stone chipping ( 0.18 cum of 13.2 mm size and 0.09 cum of 11.2 mm size ) mixed with 14.6 kg of straight run bitumen per 10 sqm of road surface including heating of binder and aggregate, cleaning the area of patch, pot holes cut to regular shape with vertical sides, removing all loose & disintegrated material, application of tack coat @ 2.25 kg per 10 sqm., laying of patching material and compacting with 8-10 tonne power road roller including cost of bitumen , aggregate, fuel, lubrication, binder ,hire charges of Machinery, T&P etc.
256
123
31639.04
... More
Providing and laying premixed sand seal coat on patch area comprising of thin application of fine aggregate (0.06 cum/10 sqm) premixed with 6.8kg/10 sqm binder 80/100 grade in mini hot mix plant 6-10 TPH and laying and rolling with power roller 8-10 tonne including all lead of mix material.
256
45
11532.8
... More
Providing and laying granular sub-base material having P.I.not more than 6, including compacted thickness and consolidation by 8-10 tonne power roller at OMC to achieve desired density to required camber and grade including cost of water and hire charges of machinery, including T&P and all lead of material from quarry (compacted thickness to be measured). Grading as per MoRTH specification : Table 400-1, 400-2 with CBR value not less than 15 To achieve 100% Proctor density
10
286
2860
... More
Restoration of rain cuts with soil, morrum, gravel or a mixtrue of these including all leads and lifts and cost of arrangement of land, cleaning the loose soil, benching for 300mm width, laying fresh material in layers not exceeding 250mm and compacting with plate compactor or power rammer to restore the original alignment levels
and slopes complete as per MoRTH specification clause 3002.
37.7
156
5881.2
... More
Providing, laying, spreading and compacting stone aggregate of specific size as per table 400-6 & 400-7 to Water Bound Macadam specification including spreading in uniform thickness, hand packing, rolling with power roller 8-10 tonnes, in stages to proper grade and camber, applying and brooming requisite type of Crushable screening to fill-up the interstices of coarse aggregates, watering (with water browser) and rolling, making necessary earthen bund to protect edegs, lighting, guarding, barricading and maintenance of diversion etc. [MoRTH specification : Clause 404] (by manual means) with all leads (compacted thickness as specified to be measured),Grading no.3 (53-22.4 mm) crusher broken
6.78
971
6585.41
... More
48. Sumel to Shyampura Km 0/0 to 1/0
-
-
-
... More
Providing and laying 20 mm thick premix patching with 0.27 cum of stone chipping ( 0.18 cum of 13.2 mm size and 0.09 cum of 11.2 mm size ) mixed with 14.6 kg of straight run bitumen per 10 sqm of road surface including heating of binder and aggregate, cleaning the area of patch, pot holes cut to regular shape with vertical sides, removing all loose & disintegrated material, application of tack coat @ 2.25 kg per 10 sqm., laying of patching material and compacting with 8-10 tonne power road roller including cost of bitumen , aggregate, fuel, lubrication, binder ,hire charges of Machinery, T&P etc.
256
123
31639.04
... More
Providing and laying premixed sand seal coat on patch area comprising of thin application of fine aggregate (0.06 cum/10 sqm) premixed with 6.8kg/10 sqm binder 80/100 grade in mini hot mix plant 6-10 TPH and laying and rolling with power roller 8-10 tonne including all lead of mix material.
256
45
11532.8
... More
Providing and laying granular sub-base material having P.I.not more than 6, including compacted thickness and consolidation by 8-10 tonne power roller at OMC to achieve desired density to required camber and grade including cost of water and hire charges of machinery, including T&P and all lead of material from quarry (compacted thickness to be measured). Grading as per MoRTH specification : Table 400-1, 400-2 with CBR value not less than 15 To achieve 100% Proctor density
10
286
2860
... More
Restoration of rain cuts with soil, morrum, gravel or a mixtrue of these including all leads and lifts and cost of arrangement of land, cleaning the loose soil, benching for 300mm width, laying fresh material in layers not exceeding 250mm and compacting with plate compactor or power rammer to restore the original alignment levels
and slopes complete as per MoRTH specification clause 3002.
37.7
156
5881.2
... More
Providing, laying, spreading and compacting stone aggregate of specific size as per table 400-6 & 400-7 to Water Bound Macadam specification including spreading in uniform thickness, hand packing, rolling with power roller 8-10 tonnes, in stages to proper grade and camber, applying and brooming requisite type of Crushable screening to fill-up the interstices of coarse aggregates, watering (with water browser) and rolling, making necessary earthen bund to protect edegs, lighting, guarding, barricading and maintenance of diversion etc. [MoRTH specification : Clause 404] (by manual means) with all leads (compacted thickness as specified to be measured),Grading no.3 (53-22.4 mm) crusher broken
6.78
971
6585.41
... More
49. Pratapgarh to Rajputon ki Dhani km 0/0 to 0/700
-
-
-
... More
Providing and laying 20 mm thick premix patching with 0.27 cum of stone chipping ( 0.18 cum of 13.2 mm size and 0.09 cum of 11.2 mm size ) mixed with 14.6 kg of straight run bitumen per 10 sqm of road surface including heating of binder and aggregate, cleaning the area of patch, pot holes cut to regular shape with vertical sides, removing all loose & disintegrated material, application of tack coat @ 2.25 kg per 10 sqm., laying of patching material and compacting with 8-10 tonne power road roller including cost of bitumen , aggregate, fuel, lubrication, binder ,hire charges of Machinery, T&P etc.
148
123
18291.32
... More
Providing and laying premixed sand seal coat on patch area comprising of thin application of fine aggregate (0.06 cum/10 sqm) premixed with 6.8kg/10 sqm binder 80/100 grade in mini hot mix plant 6-10 TPH and laying and rolling with power roller 8-10 tonne including all lead of mix material.
148
45
6667.4
... More
Providing and laying granular sub-base material having P.I.not more than 6, including compacted thickness and consolidation by 8-10 tonne power roller at OMC to achieve desired density to required camber and grade including cost of water and hire charges of machinery, including T&P and all lead of material from quarry (compacted thickness to be measured). Grading as per MoRTH specification : Table 400-1, 400-2 with CBR value not less than 15 To achieve 100% Proctor density
10
286
2860
... More
Restoration of rain cuts with soil, morrum, gravel or a mixtrue of these including all leads and lifts and cost of arrangement of land, cleaning the loose soil, benching for 300mm width, laying fresh material in layers not exceeding 250mm and compacting with plate compactor or power rammer to restore the original alignment levels
and slopes complete as per MoRTH specification clause 3002.
40.6
156
6333.6
... More
Providing, laying, spreading and compacting stone aggregate of specific size as per table 400-6 & 400-7 to Water Bound Macadam specification including spreading in uniform thickness, hand packing, rolling with power roller 8-10 tonnes, in stages to proper grade and camber, applying and brooming requisite type of Crushable screening to fill-up the interstices of coarse aggregates, watering (with water browser) and rolling, making necessary earthen bund to protect edegs, lighting, guarding, barricading and maintenance of diversion etc. [MoRTH specification : Clause 404] (by manual means) with all leads (compacted thickness as specified to be measured),Grading no.3 (53-22.4 mm) crusher broken
6.78
971
6585.41
... More
50. Kalab Kalla to Dholla Danta Km 0/0 to 1/500
-
-
-
... More
Providing and laying 20 mm thick premix patching with 0.27 cum of stone chipping ( 0.18 cum of 13.2 mm size and 0.09 cum of 11.2 mm size ) mixed with 14.6 kg of straight run bitumen per 10 sqm of road surface including heating of binder and aggregate, cleaning the area of patch, pot holes cut to regular shape with vertical sides, removing all loose & disintegrated material, application of tack coat @ 2.25 kg per 10 sqm., laying of patching material and compacting with 8-10 tonne power road roller including cost of bitumen , aggregate, fuel, lubrication, binder ,hire charges of Machinery, T&P etc.
332.22
123
41059.07
... More
Providing and laying premixed sand seal coat on patch area comprising of thin application of fine aggregate (0.06 cum/10 sqm) premixed with 6.8kg/10 sqm binder 80/100 grade in mini hot mix plant 6-10 TPH and laying and rolling with power roller 8-10 tonne including all lead of mix material.
332.22
45
14966.51
... More
Providing and laying granular sub-base material having P.I.not more than 6, including compacted thickness and consolidation by 8-10 tonne power roller at OMC to achieve desired density to required camber and grade including cost of water and hire charges of machinery, including T&P and all lead of material from quarry (compacted thickness to be measured). Grading as per MoRTH specification : Table 400-1, 400-2 with CBR value not less than 15 To achieve 100% Proctor density
46
286
13156
... More
Restoration of rain cuts with soil, morrum, gravel or a mixtrue of these including all leads and lifts and cost of arrangement of land, cleaning the loose soil, benching for 300mm width, laying fresh material in layers not exceeding 250mm and compacting with plate compactor or power rammer to restore the original alignment levels
and slopes complete as per MoRTH specification clause 3002.
24.24
156
3781.44
... More
Providing, laying, spreading and compacting stone aggregate of specific size as per table 400-6 & 400-7 to Water Bound Macadam specification including spreading in uniform thickness, hand packing, rolling with power roller 8-10 tonnes, in stages to proper grade and camber, applying and brooming requisite type of Crushable screening to fill-up the interstices of coarse aggregates, watering (with water browser) and rolling, making necessary earthen bund to protect edegs, lighting, guarding, barricading and maintenance of diversion etc. [MoRTH specification : Clause 404] (by manual means) with all leads (compacted thickness as specified to be measured),Grading no.3 (53-22.4 mm) crusher broken
15.1
971
14666.63
... More
51.Sumel to Rampura 0/0 to 2/500
-
-
-
... More
Providing and laying 20 mm thick premix patching with 0.27 cum of stone chipping ( 0.18 cum of 13.2 mm size and 0.09 cum of 11.2 mm size ) mixed with 14.6 kg of straight run bitumen per 10 sqm of road surface including heating of binder and aggregate, cleaning the area of patch, pot holes cut to regular shape with vertical sides, removing all loose & disintegrated material, application of tack coat @ 2.25 kg per 10 sqm., laying of patching material and compacting with 8-10 tonne power road roller including cost of bitumen , aggregate, fuel, lubrication, binder ,hire charges of Machinery, T&P etc.
562.5
123
69519.38
... More
Providing and laying premixed sand seal coat on patch area comprising of thin application of fine aggregate (0.06 cum/10 sqm) premixed with 6.8kg/10 sqm binder 80/100 grade in mini hot mix plant 6-10 TPH and laying and rolling with power roller 8-10 tonne including all lead of mix material.
562.5
45
25340.63
... More
Providing and laying granular sub-base material having P.I.not more than 6, including compacted thickness and consolidation by 8-10 tonne power roller at OMC to achieve desired density to required camber and grade including cost of water and hire charges of machinery, including T&P and all lead of material from quarry (compacted thickness to be measured). Grading as per MoRTH specification : Table 400-1, 400-2 with CBR value not less than 15 To achieve 100% Proctor density
73
286
20878
... More
Restoration of rain cuts with soil, morrum, gravel or a mixtrue of these including all leads and lifts and cost of arrangement of land, cleaning the loose soil, benching for 300mm width, laying fresh material in layers not exceeding 250mm and compacting with plate compactor or power rammer to restore the original alignment levels
and slopes complete as per MoRTH specification clause 3002.
40
156
6240
... More
Providing, laying, spreading and compacting stone aggregate of specific size as per table 400-6 & 400-7 to Water Bound Macadam specification including spreading in uniform thickness, hand packing, rolling with power roller 8-10 tonnes, in stages to proper grade and camber, applying and brooming requisite type of Crushable screening to fill-up the interstices of coarse aggregates, watering (with water browser) and rolling, making necessary earthen bund to protect edegs, lighting, guarding, barricading and maintenance of diversion etc. [MoRTH specification : Clause 404] (by manual means) with all leads (compacted thickness as specified to be measured),Grading no.3 (53-22.4 mm) crusher broken
25
971
24282.5
... More
52. Rawaniya to Shri Nagar Km 0/0 to 1/0
-
-
-
... More
Providing and laying 20 mm thick premix patching with 0.27 cum of stone chipping ( 0.18 cum of 13.2 mm size and 0.09 cum of 11.2 mm size ) mixed with 14.6 kg of straight run bitumen per 10 sqm of road surface including heating of binder and aggregate, cleaning the area of patch, pot holes cut to regular shape with vertical sides, removing all loose & disintegrated material, application of tack coat @ 2.25 kg per 10 sqm., laying of patching material and compacting with 8-10 tonne power road roller including cost of bitumen , aggregate, fuel, lubrication, binder ,hire charges of Machinery, T&P etc.
256
123
31639.04
... More
Providing and laying premixed sand seal coat on patch area comprising of thin application of fine aggregate (0.06 cum/10 sqm) premixed with 6.8kg/10 sqm binder 80/100 grade in mini hot mix plant 6-10 TPH and laying and rolling with power roller 8-10 tonne including all lead of mix material.
256
45
11532.8
... More
Providing and laying granular sub-base material having P.I.not more than 6, including compacted thickness and consolidation by 8-10 tonne power roller at OMC to achieve desired density to required camber and grade including cost of water and hire charges of machinery, including T&P and all lead of material from quarry (compacted thickness to be measured). Grading as per MoRTH specification : Table 400-1, 400-2 with CBR value not less than 15 To achieve 100% Proctor density
10
286
2860
... More
Restoration of rain cuts with soil, morrum, gravel or a mixtrue of these including all leads and lifts and cost of arrangement of land, cleaning the loose soil, benching for 300mm width, laying fresh material in layers not exceeding 250mm and compacting with plate compactor or power rammer to restore the original alignment levels
and slopes complete as per MoRTH specification clause 3002.
37.7
156
5881.2
... More
Providing, laying, spreading and compacting stone aggregate of specific size as per table 400-6 & 400-7 to Water Bound Macadam specification including spreading in uniform thickness, hand packing, rolling with power roller 8-10 tonnes, in stages to proper grade and camber, applying and brooming requisite type of Crushable screening to fill-up the interstices of coarse aggregates, watering (with water browser) and rolling, making necessary earthen bund to protect edegs, lighting, guarding, barricading and maintenance of diversion etc. [MoRTH specification : Clause 404] (by manual means) with all leads (compacted thickness as specified to be measured),Grading no.3 (53-22.4 mm) crusher broken
6.78
971
6585.41
... More
54.Relra Beawar road to Shyampura Km 0/0 to 2/0
-
-
-
... More
Providing and laying 20 mm thick premix patching with 0.27 cum of stone chipping ( 0.18 cum of 13.2 mm size and 0.09 cum of 11.2 mm size ) mixed with 14.6 kg of straight run bitumen per 10 sqm of road surface including heating of binder and aggregate, cleaning the area of patch, pot holes cut to regular shape with vertical sides, removing all loose & disintegrated material, application of tack coat @ 2.25 kg per 10 sqm., laying of patching material and compacting with 8-10 tonne power road roller including cost of bitumen , aggregate, fuel, lubrication, binder ,hire charges of Machinery, T&P etc.
540
123
66738.6
... More
Providing and laying premixed sand seal coat on patch area comprising of thin application of fine aggregate (0.06 cum/10 sqm) premixed with 6.8kg/10 sqm binder 80/100 grade in mini hot mix plant 6-10 TPH and laying and rolling with power roller 8-10 tonne including all lead of mix material.
540
45
24327
... More
Providing and laying granular sub-base material having P.I.not more than 6, including compacted thickness and consolidation by 8-10 tonne power roller at OMC to achieve desired density to required camber and grade including cost of water and hire charges of machinery, including T&P and all lead of material from quarry (compacted thickness to be measured). Grading as per MoRTH specification : Table 400-1, 400-2 with CBR value not less than 15 To achieve 100% Proctor density
25
286
7150
... More
Restoration of rain cuts with soil, morrum, gravel or a mixtrue of these including all leads and lifts and cost of arrangement of land, cleaning the loose soil, benching for 300mm width, laying fresh material in layers not exceeding 250mm and compacting with plate compactor or power rammer to restore the original alignment levels
and slopes complete as per MoRTH specification clause 3002.
30
156
4680
... More
Providing, laying, spreading and compacting stone aggregate of specific size as per table 400-6 & 400-7 to Water Bound Macadam specification including spreading in uniform thickness, hand packing, rolling with power roller 8-10 tonnes, in stages to proper grade and camber, applying and brooming requisite type of Crushable screening to fill-up the interstices of coarse aggregates, watering (with water browser) and rolling, making necessary earthen bund to protect edegs, lighting, guarding, barricading and maintenance of diversion etc. [MoRTH specification : Clause 404] (by manual means) with all leads (compacted thickness as specified to be measured),Grading no.3 (53-22.4 mm) crusher broken
14.5
971
14083.85
... More
55. Kalaliya to Distt Border Km 0/0 to 1/0
-
-
-
... More
Providing and laying 20 mm thick premix patching with 0.27 cum of stone chipping ( 0.18 cum of 13.2 mm size and 0.09 cum of 11.2 mm size ) mixed with 14.6 kg of straight run bitumen per 10 sqm of road surface including heating of binder and aggregate, cleaning the area of patch, pot holes cut to regular shape with vertical sides, removing all loose & disintegrated material, application of tack coat @ 2.25 kg per 10 sqm., laying of patching material and compacting with 8-10 tonne power road roller including cost of bitumen , aggregate, fuel, lubrication, binder ,hire charges of Machinery, T&P etc.
256
123
31639.04
... More
Providing and laying premixed sand seal coat on patch area comprising of thin application of fine aggregate (0.06 cum/10 sqm) premixed with 6.8kg/10 sqm binder 80/100 grade in mini hot mix plant 6-10 TPH and laying and rolling with power roller 8-10 tonne including all lead of mix material.
256
45
11532.8
... More
Providing and laying granular sub-base material having P.I.not more than 6, including compacted thickness and consolidation by 8-10 tonne power roller at OMC to achieve desired density to required camber and grade including cost of water and hire charges of machinery, including T&P and all lead of material from quarry (compacted thickness to be measured). Grading as per MoRTH specification : Table 400-1, 400-2 with CBR value not less than 15 To achieve 100% Proctor density
10
286
2860
... More
Restoration of rain cuts with soil, morrum, gravel or a mixtrue of these including all leads and lifts and cost of arrangement of land, cleaning the loose soil, benching for 300mm width, laying fresh material in layers not exceeding 250mm and compacting with plate compactor or power rammer to restore the original alignment levels
and slopes complete as per MoRTH specification clause 3002.
37.7
156
5881.2
... More
Providing, laying, spreading and compacting stone aggregate of specific size as per table 400-6 & 400-7 to Water Bound Macadam specification including spreading in uniform thickness, hand packing, rolling with power roller 8-10 tonnes, in stages to proper grade and camber, applying and brooming requisite type of Crushable screening to fill-up the interstices of coarse aggregates, watering (with water browser) and rolling, making necessary earthen bund to protect edegs, lighting, guarding, barricading and maintenance of diversion etc. [MoRTH specification : Clause 404] (by manual means) with all leads (compacted thickness as specified to be measured),Grading no.3 (53-22.4 mm) crusher broken
6.78
971
6585.41
... More
56. Sendra to Sejo ki Beri Mundo ki Mor Km 0/0 to 1/500
-
-
-
... More
Providing and laying 20 mm thick premix patching with 0.27 cum of stone chipping ( 0.18 cum of 13.2 mm size and 0.09 cum of 11.2 mm size ) mixed with 14.6 kg of straight run bitumen per 10 sqm of road surface including heating of binder and aggregate, cleaning the area of patch, pot holes cut to regular shape with vertical sides, removing all loose & disintegrated material, application of tack coat @ 2.25 kg per 10 sqm., laying of patching material and compacting with 8-10 tonne power road roller including cost of bitumen , aggregate, fuel, lubrication, binder ,hire charges of Machinery, T&P etc.
337.5
123
41711.63
... More
Providing and laying premixed sand seal coat on patch area comprising of thin application of fine aggregate (0.06 cum/10 sqm) premixed with 6.8kg/10 sqm binder 80/100 grade in mini hot mix plant 6-10 TPH and laying and rolling with power roller 8-10 tonne including all lead of mix material.
337.5
45
15204.38
... More
Providing and laying granular sub-base material having P.I.not more than 6, including compacted thickness and consolidation by 8-10 tonne power roller at OMC to achieve desired density to required camber and grade including cost of water and hire charges of machinery, including T&P and all lead of material from quarry (compacted thickness to be measured). Grading as per MoRTH specification : Table 400-1, 400-2 with CBR value not less than 15 To achieve 100% Proctor density
46
286
13156
... More
Restoration of rain cuts with soil, morrum, gravel or a mixtrue of these including all leads and lifts and cost of arrangement of land, cleaning the loose soil, benching for 300mm width, laying fresh material in layers not exceeding 250mm and compacting with plate compactor or power rammer to restore the original alignment levels
and slopes complete as per MoRTH specification clause 3002.
20
156
3120
... More
Providing, laying, spreading and compacting stone aggregate of specific size as per table 400-6 & 400-7 to Water Bound Macadam specification including spreading in uniform thickness, hand packing, rolling with power roller 8-10 tonnes, in stages to proper grade and camber, applying and brooming requisite type of Crushable screening to fill-up the interstices of coarse aggregates, watering (with water browser) and rolling, making necessary earthen bund to protect edegs, lighting, guarding, barricading and maintenance of diversion etc. [MoRTH specification : Clause 404] (by manual means) with all leads (compacted thickness as specified to be measured),Grading no.3 (53-22.4 mm) crusher broken
15.1
971
14666.63
... More
59.Ras Beawar road to Devgarh Km 0/0 to 2/0
-
-
-
... More
Providing and laying 20 mm thick premix patching with 0.27 cum of stone chipping ( 0.18 cum of 13.2 mm size and 0.09 cum of 11.2 mm size ) mixed with 14.6 kg of straight run bitumen per 10 sqm of road surface including heating of binder and aggregate, cleaning the area of patch, pot holes cut to regular shape with vertical sides, removing all loose & disintegrated material, application of tack coat @ 2.25 kg per 10 sqm., laying of patching material and compacting with 8-10 tonne power road roller including cost of bitumen , aggregate, fuel, lubrication, binder ,hire charges of Machinery, T&P etc.
540
123
66738.6
... More
Providing and laying premixed sand seal coat on patch area comprising of thin application of fine aggregate (0.06 cum/10 sqm) premixed with 6.8kg/10 sqm binder 80/100 grade in mini hot mix plant 6-10 TPH and laying and rolling with power roller 8-10 tonne including all lead of mix material.
540
45
24327
... More
Providing and laying granular sub-base material having P.I.not more than 6, including compacted thickness and consolidation by 8-10 tonne power roller at OMC to achieve desired density to required camber and grade including cost of water and hire charges of machinery, including T&P and all lead of material from quarry (compacted thickness to be measured). Grading as per MoRTH specification : Table 400-1, 400-2 with CBR value not less than 15 To achieve 100% Proctor density
25
286
7150
... More
Restoration of rain cuts with soil, morrum, gravel or a mixtrue of these including all leads and lifts and cost of arrangement of land, cleaning the loose soil, benching for 300mm width, laying fresh material in layers not exceeding 250mm and compacting with plate compactor or power rammer to restore the original alignment levels
and slopes complete as per MoRTH specification clause 3002.
28.62
156
4464.72
... More
Providing, laying, spreading and compacting stone aggregate of specific size as per table 400-6 & 400-7 to Water Bound Macadam specification including spreading in uniform thickness, hand packing, rolling with power roller 8-10 tonnes, in stages to proper grade and camber, applying and brooming requisite type of Crushable screening to fill-up the interstices of coarse aggregates, watering (with water browser) and rolling, making necessary earthen bund to protect edegs, lighting, guarding, barricading and maintenance of diversion etc. [MoRTH specification : Clause 404] (by manual means) with all leads (compacted thickness as specified to be measured),Grading no.3 (53-22.4 mm) crusher broken
14.5
971
14083.85
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements