Local Self Government Department Tender

Part A:- Brick work with FPS bricks of class designation 75 in Foundation And plinth level upto two stories in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)

Part A:- Cement plastering including T&P, scaffolding, material and complete labour,1 including cost of water, curing, racking of joints etc. with 12 mm cement plaster on the rough side of single or half brick wall of mix : including Providing /mixing of synthetic fibers compulsorily complying with IS 16481:2022 of 06 mm/12 mm length to be mixed @ 0.25% by weight of Cement i.e. 125 gms per 50 kg Cement up to 900 gms per cum of Concrete/ mortar 1:4 (1 cement : 6 fine/ coarse sand)

Part A:- Finishing wall with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding:New work (Two or more coats applied @ 3.84 kg/10 sqm).

Part A:- Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level :1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Part A:- Stainless steel bolts/square bar and plates

Part A:- Stone Aggregate (Single size) : 25 mm nominal size

Part B:- Providing and Fixing of fibre Reinforced Polymer/Plastic (FRP) Fencing for 11KV transformers or 33 KV compnsing panels measuring 2.00 meters in height and up to 1.50 meters in length. The fencing shall be in yellow/green/pink/grey Colour as directed by the Engineer-in-Charge (EIC) the fencing includes vertical posls made of 50x50x4 mm hollow square sections with a height of 2.70 meters, grouted in 1:2:4 Cement concrete (holdfasts and cement concrete paid separately) the spacing between vertical posts shall not exceed 1.5 meters and must be provided at all corners. The mesh consists of 24 mm outer diameter hollow cylinderical sections with a 3 mm thickness, placed vertically at 75 mm center- to -center intervals, and a horizontal 40x40 mm hollow square section with a 3 mm thickness, all enclosed within 40x40 mm hollow square pipe frame with a 3 mm thickness the panels are securd to the vertical posts using stanless steel bolls . The fencing includes a single entry gate. with a height of 2.00 meters and width up to 1.50 meters. as per site requirments, filted with stainless steel hinges and aldrops the gate must also feature a screen printed nameplate with JVVNL and a danger sign on an SMC sheet. The vertical posts and panel sections to be manufactured using an automatic pultrusion process, incorporating at least 45% fiberglass reinforcement within a polyester-based thermoset resin. The material meets the following specifications heat deflecton temperature170 Degree celcius (Is 13411), Self-extinguishing flame resistance (IS 4249), and non-melting characteristics (IS 13360), with a density2000 kg/per mtr cum. The fencing must also be resistant to chemicals, have a high gloss finish and be weatherproof to ensure durability in various environmental conditions The Quality must ensure good fit and finish with proper strength as per the direction of the EIC. The job includes all necessary loading. unloading transportation, labor,tools safety equipment, and installation with stainless steel bolts ( paid speratly)