Ground Water Department Tender

2.0 TR ISEER not less then 4.6

Supply, Fixing and testing of following capacity ISO certified company made wall mounted stabilizer having output voltage variation from 200 V to 250 V(+/-5%) with input voltage variation from 170 V to 260 V, time delay facility from 2 to 4 minute and high cutoff at 270 V with providing of 16 Amp /20 Amp Industrial plug top making connection etc complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR: 3 kVA

Supply & fixing MS powder coated stand suitable for 1.0/1.5/ 2.0 Tr outdoor type of Split AC. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

Providing and making wall openings in existing stone / Brick masonary partition wall complete with all requited T & P , Scafolding and providing lintel of required size and strength, repairing ,plastering and cleaning the site debrises as required.

Supplying and drawing flexible / stranded bare copper conductor, PVC / XLPE insulated, overall aluminium mylar tape shielded ATC drain wire and outer PVC sheathed industrial Instrumentation (shielded)cables voltage grade 300/500 V as per BS /EN 50288-7 in existing surface or recessed PVC/ MS conduit/casing capping / Cable tray / Open Duct making connections, testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for cables. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR: Armoured: 4 core x 2.5 Sq.mm

Supply, installation, testing and comissioning of interconnecting copper refrigerant piping of DHE Grade C12200- ASTM B68, B75, chemical composition of copper %- 99.0 Min and Phosphorus %- 0.015 to 0.040 . For Annealed copper tube :- Tensile strength = 210 Mpa wih elongation % = 40 Min . Ink Mark Brand Printing on Hard Tubes should be present. duly insulated with tubular elastomeric nitrile rubber FM/UL approved with high water vapor diffusion resistance and low thermal conductivity should be certified 'Class O' in Fire Propagation as per BS 476 Part 6 including chase cutting andfilling with mortar, Slotted channel supports mounted on 10 mm threaded rod at suitable spacing the exposed piping shall be wrapped with glass woven cloth and lag coating for vapour barrier and weather protection. Joints shall be covered with nitrile rubber tape of 3 mm thick complete as required of following sizes. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

15.9 mm O.D., wall thinkness ≥ 0.8mm (insulation – 13 mm thick)

12.7 mm O.D., wall thinkness ≥ 0.8mm (insulation – 13 mm thick)

Providing & Fixing of IS : 4985 - 2000 Class -4 (10 Kgf / Sqcm) UPVC drain water piping with fittings (IS:7834 & 10Kgf/sqcm) like elbow, socket, Tee, solvent cement jointing, support with MS hanger on ceiling or recessed in wall with chasing & plastering with 6 mm thick closed cell elastomeric nitrile rubber insulation including leakage testing etc. as required of following Nominal sizes. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR: 20 mm

Supply , Installation, Testing and Comissioning of IS:1475 marked self contained drinking water cooler with hermetically sealed compressor,non CFC refrigerent suitable for operation on 230V/1pH/50Hz AC supply,Full stainless steel (SS304)body (0.8 mm thick) and tank (0.5 mm thick) , stainless steel water tray, minimum two nos Brass Chrome plated faucets and suitable drainage system complete in all respect with required height MS fabricated and Painted Angle iron frame ( Cost of frame to be paid Extra )complete in all respect of the following capacity. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR: cooling capacity 150 Ltr./Hr. and storage capacity 150 Ltrs

Providing & Fixing of BIS certified Oil filled radiator having following fins with temperature control setting sound free operation with minimum 1 year warranty & temperature setting, Rated Voltage:-230 V, Rated Wattage:-2400 W made out from CRCA sheet with powder coating, tubular type element castor wheel, 1.5 mtr PVC power cord along with 16 Amp plug top. net weight should not be less then 12 Kg and minimum dimensions are 520 X 165 X 710mm complete in all respect. NABL accredeated / appropriated lab testing reports with OEM certificate must submitted to engineer in charge. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR: 9 Fins

SITC of reverse Osmosis water Purification system (RO system) compatible for water cooler with ABS construction fully automatic operation with auto start and auto off. capacit, equipped with standard Filtration stage / cartridge (sediment filter , Activated carbon filter , UF, sediment, filing Composite R0 Mebrane), Input power supply 100-250 VAC 1 Ph. System Voltage 24V DC, percentage reduction in TDS 90% or better. The job includes installation at site with existing water supply line with required piping accessories etc. The contractor shall provide one year warranty with quarterly service (and also as & when required) of above RO system during warranty period including required consumable items: Production capacity- 15 LPH, Water storage capacity 8 ltr

Supply, Installation, Testing and Commissioning of IS:15750(2006) (for Frost Free) marked 250 Ltr. 3 Star Frost Free Double Door Fridge having following specifications: Conformity to Indian Standard – IS:15750(2006) for Frost Free, Storage Volume (NET CAPACITY) – 250 Litres, Type of Door – Double, Insulation – Puff, Built-in Voltage Stabilizer – Yes, Method of defrosting – Frost Free, BEE Star Rating as on date – 3, Ecofriendly Refrigerant – Yes, Compressor – Power Saver Compressor, Voltage range at 430C – 230 Volts (tolerance 10%), Coil Material – Copper, Type of finish – Mettalic, Colour – Silver/Grey.

Providing and fixing Desert Cooler of following specifications: Nominal Air Delivery / Capacity (Cubic meter per hour) – 6000, Maximum Power Consumption at zero static pressure – 400 Watts for 6000 nominal capacity, Type of Mounting – Stand Mounted without castor wheels, Sump Tank Capacity (minimum) – 120 Liters for 6000 nominal capacity, Material of Filter panel, Grill, Top of cooler body, cabinet, sump tank – Galvanized steel sheet (ISI marked to IS 277 latest) with zinc coating not less than 100 gms/sq.meter, Sheet Thickness (nominal) for Filter panel, Grill, Top of cooler body, cabinet – 0.8 mm, Sump Tank Sheet Thickness (nominal) – 1.0 mm, All internal surfaces of Steel Body Cooler Painted with Water Resistant paint to IS 9862 latest – Yes, Drain Plug Material – Brass / SS, Fan Size – 500 mm for 6000 nominal capacity, Blade Material – Aluminum (for 6000 nominal capacity), Fan Motor – ISI marked to IS: 996 latest, Minimum number of steps for fan speed control – 3, Power Factor – 0.9 OR BETTER, Conformity of Submersible Pump – Generally conforming to IS:11951 latest, Filter Pads – Synthetic Honeycomb pads, Thickness of Filter Pad – 15 mm or above, Minimum length of ISI marked connecting cable with 3-pin moulded Plug Top, 5/6 Amps – 2.5 meter, Location of the Water Collecting Chamber – At the Bottom, Float Valve at inlet – Yes, Conformity to Indian Standard – Generally conforming to IS: 3315 latest, WARRANTY – 1 year.

Providing & fixing 12 mm thick tegular edge Glass Fibre Reinforced Gypsum False ceiling tiles of size 595 x 595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanised steel sections ( galvanized @ 170 gsm/sqm.) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200mm center to center and cross “T” of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 21x21x0.30 mm and laying false ceiling tiles of approved texture in the grid including, wherever, required, cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats fixed to ceiling with 6 mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanised level clips spaced at 1200mm center to center

Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in-Charge.

Providing Factory Made 100% Solid WPC (Wood polymer Composite) Board of 18mm thicknesss of required size comprising of virign PVC resin of K Value 58-60 (Suspemsion Grade), Calcium Corbonate and natural Fibers (Wood Powders/ rice husk/ wheat husk) and Non toxic additives , made from Extrusion process WPC foam sheet Single Extruded ( Inner) with density not less than 550 kg/cbm manufactured by an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withrawal strength of 1800 N ( Face) & 900 N ( Edge), Minimum Compissive Stength of 58 N/mm2, Modulus of elasticity 900N/mm2 and resistance of spread of flam of Class A caegory wih Property of being Termite/ Borer Free.Water/Moisture Proof and Fire Retardant and fixinng stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For KITCHEN CABINET & CUPBOARDS.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m) , fixing in position and applying a priming coat of approved steel primer all complete:

Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete: 20 mm

Providing and fixing Cotton Cloth Curtains of desired Colour and Sizes in existing curtain rods for doors and windows having following specifications: Material – Cotton, GSM Quality – 250 or more, Material Care – Both hand and machine wash, Lining included – No, Pattern – Plain, Fitting – Eyelits complete in all respect.