Tenders of Department Of Atomic Energy in Rajasthan

CATEGORY: Stainless Steel Drums- SS304, 210 liters. Specifications as per annexure attached

CATEGORY: 150 AH, 2V, Plante Battery Cells (Dry uncharged)

CATEGORY: Manual Ball Valves for ON/OFF (Isolation) Service

CATEGORY: Air Filter and Regulator

CATEGORY: 3/2 Direct Acting, Normally Close Type, 0-6Kg/cm2, SOLENOID VALVES 110 VAC 50 Hz , 3/2 Direct Acting, Normally Open Type, 0-6Kg/cm2, SOLENOID VALVES 110 VAC 50 Hz , 3/2 Pilot operated, Normally Open Type, SOLENOID VALVES 110 V AC, 50Hz

CATEGORY: Galvanized Iron Core Box (V2) (Q3)

BOQ Title: Double Disc Gate Valves

CATEGORY: Micronised graphite powder with high purity of fixed carbon minimum 97% confirming to IS-495-1967.

CATEGORY: conforming to DIN 7991 M5 0.8 mm pitch and 50 mm length , SOCKET COUNTERSUNK HEAD SCREW - ALLEN HEAD - conforming to DIN 7991 M6 1 mm pitch and 60 mm length , SOCKET COUNTERSUNK HEAD SCREW - ALLEN HEAD - conforming to DIN 7991 M8 1.25 mm pitch and 50 mm length , SOCKET COUNTERSUNK HEAD SCREW - ALLEN HEAD - conforming to DIN 7991 M8 1 mm pitch and 50 mm length , SOCKET COUNTERSUNK HEAD SCREW - ALLEN HEAD - conforming to DIN 7991 M10 1.5 mm pitch and 60 mm length , SOCKET COUNTERSUNK HEAD SCREW - ALLEN HEAD - conforming to DIN 7991 M10 1.25 mm pitch and 60 mm length , SOCKET COUNTERSUNK HEAD SCREW - ALLEN HEAD - conforming to DIN 7991 M12 1.75 mm pitch and 60 mm length , SOCKET COUNTERSUNK HEAD SCREW - ALLEN HEAD - conforming to DIN 7991 M12 1.25 mm pitch and 60 mm length , SOCKET COUNTERSUNK HEAD SCREW - ALLEN HEAD - conforming to DIN 7991 M14 2 mm pitch and 60 mm length , SOCKET COUNTERSUNK HEAD SCREW - ALLEN HEAD - conforming to DIN 7991 M14 1.5 mm pitch and 60 mm length , HEX HEAD bolt with nuts conforming to DIN 931 slash 933 M3 0.5 mm pitch and 20 mm length , HEX HEAD bolt with nuts conforming to DIN 931 slash 933 M4 0.7 mm pitch and 50 mm length , HEX HEAD bolt with nuts conforming to DIN 931 slash 933 M5 0.8 mm pitch and 50 mm length , HEX HEAD bolt with nuts conforming to DIN 931 slash 933 M6 1 mm pitch and 60 mm length , HEX HEAD bolt with nuts conforming to DIN 931 slash 933 M8 1.25 mm pitch and 50 mm length , HEX HEAD bolt with nuts conforming to DIN 931 slash 933 M8 1 mm pitch and 50 mm length , HEX HEAD bolt with nuts conforming to DIN 931 slash 933 M10 1.5 mm pitch and 60 mm length , HEX HEAD bolt with nuts conforming to DIN 931 slash 933 M10 1.25 mm pitch and 60 mm length , HEX HEAD bolt with nuts conforming to DIN 931 slash 933 M12 1.75 mm pitch and 60 mm length , HEX HEAD bolt with nuts conforming to DIN 931 slash 933 M12 1.25 mm pitch and 60 mm length , HEX HEAD bolt with nuts conforming to DIN 931 slash 933 M14 2 mm pitch and 60 mm length , HEX HEAD bolt with nuts conforming to DIN 931 slash 933 M14 1.5 mm pitch and 60 mm length , HEX HEAD bolt with nuts conforming to DIN 931 slash 933 M16 2 mm pitch and 70 mm length , HEX HEAD bolt with nuts conforming to DIN 931 slash 933 M16 1.5 mm pitch and 70 mm length , HEX HEAD bolt with nuts conforming to DIN 931 slash 933 M18 2.5 mm pitch and 70 mm length , HEX HEAD bolt with nuts conforming to DIN 931 slash 933 M18 1.5 mm pitch and 70 mm length , HEX HEAD bolt with nuts conforming to DIN 931 slash 933 M20 2.5 mm pitch and 70 mm length , HEX HEAD bolt with nuts conforming to DIN 931 slash 933 M20 1.5 mm pitch and 70 mm length , HEX HEAD bolt with nuts conforming to DIN 931 slash 933 M22 2.5 mm pitch and 70 mm length , HEX HEAD bolt with nuts conforming to DIN 931 slash 933 M22 1.5 mm pitch and 70 mm length , HEX HEAD bolt with nuts conforming to DIN 931 slash 933 M24 3 mm pitch and 70 mm length , HEX HEAD bolt with nuts conforming to DIN 931 slash 933 M24 2 mm pitch and 70 mm length

CATEGORY: PLC SCADA based control system