Border Security Force Tender

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. (a) 3.5 X 185 sq. mm (57 mm)

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part Il complete with fitting and cutting, jointing etc. in the existing trench, complete as required. (i) 90 mm dia (OD-90 mm & ID-76 mm nominal)

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part Il complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as required. (i) 90 mm dia (OD-90 mm & ID-76 mm nominal)

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. make LK/ Havells/ABB/Siemen/HPL (I) 100 Amp, 30KA, FPMCCB

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. make LK/ Havells/ABB/Siemen/HPL (I) 125 Amp, 36KA, FPMCCB

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. make LK/ Havells/ABB/Siemen/HPL (I) 200 Amp, 36KA, FPMCCB

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. make LK/ Havells/ABB/Siemen/HPL (I) 250 Amp, 36KA, FPMCCB

Supplying and fixing 63 Amp, double pole, 240 volts, C series MCB in the existing DB/Panel complete with connections, testing and commissioning etc. as required..Make- Havells / ABB/ Siemens/HPL/ C&S/LK

Supplying and fixing 400 Amps, 4 pole, 415 volts, 50 Hz on load manual change over switch with SS enclosure in the existing Panel complete with connections, testing and commissioning etc. as required.Make- Havells / ABB/ Siemens/HPL/ C&S/ L K

Supplying and Laying of one number aluminium conductor, XLPE Insulated, PVC sheathed, armoured power cable of 1.1 kV grade , confirming to IS : 7098 (Part-1) 1988 of following size in the existing DWC HDPE /RCC/ HUME/ METAL pipe as required. (ISI marked Make Havells /Polycab/ Finolex /CCI /RR Kabel/KEI) i) 3 ½ x 70 sqmm

Supplying and Laying of one number aluminium conductor, XLPE Insulated, PVC sheathed, armoured power cable of 1.1 kV grade , confirming to IS : 7098 (Part-1) 1988 of following size in the existing DWC HDPE /RCC/ HUME/ METAL pipe as required. (ISI marked Make Havells /Polycab/ Finolex /CCI /RR Kabel/KEI) i) 3 ½ x 185 sqmm

Supplying and Laying of one number aluminium conductor, XLPE Insulated, PVC sheathed, armoured power cable of 1.1 kV grade , confirming to IS : 7098 (Part-1) 1988 of following size in the existing masonry open duct , for loose connection etc as required. i) 3 ½ x 70 sqmm

Supplying and Laying of one number aluminium conductor, XLPE Insulated, PVC sheathed, armoured power cable of 1.1 kV grade , confirming to IS : 7098 (Part-1) 1988 of following size in the existing masonry open duct , for loose connection etc as required. i) 3 ½ x 185 sqmm

Supplying and making outdoor end termination with heat shrinkable type outdoor termination kit including aluminium lugs and other jointing materials for following size of PVC insulated && PVC sheathed / XLPE aluminium condutor cable of 1.1 KV grade as required. i) 3 ½ x 185 sqmm

Desigining,Fabrication Supply/ installation/ testing and commissioning of compartmentalised type outdoor feeder piller, double door made out of 2.00 mm thick CRCA powdered coated sheet having 300 amps, 04 nos insulated aluminium bus bars and to accommodate following accessories, front & back openable door with proper hinges, R-Y-B LED indicators and P & F of internal connection with suitable size of copper wires, following accessories & angle iron frame of suitable size with 600 mm long four legs made out of 50 mm x 50 mm x 5 mm thick angle & grouting the same in suitable cement concrete foundation, arrangement for incoming & outgoing cables, cable termination, earthing, locking, interconnection etc. as required. (CPRI Approved builder). The feeder pillar should have Indicating lamp (LED type) 22.5 mm 230 volt AC Red, Yellow and blue make L&T/Havells/simens- 03 nos, CT Ratio (Amp) 100/05, accuracy class 1, burden 05 VA - make L&T/AE/Trinity -03 nos, Digital Multifunction meter (VAF + PF) make L&T Cat no. WC411011OOOO or equivalent in AE/Siemns- 01 No, Earth studs on both side. The feeder pillar should have provision to acccomodate:- 250 Amp 4 Pole MCCB-1 Nos as incomer, 200 Amp 4 pole MCCB -02 nos, 125 Amp 4 pole MCCB -04 nos and 100 Amp 4 Pole MCCB-3 Nos, 63 Amps 2 Pole MCB -06 Nos as outgoing. The design of the feeder pillar should got approved from Competent Technical authority before fabrication.(The FP should be of approx size 1250 x 1250 x 400 mm deep (area of Feeder pillar is taken in sq mm face area)

Add GST difference Multification factor (0.0633) on DSR Items(1 to 11)

Apply Correction factor on DSR Items (1to 11) (DSR Items (1to 11) + GST difference) i.e Rs 171584+Rs.10861.24 = 182445.27