Ajmer Development Authority Tender
... More
The ADA has issued a formal invitation for competitive bids for the Ajmer Development Authority project, for Recarpeting Of Entrance Road, Boundary Wall Height Increase And Concertina Fencing Work At Affordable Housing Scheme At Beawar Road, Daurai Ajmer in Ajmer, Rajasthan, with an estimated contract value of Rs. 35,34,000. The bid opening date for this tender is 16-11-2026 and the last date for bid submission is 26-11-2026. Interested bidders for Ajmer Development Authority tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Ajmer Development Authority - ADA Tender - Rajasthan Tender
Opening Date16 Nov 2026
Closing Date26 Nov 2026
Tender Amount₹ 35,34,000
Costs
EMD
₹ 70,680Document Cost
₹ 500Tender Fee
₹ 500
Description
Recarpeting Of Entrance Road, Boundary Wall Height Increase And Concertina Fencing Work At Affordable Housing Scheme At Beawar Road, Daurai Ajmer
Contact
Tender Id
2026_ADA_605952_1Tender No
NIT 35/2026-27 (4)Tender Authority
Ajmer Development Authority ViewPurchaser Address
-Website
https://www.adaajmer.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level.('Original producers' who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786) Thermo-mechanically Treated bars (Conforming of relevent IS code)
3391.2
77
261122.4
... More
Brick work with clay flyash F.P.S. brick (IS 13757- 1993 ) of class designation 75 in superstructure above plinth level upto floor five level in : Cement mortar 1 : 6 (1 cement : 6 coarse sand)
165.6
4832
800179.2
... More
Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead.
800
15
12000
... More
Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish :20mm thick .
2240
202
452480
... More
Painting exterior surface of Wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respect including scaffolding and safety provision
2240
123
275520
... More
Dismantling of flexible pavements and disposal of dismantled materials upto a lead of 100 m, stacking serviceable and unserviceable materials separately as per MoRTH Specification Clause 202 By mechanical means Bituminous coarse
90
69
6210
... More
Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base(WBM/WMM) using truck mounted sprayer including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per MoRTH Specification Clause 502
1680
28
47040
... More
Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion pressure distributor at the rate of 0.30 to 0.35 kg per sqm on the prepared non-bituminous surfaces (cement concrete pavement) cleaned with Hydraulic broom as per MoRTH Specification Clause 503.
1680
11
18480
... More
Providing and laying bituminous macadam with Drum type hot mix plant using crushed aggregates of grading as per Table 500-7 premixed with bituminous binder, transported to site with all leads laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per MoRTH Specification Clause 504. (i) Bitumen VG 30
84
6100
512400
... More
Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using Viscosity grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable Hot Mix Plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per MoRTH Specification Clause 508 By mechanical means Type B bitumen VG-30
1680
133
223440
... More
Providing and fixing concertina coil fencing with required dia 610 mm (having 15 nos. round per 6 metre length) up to 3m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. stud tied with GI staples and GI clips to retain horizontal including necessary bolts or GI barbed wire tied to angle iron all complete as per direction of Engineer In Charge with reinforced barbed tape (R.B.T.)/Spring core(2.5 mm thick) wire of high tensile strength of 165 kg/sq.mm with tape (0.52 mm thick) and weight 43.478 gm/metre (Cost of MS angle, CC block shall be paid extra)
1000
266
266000
... More
Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide
2500
96
240000

