Public Works Department Tender
... More
The PWD has issued a formal invitation for competitive bids for the Public Works Department project, for Special Repair Of Sports Hostel At Government Sports And Arts College Jalandhar in Jalandhar, Punjab, with an estimated contract value of Rs. 1,06,55,918. The bid opening date for this tender is 23-05-2025 and the last date for bid submission is 14-06-2025. Interested bidders for Public Works Department tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Costs
EMD
₹ 2,13,200Document Cost
₹ 10,000Tender Fee
₹ 5,900
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_CEPW_141130_1Tender No
Bid No 07 of 23/05/2025Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://https://pwdpunjab.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm
2483.06
126
-
... More
Scraping (a) White wash and colour wash
-
7
-
... More
Scraping
(c) Cement plaster
-
37
-
... More
12.5 mm thick cement plaster 1:5
1198.79
194
-
... More
20mm thick cement plaster 1:4 in two coat work
496.61
280
-
... More
Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get
required finish
5086.22
84
-
... More
Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specific ation including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position excluding the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete (b) Doors and windows frame of size 113mm x 60mm with 35 mm wide single rebate weighing 3.38 kg per meter.
151.98
527
-
... More
Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specific ation including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position excluding the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete (c) Doors and windows frame of size 151mm x 60mm with 35 mm wide double rebate weighing 3.95 kg per meter.
295.73
603
-
... More
Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint.
1405.85
67
-
... More
Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make.
(b) Glass panes 4mm or 10.75 kg / sqm exceeding 0.4 sqm of area
113.53
629
-
... More
Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in
position
4.73
10798
-
... More
Providing & fixing of Box type steel windows, made of various ERW section outer 60mm x 25mm, central mullion 60mm x 25mm, for shutter 50mm x 20mm having thickness of 1.25mm (18 gauge), shash bar MS Tee 25mm x 3mm where required joints mitered and electrically flashwelded, with iron fittings including necessary iron handles, hinged cleat, tower bolts, iron hold fast and pintle hinges complete (excluding glazing and wire gauge) and finished with ready mixed paint red lead non setting primer complete as per specification, Drawings and to the entire satisfaction of engineer-in-charge. (Note:- Glazing, wire gauge and grill will be paid as per respective items)
666
145
-
... More
Wire gauge fixed in steel windows, of standard rolled steel section with 3mm thick flat iron cover moulding of 12.5 mm width, fixed with machine screws, complete in all respects.
23.41
954
-
... More
Iron grated doors, including pintle hinges & arrangements.
8.1
10630
-
... More
Applying priming coat with metal primer on new steel or iron work including preparation of surface.
100.33
25
-
... More
Factory manufactured solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : IS 2202-1 (1999): (a) Commercial with elm or gurjan facing on both \ Sides with
laminated core and lipped edges:-
(iv) 35mm thick
21.95
2430
-
... More
Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x 300 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
-
902
-
... More
Black Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone,
including rubbing and polishing including labour for fixing dowel pins and cramps.
28.15
3330
-
... More
Structural steel work in angles, tees, flats, riveted, including cutting, fixing all gusset plates, bolts, nuts, rivets etc. with hoisting and erecting in position.
(a) For roof truss, well curbs, plate girders etc. of any span for building for bridges upto 15M span
-
9734
-
... More
Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS :
1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :
300mm x 16mm
57
209
-
... More
Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water
absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete.
a Size 600x600 mm
52.23
1110
-
... More
Grouting the joints of flooring tiles having joints of 3 mm width, using 2mm to 3 mm gap using spacers and later this gap to be filled with cement based grout ) with Cement base grout and matching pigments etc., complete, including filling / grouting and finishing complete as per direction of Engineer-in-charge.
a Size 600x600 mm.
52.23
130
-
... More
First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level.
12.36
5773
-
... More
Regrading terracing of mud plaster covered with tiles or bricks in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud plaster to proper, slope, relaying mud plaster Gobri leaping and tiles or bricks grouted in cement mortar 1:3 (1 cement and 3 fine sand) including replacing
unserviceable tiles, or bricks with new over and disposal of unserviceable material to the dumping ground within 50
m lead (The cost of new tiles or bricks excluded).
1361.19
422
-
... More
Replacement of Old Tiles With New Tiles
10072.81
5
-
... More
Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.
311.06
71
-
... More
Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50.00 thick cement concrete 1:8:16
20
106
-
... More
Bottom khurra on ground 1.2m 0.6m consisting of bricks on edge laid in cement mortar 1:3 over 7.5 cm cement concret 1:8:16 including 12.5mm thick cement plaster 1:3
20
779
-
... More
A-2) SHED 15' X 20; BACK SIDE KITCHEN AT HOSTEL SPORTS AND ART COLLEGE JALANDHAR.
-
-
-
... More
Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from
the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.
13.41
191
-
... More
Cement concrete 1:8:16 With stone aggregates 40mm gauge
mixing by manual means
2.64
3596
-
... More
First class burnt brick laid in cement sand mortar 1:6 in foundation and plinth
2.49
5628
-
... More
Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated
by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.
-
5887
-
... More
Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete
0.8
7876
-
... More
Shuttering for faces of concrete foundations and foundation
beam & plinth beam (vertical or battering)
1.14
221
-
... More
Centering and shuttering for columns (Square or rectangular
or poly gonal in plain)
2.72
502
-
... More
Structural steel work in angles, tees, flats, riveted, including cutting, fixing all gusset plates, bolts, nuts, rivets etc. with hoisting and erecting in position.
(a) For roof truss, well curbs, plate girders etc. of any span for building for bridges upto 15M span
4.49
9734
-
... More
Providing and fixing ( PPGL) precoated painted galvalume sheet roofing (size, shape and pitch of corrugation as approved by Engineer-in-charge) The end rib shall have anti cappillary groove and return leg. The steel sheet must be having yield strength of 550 MPa ( Fy= 550 MPa) metallic coated with Zinc- Aluminium alloy ( i.e. 55% Al, 43.4%Zinc, 1.6% Si-Zincalume) AZ150 ( Min. 150 bm/mm2 total on both sides), pre painted with super Durable Polyster XRW quality paint includes inorganic infrared reflective pigment. The sheet confirms to general requirement of AS/NZS 2728 type 4/ IS 15965 class 3 durability and gloss value of 25% -40%. should be supplied in single length upto 12 metre or as desired by Engineer-incharge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (a) 0.50 mm (+ 0.05 %) thick
29.73
823
-
... More
Providing and fixing polycarbonate sheet sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping
screws with EPDM seal, and the joints shall be provided with aluminium strips at top and bottom as a seal complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to
size and shape wherever required.
(d) Pollycarbonate sheet 2mm thick solid type
167.22
1672
-
... More
G.I. Sheet gutters 0.80mm thick semicircluar 15cm diametre including fixing with clamps and making connections with rain water pipes.
12.2
616
-
... More
Providing and fixing 110 mm dia . U.P.V.C Rain water pipe of 4 kgf./sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction of
Engineer-in- charge
7.32
244
-
... More
Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% taking outside the
premises in 15 cm layers including ramming, watering and consolidated lead upto 1000 metres
5.25
460
-
... More
Base course of floor consisting of 100mm thick cement concrete 1:8:16 ith stone aggregate 40mm gauge and 100 mm fine sand filling using mechanical mixer for mixing of material
27.87
493
-
... More
Kota stone slab 20-25 mm thick flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing
and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
27.87
1162
-
... More
A-3) INTERLOCKING TILE AT HOSTEL SPORTS AND ARTS COLLEGE JALANDHAR
-
-
-
... More
Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from
the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.
21.08
191
-
... More
Cement concrete 1:6:12 With stone aggregate 40mm gauge
mixing by mechanical means using concrete mixer volumetric type
333.83
3880
-
... More
First class burnt brick laid in cement sand mortar 1:6 in foundation and plinth
22.13
5628
-
... More
Providing and laying 60 mm thick factory made cement concrete interlocking Paving blocks of M- 35 grade manufactured by block making machine equipped with steel mould clamped to a strong vibratory table with hydraulic pressure for compaction of concrete as per IRC SP 63 -2014
and of approved size and design / shape laid in Ordinary Grey Colour and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all
complete as per directions of Engineer-in- Charge
2137.63
724
-
... More
Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% taking outside the
premises in 15 cm layers including ramming, watering and consolidated lead upto 1000 metres
630.28
460
-
... More
Cement concrete 1:2:4 With stone ballast or shingle mixing by manual means
3.16
5285
-
... More
Finishing walls with cement based water soluble exterior paint such as snowcem, robbiacem etc. two or more coats to give an
even shade
412.7
84
-
... More
Scraping (a) White wash and colour wash
206.35
7
-
... More
Scraping
(c) Cement plaster
86.66
37
-
... More
12.5 mm thick cement plaster 1:5
43.33
194
-
... More
20mm thick cement plaster 1:5 in two coat work
43.33
266
-
... More
(B) PUBLIC HEALTH
-
-
-
... More
Sub Head-1 Internal Water Supply System
-
-
-
... More
CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in- Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge.
-
-
-
... More
CPVC SDR 11 Pipe & fitting 16mm o/d
10
188
-
... More
b) CPVC SDR 11 Pipe & fitting 20m mo/d
43
233
-
... More
c) c CPVC SDR 11 Pipe & fitting 25mmo/d
45
301
-
... More
d) c CPVC SDR 11 Pipe & fitting 32mmo/d
55
402
-
... More
Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition.Size 75mm x 75mm
-
-
-
... More
qty same as CPVC P 20mm +25 mm
88
72
-
... More
Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required.
-
-
-
... More
Through wall 11.43 cm thick
19
176
-
... More
Through wall 22.86 cm thick
19
251
-
... More
Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete.
-
-
-
... More
20mm i/d Brass Ball valves
2
356
-
... More
25mm i/d Brass Ball valves
7
555
-
... More
32mm i/d Brass Ball valves
4
893
-
... More
Sub Head-2 Internal Sewerage System
-
-
-
... More
Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonagepipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing.
-
-
-
... More
Single Socket Type B
-
-
-
... More
b) 110mm o/d SWR UPVC pipe lines laid complete
87
396
-
... More
c) 90mm o/d SWR UPVC pipe lines laid complete
88
344
-
... More
Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.
-
-
-
... More
For 110mm o/d pipes
-
-
-
... More
ii) Single Tee With Door
11
236
-
... More
v) Elbow 90 Degree (all side socketed)
15
162
-
... More
vi) Vent Cowls
8
45
-
... More
vii) Reducer 110mm x 75mm
12
90
-
... More
viii) Coupler
14
111
-
... More
ix) P Trap/Floor Trap 110mm x 110mm
52
338
-
... More
xi) Single Y-Junction
7
239
-
... More
For 90 mm o/d pipes
-
-
-
... More
ii) Single Tee With Door
12
216
-
... More
v) Elbow 90 Degree (all side socketed)
19
119
-
... More
vi) Vent Cowls
2
37
-
... More
viii) Coupler
11
109
-
... More
xi) Single Y-Junction
7
207
-
... More
Providing PVC solvent cement joints to SWR Pipes and specials including cost of PVC solvent cement and tools etc of approved make (to the approval of Engineer-in-charge )
-
-
-
... More
110mm o/d
20
101
-
... More
90mm o/d
20
85
-
... More
Providing & Fixing in position M.S or heavy flat iron clamps made out of M.S flat iron not less than 5 mm of the approved design for fixing C.I. soil waste, vent or antisyhonage pipes to walls complete in all respects including cutting and making good the walls and floors etc. and painting.
.
-
-
-
... More
M.S. Holder bats clamps for 100mm i/d H.C.I. pipes
15
217
-
... More
M.S. Holder bats clamps for 75mm i/d
H.C.I. pipes
15
202
-
... More
Sub Work-3 Dismatling , Civil work, Flooring and Wall Tile
-
-
-
... More
Dismantling of wall tiles at any floor of the building, laid in cement mortar including scraping of cement plaster and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect.
429.01
109
-
... More
Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect.
121.28
113
-
... More
12.5 mm thick cement plaster 1:2
429.01
224
-
... More
Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material
121.28
424
-
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg /sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/ sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
121.28
335
-
... More
Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x 300 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement:
4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
429.01
898
-
... More
Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading.
121.28
707
-
... More
Supplying and filling cinder on roof (Ist story) including light ramming
30
1550
-
... More
Sub Head-4 Sanitary Installation
-
-
-
... More
Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked,PVC short bend32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge
11
5035
-
... More
Providing and fixing jet spray with 2'-6" long PVC pipe
-
-
-
... More
With C.P. Brass nut
11
501
-
... More
Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-in-charge ) complete in all respect.
-
-
-
... More
C.P. Brass Pillar Cock foam flow
13
2001
-
... More
Providing and fixing in position paper holders of approved make (to the approval of Engineer-in-charge ) fixed in to wall with C.P brass screws complete in all respect.
11
1141
-
... More
Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect.
-
-
-
... More
C.P. brass towel Rails size 15mm dia 610mm long
19
1621
-
... More
C.P brass towel ring
7
959
-
... More
Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in allrespect
25
888
-
... More
Providing and fixing in position vitreous Chinaware white lIndian make large flat back or angular lipped front urinal 375 x 390 x 590 mm of approved make (to the approval of the Engineer-in-charge) consisting of C.P. brass Urinal waste Coupling dome type 32mm outer length 75 mm , C.P. brass Urinal Spreader Ocular-Regular and C.P. brass tube connection 300 mm long complete.
6
6901
-
... More
Vitreous white Chinaware Partition
6
2406
-
... More
Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge)
-
-
-
... More
Size 600mmx450mm
13
1263
-
... More
Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect
-
-
-
... More
C.P. brass Bib cock foam flow without flange
11
966
-
... More
C.P. brass Bib cock long nose/ long body foam flow without flange
24
1214
-
... More
Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect
-
-
-
... More
PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut
32
191
-
... More
Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect.
21
119
-
... More
Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect
-
-
-
... More
C.P.brass 15mm Concealed stop cock with flange.
55
1268
-
... More
C.P.brass 15mm Angle valve without flange
55
870
-
... More
Providing and fixing in position automatic brass Ball Cock intanks. iii)32mm i/d
8
950
-
... More
Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect.
99
66
-
... More
Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-in-charge )with various fixtures complete in all respect.
-
-
-
... More
C.P. Brass extension piece, 25mm long to 50mm long
74
112
-
... More
Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer - in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. 2 Nos 5000 ltr each tank
10000
11
-
... More
Construction of RCC Plateform on Roof for HDPE water storage tanks complete as per drawing & specifications & as desired by Engineer-in-Charge (Analysis Attached)
2
4389
-
... More
Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in
all respect.
6
87
-
... More
Providing & fixing in position Water Cooler without Stablizer of approved make (to the approval of Engineer-in-charge ) including carriage complete in all respect.
-
-
-
... More
Water Cooler Semi Steel Body 80/120 ltr Capacity without Stablizer
2
37590
-
... More
Supply & installation of AQUA FLO DX UV Water purification system, capacity 60 ltr. Per hour, 100% chemical free, Dimension 210mm width x 140mm depth x 382mm height, in built voltage stabilizer, Hi Flo, Dual Cartridge including installation etc. Complete in all respect as approved and desired by the Engineer-in-charge at site. Make... EUREKA FORBES/ Kent / Aquasure – or its equivalent.
2
13369
-
... More
Providing and fixing in position C.P. brass overhead shower 1 flow with shower arm with 15mm i/d inlet of approved make (to the approval of Engineer-in-charge) complete in all respect.
12
1079
-
... More
Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In Charge. (Glazing and paneling to be paid for separately) :
-
-
-
... More
For fixed portion and chawkhats
102
370
-
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required
250
387
-
... More
Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames withC.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-In-Charge. Pre- laminated particle board with decorative lamination on one side.
80
1007
-
... More
Supply and erection of Heavy duty Exhaust Fan 300mm, 900RPM with aluminium louver shutter, double ball bearing longer life including flexible wire & petty material etc. for connections and testing complete in all respect as approved and desired by the Engineer in-charges at site (Analysis Attached)
3
4800
-
... More
Providing and fixing in position SS Gratingwith frame of approved make (to the approval of engineer in charge) complete in allrespects
52
116
-
... More
Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) including Rack Bolt Screw Pair 115mm long without CP fittings complete in all respect.
-
-
-
... More
Size 560mm x 450mm (Under counter oval)
13
2833
-
... More
Dismantling Sanitary fixtures such as Eurpoean/Indian/Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge.
-
-
-
... More
Eurpoean/Indian/Orissa W.C.,
11
230
-
... More
PVC / China Ware Cistern
11
172
-
... More
Wash Hand Basin / Urinal Pot
13
114
-
... More
CP Bib Cock/Angle Cock/Stop Cock/Shower/Bottle Trap
35
330
-
... More
Bathroom Assessories such as Soap Dish, Towel Rail, Towel Ring, Towel Bracket, Mirror, Toilet Paper Holder, Seat Cover, Jet Pressure and all other accessories.
39
23
-
... More
Sub Head-5 Air Conditioner & Fire Fighting System
-
-
-
... More
Providing & Installing 3 Star split type wall mounted air conditioner capacity 2.0 tonne with arrangement for installing OD units including connection of inlet and outlet copper tubes (Rate is inclusive of copper pipe 6.00mtrs and cable upto 8.00mtrs length ) with proper insulation, cable link between ID unit and OD units stand for OD unit and concealing of Copper pipes and drainage pipe within building and installing charges complete in all respects
1
66500
-
... More
AUTOMATIC VOLTAGE STABLIZER:
-
-
-
... More
Supply and erection of Single phase copper wound Automatic voltage stablizer of suitable capacity electronically controlled circuit with input voltage 140-260 volts single phase AC supply and output voltage 220 ± 5% volts single phase AC supply having main silicon core copper wound step up transformer with suitable nos. of turns on primary side and secondary side the transformer should be fully insulated inside the MS sheet box of suitable size. There should be power control relay and single pole MCB (C-curve, 10kA) of suitable capacity complete with internal copper wiring along with amp. meter and volt meter, high voltage cut off 280 volt input (240 volt output) and 90 volt maximum boost and overloading protection to be provided:-
-
-
-
... More
Automatic Voltage Stablizer 5 KVA
-
-
-
... More
1 Nos For Air Conditioner & 1 No for water cooler
2
8191
-
... More
Providing, laying, jointing, fixing and testing uPVC Pipe with G.I. specials as per ISI-4985, including cost of G.I. specials such as tees, bends, sockets, elbows etc. testing inside building complete.
-
-
-
... More
25mm i/d
-
-
-
... More
For 2.00 tonne split AC
10
194
-
... More
Providing and fixing of FIRE EXTINGUISHER, ABC Powder type (stored pressure) as per IS: 15683 complete with all accessories as per Manufactures Specification. ISI Mark complete in all respect.
-
-
-
... More
6 Kg. Capacity
6
2940
-
... More
Providing and fixing of FIRE EXTINGUISHER, CO2 type as per IS: 15683 complete with all accessories as per Manufactures Specification. ISI Mark complete in all respect.
-
-
-
... More
4.5 Kg. Capacity
6
7150
-
... More
(C )ELECTRICAL WORK
-
-
-
... More
Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.:-
-
-
-
... More
6/10amp. One Way Modular Switch (One Module)
310
44
-
... More
6amp. 2/3 Universal Modular Shuttered Socket (two Module)
120
67
-
... More
Step type Modular Electronic Fan Regulator 100watts (Two Module)
96
299
-
... More
Bakelite Batten Holder (Large size)
25
41
-
... More
Supply and erection of Modular Cover Frame (Complete set) on the existing metal box including fixing and connection of existing switches and sockets and other petty material etc:-
-
-
-
... More
Modular Cover Frame One or Two Module
10
50
-
... More
Modular Cover Frame Three Module
10
64
-
... More
Modular Cover Frame Four Module
70
72
-
... More
Modular Cover Frame Six Module
4
92
-
... More
Modular Cover Frame Eight Module
10
122
-
... More
Modular Cover Frame Twelve Module
46
175
-
... More
CAPACITORS & BALL BEARINGS:
-
-
-
... More
Supply and erection of Capacitors of different capacity for ceiling fans, exhaust fan & street light fittings etc.:-
-
-
-
... More
Capacitor 2.5µF
60
44
-
... More
Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-
-
-
-
... More
Overall size 1.5sq.mm (Un-sheathed)
1600
24
-
... More
Overall size 10sq.mm (Un-sheathed)
150
120
-
... More
MINIATURE CIRCUIT BREAKERS:
-
-
-
... More
Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-
-
-
-
... More
MCB Single Pole 6-32amp. (10kA, Curve-C)
48
190
-
... More
MCB Double Pole 40amp. (10kA, Curve-C)
7
789
-
... More
HEAVY GAUGE WELDED CONDUIT PIPES:
-
-
-
... More
Supply & erection of Heavy guage welded conduit pipe (ISI marked) as per IS:9537:Part-II for wiring purposes including bends, junction boxes, Steel hooks, GI saddle clamps and other petty materials etc., where necessary including painting as per PWD General Specifications:-
-
-
-
... More
Supply & erection of 19/20mm dia. M.S. conduit pipe (1.6mm thick), White painted suspension rod for ceiling fan.
30
131
-
... More
SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's:
-
-
-
... More
Supply and erection of sheet metal Double Door Distribution Boards IP 43-IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-
-
-
-
... More
TP&N Horizontal Double Door Distribution Board 6 way each
2
3592
-
... More
Supply and erection of AC Ceiling Fan 1200mm (48")-3star suitable for 230 V single phase with double ball bearing, copper wound, full aluminium body 3Nos of blades, white in colour. The mounting type is down rod mount. The product should possess a minimum air delivery of 218 CMM. The rated speed of the the product must be minimum of 350 revolutions per minute and 5Nos. of speeds. The product should be complete in all aspects with fan motor, bladeset down rod, conopy set, shackle kit, twisted wire etc., including erection & testing of ceiling fan having connection with PVC insulated PVC sheathed two single core copper conductor (FR) cable 0.75 sq. mm complete in all respects as per satisfcation of the Engineer in-charge at site.
30
3520
-
... More
Supply and erection of Heavy duty Exhaust Fan 300mm, 900RPM with aluminium louver shutter, double ball bearing longer life including flexible wire & petty material etc. for connections and testing complete in all respect as approved and desired by the Engineer in- charges at site.
12
4834
-
... More
Supply and erection of LED batten 20 Watt LED (including constant LED driver) with High quality extruded aluminium with efficacy of LED fixture minimunm 100 lumens per watt and operating voltage between 140 to 270 volt, THD <10% ingress protection IP20 (as per latest BIS standards) surge protection - 2.5 KV and above (as per IS/IEC standards) wattage of each low power LED less than 1 watt input AC frequency 50 Hz ± 3 % with 5 year warranty including there drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No: AT/2021/GL/1410-1422, Dated: 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited laboratory.
56
618
-
... More
Supply and erection of LED batten 40 Watt LED (including constant LED driver) with High quality extruded aluminium with efficacy of LED fixture minimunm 100 lumens per watt and operating voltage between 140 to 270 volt, THD <10% ingress protection IP20 (as per latest BIS standards) surge protection - 2.5 KV and above (as per IS/IEC standards) wattage of each low power LED less than 1 watt input AC frequency 50 Hz ± 3 % with 5 year warranty including there drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No: AT/2021/GL/1410-1422, Dated: 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited laboratory.
100
814
-
... More
Supply and erection of LED Flood Light 80w (including LED driver) in aluminium pressure die cast housing with toughned glass cover (IP66 Protection) and secondary lenses with IP66 protection having efficiency of LED fixture minimum 120 lumens per watt and operating voltage between 140 to 270volt, input frequency 50Hz + 3% complete along with erection of the same with connections, testing etc. Flood light should install on existing parapet complete in all respects as approved and desired by the Engineer-in-charge at site. The certification and Specification of the LED fitting should be as approved by O/o Advisor(Technical), Govt. of Punjab vide Letter no. AT/2021/GL/1410-1422 Dated 06/05/2021.Besides this the lighting fixture manufacturer should have inhouse NABL accredited lab.
6
4750
-
... More
Supply and erection of LED Flood Light 120 watt, AC supply voltage 140-270 volts, 50Hz ± 3% (including BIS Certified potted single diver with screen or laser printing logo LED driver) with pressure die cast or extruded aluminium housing with control gear (IP 66 protection), THD<10%, CRI minimum 70, High power LED (with wattage 1 to 5 watt) with mandatory secondary lenses, toughened glass fitting, 4 KV SPD within driver and 10KV external SPD, Min IK07, efficacy of LED fixture minimum 120 lumens per watt, 5 year warranty including their drivers complete in all respects as approved and desired by the Engineer in-charge at site. LED Fittings as per specifications approved by Hon'ble Technical Advisor to Punjab Govt. vide Letter ION No: AT/2021/GL/1410-1422 Dated: 06.05.2021. Besides this the lighting fixtures manufacturers should have in house NABL accredited lab.
8
7061
-
... More
Supply and erection of SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirm to IS:14772 (Recessed/ On surface), robustly constructed, safe & shock proof, rust & tamper proof of suitable inner & outer dimensions with ± 10% tolerance in size & hinged water tight cover with locking arrangement having 1No. terminal strip with 4Nos. terminals & 1No. Single pole MCB of required capacity fixed on din bar (Din Bar Provision for 2Nos. MCB's) complete in all respect as approved and desired by the Engineer In-Charge at site:-
-
-
-
... More
SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirm to IS:14772, inner dimensions 200mm x 140mm x 95mm with hinged water tight cover with locking arrangement
14
847
-
... More
XLPE INSULATED ARMOURED CABLES (ON SURFACE):
Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS:7098 (Part-1)1988 to be laid (On Surface) as per PWD General Specifications:-
-
-
-
... More
Overall size 6sq.mm (2Core) Armoured (On-Surface)
320
122
-
... More
SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's:
-
-
-
... More
Supply and erection of sheet metal Double Door Distribution Boards IP 43-IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-
-
-
-
... More
TP&N Horizontal Double Door Distribution Board 4 way each
1
2914
-
... More
MINIATURE CIRCUIT BREAKERS:
-
-
-
... More
Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-
-
-
-
... More
MCB Double Pole 6-32amp. (10kA, Curve-C)
4
580
-
... More
MCB Four Pole 50, 63amp. (10kA, Curve-C)
1
1750
-
... More
MS SHEET ENCLOSURE FOR MCCB's:
-
-
-
... More
Supply & Erection of indoor type MCCB enclosure of suitable size having provision for MCCB with extended rotary handle. The Enclosure shall be made from 14/16 SWG CRCA sheet, confirming to IS 8623/1977-82. The door should be double folded without edge and the gasket should be ‘S’ type puffed neutral rubber gasket for long life. The hinges of the door should be bolted type with double hole arrangement. The Enclosure door lock should be quick openable type spring loaded. There should not be any special tool or key to open the lock. The Enclosure will be wall mounting type having provision for cable entry from bottom/top with cable glands etc. The sheet metal is sprayed with corrosion resistant etch primer. The finishing treatment shall be applicable with air drying paint (7/9 tank Powder coated process should present in company pemises) after necessary putty work:-
-
-
-
... More
MS Sheet Enclosure having provision for MCCB 40-160Amp.with extended rotary handle (Approx. Size 500mm x 300mm x 200mm)
1
3342
-
... More
MCCB's (FOR PANELS & SHEET ENCLOSURE):
Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader terminal links, Extended rotary handle and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc:-
-
-
-
... More
MCCB Four Pole 63/80/100amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
1
7744
-
... More
SHEET METAL CUBICAL PEDESTAL, TOWER STRUCTURES, HT & LT LINE ITEMS, MS CHANNELS, BRASS GLANDS, ALUMINIUM & COPPER THIMBLES: CUBICAL PEDESTAL:
-
-
-
... More
Supply and erection of Sheet metal cubical pedestal made from 50mmx50mmx6mm thick MS angle iron frame with 5 sides welded & covered with MS sheet 2mm thick & front side hinged with 4" hinges & locking system with single/ double door openable placed on MS strip of size 12.5mm x 2.5mm thick welded with MS sheet, 4Nos. legs of 50mmx50mmx6mm thick MS angle iron each of 600mm long with MS sheet 100mmx100mmx6mm thick at the bottom end of the legs. Front door welded x-sectionally with MS flat 25mmx5mm. The front side with MS sheet each 75mm wide & a bend of 75mm width outwards & inwards on all sides with tappered top 200mm high and pedestal with 4 Nos. supporting members each of MS flat 50mmx6mm thick according to cubical size duly welded & complete pedestal to be painted with 1 coat of red oxide & 2 coats of paint & bonding to the existing earth. The Pedestal platform should be filled with 1:2:4 cement concrete mixture and erected 150mm high from the top of the cement concrete platform. The job is to be completed as approved by Engineer-in-charge:-
-
-
-
... More
Cubical Size 900mm high, 600mm wide and 350mm deep with platform dimensions 700mm x 450mm x 450mm
1
12641
-
... More
G.I. EARTHING:
-
-
-
... More
Earthing with G.I. wire/ rope in G.I. pipe partly recessed and partly on surface complete with 150cm long 50mm dia. G.I. earth pipe (Cutting threads and 36 Nos. holes, 1cm dia. to make a mesh around the GI Pipe) with G.I. reducing socket including erection of the same, 4.50 metre (14.76 feet) below ground level with 20Kg. charcoal & salt mixture etc., up to 8 metre in length (including boring & refilling).
-
-
-
... More
Earthing with 7/14 S.W.G. (7/2.18mm dia.) G.I. rope in 20mm dia G.I. pipe with G.I. reducing socket 50mm x 20mm (upto 8Metre in length)
2
3687
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements