Border Security Force Tender

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Supply and fixing of Polycarbonate Thermoplastic Junction Box for outdoor type IP-67/69 Protection Min. Size 155 x 210 x 92. The Junction Box shall be UV resistance test IEC 61439-1,anti-acid, anti corrosive, glow wire test 960 degrees as per IEC 60695 – 2 – 11 : Flame – retardant & Self-extinguishing ,Weather Proof, Rust Proof, Dust Proof, Rainwater Proof, mechanical load shall be IK08 (5 Joule) Accordance IEC 62262. The Junction box RAL 9011 colour Black. The junction box Lid fasteners shall not have screws but shall be with quarter turn locking knobs – which is well visible ( open – locked), and they will be sealable without any accessories and Four Side Walls shall have knockouts for cable entry & Provision for Din Rail. The gasket shall be internally embedded made of polyurethane. The Junction Box shall be with complete all accessories ( Cable Glands Syntec Threaded Cable glands IP 68 with Lamellar technology for 35 Sq.mm 3.5 Core Cable - 2 Nos and 4 Sq.mm 4 Core - 1 Nos, TPN Terminals - 1 No 63A , Pole mounting Clamp and nut bolts etc) including connection, testing, commissioning complete etc as reqd. Make-Hensel/Schneider/ABB/Siemens or as approved by Engg-In-Charge

Supply and pouring of ISO-FILL BRW two components Gel, suitable for Low voltage. The Gel is halogen & silicon free, having Mini. self life of 2 years. Gel should be re-enterable cold curing 2-component non-urethane encapsulating type. The gel can also be used in telecommunication & sealing of electronic parts especially where no mechanical stress is allowed (even at very low temperature, i.e < -50°C). The Gel should have dielectric strength of 10 kv/mm and should withstand temperature of 1000c ( long time)-1400c ( short time). Make-Hensel /Schneider / 3M