Baba Farid University Of Health Sciences Tender
... More
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Technical
Technical
Financial
Class Of Bidder
... View More
The class eligibility requirement to bid or participate in this tender is that the contractor should have a registration of an appropriate class with the construction departments of the relevant government authority. However, the specific class is not specified.
Technical Capacity
... View More
The required prior work experience for the bidder is determined by their available bid capacity, which is calculated based on their past work experience. The assessed available bid capacity is calculated as (A * N * 2 - B), where A is the maximum value of Civil Engineering works executed in any one year during the last five years, N is the number of years prescribed for completion of the Project/Works, and B is the value of existing commitments and on-going works. For works above Rs. 2.00 Crore, the bidder must provide details of their available bid capacity with an undertaking that this capacity is more than the total value of their financial bid. The calculation of available bid capacity considers the maximum value of Civil Engineering works executed in any one year during the last five years, implying that bidders with experience in executing larger value projects will have a higher available bid capacity. There is no specific percentage of similar works completed mentioned in the context of prior work experience requirements. However, for material consumption, permissible variations are mentioned as 5% for works costing up to Rs. 21 lacs, 4% for works costing from Rs. 2 lacs to Rs. 5 lacs is not mentioned in this context but 3% for works costing more than Rs. 51 lacs. The prime Civil contractor should have satisfactorily qualification criteria of similar nature of work, but no specific value or percentage of similar works completed is mentioned.
Costs
EMD
₹ 4,17,000Document Cost
₹ 5,900Tender Fee
₹ 5,900
Summary
Construction Of Service Block For Super Speciality Block In Ggsmch, Faridkot
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_DMER_135267_1Tender No
BFUHS/29/2025Tender Authority
Baba Farid University Of Health Sciences ViewPurchaser Address
-Website
http://http://www.bfuhs.ac.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Construction of Service Block for Super Speciality Block in GGSMCH, Faridkot
Construction of Service Block for Super Speciality Block in GGSMCH, Faridkot
Financial bid for construction of Service Block for Super Speciality Block in GGSMCH, Faridkot
BOQ Items
... More
Reinforced cement concrete M-25 mechanicaly batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.
343.71
6068
2085659.78
... More
Reinforced cement concrete M-25 mechanicaly batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in supersturcture.
183.15
6818
1248731.35
... More
Extra rate for First Floor
22.14
190
4221.66
... More
Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)
383.46
221
84832.86
... More
Centring and shuttering for columns (Square or rectangular or poly gonal in plain)Total Ground Floor
365.36
502
183597.05
... More
Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. Total Ground Floor
1803.51
563
1016494.31
... More
Centring and shuttering for sides and soffits of beam, beams launchings girders bressumers, lintels Total Ground Floor
391.6
400
156769.23
... More
Centring and shuttering for carbels, parapet, fascias and other similar items including edges.
177.12
547
97029.88
... More
Extra for First Floor
103.36
3
326.62
... More
Plastering on underside of ceiling 10 mm thick cement plaster 1:4
603.96
172
104346.17
... More
First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth.
700.54
5157
3613357.3
... More
Damp proof course 4 cm thick of cement concrete 1 : 2 : 4 with 2 coats of bitument 20/30 penetration at 1.65 kg per Sqm. laid hot and sanded.
47.33
358
16983.9
... More
First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level.
118.8
5020
596393.82
... More
Total Ground Floor + First Floor
4.29
153
659.84
... More
First class burnt brick work laid in cement sand mortor 1:4 in first storey upto 4 metres above plinth level.
3.82
5822
22241.3
... More
115 mm thick brick wall with every fourth course reinforced with hoop iron laid in 1 :4 cement sand mortar in super structure. Ground Floor
30.36
674
20469.93
... More
12.5mm thick cement plaster 1:5.
1395.21
190
266038.64
... More
20 mm thick cement plaster 1:5.
1395.21
263
367470.41
... More
12.5 mm thick cement plaster 1:4.
1286.18
249
320258.82
... More
20mm thick cement plaster 1:4.
272.9
273
74750.04
... More
Embedding 100mm dia CI rain water non pressure ISI mark pipe in cement mortar during masonry work.
49.32
128
6338.61
... More
Providing and fixing cast iron shoe for rain water pipe on wooden plugs fixed on wall face including filling the joints with spun yarn and cement mortar 1:2.
8
142
1137.76
... More
Providing & Fixing in position M.S or heavy flat iron clamps made out of M.S flat iron not less than 5 mm of the approved design for fixing C.I. soil waste, vent or antisyhonage pipes to walls complete in all respects including cutting and making good the walls and floors etc. and painting. M.S. Holder bats clamps for 100mm i/d H.C.I. pipes
27
217
5863.59
... More
Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16.
12
100
1210.56
... More
Providing and fixing in position gratings 150mm x 150mm for gully trap.
PVC grating
12
101
1218.12
... More
Bottom Khurra on ground 1.2m. x 0.6m. consisting of brick on-edge laid in cement mortar 1:3 over 75mm cement concrete 1:8:16 including 12.5m.m. thick cement plaster 1:3.
12
713
8558.52
... More
Terracing consisting of tiles 22.86 cm x 11.43 cm x 3.81 cm laid over 25mm mud plaster, 75 mm mud filling on another layer of 25 mm mud plaster including two coats of bitumen laid hot @ 1.65 Kg. per Sqm. on top of R.C.C slab including grouting with cement
530.12
758
402106.62
... More
Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.
90.06
68
6166.41
... More
Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% taking outside the premises in 15 cm layers incluidng ramming, watering and consolidated all lead .
646.89
450
291100.5
... More
Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate and 100mm sand filling (Using mechanical mixer for mixing of material)
1320.92
424
560809.8
... More
Providing and laying vitrified floor tiles of Size 600 x 600 mm in different sizes in light colour shades made using Soluble Salt Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. (Soluble salt Print Penetration should be up to 1 to 2 mm after the tiles are fired & polished ).
Ground Floor
49.16
789
38790.68
... More
Conglomerate floor 50mm thick cement concrete topping 1:2:4 (Using mechanical mixer for mixing of material).
974.54
364
355229.58
... More
Extra labour for projected nosing of stair case of any shape and design
21.94
67
1479.19
... More
Kota stone tile flooring 20mm to 30 mm thick over 12.5mm thick base of cement mortar 1:3 (1 cement, 3 Sand) laid and jointed with neat cement slurry, mixed with pigment to match the shade of stone including rubbing and polishing.
1.3
1155
1502.38
... More
Kotah stone tile 20mm thick in skirting, riser of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 Cement and 3 Sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone including rubbing and polishing
Ground Floor
3.74
1406
5260.01
... More
50mm thick ironite (Metallic Floor Hardener to be mixed with Granolithic topping for heavy duty floors) floor consisting of 40mm thick cement concrete 1:2:4 base and top layer 10mm thick laid with one part of ironite and grey cement mixed together in the ratio of 1:4 by weight to two parts of hard granite chippings 6mm gauge by volume finished smooth with hard rubbing.
459.75
822
378273.11
... More
20mm thick grey polished skirting or dado consisting of bottom layer of 16mm thick cement sand plaster 1:3 and finished 3mm thick topping of neat cement rubbed and polished including rounding of junction with floors.
20.11
596
11991.19
... More
Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2191 Part-I) 1973,
Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:-
35mm Thick
9.41
2430
22870.25
... More
Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt)
9.41
115
1090.43
... More
Providing and fixing aluminium sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :
300mm x 16mm
3
209
628.92
... More
Supplying and fixing rolling shutters of approved make, made of 80mm x 1.25mm M.S. Laths, interlocked together through their entire length, and jointed together, at the end by end locks, mounted on specially designed pipe shaft, with brackets, side guides 27.5 cm long wire spring grade No. 2 and arrangement for inside and outside locking, with push and pull operation complete, including top cover 0.80mm thick (payment is to be made for the exact size of opening; where rolling shutter is to be fixed).
18.39
2946
54188.53
... More
Cold twisted deformed (Ribbed/ Tor Steel Bar/TMT) Bars Fe 500 grade as per IS 1786-2008, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete
574.29
7476
4293908.9
... More
Total Ground Floor + First Floor
15.57
13
213.15
... More
Supplying and fixing of Pressed steel sheet frames (Chowkat) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section (standard design latest), including iron lugs (hold fasts) iron hinges conforming to PWD specifications including bolts for fixing steps, lock notch provision for receiveing tower bolts and finished with 2 coats of ready mixed painted lead non setting primer of approved quality, fixed in position including the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete
Doors and windows frame of size 113mm x 60mm with 35 mm wide single rebate weighing 3.38 kg per meter.
27.4
783
21476.12
... More
Doors and windows frame of size 151mm x 60mm with 35 mm wide double rebate weighing 3.95 kg per meter.
546.1
963
526069.05
... More
Providing & fixing of Box type steel windows, made of various ERW section outer 60mm x 25mm, central mullion 60mm x 25mm, for shutter 50mm x 20mm having thickness of 1.25mm (18 gauge), shash bar MS Tee 25mm x 3mm where required joints mitred and electrically flash-welded, with iron fittings incluidng necessary iron handles,hinged cleat, tower bolts, iron hold fast and pintle hinges complete (excluding glazing and wire guage) and finished with ready mixed paint red lead non setting primer complete as per specification, Drawings and to the entire satisfaction of engineer-in-charge. (Note:- Glazing, wire guage and grill will be paid as per respective items)
1573.63
134
212188.27
... More
Wire gauge fixed on steel windows of standard rolled steel section, with 3mm thick flat iron cover moulding of 12.5mm width, fixed with machine screws, complete in all respects.
24.1
795
19168.9
... More
Extra for providing & fixing Steel Tube beading size 12mm x 12mm, 18 guage of approved shape and section with screw for fixing of glass panes in stead of glazing clips and metal slash putty in steel doors, windows & Ventilators complete in all respect
158.1
58
9326.32
... More
Wrought iron and mild steel ladders, framed grills, grating etc. with ends of bars, riveted or welded or forged, framed window guards, barred iron doors, stair case, iron railing including cost of bolts and nuts or screws or welding rod, complete fixed in position.
7.78
10682
83109.77
... More
Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make. Glass panes 4mm thick above 0.40 sqm area.
48.19
629
30359.22
... More
Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two coats to get required finish
1320.43
84
111285.84
... More
Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface
774.63
22
17134.82
... More
Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two coats)
774.63
93
72629.31
... More
Applying priming coat with metal primer on new steel or iron work including preparation of surface.
With ordinary quality Paint
825.47
25
20867.88
... More
Painting two coats excluding priming coat with ready mixed paint for metallic surfaces in all shades on steel or iron work
With ordinary quality paint
354.85
65
23175.25
... More
Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete.
14.11
45
639.18
... More
Finishing walls with Premium Acrylic smooth exterior paint with silicon additives of required shade with two coats applied @ 1.43litre/10 sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 sqm
545.8
95
52320.39
... More
Construction of Plinth protection complete as per drawing.
Earth work in exavation in foundations, trenches, etc. in all kinds of soil where pick jumper work is not involved and not exeeding 2.0 Mtr. depth and subsequent filling around masonary in 15 cm layers with compaction including disposal of all surplus soil as directed within a lead of 30 Mtr. complete in all respect as per specifcation, drawing and to the entire satisfication of Engineer-In-Charge.
19.77
191
3790.5
... More
Cement Concrete 1:8:16 with 40mm guage stone aggregate using concrete mixing volumetric type
6.59
3290
21681.63
... More
First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth.
33.83
5281
178662.66
... More
Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate and 100mm sand filling (Using mechanical mixer for mixing of material)
93.75
492
46184.06
... More
Conglomerate floor 40mm thick cement concrete topping 1:2:4 (Using mechanical mixer for mixing of material).
115.38
320
36951.6
... More
Floating coat of 1.5mm thick neat cement laid in one operation to the topping.
115.38
30
3524.86
... More
12.5 mm thick cement plaster 1:5 complete in all respect as per specifcation, drawing and to the entire satisfication of Engineer-In-Charge.
57.69
183
10557.27
... More
Sub Work-1 Internal Water Supply, Sewerage, Sanitation
Sub Head-1 Internal Sewerage System
Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing Single Socket Type B
110mm o/d SWR UPVC pipe lines laid complete
50
645
32256.5
... More
160mm o/d SWR UPVC pipe lines laid complete
20
396
7923
... More
Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joiningFor 160mm i/d pipes
Door Elbow 90 degree (all side socket)
4
338
1352.68
... More
Coupler
4
215
863.32
... More
For 110mm i/d pipes Coupler
4
74
298.84
... More
Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. P Trap/Floor Trap 110mm x 75mm
2
309
619.98
... More
Providing PVC solvent cement joints to SWR Pipes and specials including cost of PVC solvent cement and tools etc of approved make (to the approval of Engineer-in-charge )
160mm o/d for new line
30
121
3643.2
... More
110 mm for pipe line
12
101
1215.24
... More
Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm.100mm internal Diametre HCI gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm
2
2466
4933.54
... More
Construction of brick masonry inspection chambers size as given below upto 0.60 m average depth in 1:5 cement sand mortar, lime concrete with 40 per cent lime mortar 2:3 in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside light duty C.I. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design.450mm x 600mm inside with 455mm x 610mm cover and frame light duty double seal
3
12120
36361.53
... More
Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B-Class Premium make such as (Jindal Hisar) including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete. 50mm i/d for FT to FT etc.
10.5
790
8304.98
... More
Sub Head-2 Internal Water Supply System
CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge.
16mm i/d
12
188
2259.36
... More
20mm i/d
35
233
8161.65
... More
25mm i/d
39
301
11740.17
... More
32mm i/d
20
402
8056.4
... More
40mm i/d
22
532
11710.6
... More
50mm i/d
23
790
18191.85
... More
Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) B- Class,premium make such as (Jindal Hisar) including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete.
80mm i/d Vertical in Ducts
10
811
8115.2
... More
Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes lines and making good the same to its original condition. Size 75mm x 75mm qty same as GI P 15mm i/d to 25 mm
60
72
4361.4
... More
Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required.
Through wall 11.43 cm thick
8
176
1411.28
... More
Through wall 22.86 cm thick
8
251
2013.68
... More
Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect.
15mm i/d G.I. Union
8
95
760
... More
20mm i/d G.I. Union
8
158
1268.64
... More
25mm i/d G.I. Union
4
200
801.92
... More
32mm i/d G.I. Union
4
258
1034.08
... More
40mm i/d G.I. Union
4
342
1371.88
... More
50mm i/d G.I. Union
4
437
1751.52
... More
Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete.
40mm i/d Brass Ball valves
4
1101
4407.24
... More
50mm i/d Brass Ball valves
4
1796
7184.96
... More
Sub Head - 3 Sanitary Installation
Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer in charge ) consisting of 10 ltr. PVC flushing cistern, PVC short bend 32mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer in charge.
2
5035
10071.46
... More
Providing and fixing jet spray with 2'-6" long PVC pipe.With PTMT nut
2
381
762.72
... More
Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect.
2
87
174.88
... More
Providing and fixing in position vitreous Chinaware white large flat back or angular lipped front urinal 610 mm high of approved make (to the approval of the Engineer-in-charge) (610 mm x 410 mm x 380mm) consisting of C.P. waste 32 mm dia and C.P. brass spreader, complete.
2
6901
13802.94
... More
Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap complete in all respect.
Size 550 mm x 400 mm
2
2046
4093.9
... More
Providing & fixing in position best Indian make PVC flexible tube connection.
PVC tube connection of size 15 mm x 375 mm with PTMT nut
6
122
733.2
... More
Providing and fixing PVC waste pipe 32mm complete in all respect.
2
119
238.08
... More
Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect.
C.P. brass towel Rails size 15mm dia 600mm long
2
1621
3242.66
... More
Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect.
2
888
1776.2
... More
Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect.
C.P. brass Bib cock long nose/ long body without flange
2
1214
2429.36
... More
C.P Brass bib cock without flange
2
966
1932.1
... More
Providing & Fixing in postion stop cock / Angle valve (as approved by the Engineer-in-charge). C.P.brass 15mm Angle valve
6
845
5075.76
... More
C.P.brass 15mm Concealed stop cock with flange
2
1268
2536.82
... More
Providing & Fixing in position C.P. Brass flange of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect.
12
87
1049.28
... More
Providing & Fixing in position C.P. Brass extension piece 25mm long to 50mm long of approved make (to the approval of Engineer-in-charge )with various fixtures complete in all respect.
12
112
1352.64
... More
Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge)
2
1263
2526.28
... More
Providing and fixing in position paper holders of approved make (to the approval of Engineer-in-charge ) fixed in to wall with C.P brass screws complete in all respect.
C.P. brass toilet paper holder
4
1141
4567.96
... More
Providing & Fixing in position C.P./Aluminium Khunti of approved make (to the approval of Engineer-in-charge ) fixed into wall with C.P. brass screws and rawl plugs etc. complete in all respect.
C.P. Brass khunti with 3 pegs
4
386
1546.52
... More
Sub Head-4 Flooring and Wall Tile
Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand fillingGround Floor
6.69
492
3295.69
... More
Cement Concrete 40mm thick cement concrete topping 1:2:4 (Using mechanical mixer for mixing of material). (Under floor tiles)
6.69
304
2033.76
... More
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 250 x 330 300 x 300mm mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
11.71
736
8623.13
... More
Coloured Granite stone tiles 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps.
1.11
3453
3833.24
... More
Extra labour for projected nosing of stair case of any shape and design
3.05
67
205.63
... More
Sub Head-2 Estate Water Supply Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect. Earth work upto 1.5 m. Depth All classes of soil except rockyFor 80mm pipe line
50.29
178
8955.14
... More
Providing, Stringing out, cutting, Jointing and testing of ISI Marked D.I. Pipe (S&S) as per IS 8329 and laying the same in trenches to correct alignment and gradients, jointed with rubber tyton joints fitted complete including all cartage.
D.I. Pipe as per IS 8329 DI-K9
80mm i/d pipe lines laid complete
76.2
961
73277.73
... More
Supplying and laying D.I. specials/fittings as per IS:9523-2000 (ISI marked with the prior approval of Engineer-in-Charge), class K-12 suitable for tyton joint with external bitumen coating and inside cement mortar lining, scaffolding, tools and plants, ropes, guys, etc. Complete in all respects. D.I. specials upto 300mm i/d
70
122
8540
... More
Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge).
Class PN-1 as per ISI80mm i/d Sluice Valves flanged
3
4430
13291.92
... More
Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department. Size 0.6 m. x 0.6 m.
3
5589
16769.46
... More
Providing & fixing C.I indicating plates of size 100mm x 100mm for SV/FH including synthetic enammel paint & letters in white enamel paint , fixing in the ground with angle iron of size 25x25x5mm, 230mm height from ground including concrete block complete in all respect as directed by Enginner-in-Charge.
3
252
756.57
... More
Providing, fixing and jointing Cast Iron surface box for Sluice valve, Air valve, Fire hydrant etc. including all carriages complete.
9
71
647.73
... More
Estate Sewerage Sub Head-1 Estate Sewerage Excavation manually in trenches with straight or open cutting in a built up street/ lanes having wall to wall width upto 3 metre for sewers and manholes to full depths as shown in drawings, including shoring, dressing to correct sections and dewatering of rain water, provision for diversion for traffic, protection of existing services i.e. telephone cables ,electric lines, water supply lines and gas lines etc. night signals, profiles, pegs, sight rails, boning rods, fixing and maintenance of caution boards, fencing, refilling trenches, watering, dressing and restoration of surface to original level and removal of surplus spoils from the site of works upto 15 metre, for all works other than connections to complete in all respects. For depths not exceeding 2.0 metre B.G.L.
For all classes of soil except rocky. For Sewer Line 150 mm dia as per Detail attached
73.81
235
17417.68
... More
Cement concrete 1:6:12 with brick ballast 40mm gauge using concrete mixer.
7.69
3466
26653.62
... More
Constructing brick masonry manhole in cement mortar 1:5 ( 1 cement : 5 coarse sand ) R.C.C. top slab 20cm thick using M-20 mix by using mixer and vibrator, TMT Fe500 @ 63.464 kg/per cum, foundation concrete 1:4:8 mix (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making 40mm thick benching in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, Orange coloured PVC steps including RCC cover with frame complete as per standard design complete in all respects.
Inside size75x120cm and 120 cm deep
2
42337
84674
... More
Extra for making connections of all sizes newly laid sewers within benching of fully charged sewers including pluging of sewer, dewatering & desilting of manholes etc. complete in all respects.
1
741
741.66
... More
Fire Fighting Arrangements Providing and fixing of FIRE EXTINGUISHER CO2 type as per IS:15683 complete with all accessories as per manufactures sepcification. ISI Mark Complete in all respect.
4.5kg capacity
12
7150
85802.16
... More
Providing and fixing of FIRE EXTINGUISHER ABC powder type (Stored pressure) as per IS:15683 complete with all accessories as per manufactures sepcification. ISI Mark Complete in all respect.
6kg Capacity
12
2939
35271.12
... More
Roof Top Rain water Harvesting
Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.
200mm o/d pipe of 4 Kgf. / sqcm
45.72
667
30505.76
... More
160mm o/d pipe of 4 Kgf. / sqcm
66
430
28407.72
... More
Excavation in trenches with straight or open cutting in streets, lanes or in open area with 3D/JCB or excavator including manually dressing bed, trimming sides and side slopes for sewers and manholes to full depths as shown in drawings,including, dressing to correct sections and dewatering, provision for diversion for traffic, protection of existing services i.e. telephone cables, electric lines, water supply lines and gas lines etc. night signals, profiles, pegs, sight rails, boning rods, watching, etc., fixing and maintenance of caution boards, fencing, refilling trenches, watering, ramming and restoration of surface to original level and removal of surplus spoil from the site of works, upto one chain (15m) complete in all respects.For depths not exceeding 2.0 metre B.G.L.
For all classes of soil except rocky
130.3
235
30748.19
... More
Construction of Haudi internal size 0.90mtr x 0.90mtr & 0.90mtr depth in Brick masonary 1:5, bed 40mm thick cement concrete 1:2:4, 150mm thick base lean concrete 1:8:16, RCC Slab cover 75mm thick inside plaster, cement rendering & RCC man hole cover 450x600 mm clear inside opening rectangular RCC Manhole cover with frame Light Duty complete as per Drawing attached & as desired by the Engineer-in-charge Haudi Inside size 90x 90 cm and90 cm deep
3
7333
21999
... More
Construction of Haudi internal size 0.45mtr x 0.45mtr & 0.45mtr depth in Brick masonary 1:5, bed 40mm thick cement concrete 1:2:4, 150mm thick base lean concrete 1:8:16, RCC Slab cover 75mm thick inside plaster, cement rendering & RCC man hole cover 450x450 mm clear inside opening rectangular RCC Manhole cover with frame Light Duty complete as per Drawing attached & as desired by the Engineer-in-charge No. of Haudi @ 5mtr. C/c Distance of Rain water Pipe line
11
2820
31020
... More
Construction of Rain water recharge well 3.00mtr dia with working depth 3.50mtr dia consisting of drilling bore 300mm dia 100mtr, supplying and lowering pvc perforated housing pipe 200 mm dia 10kgf/sqcm 50mtr sorrunded with filtermedia , galvanised stainer CI pipe Class LA 150mm i/d 4mtr duly plugged from top with bail plug, fixing MS clamp, MS socket, Well size 3.00 mtr internal dia, 2.90 mtr deep constructed with BB in 1:5 cement sand mortar,plastered from inside, RCC slab, filtered media in 3 Layers, 2Nos RCC Man hole cover conneted with collecting chamber size 1mtr x 1mtr x 1.20 mtr deep providing and fixing MS grating and all other relevent material required as per site complete in all respect as per drawing attached and entire satisfaction of the Engineer-in-charge . (Note :- Payment will be made as per CSR Based Rates Plus/Minus Quoted rates).
1
290319
290319
... More
Providing Internal Electrical Installations RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES:Supply & erection of Wiring fan point (With fan box) 34.02 I b (919.00 + 25% =Rs.1148.75 +5.35% = Rs.1210.20)
44
1210
53248.8
... More
Supply & erection of wiring light point 34.02 ii (579.00 + 25% =Rs.723.75 + 5.35 % = Rs.762.47)
90
762
68622.3
... More
Wiring 6Amp. Plug control comprising wall socket point RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES 34.02 (V) (282.00 + 25% Rs.352.50 + 5.35% = Rs.371.35)
18
371
6684.3
... More
Supply & erection of wiring 16Amp. Plug control comprising wall socket point RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES 34.02 (VI) (363.00 + 25% =Rs.453.75 + 5.35% = Rs.478.02)
21
478
10038.42
... More
Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge overall size 1.5 sq.mm (Un-sheathed) 34.09 ii (18 + 30 % = Rs.23.40 + 5.35% = Rs.24.65)
275
24
6778.75
... More
Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge overall size 4 sq.mm (Un-sheathed) 34.09 iv (39 + 30 % = 50.70 + 5.35% = Rs.53.41)
550
53
29375.5
... More
Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed) 34.12 X (48.00 + 40% = Rs. 67.20 + 5.35% = Rs.70.79)
275
70
19467.25
... More
Heavy Gauge PVC Conduit Pipe 32mm dia. (Flushed) 34.12 Xi (66.00 + 40% = Rs. 92.40 + 5.35% = Rs.97.34)
30
97
2920.2
... More
Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs MCB Single Pole 6-32amp. (10kA, Curve-C) 34.16 A ii (134.00 + 35 % = Rs.180.90 + 5.35% = Rs.190.57)
36
190
6860.52
... More
Supply and erection of sheet metal Iron Clad Switches on existing surface with G.I. bolts & nuts/ rag bolts and nuts etc., according to the size of holes in the body of the enclosure including connections with suitable size of thimbles and bonding to the existing earth as Per PWD General Specifications:-ICDP Switch 63amp., 415volts 34.18 (ii ( 2008 + 20% = Rs.2409.6 +5.35% =Rs.2538.51 )
1
2538
2538.51
... More
Supply and erection of sheet metal double door vertical distribution boards IP 43-IK09 metal door (dust protected) as per IS:8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars for each phase, 2 Nos. shrouded neutral bars, 2Nos. earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting MCCB's as incomer and outgoings SP/TP miniature circuit breakers in the distribution board as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etcTP&N Horizontal Double Door Distribution Board 4 way each 34.17 V (2406.00 + 15% = Rs.2766.90 +5.35% = Rs. 2914.92)
3
2914
8744.76
... More
Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- MCB Four Pole 50, 63amp. (10kA, Curve-C) CSR 34.16 A (XVI) (1231 + 35% = Rs.1661.85 +5.35% = Rs.1750.75
3
1750
5251.5
... More
Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid (On Surface) as per PWD General Specifications:- Overall size 35 sq.mm (3½ Core) Un armoured on-surface 34.10 C XXiii ( 170+ 25% = Rs. 212.50 + 5.35% = Rs.233.86 )
70
233
16370.2
... More
Supply and erection of SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirm to IS:14772 (Recessed/ On surface), robustly constructed, safe & shock proof, rust & tamper proof of suitable inner & outer dimensions with ± 10% tolerance in size & hinged water tight cover with locking arrangement having 1No. terminal strip with 4Nos. terminals & 1No. Single pole MCB of required capacity fixed on din bar (Din Bar Provision for 2Nos. MCB's) complete in all respect as approved and desired by the Engineer In-Charge at site:- SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirm to IS:14772, inner dimensions 140mm x 140mm x 95mm with hinged water tight cover with locking arrangement CSR 34.33 VI (a) (724 + 5.35% =Rs. 762.73 )
8
762
6101.84
... More
Supply and erection of LED flood light 100 watt Make Bajaj/ Crompton/ Havells Outdoor IP65 Rated Water of (Cool Day Light 6500K ) with inbuilt driver which protects against unstable power condition or sudden peaks in AC Voltage of upto 4KV, High Brightness & Energy Saving LED lights have a strong and high quality light output of upto 100 Lumens / watt AC220-240V, 50/60Hz . complete in all respects with 2 year warranty
8
6050
48400
... More
Earthing with electrolytic Copper Tape rivetted (with 5Nos. copper rivets)/Steel Nut & bolts (with 4Nos. 32mm long, 8mm thick with washer and double nut) to 30cm x 120cm x 2mm thick copper plate (made cylindrical) burried 4.50 metre (14.76 feet) below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the Copper Tape recessed in wall and in floor etc., up to 8metre in Length (including bore Length). G.I. pipe 20mm dia. (A-class), 3metre long should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation. Earthing with 25mm x 3mm Copper Tape (upto 8Metre in Length) 34.14 ii b (9906 + 40% = Rs.13868.40 + 5.35% = Rs.14610.35)
3
14610
43831.05
... More
Supply and erection of LED botten 40 Wott LED (including constant LED driver) with High quality extruded aluminium with efficoey of LED firture minimunm 100 lumens per witt and operating voltoge between 140 to 270 volt, THD 10% ingress protection IP20 (as per lotest 8iS stondards) surge protection 2.5 KV ond above (as per IS/IEC standords) wattage of each low power LED less than 1 wott input AC frequency 50 Nz t 3 % with 5 year worranty including there drivers complete olong with erection of the same with connections, testing etc, complete in all respects is approved and desired by the Engineer-in charge ot site: LED Fitting os per Specfications
75
1095
82125
... More
Supply and erection of Ceiling Fan 1200mm (48") with double ball bearing including flexible wire & petty material etc. for connections and testing complete in all respects as approved and desired by the Engineer in-charge at site. Makes: Crompton High Speed Opel White, Anchor XL code14067 WH, Havell's Velocity HS
44
2201
96844
... More
Supply and erection of Heavy duty Exhaust Fans 300mm, 900RPM with aluminium louver shutter, double ball bearing longer life including flexible wire & petty material etc. for connections and testing complete in all respect as approved and desired by the Engineer in-charges at site. Make: Crompton EXHD300-6-1, Havells Turbo Force SP, Anchor Anmol Heavy Duty
9
3501
31509
... More
PVC insulated & PVC sheathed aluminium conductor cable Overall Size 10mm² (1/1.40mm) Twin Core CSR 34.34 (ii) C(38 + 10% = Rs 41.80 + 5.35% =Rs 44.03 )
175
44
7705.25
... More
Supply & erection of Heavy guage welded conduit pipe (ISI marked) as per IS:9537:Part-II for wiring purposes including bends, junction boxes, Steel hooks, GI saddle clamps and other petty materials etc., where necessary including painting as per PWD General Specifications:-Supply & erection of 19/20mm dia. M.S. conduit pipe (1.6mm thick), White painted suspension rod for ceiling fan. CSR 34.11 XI ( 100 + 25 % = Rs. 125 +5.35% =Rs, 131.68 )
21
131
2765.28
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%