Baba Farid University Of Health Sciences Tender

Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-Heavy Gauge PVC Conduit Pipe 25mm dia. (On Surface) CSR 34.12 II (39.00 + 40% = Rs.54.60 + 5.35% = Rs.57.52)

Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. Below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:- Double Walled Corrugated HDPE Pipe 120/ 103.5mm (Outer/ Inner dia.) CSR 34.37 A IV (276 + 5.35% = Rs.290.76)

Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-Overall size 1.5sq.mm (Un-sheathed) CSR 34.09 II (18.00 +30% = Rs.23.40 + 5.35% = Rs.24.65)

Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-Overall size 4sq.mm (Un-sheathed) CSR 34.09 IV (39.00 + 30% = Rs.50.70 + 5.35% = Rs.53.41)

Supply and erection of LED flood light 100 watt with high pressure die cast housing lumens 110-120, AC220-240V, 50/60Hz(IP 65 Protected) of Make Havells / Cromption / Philips The fitting will be mounting with the help of necessary arrangement for installation on the top parapet of the building including connections, testing & commissioning etc. complete in all respects as per satisfaction and desired by the Engineer-in-charge at site.

Earthing with electrolytic Copper Tape rivetted (with 5Nos. copper rivets)/Steel Nut & bolts (with 4Nos. 32mm long, 8mm thick with washer and double nut) to 30cm x 120cm x 2mm thick copper plate (made cylindrical) burried 4.50 metre below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) Earthing with 25mm x 3mm Copper Tape (upto 8Metre in Length (9906 + 40% = Rs.13868.40 + 5.35% = Rs.14610.35)

Aluminium thimble cable Core size 300 sq.mm ( 116 + 5.35% = 122.20 )

Aluminium thimble cable Core size 150 sq.mm ( 52 + 5.35% = 54.78 )

Add Civil work for foundation and other work (Item as per CSR 2020)

Less Old DG Set 250 KVA

Supply, installation commesioning of 500 KVA Transformer Supply, installation Commesioning of Transformer 500 KVA IS 1180 level -1, ONAN type cooling, 3 phase, Tap Changer Off Circuit, frequency 50 Hz, Voltage HV/LV 11/0.415KV, off circuit tap changer Complete in all respect. Make:- Kirloskar, Cromption, ABB.

COPPER EARTHING (Upto 8 metre in Length): Earthing with electrolytic Copper Tape rivetted (with 5Nos. copper rivets)/Steel Nut & bolts (with 4Nos. 32mm long, 8mm thick with washer and double nut) to 30cm x 120cm x 2mm thick copper plate (made cylindrical) burried 4.50 metre (14.76 feet) below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the Copper Tape recessed in wall and in floor etc., up to 8metre in Length (including bore Length). G.I. pipe 20mm dia. (A-class), 3metre long should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:- Earthing with 25mm x 3mm Copper Tape (upto 8Metre in Length) 34.14 (ii) b (9906 + 40% = 13866.40 + 5.35% = 14610.35)

Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-Overall size 300sq.mm (3½ Core) Unarmoured (Loose) CSR 34.10 D XXXI ( 1029.00 + 25% = Rs.1286.25 + 5.35% = 1355.06

Supply & laying of Circular Aluminium Conductor screened with extruded semiconducting compound, XLPE insulated, insulation screened with extruded semiconducting combination in combination with copper tape (0.3KA for 1sec.) cores laid up, FR PVC inner sheathed, galvanized steel strip armoured and overall FR PVC sheathed cable confirming to IS:7098 (Part-2), 2011 working voltage 11KV(E) grade to be laid loose in the existing trench or pipe HT Cable Overall size 50sq.mm (3Core) 34.36 B ii ( 501 + 10% = Rs.551.10+ 5.35% = Rs. 580.58)

Supply and erection of pre-stressed cement concrete pole of suitable length with a given planting depth confirming to IS-1678/ 1960/1978 below ground level in excavated pit of suitable dimensions complete in all respect as approved by Engineer-in-charge at site:-PCC Pole Overall Length 11 metre, Planting depth 1.80 metre, W/L 400 kg CSR 34.32 III (7463.00 +15% = 8582.45 + 5.35% = Rs 9041.61 )

Supply & erection of 11kV GO switch confirming to ISI specifications. The item includes supply and erection of operating pipe and handle arrangement of MS flat 50mm x 6mm and channels 75mm x 40mm sheet. The GO switch is to be fitted with locking arrangement so as it locks upward on 'ON' position and locks downward in 'OFF' position. The entire GO switch assembly/unit should be properly earthed and the job is to be completed as approved by Engineer-in-charge.CSR 34.38 vii (8986.00 + 20% =10783.20 +5.35% = Rs.11360.10

Supply & erection of Die-cast aluminium clamp for making T-Line end terminal/ ends including cost of nuts & bolts etc. complete in all respect as approved by the Engineer-in-Charge:-Dead end clamps of die-cast aluminium size 20-100sq. Mm CSR 34.34 III A (339 + 30 % =440.70 +5.35% = Rs 464.27 )

Supply & erection of PVC insulated PVC sheathed aluminium conductor single core cable for providing jumpering arrangement on overhead lines:- Overall Size 70sq. mm (Aluminium Jumper) CSR 34.34 IV B (141 + 10 % = 155.10+5.35 % =Rs 163.39 )

Supply and erection of insulators confirming to IS-2544 & 5350 (Test Certificates of CPRI) includes supply and erection of nuts bolts and other accessories whatsoever required at site for fixing it to the structure pole. The job is to be completed as approved by Engineer-in-charge:-11kV Pin Insulator with G.I. Pin CSR 34.35 I b (202 + 5.35 % =Rs 212.80 )

11kV Disc Insulator CSR 34.35 I c ( 591 + 5.35% = Rs 622.61 )

11kV Lightning Arrester with clamps of required size (With seprate earth) CSR 34.35 I E ( 3359 + 5.35% =Rs 3538.70 )

Supply and erection of Stay Set consisiting of 19/20mm dia.of suitable length G.I. stay rod duly threaded upto 300mm at one end and shaped on theother end. MS plate size 30cm x 30cm x6mm with 20mm dia. hole drilled in the centre of the plate G.I. stay wire size 7/10 SWG, G.I. thimble for stay binding, Egg/Strain insulator, MS elbow made out of 16mm plain sheet and a 20cm long piece of 50mm x 50mm x 6mm angle iron made to the shape as approved by Engineer-in-charge. Stay set complete shall be fixed to the pole by providing suitable size full clamps made out 50mm x 6mm size MS flat with required number of nut and bolts 16mm dia. on one end and shall be embedded on the other end. The stay plate shall be covered with cement concrete having total volume of the concrete not less that 0.042Cum. The job shall include excavation of pit and back filling and after pouring concrete with excavated soil etc. as approved/ desired by the the Engineer-incharge:- Stay Set consisiting of 19/20mm dia., 2.4 metre Long G.I. Stay Rod CSR 34.35 II b ( 2953 + 5.35 % =Rs 3110.98 )

Earthing with G.I. wire/ rope in G.I. pipe partly recessed and partly on surface complete with 150cm long 50mm dia. G.I. earth pipe (Cutting threads and 36 Nos. holes, 1cm dia. to make a mesh around the GI Pipe) and with G.I. reducing socket including erection of the same, 10.50 metre (34.44 feet) below ground level with 20Kg. charcoal & salt mixture etc., up to 8 metre in length (including boring & refilling). Earthing with 8 S.W.G. (4mm dia.) G.I. wire in 15mm dia G.I. pipe with G.I. reducing socket 50mm x 15mm (upto 8 Metre in length) CSR 34.13 XIII a (2518 + 25 % = Rs.3147.50 + 5.35% = Rs. 3315.89 )

Fixing additional length of earthing with G.I. wire/ rope in G.I. pipe (On Surface) with sockets, elbows and MS saddle clamps including painting etc.Additional length G.I. rope 7/12 S.W.G. (7/2.80mm dia.) in 20mm dia. G.I. pipe (On Surface) CSR 34.13 XVI C (172 + 40 % =240.80 +5.35% = Rs. 253.68 )

Supply and Erection of MS angle iron (Channel)/ MS Flats of suitable size with cutting, bending and necessary holes as desired by Engineer-in-charge at site:-MS angle iron size 50mm x 50mm x 6mm thick CSR 34.38 XV B ( 312 + 20% =374.40 +5.35% = Rs 394.43 )

Supply & erection of 'D' iron clamp 50mm x 6mm flat iron complete with fixing bolts and nuts (16mm x 200mm) including making holes in the pole as approved by Engineerin- charge. CSR 34.38 VIII (156 + 20 % =187.20+5.35% = Rs 197.21

Supply and erection of M.S. Flat bracket made from 50mm x 6mm of length 600mm and width 300mm for installing metal halide flood light fitting on it. Bracket should be fixed with the existing pipe of cover shed with M.S. Flat clamp of size 50mm x 6mm The bracket should be painted with one coat of primer and two coats of approved paint. CSR 34.38 XII (625 + 20 % = 750+5.35% = Rs 790.12 )