Power Cable Tenders

Description: Cable Power 2 Core 25 Sq. Mm Aluminum Conductor Pvc Insulated Armored Unscreened, Under Ground Cable To Spec. No. Irs:s-63/2014 (rev 4.0) Or Latest

Description: Supply Of Power And Control Flexible Cable For Scr And Rec Installed At Coal Handling Plant, Ssctpp, Suratgarh For Fy 2024-25.

Description: CATEGORY: Y1-MISC-4976-000-610, Headset , Y3/6145-007500, Cable Power Electrical Copper Conductor , Y3/6145-000027, Cable Electric J Twin Flat Low. 0225

Description: Urgent Repair/replacement Of Power Supply Feeder Lt Cable From Sub-station No. 3b To Indoor Stadium Lt Panel At Nehu Campus, Shillong.

Description: CATEGORY: Supply of IP Based PTZ Cameras 2MP 45X Zoom with IR , Supply of IP Based Fixed Bullets Cameras with all accessories , Supply of IP Based ANPR Cameras along with all accessories , Supply of Cat6 Network Cable , Supply of PVC HDPE Conduit all required accessories , Supply of 3Core armored Power Cable , Supply of armored OFC Cable , Supply of 8 Port Network POE Switch with 2 SFP ports , Supply Installation of 1KVA online UPSinverter with Liion batteries , Supply of Outdoor Enclosures IP65 BIG , Supply of 8 channel Network Video Recorder with 30 days backup , Supply of 100Mbps 5GHZ wireless radio devices , Supply Designing and fixing of Customised CCTV Galvanised pole , Supply installation of OFC Junction Point with all required accessories , Supply of Surge Protectors , Supply Installation of Copper Earth pits as per IS 456 standards , Cable trench with digging of soil upto 3ft and soil refilling , Laying of cable with wall clampingwith HDPE duct duly securing in HDPE DuctPVC Pipe , cable laying Installation and Commissioning charges10 of material and laying cost , Deployment of 03 no of Sr. technicans for maintenance of above CCTV network for a period

Description: 35 Ton Synchronized Lifting Jacks Spare Parts Are Required As Are Under:- 1) Power plug For Air Brake D.o.l. Starter Of 35 Ton Jmp/jack. Qty-10 Nos. 2) Power socket For Air Brake D.o.l. Starter Of 35 Ton Jmp/jack. Qty-10 Nos. 3) Control plug For Air Brake D.o.l. Starter Of 35 Ton Jmp/jack. Qty-10 Nos. 4) Control socket For Air Brake D.o.l. Starter Of 35 Ton Jmp/jack. Qty-10 Nos. 5) contractors With Contractor Coil 40amp Each 4 Pole ,415v,50hz For Air brake D.o.l. Starter Of 35 Ton Jmp/jack. Qty-10 Nos.. 6) Push Buttom One normally Closed Auxiliary Contacts And One Stop Push Buttom (no-nc) qty-10 Nos. 7) Power Cable 5 Core Cable 2.5 Sq Mm For 10 Hp 3 Phase Motor qty-80 Mtr. 8) Control Cable 4 Core Cable 6.0 5q Mm For 10 Hp 3 Phase Motor qty-80 Mtr. 9) Brake Coil Complete Set For 7.5 Hp Brake Motor. Qty-6 Nos. Make:- bch.

Description: Urgent Repair-replacement Of Power Supply Feeder Lt Cable From Sub-station No. 2 To Feeder Pillar Behind Qtr. No. L-25 At Nehu Campus, Shillong.

Description: CATEGORY: Y1-MISC-4805-002-201 Laptop Power Charging Cable , Z5- MISC-FOSD-600-2000 Flexible Surveillance Device , W2- 5365-003879 Plug Screwed , X5-6240-000668 Lamp Filament Electic 230 V 15 W , W2-WA-CX-J-44 Plug Oil No. 5HD , W2-WA-CX-F-16 Plunger PAWL N.5.HD

Description: CATEGORY: MOUNTING ENG FRT , UNIVERSAL JOINT CROSS , FLASHER UNIT , COMBINATION SWITCH , BONNET CATCH CABLE , PUMP POWER STEERING , CLUTCH SLEEVE WITH BRG , ARMATURE ASSY , PRESSURE PLATE , ROD ASSY STEERING

Description: BOQ ITEMS: Providing, installation, testing & commissioning of LED Totem pole sign board suitable for working on 220 V, 50 Hz single phase A/C supply. The display shall be made up of A.C.P. sheet (Aluminium Composite Panel) 3 mm thick of required colour and support frame of MS welded structure made out 40mm x 40mm x l.5 (NS) square pipe section with welded vertically and honzontally in regular interval with double pipe frame shall be covered from back and sides with 3mm thick ACP sheet the front facia shall be covered by ACP alongwith the letters and all the side i/c wiring the entire board with suitable size of power cable for power LED, the A.C.P. sheet shall have router cutting letters for the given matter in Hindi & English both languages and 2 & 5 mm thick acrylic sheet (NS) with the help of laser cutting of logo and letters shall be fitted inside the board for making the letters visible from outside etc. Providing inside the letter power LED modules each consisting of 3 Nos. LED of 1.14 watt, 90 lumen per watt, 12 volt, shall be fixed in such a way to give uniform bright light to the characters and 120 modules per SMPS of 400 watt capacity with inbuilt protection to make the light disturbance free. (aprox height of board 12 feet) including complete connection testing etc as required. , Fabrication, providing, welding & fixing of MS frame work made out of angle iron/ MS tube/ MS channel complete with welding and one coat of red oxide and two or more coats of approved synethic enamel paint etc. as required., Supplying and installation following size of PVC boxes IP 65, made out of poly cabrbonate outdoor installtion, weather proof, shock proof having provision for cable entry with 32 amps SP MCB, operation of manual automatic timer of 3 kw for led board and suitable connector for receiving cable with suitable mounting arrangements etc. complete as required. (a). 350 x 270 x 190 including complete connection testing etc as required., Supplying and lying of one number PVC insulated and PVC sheathed/ XLPE power aluminum armoured cable of 1.1 KV grade of following size on wall surface as required (a). 3 x 10 sq mm, Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC shealhed/ XLPE aluminum armoured cable of 1.1 KV grade as required. (a). 3 x 10 sq. mm (22mm) DSR_2022 (9.1.7)