Water Resources Department Tender

Cement Concrete (1:3:6 ) using 40 mm size hard black granite crusher broken metals with cost conveyance, royalty, taxes of all materials and labour etc. complete as per direction of Engineer-in-charge

Fly Ash Brick Masonry in C.M. (1:6) foundation and plinth using bricks of 23cm x 11cm x 8 cm size having crushing strength not less than 75kg/Cm2 with dimensional tolerance + 8% with cost conveyance ,royality, taxes of all materials etc. complete etc.complete and as per the direction of the Engineer-in-charge.

Providing cement concrete of grade M-20 using 20 mm down graded size hard granite crusher broken chips and sharp sand of approved quality from approved quarry, mixing, hoisting, lowering, laying, compacting and curing for specified days with cost, carriage, royality and taxes of all materials and cost of all labour, T&P, workers welfare cess etc complete and as per direction of the Engineer-in-charge.

Supplying, fitting & placing uncoated HYSD bar reinforcement (inclusive of over lap & wastage) for R.C.C. work including cutting, bending, binding and tying the grills and placing in correct position including cost, conveyance, taxes of HYSD bars & binding wire of 18 to 20 gauge with cost of all labour, T&P, workers welfare cess etc complete as per approved specification and direction of the Engineer -in- Charge.

Rigid smooth centering & shuttering for plain C.C / R.C.C. works including removing the same after specified days of casting with cost of all labour, T&P, nail, workers welfare cess etc. complete as per approved specification and direction of the Engineer-in- Charge.(a) RCC Column base

Rigid smooth centering & shuttering for plain C.C / R.C.C. works including removing the same after specified days of casting with cost of all labour, T&P, nail, workers welfare cess etc. complete as per approved specification and direction of the Engineer-in- Charge.(b)RCC Column

Rigid smooth centering & shuttering for plain C.C / R.C.C. works including removing the same after specified days of casting with cost of all labour, T&P, nail, workers welfare cess etc. complete as per approved specification and direction of the Engineer-in- Charge.(c)Plinth Beam

Rigid smooth centering & shuttering for plain C.C / R.C.C. works including removing the same after specified days of casting with cost of all labour, T&P, nail, workers welfare cess etc. complete as per approved specification and direction of the Engineer-in- Charge.(d)RCC Lintel

Rigid smooth centering & shuttering for plain C.C / R.C.C. works including removing the same after specified days of casting with cost of all labour, T&P, nail, workers welfare cess etc. complete as per approved specification and direction of the Engineer-in- Charge.(e) Roof Beam

Rigid smooth centering & shuttering for plain C.C / R.C.C. works including removing the same after specified days of casting with cost of all labour, T&P, nail, workers welfare cess etc. complete as per approved specification and direction of the Engineer-in- Charge.(f)RCC Chaja

Rigid smooth centering & shuttering for plain C.C / R.C.C. works including removing the same after specified days of casting with cost of all labour, T&P, nail, workers welfare cess etc. complete as per approved specification and direction of the Engineer-in- Charge.(g)RCC Selves

Rigid smooth centering & shuttering for plain C.C / R.C.C. works including removing the same after specified days of casting with cost of all labour, T&P, nail, workers welfare cess etc. complete as per approved specification and direction of the Engineer-in- Charge.(h)RCC Roof Slab

Fly ash Brick masonary in C.M. (1:6) in super structure using bricks of 23cm x 11cm x 8 cm size having crushing strength not less than 75kg/Cm2 with dimensional tolerance + 2% with cost conveyance ,royality, taxes of all materials etc. complete as per direction of the Engineer in charge

Providing and laying 2.5 cm thick grading concerte(1:2:2) on roof slab with 4.7 mm size H.G. crusher broken chips and sharp sand of approved quality from approved quarry, mixing, hoisting, lowering, laying, compacting and curing for specified days with cost, conveyance, royalty and taxes of all materials and cost of all labour, T&P, workers welfare cess etc. complete as per approved specification and direction of the Engineer -in- Charge

Supplying and fixing W.I.Clamps 25 cm to 30 cm long of 35mm x 5mm size for doors, windows, and ventilators including fixing in cement concrete ( 1:3:6) with 12mm to 20mm hard stone chips or cement mortar (1:3) including cost of all materials as per approved specification and direction of the Engineer in charge.

6 mm thick cement Plaster (1:4 ) to RCC surfaces finished smooth including closed deep chipping & slurry treatment and curing for specified days with cost, conveyance, royalty and taxes of all materials and cost of all labour, T&P, workers welfare cess etc. complete as per approved specification and direction of the Engineer -in- Charge.

16 mm thick cement plaster in Cement Mortar (1:6) over brick work after racking the joints and cleaning the surface including watering and curing for specified days with cost, conveyance, royalty, taxes of all materials and cost of all labour, T&P, workers welfare cess etc. complete as per specification and direction of the Engineer -in- Charge.

12 mm thick cement plaster in Cement Mortar (1:6) over brick work after racking the joints and cleaning the surface including watering and curing for specified days with cost, conveyance, royalty, taxes of all materials and cost of all labour, T&P, workers welfare cess etc. complete as per approved specification and direction of the Engineer -in- Charge.

12 mm thick cement plaster in Cement Mortar (1:4) with cement punning over brick work after racking the joints and cleaning the surface including watering and curing for specified days with cost, conveyance, royalty, taxes of all materials and cost of all labour, T&P, workers welfare cess etc. complete as per approved specification and direction of the Engineer -in- Charge.

Dressed seasoned salwood work framed and fixed ( wrought and put up ) in choukath of doors and windows and ventilators with cost, conveyance, taxes of all materials and cost of all labour, T&P, workers welfare cess etc. complete as per approved specification and direction of the Engineer -in- Charge.

32 mm. Thick Non sal wood panelled shutters moulded panels with all labour iron fittings and wooden hinges, cleats etc complete with cost, conveyance, taxes of all materials and cost of all labour, T&P, workers welfare cess etc. complete as per approved specification and direction of the Engineer -in- Charge.

Supplying, fitting and fixing of FRP Door shutters with all labour iron fittings and wooden hinges, cleats etc complete with cost, conveyance, taxes of all materials and cost of all labour, T&P, workers welfare cess etc. complete as per approved specification and direction of the Engineer -in- Charge.

Providing and fixing of Partly fixed, partly top hung and partly louvered windows of approved make to be fabricated from roll formed sections made of pre-painted steel (base steel as per IS513 of 0.6 mm thick “D” quality, galvanized as per IS-277 with zinc of 120 Gm/Sq.mtr) with paint specification being with primer of 5-7 microns and finished paint with polyster paint (Black /Pearl white/ Chocolate Brown) of 12-16 microns alongwith the alkyd backer at the back of 5-7 microns and the sizes of outer frame being of 46x52 mm and with all vertical and horizontal mullions are of 46x70 mm and fixed beadings are of 18x25 mm. Section for internal top and bottom frames in the louvered areas should be 18 x 40 mm.Top hung shutter should be of 46 x 46 mm. Accessories / gaskets are to be used as per the manufacturer’s supply and specification like handle being made of high grade aluminium powder coated and with nylon receiver and gasket will be made of EPDM. All corner brackets are to be made of CRCA with zinc phosphating. The mullion caps and louvered-clips should be of glass filled nylon. The sections are to be cut to length ,mitre joined with corner bracket and frames are fixed to the concrete/masonry walls by means of self expanding screws and glass to be used of 5 mm reflective with all taxes complete.

MS panelled Door single leaved shutter with MS frame .Overall size including frame -1830mmx\(H)x910mm (W) madeout of the following materials conforming to relevant Indian standard specification frame:-30x30x5mm MS angle shutter style :-Top & bottom rail 25x25x3mm MS angle door panel:-1.0mm CR sheet, panel stiffener covering width of each leaf :-19x5mm Ms flat 3nos each leaf Hingessize 100mm-3 Nos brought out as per ISS Hold fast 30x30x5mm Ms angle150mm length bifurcated at the tip 3 nos on each side Handle:-19x5mm Ms Flat fabricated 4nos Aldrop 2nos brought out as per ISS.Tower bolt 2 nos bought out as per ISS

Supplying, fitting & fixing in position M.S grills to Doors and Windows of approved design with cost of M.S flat, angle, square bars including hire & running charges of all machineries, T&P, labour for fabrication & errection with red oxide priming one coat and workers welfare cess etc. complete as per approved specification and direction of Engineer-in-Charge.

Fixing Vitrified Tiles in floors, trades of steps and landing on 25 mm thick bed of Cement Mortar ( 1:1 ) joined with neat cement slurry as per direction of the Engineer - in- Charge.

Fixing Vitrified Tiles in dado skirting of Cement Mortar ( 1:1 ) joined with neat cement slurry as per direction of the Engineer - in- Charge.

Fixing glazed Tiles in on 12mm thick cement plasrer 1:3 jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing comlete and curing for specified days with cost, conveyance, royalty and taxes of all materials and cost of all labour, T&P, workers welfare cess etc. complete as per approved specification and direction of the Engineer -in- Charge

Finishing wall surface of walls with Cement based wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete as per direction of the Engineer - in- Charge.

Painting wall surface with Primer of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete as per direction of the Engineer - in- Charge.

Distempering two coats walls with distemper of approved shade on new work to give an even shape including cost of Distemper with cost of all materials taxes, labour T&P etc complete as per direction of the Engineer - in- Charge.

Finishing wall with water proofing weather coat paint of approved shade on new works two coats to give an even shade including cost of paint and cost of all labour, T&P, workers welfare cess etc. complete as per approved specification and direction of the Engineer -in- Charge.

Painting two coats with any approved paint including cost of paint with cost of all materials taxes, labour T&P etc complete as per direction of the Engineer - in- Charge.

Providing and laying cement concrete (1:2:4) using 12 mm size hard granite crusher broken chips and sharp sand of approved quality from approved quarry, mixing, hoisting, lowering, laying, compacting and curing for specified days with cost, conveyance, royalty and taxes of all materials and cost of all labour, T&P, workers welfare cess etc. complete as per approved specification and direction of the Engineer -in- Charge

Earthwork in all kind soil including rough dressing and breaking clods to maximum 5 cm to 7 cm and disposing the excess earth away from worksite with cost of all labour, T&P and workers welfare cess etc. complete and as per the direction of the Engineer-in-charge.