Rural Development Department Tender

Providing Cement Concrete (1:3:6) with 40mm size clean hand broken granite metal of approved quality from approved quarry includinghoisting lowering & levelling in position to required level in each layer not exceeding 15cm thick in foundation including frame work where neCessary ramming using vibrator to proper slope and levelling curing dewatering with cost conveyance Royalty, DMF, EMF & Additional Charges , labour of all materials and including hire & running charges of machineries T&P required for the work including supplying & working of pumps and Cess as per the specifiction and direction of Engineer-in- charge(Open Foundation)

Providing & filling manualy with aproved quality of sand in layers not exceeding 150mm thick including watering ramming to proper density with cost,conveyance, Royalty, DMF, EMF & Additional Charges , of all materials and cost of alllabour & T&P as required for the item of work including Cess etc complete as per specification & direction ofEngineer-in-charge.

Providing and laying tack coat over the prepared surface of penetration grade of bitumen VG-30 after scrapping clearing the road surface with cost conveyance Royalty, DMF, EMF & Additional Charges T&P of bitumen & other all materials including hiire and running charges of Tar boiler and labour charges as required for the item of work etc complete including Cess as per specification & direction of Engineer-in-charge.(Over Granular sub base)

Providing and laying tack coat over the prepared surface of penetration grade of bitumen VG-30 after scrapping clearing the road surface with cost conveyance Royalty, DMF, EMF & Additional Charges T&P of bitumen & other all materials including hiire and running charges of Tar boiler and labour charges as required for the item of work etc complete including Cess as per specification & direction of Engineer-in-charge.(Over BT Surface)

Providing and laying semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder of 60/70 penetration grade of bitumen,transporting the hot mix to work site,layingwith a hydrostatic paver finisher with sensor control to the required grade,level and alignment and rolling with smooth wheeled,vibratory and tandem rollers to achieve the desired compaction as per Clause 508 of MoSRT&H Specification for road & Bridge works (4th Revision) with cost,conveyance,Royalty, DMF, EMF & Additional Charges ,including cost of all labour,T&P and Cess required for the work complete in all respects as per direction of the Engineer-In-Charge.

Sub structure

Providing weep holes in abutments and wing walls using 10 CM dia AC pipes including metal spall backing in rear side etccomplete including centering and shuttering if required, with cost, conveyance of all materials, labour with T&P, Cess, required for the work and as per direction of EIC.

Construction of embankment with approved material obtained from borrow ptis with all lead and lifts transporting to site by machanical means within a lead of 5Kms spreading,grading to required slope and compacting to meet requirements of table 300-2 & clause 305 of MOSRT & H specification including Royalty, DMF, EMF & Additional Charges charges and cost of all materials labour charges,machineries, T&P Cess etc required for the work complete as per direction of E.I.C

Providing & laying 75mm compacted thickness of WBM specification with following size of IRC graded metal of approved quality from approved quarry and spreading on the road surface uniformly metal to specified thickness and hand packing the voids with small stones to proper camber and grade conveying moorum from stacks stacked at work site or at approved stacking yard including labour charges of moorum spreading over the metal surface filling the interstices of metal and consolidation with three wheeled steel Roller 8 to 10 tonnes in stage of proper grade & camber & turfedging including hire and running charges of Roller and all other machineries including all labour, T&P and cost, conveyance Royalty, DMF, EMF & Additional Charges & of all materials required for the work with Cess etc complete in all respect as per specification and direction of the Engineer-in-charge.

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth upto 300mm, removal of stumps of treescut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 mtrs including removal& disposal of top organic oil not exceeding 150 mm in thickness including all labour, T&P, Cess, articles required for the work etc complete and direction of the Engineer-In-C