Rural Development Department Tender

Providing of 80 mm thick factory made cement concrete interlocking paver block of M-40 grade and approved make,varity colour and size made by block making machine with strong vibratory compection of approved design and shape ,laid in required colour and pattern over 25mm thick compected bed of coarse sand ,filling the joints with fine sand etc,all etc complete as per direction of Engineer- in-charge

Providing cement concrete 1:2:4 with 12 mm nominal size of hand or crusher broken hand granite stone aggregate of approved quality from approved quarry in foundation up to a depth of 1.5m.below ground level and up to a height of 1.5m above Ground level or Bed level including hoisting, lowering and laying in position in layers not exceeding 150 mm thick with proper packing and ramming to proper slope and level including curing dewatering, shoring, shuttering if necessary at the time of laying concrete with cost,conveyance, royalty,taxes of all materials required for the work, including supplying and working of pumps and all other materials required for the work, including all labour finishing the exposed surface, smooth, providfing grooves and beads where ever necessary etc. complete as per spoecification for Road and Bridge works and direction of Engineer-in-charge.

Providing, Fitting and Fixing M.S. GI Pipes Including cost and conveyance of all materials to site, and all labour charges etc. complete as per specification and direction of the Engineer-In-charge.

Labour for fixing big six or trafford A.C sheet or GCI sheet in roof including fixing of ridges wind ties etc. complete but excluding cost of fitting including drilling holes in wind ties as per spoecification for Road and Bridge works and direction of Engineer-in-charge.

Supplying ,Fitting and Fixing up window sliding type made up aluminum section 9778 as windows frame section No 4095 , 4096 and 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber bending including lucking arrangement including all fitting including cost of materials all taxes , labour , excluding cost of glass etc complete as per the direction of Engineer-in charge.

Providing fitting, fixing of AL door with anodized Al door section of 9202 as vertical member, 9201 as top member and 9200 as bottam and middle member with frame section no 9221 with tappered clip No 4660 and the frame to be completed by means of jointing angle No 1855 including all cost of labour ,hire charges of drilling machine,labour charges etc complete as per the direction of the Engineer-in charge.

Providing, Fitting and Fixing M.S. Iron angle and shutters for doors and windows Including cost and conveyance of all materials to site, and all labour charges etc. complete as per specification and direction of the Engineer-In-charge.

Painting two coats over wood and iron work with approved Enamel paint over a coat of primming, including cost and conveyance of all materials to site, and all labour charges etc. complete as per specification and direction of the Engineer-In-charge.

Scraping old paint with scrapers, sand papering and washinf with soap water or soda including scaffolding charges up to 5m height etc. complete as per direction of the Engineer-in-Charge

Distempering 2-coat to walls with distemper of approved shade on old or new work to give on even shade including cost and conveyance of all materials to site, and all labour charges complete as per direction of the Engineer-in-charge.