Rural Development Department Tender
... More
The RDD has issued a formal invitation for competitive bids for the Rural Development Department project, for L062-kelapada Balikdadi Road To Pitamaha in Ganjam, Odisha, with an estimated contract value of Rs. 79,20,000. The bid opening date for this tender is 07-11-2026 and the last date for bid submission is 21-11-2026. Interested bidders for Rural Development Department tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Rural Development Department - RDD Tender - Orissa Tender
Opening Date7 Nov 2026
Closing Soon21 Nov 2026
Tender Amount₹ 79,20,000
Costs
EMD
₹ 1,59,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
L062-kelapada Balikdadi Road To Pitamaha
Contact
Tender Id
2026_CERWI_149990_7Tender No
Online Tender/24-2026-27/PMGSY/BPRTender Authority
Rural Development Department ViewPurchaser Address
-Website
http://rdodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5 and as per the direction of the Engineer in charge.
113.12
50
5708.04
... More
Construction of granular sub-base Gr-III by providing stone screening materials varies from 9.5mm to 2.36mm as per table 400.1 spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with vibratory roller to achieve the desired density complete as per technical specification Clause 401 of MoRD by mix in place method and as per direction of Engineer-in-Charge.
527.74
2315
1221950.31
... More
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, sand & moorum admixture to fill-up the interstices of coarse aggregate, watering and compacting to the required density as per Technical Specification Clause 405 of MoRD by Mechanical means and as per direction of Engineer-In-Charge.
-
-
-
... More
Grading No.-II
209.42
3095
648234.48
... More
Grading No.-III
209.42
3213
672966.98
... More
Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502 of MoRD for low porosity surface. and as per direction of Engineer-In-Charge.
2792.25
57
159465.4
... More
Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503 of MoRD. and as per direction of Engineer-In-Charge.
2792.25
19
55370.32
... More
Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates using Bitumen Emulsion MS (Cold Mix) to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of Type C as per Technical Specification Clause 508 of MoRD by manual means and as per direction of Engineer-In-Charge.
2792.25
241
674830.98
... More
Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade using Bitumen Emulsion SS (Cold Mix) and cross fall using Type C as per Technical Specification Clause 510 of MORD with S-60/70 grade bitumen laid by manual means and as per direction of Engineer-In-Charge.
2792.25
95
266631.95
... More
Fine dressing &Turfing including transportation of turfs by mechanical means with all leads & lifts and placing of turfs in position and ramming with thapies including watering and cost of labour & all materials etc. complete as per direction of Engineer - in - charge.
2920
31
92739.2
... More
CONCRETE PAVEMENT
Construction of granular sub-base Gr-III by providing stone screening materials varies from 9.5mm to 2.36mm as per table 400.1 spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with vibratory roller to achieve the desired density complete as per technical specification Clause 401 of MoRD by mix in place method and as per direction of Engineer-in-Charge.
89.1
2315
206305.7
... More
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, sand & moorum admixture to fill-up the interstices of coarse aggregate, watering and compacting to the required density as per Technical Specification Clause 405 of MoRD by Mechanical means and as per direction of Engineer-In-Charge.
-
-
-
... More
Grading No.-II
61.88
3095
191542.11
... More
Construction of un-reinforced, plain cement pannelled (0.5m x 0.5m) concrete pavement of 100 mm thickness as per design over a prepared sub base with 43 grade cement or any other type as per clause 1501.2.2 M-30 (Grade) coarse and fine agreegate conforming to IS: 383 maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel form work laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing) spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrator and finished in continuous operation including provision of contraction and expansion construction joints applying primer sealant near approaches to bridge / culvert and construction joints admixtures as approved, curing of concrete slab for 14-days finishing to line and grade as per drawing and technical specification clause 1501. Panels are to be made by cutting grooves of 3 to 5 mm thick and 25 to 30 mm deep in C.C.Slab. The grooves are to be filled with sealant etc as per direction of Engineer-in-Charge.
82.77
6998
579276.61
... More
CROSS DRAINAGE WORKS
Earthwork in excavation for foundation of structures upto 3 m depth as per drawing and technical specification Clause 1104 of MoRD including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material and as pr the direction of the Engineer in charge
56.24
457
25756.8
... More
Fillling sand in foundation trenches as per drawing and technical specification Clause 305.3.9 & as per direction of Engineer in charge
11.16
1239
13834.27
... More
Providing & laying Plain Cement Concrete M-15 equivalent to Nominal Mix (1:2.5:5)in open foundation as per drawings & Technical Specification clauses 802,803,1202 & 1203 of MORD and as per direction of Engineer-In-Charge.
6.72
5734
38538.93
... More
Providing & laying Plain Cement Concrete M-15 equivalent to Nominal Mix (1:2.5:5) in substructure as per drawings & Technical Specification clauses 802,804, 805,806, 807,1202 & 1204 of MORD and as per direction of Engineer-In-Charge.
47.44
6058
287429
... More
Providing and laying reinforced cement concrete pipe NP3 for culverts on cement concrete bedding including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106. and as per the direction of the Engineer in charge
-
-
-
... More
1000 mm dia HPC (Single row)
7.5
7848
58865.4
... More
1000 mm dia HPC (Double row)
7.5
15768
118265.93
... More
PROTECTION WORK
Earthwork in excavation for foundation of structures upto 3 m depth as per drawing and technical specification Clause 1104 of MORD includding setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material as per direction of Engineer-In-Charge.
138.75
457
63544.73
... More
Fillling sand in foundation trenches as per drawing and technical specification Clause 305.3.9 & as per direction of Engineer in charge.
21.75
1239
26961.95
... More
Providing & laying Plain Cement Concrete M-15 equivalent to Nominal Mix (1:2.5:5)in open foundation as per drawings & Technical Specification clauses 802,803,1202 & 1203 of MORD and as per direction of Engineer-In-Charge.
21.75
5734
124735.38
... More
Providing & laying Plain Cement Concrete M-15 equivalent to Nominal Mix (1:2.5:5) in substructure as per drawings & Technical Specification clauses 802,804, 805,806, 807,1202 & 1204 of MORD and as per direction of Engineer-In-Charge.
61.5
6058
372615.59
... More
Providing & laying Plain Cement Concrete M-20 Nominal Mix (1:2.4) in Open foundation as per drawings & Technical Specification clauses 802,803,1202 & 1203 of MORD and as per direction of Engineer-In-Charge.
3
6483
19450.5
... More
Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7 and as per the direction of the Engineer in charge
49
180
8844.01
... More
ROAD APPURTENANCES
Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 and as per the direction of the Engineer in charge
2
14816
29632.74
... More
Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing as per Clause 1701.2.2 of MoRD and as per direction of Engineer-In-charge
-
-
-
... More
600 mm equilaterial
4
2229
8918.68
... More
600 mm Circular
10
2282
22828.5
... More
Providing and fixing of typical Citizen Informatory sign board with Logo as per MoRD specification and drawing. Two nos MS Plate of 1.6 mm thick, top and bottom plate duly welded with MS flat iron 25mm x 5m size on back on edges. The flat iron frame of both plates with be welded to 2 Nos. 75mm x 75mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 600mm x 600mm x 750mm, 750mm below ground level. Lettering and printing arrows, border etc will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.00 of MoRD and as per direction of Engineer-In-Charge.
3
20831
62495.04
... More
Providing and erecting direction and place identification of semi reflective sign boards as per IRC-67 made of 2 mm thick M.S. Sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70 mm width and required message, letters, figures with reflective tape of engineering grade as per MORD specifications of required shade and colour. Supported and welded on two nos. 47 mm x 47 mm of 12 SWG square tube of 3050 mm height duly strengthened by 25 mm x 5 mm MS flat iron on edges on back firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and Technical Specification Clause 1701 of MoRD. and as per the direction of the Engineer in charge
2
2556
5112.6
... More
Providing and fixing of Maintenance Board with Logo as per MoRD specification and drawing. Two nos MS Plate of 1.6 mm thick, top and bottom plate duly welded with MS flat iron 25mm x 5m size on back on edges. The flat iron frame of both plates with be welded to 2 Nos. 75mm x 75mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 600mm x 600mm x 750mm, 750mm below ground level. Lettering and printing arrows, border etc will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.00 of MoRD and as per direction of Engineer-In-Charge.
1
10000
10000
... More
Supplying and installing of measurement stones including painting, lettering in accordance with the specifications and as approved by the engineer and as per direction of Engineer-In-Charge and as per clause 1703 of MoRD.
-
-
-
... More
i) Ordinary kilometer stone
1
2627
2627.78
... More
ii) 200 mtr Stone
4
762
3049.08
... More
Construction of guide posts of 250mm dia M 15 grade cast in situ with 20mm nominal size aggregate, true to line and grade, tolerance of vertical RCC posts not to exceed 1 in 500 as per drawing and Technical Specification Clause 1608.2 as per direction of Engineer in charge.
24
994
23857.92
... More
Maintenance Routine Maintenance after completion of construction works 1st Year
0.95
91578
87000
... More
2nd Year
0.95
110526
105000
... More
3rd Year
0.95
128421
122000
... More
4th Year
0.95
146315
139000
... More
5th Year
0.95
165263
157000

