Public Health Engineering Organisation Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 8,99,640Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PHEO_108113_1Tender No
SEPHBGR 27/2024-25Tender Authority
Public Health Engineering Organisation ViewPurchaser Address
-Website
http://https://pheoodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Laying of ISI Marked Centrifugally Cast (Spun) K - 9 Class Ductile Iron Socket & Spigot Pressure Pipes in standard length with internal cement mortar lining and external bituminous coating conforming to IS 8329:2000 and its subsequent amendments & ISI Marked SB/EPDM Rubber Gasket (IS:5382) for Push-on type Flexible Joints of DI Pipes,including inspection, transportation, handling, loading, unloading, stacking, etc. all complete as per specification and direction of Engineer-in-charge.
350mm dia DI K9
108
203
21934.8
... More
400mm dia DI (K9)
118
243
28674
... More
Supplying all materials, labour and T&P for providing, laying, fixing & testing of D.I/C.I Specials, Bends, etc. in trenches confirming to IS: 1538 all complete as per specification and direction of Engineer-in-charge including supplying of all labour, material, T&P required to perform to work. (excluding earth work)
10.3
16625
171237.5
... More
Supplying all materials, labour and T&P for providing, laying, fixing & testing of Restrained joint of DI Pipes etc all complete as per specification and direction of Engineer-in-charge.
(350mm dia DI K9)
22
7791
171423.34
... More
400mm dia DI (K9)
22
9258
203691.18
... More
Supplying all materials, labour and T&P for providing, laying, fixing & testing of Restrained Joints Bends etc all complete as per specification and direction of Engineer-in-charge.
(350mm dia DI (K9)-45 degree)
1
19228
19228.83
... More
350mm dia DI (K9)-90 degree
1
26622
26622.76
... More
400mm dia DI (K9)-45 degree
1
24483
24483.44
... More
400mm dia DI (K9)-90 degree
1
33355
33355.95
... More
Providing push-on-joints conforming to IS:3114-1994 to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes using Rubber Gaskets Conforming to I.S 5382 of S.B.R quality including testing of joints as per specification complete (350mm dia DI K9)
25
449
11225
... More
400mm diameter
27
449
12123
... More
Providing & fixing of Kirloskar/VAGUE/Talis make DI double flanged Non Rising spindle type Sluice Valve confirming to IS 14846 including all materials, labours, insertions & nut-bolt complete.(100mm Dia Sluice With Hand Wheel & Without bypass arrangements.)
2
25952
51904.8
... More
350mm Dia DI Sluice valve With Hand Wheel & Without bypass arrangements.(PN1.6) (Make:KIRLOSKAR/VAGUE/TALIS)
2
188089
376178.8
... More
400mm Dia DI Sluice valve With Hand Wheel & Without bypass arrangements.(PN1.6) (Make:KIRLOSKAR/VAGUE/TALIS)
2
227003
454006.2
... More
Fixing DI Tamper Proof Kinetic Air Valve conforming to IS 14845 : 2000 for water works purposes for the following diameters including drilling the water main (Cast iron pipes with metal straps) as per specification complete.
(100mm dia DI Tamper Proof Kinetic Air Valve).(PN1.6) (Make:KIRLOSKAR/VAGUE/TALIS)
2
19796
39592.2
... More
Supplying all materials,labour and T&P and constructing brick masonry chamber as per P.H. specification and design all complete including RCC Cover Slab (per each) (Sluice Valve chamber internal size:-[1.0x1.00x1.5mtr]
4
22196
88784.4
... More
Supplying all labour and T&P for providing and laying MS pipe and specials confirming to IS 3589/99 of quality grade FE 410/ GI Pipe (Medium ) confirming to specification of following nominal dia and including transportation of pipes and fitting to site etc all complete as per the direction of Engineer-in-Charge.
(350mm dia M.S.Pipe 8mm thick)
20
5734
114680
... More
350mm dia M.S. Flange.(16mm thick)
10
3468
34682
... More
350mm dia x 90' M.S. Bend
5
20908
104540
... More
400mm dia M.S.Pipe (8.80mm thick)
40
7180
287200
... More
400mm dia M.S. Flange.(12mm thick)
10
4495
44958.9
... More
400mm dia x 90' M.S. Bend
5
24416
122080
... More
Supplying all labour and T&P for flame cutting of following dia MS pipe of following thick in treanches by gas cutter set of pocket etc all complete
11.96
1137
13606.89
... More
Supplying all labour and T&P for Welding with two welding beads/pass, conforming to IS:816-1998 (Fillet weld) to MS pipes and fittings at site.
23.91
2569
61424.79
... More
Supplying all materials,labour and T&P and making flanged joints for C.I. pipes and specials of the following diameter including testing of joints as per specification all complete.
(350mm dia)
5
1296
6481.5
... More
400mm dia Flanged Joint
5
1771
8856
... More
Supplying all materuials, labour, T&P and filling in pipe line trenches with sand well watered and rammered including conveyance of all materials to work site, payment of royalty, contractor profit & labour cess etc all complete as per specifiation and direction of Engineer-in-charge.
9.54
599
5716.37
... More
Cement concrete (1:3:6) with 4cm. Size crusher broken hard Granite metal including cost of all labour, materials with all taxes, lead,T & P etc all complete.
6.36
6038
38407.4
... More
Cement concrete (1:2:4) with 20mm size crusher broken hard granite broken chips including cost of all labour, materials with all taxes, lead,T & P etc all complete and as per the direction of Engineer-in-charge
6.36
7602
48354.44
... More
Filling in foundation and plinth with excavated materials including watering and ramming as directed by the Engineer-in-charge.
242.77
162
39522.96
... More
Supplying all materials, labour, and T&P for removal/carriage of excavated earth from site to a distance 5 km away etc all complete and as per the specifications and directions of engineer-in-charge.
45.66
278
12730.01
... More
Providing, laying and jointing MS jacking pipe (with steel pushing collar) with suitable leak proof joints with compliance for maintaining slope as per design by trenchless method adopting Micro tunnelling method or any suitable mechanical technology below ground at all depth under running traffic condition including carrying out survey work at the job site for determining underground cable trenches like power cable, water & sanitary & resistivity tests for finding the soil strata with necessary equipment’s for completion of work,mobilizing of machineries & specialized crew at job site.complete including excavation of drive pit and exit pit (upto 3 metre depth) with proper protection at the three sides, providing & casting of MS cutting edges for front shield & constructing thrust bed at designed level as directed by the Engineer,necessary de-watering & providing concrete foundations at the base of the Drive pit, crane for handling of pipes & any other machinery, tool & tacklesrequired,construction(400MM-15Mtr) [Pushing of M.S. pipesof following dia for road crossing and railway crossing by push through method in all type so fstrat a by using hydraulic jack and drilling machine of required diameter of below M.S. casing pipes, lowering, laying, jointingofmaterial, required welding machinery, tripod,shain-pulleyblock crain, blower, compressor, loading and unloading of machinery into the trench, etc. transportation and dewatering, etccomplete, as directed by engineer-in-charge but excluding the cost of M.S.pipes.
(600mm casing Pipe,)
14
27618
386652
... More
Supplying all materials, labour and T & P for providing MS pipe of all classes conforming to IS 3589 &IS 3601 of the following outer diameter with internal grit blasted to Sa 2.5 to ISO 8501-1 followed by 500-700 micron two componet 100% soild free liguid epoxy coating all complete as per AWWA 210 -07 and direction of engineer in charge including supply of all labour, material, tools & plant required to perform the work.
(600mm ,14.70mm thickness)
14
11008
154116.2
... More
Supplying all materials, labour and T & P for providing MS pipe of all classes conforming to IS 3589 &IS 3601 of the following outer diameter with internal grit blasted to Sa 2.5 to ISO 8501-1 followed by 500-700 micron two componet 100% soild free liguid epoxy coating all complete as per AWWA 210 -07 and direction of engineer in charge including supply of all labour,material,tools&plant required to perform the work.(400mm ,18mm thick for carrier pipe)
14
7093
99307.6
... More
supplying all material ,labour and T &P for providing and fixing high density polyethylene spacers between casing and carrier pipe to avoied 2.5 mtr c/c all complete as per specification (BS 105 GUIDELINES ON PIPELINE CROSSING UNDER NH/R&B pavement) & direction of engineer in charge and approved by railway department etc all complete .
14
5873
82222
... More
supplying all material ,labour and T &P for providing and fixing 50mm dia vent /drain pipe at both ends of casing pipe including cutting ,fixing jointing etc all complete as per specification (BS 105 GUIDELINES ON PIPELINE CROSSING UNDER NH/R&B pavemen) & direction of engineer in charge and approved by works department etc all complete .
6
618
3712.2
... More
CLEAR WATER RISING MAIN Cutting asphalt or bituminous road of flexible pavments and disposal of dismantalled materials up a lead of 1000 mtr stacking servicable and unservicable materials separately including cost of all labour, T & P etc. all complete as per the direction of engineer-in-charge.
28.46
980
27899.34
... More
Cutting concrete road of grannualar course of flexible pavments and disposal of dismantalled materials up a lead of 1000 mtr stacking servicable and unservicable materials separately including cost of all labour, T & P etc. all complete as per the direction of engineer-in-charge.
42.69
1726
73682.94
... More
Supplying all labour, T&P and earth work excavation in following kinds of soil within initial laed of 50m & initial lift of 1.50m including rough fressing breaking clods and laying in layers not exceeding 0.30m. In depth, levelling the bed, using pans, vessels for slushy soil and including sundries supervision charges &labour cess etc, as per direction of Engineer-in-charge
897.91
293
263123.55
... More
Laying of ISI Marked Centrifugally Cast (Spun) K - 9 Class Ductile Iron Socket & Spigot Pressure Pipes in standard length with internal cement mortar lining and external bituminous coating conforming to IS 8329:2000 and its subsequent amendments & ISI Marked SB/EPDM Rubber Gasket (IS:5382) for Push-on type Flexible Joints of DI Pipes,including inspection, transportation, handling, loading, unloading, stacking, etc. all complete as per specification and direction of Engineer-in-charge.
(200mm dia DI K7)
79
87
6928.3
... More
250mm dia DI (K9)
978
125
123032.4
... More
350mm dia DI (K9)
10
203
2031
... More
Supplying all materials, labour and T&P for providing, laying, fixing & testing of D.I/C.I Specials, Bends, etc. in trenches confirming to IS: 1538 all complete as per specification and direction of Engineer-in-charge including supplying of all labour, material, T&P required to perform to work. (excluding earth work) (200mm dia DI K7)
1.19
15655
18630.05
... More
250mm dia DI (K9)
21.42
15655
335340.81
... More
350mm dia DI (K9)
0.21
16625
3491.25
... More
Supplying all materials, labour and T&P for providing, laying, fixing & testing of Restrained joint of DI Pipes etc all complete as per specification and direction of Engineer-in-charge.
(200mm dia DI K9)
11
4039
44432.96
... More
250mm dia DI (K9)
22
5373
118213.48
... More
Supplying all materials, labour and T&P for providing, laying, fixing & testing of Restrained Joints Bends etc all complete as per specification and direction of Engineer-in-charge
.(200mm dia DI (K9)-45 degree)
1
7614
7614.89
... More
200mm dia DI (K9)-90 degree
1
8997
8997.12
... More
250mm dia DI (K9)-45 degree
1
10722
10722.83
... More
250mm dia DI (K9)-90 degree
1
13855
13855.91
... More
Providing push-on-joints conforming to IS:3114-1994 to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes using Rubber Gaskets Conforming to I.S 5382 of S.B.R quality including testing of joints as per specification complete. (200mm dia DI K7)
18
301
5419.8
... More
250mm dia DI (K9)
191
301
57510.1
... More
350mm diameter
2
449
898
... More
Providing & fixing of Kirloskar/VAGUE/Talis make DI double flanged Non Rising spindle type Sluice Valve confirming to IS 14846 including all materials, labours, insertions & nut-bolt complete.
(200mm Dia PN-1.6 Sluice Valve With Hand Wheel & Without bypass arrangements
1
65592
65592.9
... More
250mm Dia DI Sluice Valve PN-1.6 With Hand Wheel & Without bypass arrangements. (PN1.6) (Make: KIRLOSKAR/VAGUE/TALIS)
2
89913
179827
... More
350mm Dia DI Sluice Valve PN 1.6 With Hand Wheel & Without bypass arrangements.(PN1.6) (Make: KIRLOSKAR/VAGUE/TALIS)
1
188089
188089.4
... More
Fixing DI Tamper Proof Kinetic Air Valve conforming to IS 14845 : 2000 for water works purposes for the following diameters including drilling the water main (Cast iron pipes with metal straps) as per specification complete. (50mm dia DI Tamper Proof Kinetic Air Valve).(PN1.6) .(Make: KIRLOSKAR/VAGUE/TALIS)
1
14191
14191
... More
80mm dia DI Tamper Proof Kinetic Air Valve (PN1.6) (Make: KIRLOSKAR/VAGUE/TALIS)
1
15976
15976.6
... More
100mm dia DI Tamper Proof Kinetic Air Valve (PN1.6) (Make: KIRLOSKAR/VAGUE/TALIS)
1
19796
19796.1
... More
Supplying all materials,labour and T&P and constructing brick masonry chamber as per P.H. specification and design all complete including RCC Cover Slab (per each) (Sluice Valve chamber internal size:-[1.0x1.00x1.5mtr] . Sluice Valve.)
4
22196
88784.4
... More
Supplying all labour and T&P for providing and laying MS pipe and specials confirming to IS 3589/99 of quality grade FE 410/ GI Pipe (Medium ) confirming to specification of following nominal dia and including transportation of pipes and fitting to site etc all complete as per the direction of Engineer-in-Charge
(200mm dia M.S.Pipe 6.30mm thick)
40
2805
112224
... More
200mm dia M.S. Flange.(12mm thick)
20
1541
30827.4
... More
200mm dia x 45' M.S. Bend
10
5635
56358
... More
250mm dia M.S.Pipe (6.30mm thick)
8
3484
27875.2
... More
250mm dia M.S. Flange.(12mm thick)
4
2055
8220.88
... More
250mm dia x 45' M.S. Bend
2
6961
13923.6
... More
350mm dia M.S.Pipe (8mm thick)
4
5734
22936
... More
350mm dia M.S. Flange.(16mm thick)
2
3468
6936.4
... More
350mm dia x 90' M.S. Bend
1
20908
20908
... More
Supplying all labour and T&P for flame cutting of following dia MS pipe of following thick in treanches by gas cutter set of pocket etc all complete
9.71
1137
11047.07
... More
Supplying all labour and T&P for Welding with two welding beads/pass, conforming to IS:816-1998 (Fillet weld) to MS pipes and fittings at site.
19.42
2569
49889.98
... More
Supplying all materials,labour and T&P and making flanged joints for C.I. pipes and specials of the following diameter including testing of joints as per specification all complete.
(200mm dia)
10
635
6350
... More
250mm dia
2
928
1856.2
... More
350mm dia
1
1296
1296.3
... More
Filling in foundation and plinth with excavated materials including watering and ramming as directed by the Engineer-in-charge.
650
162
105820
... More
Supplying all materials, labour, T&P and filling in pipe line trenches with sand well watered and rammered including conveyance of all materials to work site, payment of royalty, contractor profit & labour cess etc all complete as per specifiation and direction of Engineer-in-charge.
96.2
599
57643.04
... More
Cement concrete (1:3:6) with 4cm. Size crusher broken hard Granite metal including cost of all labour, materials with all taxes, lead,T & P etc all complete .
35.6
6038
214984.84
... More
Cement concrete (1:2:4) with 20mm size crusher broken hard granite broken chips including cost of all labour, materials with all taxes, lead,T & P etc all complete and as per the direction of Engineer-in-charge
35.6
7602
270663.24
... More
Re-fixing of precast cement concrete interlocking paver blocks of all sizes over 50 mm thick course sand bedding (dulycompacted) including filling of joints with sand complete in all respect.
192.2
546
104941.2
... More
Providing Supplying, fitting and fixing of 80mm thick interlock concrete colour paver block on compacted river coarse sand free from all organic materials and filling the joints with sand. including cutting corbelling, splays where ever necessary to proper size with cost, conveyance, royalties and taxes of all materials and cost of all labour, etc. complete in all respect as directed by Engineer in charge.
21.5
608
13080.6
... More
Supplying all materials, labour, and T&P for removal/carriage of excavated earth from site to a distance 5 km away etc all complete and as per the specifications and directions of engineer-in-charge.
237.4
278
66187.12
... More
Construction of WTP Design, Drawing ,Construction , Commissioning &Testing of 7.50 MLD conventional WTP with Cascade aerator, Raw water channel, Chemical house, Chemical store, Dosing arrangements,Chlorinator, Flash Mixer, ,Clariflocculator,RGF, bye pass channel, RCC roof filter house & back wash arrangement with pump, CWR, Clear water sunken pump house, Lab, Administrative Block, internal road & lighting, internal drainage arrangement, internal electrification /Arboriculture etc, but excluding clear water pumps , External Electrification, Automation & instrumentation & sludge Treatment.
7.5
6256206
46921545
... More
Providing, installation, testing and commissioning of Electromagnetic Flow Meter etc. including all materials(excluding CI/DI fittings) andmaking connection with existing pipeline required forElectromagnetic Flow Meter including cutting the existing pipe line etc. complete in all respect as per technical specification and as per direction of Engineer.(350 MM) Make : Krone Marshall, Endress & Hauser, Adept,ABB, Siemens.
1
301805
301805
... More
Supply with fitting and fixing of of D.I. Mechanical dismentaling joint for use to main uninterrupted water supply in the pipeline in case eof rpair of Flow meter as per specification and direction of Enginer - in - charge.(350 MM)
1
28334
28334
... More
Supply of Pressure Gauge to be installed delivery main Range up to 10 kg/cm2, Type-Sensor, Power Supply-24 DC, Out put-4 to 20mA, Make-E & H/ABB/VEGA.with SS 316 grade sensor niddle valve with bypass tube
2
7500
15000
... More
Supply & Installation,testing & Commissioning of Pressure transmitter with PT S-10 0-10 BAR with snuber of 316 grade & isolation ball valve with tube at raw water rising main,ingress protection IP65 including cost of all materials, Transportation to site etc all complete as per specification and direction of Engineer-in-charge.Make- Forbes Marshall, Honeywell, Baumer,WIKA
2
20000
40000
... More
Supplying, Fitting,Commissioning,Fixing double chamber DI PN 16 control valve, hydraulically operated, single diaphragm actuated, globe pattern. The valve shall consist of three major components; the body with the seat installed; the cover with the bearing installed and the diaphragm assembly. The diaphragm assembly shall be the only moving part and shall form a sealed chamber in the upper portion of the valve, separating the operating pressure from line pressure. Packing glands, stuffing boxes and there shall be no piston operating the main valve or pilot controls. No fabrication or welding shall be used in the manufacturing process. The control will be achieved by operating a Stainless Steel Float connected from OGR / UGR to the main Valve, integral oriface plate assembly, differential control, reverse flow control, restriction orifice.The Connecting tubing on the Main Valve will be PU or SS with SS fitting from reputed make. The valve shall be working up to 3.0 kg/cm2 operating pressure, Body DI integrated with PLC pannel for operation (local/remort and web enabled with command and control) make:CLA/SINGER/HAWLE to control or open & close water supply, including the cost of valve cutting the pipeline & making good to the damages including cost of all labours, T&P etc. all complete as per the direction of Engineer-in-charge. (globe type) 200 mm dia
7
68200
477400
... More
(Automation Of Filter Bed) Supply, Installation, Testing,Programming, Wiring & Commissioning of PLC panel Made out of 2 MM C.R sheet,PLC Pannel with encloser size 800x600x2100mm Duely Powder coated, Wall mounted/floor standing, Front operated, complete with interconnection with copper wire and lugs.(Make-Rittal,BCH,Hoffman) Having Type 2-1P+N 15kA Surge protection device- 1Nos ,32A 15KA MCB - 1 nos, DC powered Transistor/Relay based 24DI and 16DO Ethernet PLC Module, 35 Micosecond Response time for DI/DO Switch on/off, 8ch Analog input module- 2 Nos having 1ms per channel conversion/sampling time. 4Ch Analog Output module - 8 Nos having 1ms per channel conversation/ stabilisation time. Ambient air tempature upto 55 'C.10'' W touch Panel display having 2 ethernet, Usb host&device 24VDC type- 1 Nos (Make- Siemense ,Schneider-,Allen Bradly). Rated DP Separate DC MCB for Indivisual Modules.. 24dc 1C/O type slim Relay with Led for Digital out put - 36 Nos (make-wago,phoenix contact). 5 Ch Unmanaged Industrial Grade Switch- 1 Nos. (Make- wago,schneider,siemense,Allen Bradley) .4G ethernet TCP/IP-Modbus Industrial Grade GSM Router - 1 Nos (make- Robustel,Teltonika). 1.5 mmFuse TB with 0.5A glass fuse with Fuse blown indicator type Terminal Block for Digital Input/analog output- 96. 1.5 mm Terminal block for Digital Output - 36Nos. (Make- wago,Phoenix Contact). 24VDC powered signal isolator for Analog Input - 16 Nos. (Wago,Phoenix), 24 Vdc 6Amp redundent Power supply Unit with input and output DC MCB - 2Nos,1 HMI ( Make- Wago,Phoenix Contact,Siemens,Schneider), Color Coded Terminal Blocks for AC/DC/earth Bus/TB - 50 Nos.(Make- Wago,Phoenix Contact,Connectwell), 2/4/6 Amp AC/DC MCB- 6nos All switchgear and controlgear make- Siemens,schneider,ABB,L&T. All completed as per electrical specification and as per direction of Engineer-in-Charge. (DI96, DO36, AI16, AO8)
1
345460
345460
... More
Design, manufacture, supply, installation, testing and commissioning of SCADA System(Make-Schiender/Siemen/fox) for WTP Plant, Sand Filter beds & pump house. Windows based PC with latest configuration & OS complete with necessory office & antivirus softwares. PC configuration shall not be less than Intel i5 10th Gen CPU, 16 GB Ram, 128 GB SDD, 500 GB HDD, DVD RW, Rs232 & Rs485 port, 2 RJ45 ports, Keyboard, Optical Mouse, 32 inch color TFT Monitor, Latest Windows Pro OS, Microsoft Office & Antivirus & Internet Sequrity software for 3 years license.
SCADA Software of reputed company with developer & runtime license with minimum 512 number of Tags with following features & functions. 1. Supervise real-time data in the form of graphical presentation.
Control WTP processes locally or through Remote locations. 3. Dynamic process Graphic, It should resemble the process mimic. SCADA should have good library of symbols so that develop the mimic as per required. When operator sees the screen he should know what’s going in plant. 4. Alarm summery & Alarm history, SCADA system must be able to detect, display, and log alarms and events. When there are problems the SCADA system must notify the operators to take corrective action. 5. Acquire real-time data as well as logs data with Real time trend & Historical time trend. 6. Web Connectivity, Real-time displays can be accessed on remotely attached PCs and notebooks using internet.
SCADA Programming shall be done so as operator can visualize and control complete WTP operation from operator desk. All important alarms & events shall be logged. All the data from field instruments & equipments shall be logged. There shall be provision to take reports in required formats of real time & historical data, events & alarms. There shall be provision of broadcasting messages, emails of reporting information. There shall be provision of access sequrity. An Industrial grade Din rail mounting ethernet switch with 5 ports shall be provided. An Industrial grade modem with 4G/5G GSM connectivity shall be provided.
1
418000
418000
... More
Supply, Installation and commissioning of single phase 5KVA online UPS with pure sine wave & float cum boost charger unit with battery rack and maintenance free battery system including cables power plug, switch having application in 3nos 12Volt 65Ah DC Battery (drytype) charging to output continious 4 hrs power backup all complete as per specification and direction of Engineer-in-charge
1
55057
55057
... More
Supplying, Fitting,Commissioning,Fixing double / single chamber DI PN 16 control valve, hydraulically operated, single diaphragm actuated, globe pattern The valve shall consist of three major components; the body with the seat installed; the cover with the bearing installed and the diaphragm assembly. The diaphragm assembly shall be the only moving part and shall form a sealed chamber in the upper portion of the valve, separating the operating pressure from line pressure. Packing glands, stuffing boxes and there shall be no piston operating the main valve or pilot controls. No fabrication or welding shall be used in the manufacturing process. The control will be achieved by operating of 2 number Solenoid Valves mounted on the main Valve,electronic timer controller,Timer,integral oriface plate assembly,differential control,reverse flow control,restriction orifice.The Connecting tubing on the Main Valve will be SS with SS fitting from reputed make. The valve shall be working up to 3.0 kg/cm2 operating pressure Body A216 WCB integrated with PLC pannel for operation (local/remort and web enabled with command and control ) make CLA/SINGER/ VAG to control water supply including the cost of valve cutting the pipeline & making good to the damages including cost of all labours, T&P etc. all complete as per the direction of Engineer-in-charge.(Excluding Valve cost).
(350 MM Backwash)
4
128301
513206
... More
250MM Backwash
4
148840
595361.2
... More
150MM
10
127949
1279496
... More
200MM
10
151159
1511598
... More
Supplying all materials,labour,T&P,of different size cable for fitting of PLC panel as per electrical specification. (1.5 sqmm 8 core armoured cable)
100
606
60600
... More
1.5 sqmm 3 core armoured cable
80
243
19440
... More
0.75sqmm 2 core armoured Instrument(Screen cable)
100
140
14054
... More
CAT-6 Dlink cable
80
25
2000
... More
Cable Gland-25 mm
75
116
8711.25
... More
Cu.logs-1.5/2.5
150
4
675
... More
Providing, erecting and giving test of Centrifugal (HSC) Motor and pump of 65-70 mtr. head, discharge of 134-140 m3/hrs with 70% efficiency for 2 nos pumpset running plus one no. standby conforming to IS 9079 operating at 1440 RPM with impeller, priming funnel, cock, Shunken pump house, suitable flanges at suction and delivery side. Pump shall have common shaft for pump and motor. Motor shall be suitable for working on 0.4KV ± 10%, 3 Ph, 50 Hz A.C. Supply. Motor shall be TEFC type. Pump set shall be suitable for working at various discharge and head requirements. Pump shall be erected on Provided C.C. foundation block with suitable foundation bolts grouted in RCC foundation block with one year free maintenance by agency.
Duty condition.(65-70 mtr. head, discharge of 134-140 m3/hrs) 3 No.x 50hp = 50 HP (2 running + 1 Standby) Make : Kirloskar/WILO/KSB
3
466081
1398243
... More
Design, drawing,Construction of Building for 33KV Indoor HT meter( Cubicle) Room for substation at WTP all complete as per the direction of Engineer-in-charge
24
16080
385920.72
... More
Design , drawing & Construction of Pumpset Foundation Base inside the sunken pump house with minimum size 2.3X1.10X1.10 with M20 grade concrete over 100mm sand filling and 150mm cement concrete . The depth of foundation should be minimum 850mm below the floor level as per site requirement complete in all respect as per direction of Engineer-in-charge.
3
34426
103278.66
... More
Design, Drawing ,earation, testing & Commissioning of 4T EOT crane (electric operatored monorail) double grader I-section Beam with Gantry SQ bar span 12.5 meter and height of lift 6 meter, Fabrication and hosting in place Rail Grader at pump house. Electric operated monorail - 4MT
1
500000
500000
... More
Supplying all materials, labours and T&P for cutting of earth and levelling the bed by mechanical means as per specification and direction of Engineer-in-Charge.
3457.5
21
74924.03
... More
Supplying all labnour, T&P for earth filling by mechanical means from approved quarry, compactiing watering including transportation, royalty all complete as per direction of Engineer-in-Charge
1250
198
247875
... More
Supply all materials, labour and T&P for bush cutting with dressing and levell;ing the bed by engaging mulia as per specification and direction of Engineer-in-Charge
0.83
82663
68197.31
... More
Design, drawing,Construction of Building for Electrical and MCC Control Room, One Storey Building
72
16080
1157762.16
... More
Supplying, Fitting and Fixing of MS angle(2X3 inch)
300
110
33000
... More
Feeder Panel: Enclosure for the LT 630A Capacity ACB control panel board with APFC made out of CR sheet having Size-Height-2000MM X Breadth-4250MM X Depth-1000, Floor mounting with primer coated with Powder coated paint and provided with required gasket for dust / vermin proof with degree of protection IP42 suitable for 415V ,3 phase, 50Hz, 4 wire system fabricated up to 2MM thick (1.6 mm for doors) with panel accessories.{Panel weight consider from analysis}
1026
220
225720
... More
630A,4Pole,50kA/EDO, Microprocessor Based Air Circuit Breaker For Main Incomer(Make-SIEMENS/ L&T/ SCHNEIDER/ ABB/ BCH/C&S)
2
169055
338110.16
... More
25A, Breaker control switches (Trip-Neutral-Close).(Make-L&T/ SIEMENS/ ABB/ BCH/ C&S/ SCHNEIDER/ ANCHOR)
2
741
1483.06
... More
25A,Local-Remote, Auto-Manual Switches.(Make-L&T/ SIEMENS/ ABB/ BCH/ C&S/ SCHNEIDER/ ANCHOR)
2
394
788.98
... More
Indicator(Red/Yellow/Green).(Make-L&T/C&S/ABB/BCH)
10
96
965.3
... More
Indicator(Blue).(Make-L&T/C&S/ABB/BCH)
2
166
332.8
... More
Three phase Digital Ammeter Accuracy class-1.0. (96 x 96 MM/MAKE--SECUR/ C&S/ TECHNO) (l.S)
2
1381
2762.5
... More
Three phase Digital Volt meter Accuracy class-1.0. (96 x 46 MM/MAKE--SECURE/ C&S/ TECHNO) (L.S)
2
1381
2762.5
... More
10A/AC3 Auxiliary Contactor/ 230V .(Make-L&T/ BCH/ TC/ABB/ C&S /SIEMENS/SCHNEIDER/ANCHOR)
4
1051
4206.76
... More
6A /4Pole M.C.B.for meter wiring. (Make-L&T/BCH/TC/ABB/C&S)
2
1090
2181.36
... More
6A /2Pole M.C.B.for fan & relay wiring. (Make-L&T / BCH/ TC / ABB/C&S)
2
501
1002.54
... More
32A/3Pole M.C.B. (Make-L&T/ BCH/TC/ABB/ C&S)
3
798
2396.19
... More
Copper Bus-Bar(40MM X10MM)/ (50MM X8MM).Weight consider from analysis.
108
980
105840
... More
600/5A VA-15,CL-1,ID-70MM C.T. (Make-RISHABH/KAPPA/ AE / ELMEX) (L.S)
6
585
3510
... More
50-63A/4Pole M.C.C.B,36kA{For light load-1nos & ancillary load-1nos}.(Make-L&T/ SIEMENS/ ABB/ BCH/ C&S/SCHNEIDER)
3
7177
21533.91
... More
1.5MM² single core copper cable. (Make-POLYCAB/ HAVELLS /FINOLEX/KEI)(L.S)
60
26
1602
... More
4MM² single core copper cable. (Make-POLYCAB/ HAVELLS /FINOLEX/KEI)(L.S)
45
68
3095.1
... More
10MM² single core copper cable. (Make-POLYCAB/ HAVELLS /FINOLEX/KEI)(L.S)
51
180
9218.25
... More
1.5MM² Cable Socket (Cop). (Make-KAYCEE/PTR/ DOWELLS) (L.S)
60
2
147
... More
4-6MM² Cable Socket (Cop). (Make-KAYCEE/PTR/ DOWELLS) (L.S)
45
6
307.35
... More
10MM² Cable Socket (Cop). (Make-KAYCEE/PTR/ DOWELLS) (L.S)
48
9
448.32
... More
25 X 25 MM PVC Cable Ducts. (Make-L&T/SALZER/ KAYCEE)
3
82
247.11
... More
25 MM PVC Cable Ducts Cover. (Make-L&T/ SALZER /KAYCEE)
3
35
107.55
... More
150MM cable Tie.(Make-HOODS/ ELETTRO) (L.S.)
20
1
28.6
... More
200MM cable Tie.(Make-HOODS/ ELETTRO) (L.S.)
60
1
117
... More
PVC Tape(Make-STEELGRIP/ ANCHOR/CONA) (L.S.)
2
10
21.62
... More
MCB fixing Iron Channel / DIN 15/5.5MM - 1M ( suitable for M4 Terminal).(Make-WAGO/SALZER)
2
73
146.44
... More
Finger Type Insulator/one Bus -Bar Support For Capacitor Bank.(Make-RAMANUJ/WAGO)
80
32
2592
... More
Bakelite sheet(Thick-4MM, Required size - 10" X 28" = 4nos, 10" X 18" = 10nos, 10" X 8" = 2nos, 28" X 28" = 4nos,35" X 28" = 2nos)
8176
1
12264
... More
12MM PVC Spiral (L.S.)
2
12
25
... More
25MM X 25MM PVC Mount (L.S.)
30
3
105
... More
2.5MM² Ferrules.(L.S.)
45
-
36
... More
73MM Colour Insulated Heat Shrinkable Sleeves.(Make- RAMANUJ) (L.S)
30
34
1026
... More
Galvanized coated nut-bolt,Plain washer,Spring washer (L.S.)
15
112
1680
... More
Supply, Installation, Testing and Commissioning of 45KW VFD, following specification:- Ambient temperature - -10 to + 50°C; up to + 60°C with derating at 2% per degree rise in temperature. Protection design - IP20 standard, NEMA Type 1-Kit ( optional), IP55/NEMA Type 12 external heatsink ( factory option). Mounting - Horizontal ( 0.75 KW to 75 kW (HD). Overload capacity - 150 % 1 min. (HD, heavy duty) or 110% / 1min. (ND, normal duty. Rated voltage - 200 to 240 VAC, -15 to +10 % 50 / 60 Hz +/-5 %. Output frequency - 0 to 590 Hz. Carrier frequency - 400V Class; 2-15 kHz up to 55KW (ND) ; 2-10 kHz from 75 kW (HD); 2 kHz from 250 kW to 355 kW (ND).Control inputs - 8 digital (sink / source), 3 analog (current/voltage), 1 pulse (HTL, max. 32 kHz), Control output - 4 relay 2 analog ( current/voltage), 1 pulse (HTL, max. 32kHz), 24 Vdc for external sensors available (max. 150 mA) Motor types - Induction Motor ( IM), permanent Magnet Motor (IPM/SPM), Synchronous Reluctance Motor(S (SynRM).Protective functions - Stall prevention, overload prevention,overtemperature prevention - and further protective functions for the motor,the application and the inverter drive. Self-monitoring - Monitoring of main components ( fans, IGBTs, capacitors, charging circuit) with alarm when reaching a certain lifetime.(Make-SIEMENS/ L&T/ SCHNEIDER /ABB/ YASKAWA)
4
292750
1171000
... More
160A/3Pole M.C.C.B,50k (Make-L&T/ ABB/ SIEMENS / BCH/ C&S/ SCHNEIDER)
4
7195
28783.04
... More
250A/3P/1set of 6 Spreader Terminals. (Make-L&T/ C&S/ BCH/ TC/ABB/SCHNEIDER/SIEMENS)
4
1347
5388.12
... More
Three phase Digital Ammeter Accuracy class-1.0. (96 x 48 MM/MAKE--SECUR/C&S/TECHNO)
4
1168
4675
... More
Three phase Digital Volt meter Accuracy class-1.0. (96 x 48 MM/MAKE--SECURE/ C&S/ TECHNO)
4
1168
4675
... More
Indicator(Red/Yellow/Green).(Make-L&T/C&S/ABB/BCH/TC)
20
96
1930.6
... More
Indicator(Blue).(Make-L&T/C&S/ABB/BCH/TC)
4
166
665.6
... More
6"Cooling fan(MAKE-HIGH COOL / SALZER/ KAYCEE)
16
1551
24820
... More
6A /4Pole M.C.B.for meter wiring. (Make-L&T/BCH/TC/ABB/C&S)
4
1090
4362.72
... More
6A /2Pole M.C.B.for control wiring (Make-L&T/BCH/TC/ABB/C&S)
16
501
8020.32
... More
10A/AC3 Auxiliary Contactor/ 230V .(Make-L&T/ BCH/ TC/ABB/ C&S /SIEMENS/SCHNEIDER/ANCHOR)
12
1051
12620.28
... More
160A, Din Type HRC Fuse Links. (Make-L&T/ SIEMENS/ ABB/ BCH/ C&S/SCHNEIDER)
12
515
6183
... More
63-160A, Din Type HRC Fuse Base.(Make-L&T/ SIEMENS/ ABB/BCH/ C&S/SCHNEIDER)
12
294
3539.04
... More
1kva(as per VFD control voltage required) Control transformer.
4
2450
9800
... More
Copper Bus-Bar(25MM X6MM) weight consider from analysis
27
980
26460
... More
150/5A VA-15,CL-1,ID-45MM C.T. (Make-RISHABH/KAPPA/AE/ ELMEX)
12
522
6264
... More
Push-Button with Indicator(Make-L&T/BCH/TC/ABB/C&S)
8
162
1301.68
... More
Contact Element-NO/NC.(Make-L&T/BCH/TC/ABB/C&S)
8
43
347.12
... More
1.5MM² single core copper cable. (Make-POLYCAB/ HAVELLS /FINOLEX/KEI)(L.S)
100
26
2670
... More
1.5MM² Cable Socket (Cop). (Make-KAYCEE/PTR/DOWELLS) (L.S)
150
2
342
... More
Single Pole Bus-Bar Support (Make-RAMANUJ/WAGO)
18
37
680.4
... More
25 X 25 MM PVC Cable Ducts.(Make-L&T/SALZER/ KAYCEE)
3
82
247.11
... More
25 MM PVC Cable Ducts Cover.(Make-L&T/ SALZER /KAYCEE)
3
35
107.55
... More
150MM cable Tie.(Make-HOODS/ ELETTRO) (L.S.)
20
1
28.6
... More
200MM cable Tie.(Make-HOODS/ ELETTRO) (L.S.)
60
1
117
... More
PVC Tape(Make-STEELGRIP/ ANCHOR/CONA) (L.S.)
2
10
21.62
... More
MCB fixing Iron Channel / DIN 15/5.5MM - 1M ( suitable for M4 Terminal).(Make-WAGO/SALZER)
1
73
73.22
... More
12MM PVC Spiral (L.S.)
2
12
25
... More
25MM X 25MM PVC Mount (L.S.)
30
3
105
... More
2.5MM² Ferrules.(L.S.)
120
-
96
... More
48MM Colour Insulated Heat Shrinkable Sleeves.(Make- RAMANUJ)
20
22
450
... More
Galvanized coated nut-bolt,Plain washer,Spring washer (L.S.)
15
112
1680
... More
90 KVAR APFC PANEL:
160-200A/3Pole M.C.C.B,36kA (Make-L&T/ ABB/ SIEMENS/ BCH/C&S/ SCHNEIDER)
1
14949
14949.15
... More
250A/3P/1set of 6 Spreader Terminals. (Make-L&T/ C&S/ BCH/ TC/ABB/SCHNEIDER/SIEMENS)
1
1347
1347.03
... More
6A /4Pole M.C.B.for meter wiring. (Make-L&T/BCH/TC/ABB/C&S)
1
1090
1090.68
... More
6A /2Pole M.C.B.for fan & relay wiring. (Make-L&T/BCH/TC/ABB/C&S)
2
501
1002.54
... More
10A /3Pole M.C.B.for 5KVAR capacitor(Make-L&T/ ANCHOR /C&S/ABB/BCH/SIEMENS)
1
798
798.73
... More
20A /3Pole M.C.B.for 10KVAR capacitor(Make-L&T/ MARU/ C&S /ABB/BCH/ANCHOR/LEGRAND)
1
798
798.73
... More
32A /3Pole M.C.B.for 15KVAR capacitor(Make-L&T/ MARU/ C&S /ABB/BCH/ANCHOR/LEGRAND)
1
798
798.73
... More
40A /3Pole M.C.B.for 20KVAR capacitor(Make-L&T/ MARU/ C&S /ABB/BCH/ANCHOR/LEGRAND)
3
1231
3693.42
... More
1.5MM² single core copper cable. (Make-POLYCAB/ HAVELLS /FINOLEX/KEI) (L.S)
140
26
3738
... More
2.5MM² single core copper cable {For 5KVAR Capacitor} (Make-POLYCAB/ HAVELLS /FINOLEX/ KEI) (L.S.)
18
44
796.5
... More
4MM² single core copper cable {For 15KVAR Capacitor} (Make- POLYCAB/HAVELLS /FINOLEX/ KEI) (L.S.)
9
68
619.02
... More
6MM² single core copper cable {For 20KVAR Capacitor} (Make- POLYCAB/HAVELLS /FINOLEX/ KEI) (L.S.)
27
102
2769.12
... More
Indicator(Red/Yellow/Green).(Make-L&T/C&S/ABB/ BCH)
8
96
772.24
... More
Indicator(Blue).(Make-L&T/C&S/ABB/BCH)
1
166
166.4
... More
Three phase Digital Ammeter Accuracy class-1.0. (96 x 48 MM/MAKE--SECURE/ TECHNO/ C&S) (L.S)
1
1168
1168.75
... More
Three phase Digital Volt meter Accuracy class-1.0. (96 x 48 MM/MAKE--SECURE/ TECHNO/ C&S) (L.S)
1
1168
1168.75
... More
1.5MM² Cable Socket (Cop). (Make-KAYCEE/PTR/DOWELLS) (L.S)
130
2
340.6
... More
2.5MM² Cable Socket (Cop). (Make-KAYCEE/PTR/DOWELLS) (L.S)
36
4
169.2
... More
4-6MM² Cable Socket(Cop).(Make-KAYCEE/PTR/DOWELLS) (L.S.)
72
7
524.16
... More
200/5A VA-15,CL-1,ID-45MM C.T. (Make-RISHABH/KAPPA/AE/ ELMEX)
3
774
2322
... More
6 Steps APFC Relay,230V (Make-EPCOS/L&T/C&S)
1
10824
10824.41
... More
1kva/0-280V Control transformer.
1
2450
2450
... More
7KVAR Capacitor duty contactor. (Make-EPCOS/L&T/ C&S)
1
1782
1782.37
... More
10KVAR Capacitor duty contactor. (Make-EPCOS/ L&T/ C&S)
1
1857
1857.63
... More
16KVAR Capacitor duty contactor. (Make-EPCOS/ L&T/ C&S)
1
2578
2578.98
... More
20KVAR Capacitor duty contactor. (Make-EPCOS/ L&T/ C&S)
3
3072
9217.62
... More
5KVAR Capacitor,440V(Make-EPCOS/C&S/L&T)
1
1913
1913.94
... More
10KVAR Capacitor,440V(Make-EPCOS/L&T/C&S)
1
3736
3736.4
... More
15KVAR Capacitor,440V(Make-EPCOS/L&T/C&S)
1
5604
5604.24
... More
20KVAR Capacitor,440V(Make-EPCOS/L&T/C&S)
3
7472
22416.24
... More
4"Cooling fan(MAKE-HIGH COOL / SALZER/ KAYCEE)
4
684
2737
... More
Copper Bus-Bar(25MM X6MM). (Weight consider from analysis)
6
980
5880
... More
Single Pole Bus-Bar Support(Make-RAMANUJ/WAGO)(L.S)
8
37
302.4
... More
Base 2pole connector(Make-RAMANUJ/WAGO) (L.S)
1
118
118.8
... More
MCB fixing Iron Channel / DIN 15/5.5MM - 1M ( suitable for M4 Terminal).(Make-WAGO/SALZER)
4
73
292.88
... More
25 X 25 MM PVC Cable Ducts.(Make-L&T/ SALZER / KAYCEE)
5
82
411.85
... More
45 X 30 MM PVC Cable Ducts.(Make-L&T/SALZER /KAYCEE)
2
115
231.86
... More
25 MM PVC Cable Ducts Cover.(Make-L&T/ SALZER /KAYCEE)
5
35
179.25
... More
45 MM PVC Cable Ducts Cover.(Make-L&T/ SALZER/ KAYCEE)
2
67
135.76
... More
150MM cable Tie.(Make-HOODS/ELLETRO).(L.S.)
20
1
28.6
... More
200MM cable Tie.(Make-HOODS/ELLETRO).(L.S.)
60
1
117
... More
PVC Tape(Make-STEELGRIP/ ANCHOR/CONA).(L.S.)
6
10
64.86
... More
12MM PVC Spiral.(L.S.)
15
12
187.5
... More
25MM X 25MM PVC Mount.(L.S.)
30
3
105
... More
2.5MM² Ferrules.(L.S.)
120
-
96
... More
48MM Colour Insulated Heat Shrinkable Sleeves.(Make- RAMANUJ)
4.5
34
153.9
... More
Galvanized coated nut-bolt,Plain washer,Spring washer.(L.S.)
18
112
2016
... More
Fitting,installating and commissioning for the all components(Feeder Paner, VFD, APFC Panel) assembling with Bus-Bar wiring,internal power and control wiring etc complete as require as per direction of Engineer-in-Charge
1
127966
127966.37
... More
Installation and commissioning of panel.L.T 300MM²,3½Core/ X 1R,Armoured,Aluminium Cable.(Make-HAVELLS/POLYCAB /FINOLEX/KEI) {For transformer to panel DG to panel)
200
2958
591780
... More
L.T 25MM²,3.5Core/ ,Armoured, Aluminium Cable.(Make-HAVELLS/ POLYCAB /FINOLEX/KEI) {For transformer to panel DG to panel)
50
353
17675
... More
L.T 10MM²,4Core/ ,Armoured, Aluminium Cable.(Make-HAVELLS/ POLYCAB /FINOLEX/KEI) {For transformer to panel DG to panel)
50
281
14070
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/HUME/ METAL pipe as required. (Above 185MM² and upto 400MM² )
200
134
26800
... More
Upto 35MM² and upto 95MM² (For 3½core/25MM²-50Mtr )
50
57
2850
... More
Upto 35MM² (For 4core/10MM²-50Mtr )
50
37
1850
... More
50MM² single core/ X 3R flexible copper cable.(Make-HAVELLS/ POLYCAB/ FINOLEX/KEI)
300
874
262350
... More
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required. (Above 35MM² and upto 95MM² cop)
300
92
27600
... More
50MM² Cable Socket(Cop). (Make-KAYCEE/PTR/DOWELLS)(L.S.)
50
40
2046
... More
Supplying and installing following size of perforated painted with powder coating M.S cable trays with perforation not more than 17.5%, in convenient section, joined with connectors, suspended from the celling with M.S suspenders including bolts & nuts, painting suspenders etc as required. (200 mm width X 50 mm depth X 1.6 mm thickness.)
30
689
20670
... More
300 mm width X 50 mm depth X 1.6 mm thickness.
50
777
38850
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. (3½ X 300MM² (70mm) {Alu})
4
1195
4780
... More
3 X 50MM² (28mm) {cop}
16
351
5616
... More
Supplying and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. (3½ X 300MM² {Alu})
3
3088
9264
... More
Supply, installation and testing of Maintenance free safe Earthing Electrodes with ISI G.I pipe dia 75mm as Secondary electrode with wall thickness of 2.6 mm and the Primary Earthing Electrode will be 50mm X 6mm X 1no M.S hot dipped galavanized strip filled with a highly conductive & non-corrosive compound in between the Primary Earthing and the secondary Earthing, the surface Area in will be 7,06,500sqmm for 3mtrs length and cross sectional primary conducting area is 300 sq.mm An Solid G.I Base plat seals the unit at the bottom and providing of masonry enclosure with cover plate.as per direction of Engg.-in-charg (MES- GFC ground Filling compound will be provided in 25 kgs Bags.) (MES-GFC ground Filling compound will be provided in 25 kgs Bags.) (2 bags required for each earthing electrode.) 2nos earthing connection all motors and 2nos earthing connect in all panel.
4
12061
48247.2
... More
Providing and fixing 25 mm X 5 Mm G.I . Strip on surface or in recess for connections etc. as required.
60
244
14640
... More
Supplying,fitting and fixing of following materials.First aid Box.
1
750
750
... More
Supplying,fitting and fixing of following materials.Shock treatment chart.(Odia / Hindi & English )
1
525
525
... More
Supplying,fitting and fixing of following materials.8MM thick Rubber Mat.
6
770
4620
... More
Supplying,fitting and fixing of following materials.Danger Board.(200MM X 1500MM)
1
120
120
... More
Pumping Arrangement: Supplying all labour and T&P for providing and laying MS pipe and specials confirming to IS 3589/99 of quality grade FE 410/ GI Pipe (Medium) confirming to specification of following nominal dia and including transportation of pipes and fitting to site etc all complete as per the direction of Engineer-in-Charge.
(150mm dia M.S.Pipe 4.50mm thick)
80
1579
126336
... More
150mm dia M.S. Flange.(12mm thick)
40
1348
53948.8
... More
150mm dia x 45' M.S. Bend
20
4036
80722
... More
200mm dia M.S.Pipe (6.30mm thick)
100
2805
280560
... More
200mm dia M.S. Flange.(12mm thick)
50
1541
77068.5
... More
200mm dia x 45' M.S. Bend
25
5635
140895
... More
Supplying all labour and T&P for cutting of following dia MS pipe of following thick in treanches by gas cutter set of pocket etc all complete
27.57
1137
31366.39
... More
Supplying all labour and T&P for jointing following dia MS pipe up to 8.0mm thick in treanches by electric arc welding & genetator set of pocket etc all complete
55.75
2569
143221.75
... More
( Proposed WTP) Supplying all materials Labour & T & P for Fixing Ductile Iron Actuator Sluice Valve / NR Valve with double flanged ends for water works purposes conforming to IS specification for the following nominal diameters as per specification complete including cost of Sluice valve .
(200mm dia D/F Actuator Sluice Valve (PN1.6) (Make: KIRLOSKAR/VAGUE/TALIS)
5
216750
1083750
... More
200mm dia D/F Non Return Valve (PN1.6)(KIRLOSKAR/VAGUE/TALIS)
5
48096
240482.5
... More
(For Existing WTP) 250mm dia D/F Actuator Sluice Valve (PN1.6) (KIRLOSKAR/VAGUE/TALIS)-EXISTING
2
238750
477500
... More
250mm dia D/F Non Return Valve (PN1.6)(KIRLOSKAR/VAGUE/TALIS)-EXISTING
2
76311
152622.2
... More
Providing, installation, testing and commissioning of Electromagnetic Flow Meter etc. including all materials(excluding CI/DI fittings) and making connection with existing pipeline required for Electromagnetic Flow Meter including cutting the existing pipe line etc. complete in all respect as per technical specification and as per direction of Engineer
(400MM Dia) Make : Krone Marshall, Endress & Hauser, Adept,ABB, Siemens.
1
342746
342746
... More
Supply with fitting and fixing of of D.I. Mechanical dismentaling joint for use to main uninterrupted water supply in the pipeline in case eof rpair of Flow meter as per specification and direction of Enginer - in - charge (400MM Dia)
1
37737
37737
... More
Boundary Wall :
Supplying all labour, T&P and Earthwork in all kinds of soil leveling the bed & including sundries, supervision charges, contractor profit & labour cess etc, & as per the direction of engineer- in-charge.
116.65
293
34183.12
... More
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to work site, payment of royalty, contractor profit & labour cess etc, all complete as per specification and direction of Engineer-in-charge.
12.95
599
7759.64
... More
Supplying all labour, T&P and providing Cement Concrete (1:3:6) using 4cm HBG crusher metal including watering curing, supervision conveyance of all materials to worksite, payment of royalty, taxes etc. all complete in F&P as per specification and direction of the Engineer-in-charge.
12.95
6038
78203.76
... More
R.C.C work in ground floor of M-20 grade with 20mm & down grade crusher broken hard Granite chips including cost of all labour, materials with all taxes, lead,T & P etc all complete .
96
6158
591206.4
... More
Supplying all materials, labour, T&P and providing rigid and Smooth centering and shuttering for R.C.C. works including False work and dismantling them after casting including Conveyance of all materials to Work site, payment of royalty,contractor profit & labour cess etc all complete as per specification and direction of Engineer-in-charge.
(Beam)
572
247
141570
... More
Column
288
1189
342518.4
... More
Supplying all materials, labour, T&P and providing M.S. reinforcement for R.C.C. work including cutting, bending, binding and laying the grill and position including cost of binding wire 18 to 20 gauge, conveyance of all materials to Work site, payment of royalty, contractor profit & labour cess etc all complete as per specification and direction of Engineer-in-charge (SAIL STEEL TMT-EQR 500/IS 1786 Fe 500 D)
76.8
8693
667653.12
... More
Supplying all materials, labour, T&P and Providing Brick work with Fly Ash Bricks 25cm x 12cm x 8cm size having crushing strength not Less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar(1:6 ) in S/S including cost of conveyance & royalty, sundries & watering for curing & supervision charges, contractor profit & labour cess etc, all complete as per the direction of Engineer-in-charge.
207
5463
1130923.8
... More
Supplying all materials, labour, T&P and making 12mm thick cement plaster in cement mortar (1:6) for brick or stone masonry work for brick work including watering, curing, conveyance of all materials to worksite, payment of royalty, contractor profit & labour cess as per the direction of engineer-in-charge.
1225
184
226257.5
... More
Supplying all materials, labour, T&P and making 16mm thick cement plaster in cement mortar (1:6) for brick or stone masonry work for brick work including watering, curing, conveyance of all materials to worksite, payment of royalty, contractor profit & labour cess as per the direction of engineer-in-charge.
1100
266
293370
... More
Supplying all materials, labour, T&P and filling of foundation and plinth with excavated materials with all kinds of soil as per the direction of engineer-in-charge.
38.9
162
6332.92
... More
Supplying all materials, labour, T&P and providing Priming 1 coat with any appproved Primer including all materials, conveyance, contractor profit & labour cess etc, all complete as per the direction of Engineer-in-charge. (on Plastered surface)
2325
81
189255
... More
Supplying all materials, labour, T&P and providing two coat of Weather Coats with any approved shades including cost of conveyance, brushes, sundries, contractor profit & labour cess etc all complete as per the direction of Engineer-in-charge
2325
99
231802.5
... More
Boundary Gate:
Supplying all labour, T&P and Earthwork in excavation in Stony earth and gravels mixed with stone & boulders not exceeding 0.014 cum in volume with in 50mtr. Initial lead & 1.50m. initial lift including rough dressing, breaking clods & laying in layers not exceeding 0.30m In depth, leveling the bed & including sundries, supervision charges, contractor profit & labour cess etc, & as per the direction of engineer- in-charge.
3.46
293
1013.92
... More
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to work site, payment of royalty, contractor profit & labour cess etc, all complete as per specification and direction of Engineer-in-charge.
0.29
599
173.77
... More
Supplying all labour, T&P and providing Cement Concrete (1:3:6) using 4cm HBG crusher metal including watering curing, supervision conveyance of all materials to worksite, payment of royalty, taxes etc. all complete in F&P as per specification and direction of the Engineer-in-charge.
0.29
6038
1751.28
... More
R.C.C work in ground floor of M-20 grade with 20mm & down grade crusher broken hard Granite chips including cost of all labour, materials with all taxes, lead,T & P etc all complete and as per the per direction of Engineer-in-charge
1.77
6158
10900.37
... More
Supplying all materials, labour, T&P and providing rigid and Smooth centering and shuttering for R.C.C. works including False work and dismantling them after casting including Conveyance of all materials to Work site, payment of royalty,contractor profit & labour cess etc all complete as per specification and direction of Engineer-in-charge. (Beam)
3.86
247
955.35
... More
Column
7.2
1189
8562.96
... More
Supplying all materials, labour, T&P and providing M.S. reinforcement for R.C.C. work including cutting, bending, binding and laying the grill and position including cost of binding wire 18 to 20 gauge, conveyance of all materials to Work site, payment of royalty, contractor profit & labour cess etc all complete as per specification and direction of Engineer-in-charge (SAIL STEEL TMT-EQR 500/IS 1786 Fe 500 D)
1.42
8693
12344.63
... More
6 mm thick cement plaster (1:4) to R CC surfaces finished smooth including closed deep chiping and slury treatment including cost of all labour, materials with all taxes, lead,T & P etc all complete and as per the direction of Engineer-in-charge
7.2
213
1535.04
... More
Supplying all materials, labour, T&P and filling of foundation and plinth with excavated materials with all kinds of soil as per the direction of engineer-in-charge.
1.15
162
187.22
... More
Supplying all materials, labour, T&P and providing Priming 1 coat with any appproved Primer including all materials, conveyance, contractor profit & labour cess etc, all complete as per the direction of Engineer-in-charge. (on Plastered surface)
7.2
81
586.08
... More
Supplying all materials, labour, T&P and providing two coat of Weather Coats with any approved shades including cost of conveyance, brushes, sundries, contractor profit & labour cess etc all complete as per the direction of Engineer-in-charge
7.2
99
717.84
... More
Supplying all materials, labour, T&P and Fitting & Fixing of SS Gate including cost of conveyance, contractor profit & labour cess etc., all complete as per the direction of Engineer-in-charge. (2 Leaf SS Gate (Size 6.0 M x 1.8 M Ht.)
324
130
42120
... More
1 Leaf SS Gate (Size 1.3 M x 1.8 M Ht.)
70.2
130
9126
... More
(Approach Road) Supplying all materials, labour, T&P and filling of road surface with borrow earth (1.0 mtr.) from the approved quarry and compacting to the required density with testing including cost of royalty, lead & transportation & labour cess etc all complete as per the direction of Engineer-in-charge.
600
170
102240
... More
Construction of granular sub-base by providing Coarse graded Grading-II material as per Table 400-2, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401
50
2423
121184
... More
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per Clause 406 of MoSRT&H Specifications for Road & Bridge works.
92
2934
269980.44
... More
P.C.C.(1:3:6) in foundation & plith using 40 mm size b.h.g.c.b metal including mixing of materials and laying in well prepared surface & compacting, watering curing with cost, conveyance, royalities of all materials, T&P and Labour charges etc. complete in all respecte as per Scope & Technical Specification & direction of Engineer-in-Charge.
40
6038
241556
... More
M30 Grade Concrete using 20mm to 10mm size crushed stone aggregates mixed by concrete mixer, laying in layers compacting by vibrator with proper cambering and filling berm by excavated earth and all leads and lifts including frame works etc. complete in all respecte as per Scope & Technical Specification given at Section 8 & 9 of DTCN & direction of Engineer-in-Charge. (In foundation & plinth)
60
6550
393042
... More
Supply of manpower for WTP daily for five year operation and maintenance including materials require for repair and maintenance of pipe lines , WTP, Sluice valves, air valves, NR Valves, MS pipe, Pump Motor, tighting of nut & Bolt, greasing and maintening cleanliness and sanitation of pump house, surver of Pipe line, leakege detection on daily surver and mending if any and watch & ward of this project etc. WTP premises clean, detection of leakages and mending and weather coating and display board writing, painting, repair and replacement of damaged items, spares etc.for the item of the works executed under this project (Including contribution towards EPF, ESI, Labour cess, Contractors Profit & OH Charges but excluding cost of chemicals & Energy charges) and as per specification and direction of the Engineer-in-charge MAN POWER Electrician-.01 Nos, ,Lab Assistant at WTP-.01 Ns, Filter Operators 3 nos , Helper- 2 nos , Watchman-1 nos
1
15139400
15139400.33
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%