Public Health Engineering Organisation Tender

Design, drawing, with prior submission and approval of pump performance Data sheet and curve with Pump & Motor GA Drawing and Supplying, fixing, testing, commissioning of 2 nos of 50 HP Three Phase Open Well vertical Submersible Set Pump Set having Discharge of 230-260 m3/h at a Total Head of 35-45 Mtr inculding flange, fittings with all ancilary work as per site requiement in complete and as per direction of Engineer-in-charge. Make : Luby/KSB/Kirloskar and equivalent (Delivery Challan, Warrenty card cum Testing certificate, Invoice of authorised supplied company and Detail list for tools & accessories to be submitted at the time of delivery) .

200 mm dia 12 mm thick MS flange

Providing & Fixing of Sluice Valve Rating PN-1.6 (IS:14846-2000)of kirlosker/vag/audco or equivalent of non rising spindle type (Standard) with double flanged ends for water works purpose for the following rating & nominal dia. including cost of nuts & bolts, rubber insertation inculding cost of sluice valve as per specification complete. 200mm dia C.I. S.V

Supplying all materials, labour and T & P etc. and construction of valve chamber of following sizes with 100mm thick sand filling in foundation and inside chamber, lean cement concrete (1:4:8) of 150 mm thick, well burnt Klin Burnt brick masonry in cement mortar (1:4) of 250mm thick wall in foundation and plinth, 12 mm thick cement plaster (1:6) inside, 100 mm thick cover slab in M-20 R.C.C. (1 : 1½ : 3) using minimum reinforcement of HYSD bar in cover slab at 100Kg. per each Cum. of RCC, 50mm thick cement concrete (1:2:4) in bed and wall top including centring and shuttering, earthwork in all kinds of soil and refilling etc. as per specification and direction of the Engineer-in-charge, including transportation of all materials to site, all complete. Sluice Valve Chambers of inside size 1.5-0m x 1.5-0m x 1-0m

300 mm dia 16 mm thick MS flange

Construction of concrete base for DG set..Supplying all material, labour T&P for Earth work excavation in all kind of soil within 5 mtr. initial lead, 1.5 mtr. initial lift including rough dressing and breaking clod to maxium 5 cum to 7 cum & laying in layer not excluding 0.3 mtr. depth etc. all complete as per direction of Engineer incharge.

Supplying all materials, labour, T&P for filling sand in foundation & plinth including cost, carriage, royalty, taxes of all materials to work site etc.all complete as per direction of Engineer incharge.

Supplying, fitting, and fixing of Flat Three Core PVC Insulated & PVC Sheathed Industrial coper Cable for Submersible Pump Motors(16 sqm mm)

Cement concrete (1:2:4) with 12mm size HGCB chips for sump.

Flame cutting and facing of MS plate upto 8mm thick as per specification complete.

Supplying, installation and commissioning of 15 kva single phase disel generator with manual panel at Subdivision office pump house.

300mm dia C.I. S.V

Supplying, fitting, and fixing of 120sqmm armoured cable of 3.5 core copper cable, Make : Havells/Finolex/Polycab

300mm Dia. MS Flange

Soil testiing, Cube testing, Design, Drawing, Construction, Testing, Commissioning of 5.00 lakh ltr UGR with arrangement of stair case and all other ancilary work as per the site requiement at MLA para pump house as per the direction of engineer in-charge with piping arrangment upto 5 mtr.

Supplying, installation and commissioning of 100 kva disel generator with manual panel at MLA Para,Patavadi and Block chhak pump houses.

Providing joints by welding with two welding beads / pass,conforming to IS-816-1998 (Fillet weld) to MS pipes and fittings at site by using welding, generator including testing of joints, as per specification complete.

Supply, Installation, Testing & Commissioning of ATS Control pannel & necessary fittings and all other ancilary work as per the site requirement in complete manner and as per direction of Engineer-incharge. For 50HP-2No

Supplying all labour T&P and cutting, binding and tying the grills and placing in position including cost of labour and M.S. rod with binding wire of 18 to 20 gauge etc all complete.

Supply of all labour, T&P and M.S. pipe of Medium Class (ISI Marked) of the following out side diametre conforming to IS:3589-2001 for fabrication of different size of M.S. specials including laying ln trenches, jointing, fitting, fixing of pipe line and specials making welding, jointing and flange joint where ever required.The welding shall confirm to I.S. standard & electrodes use shall have I.S. certification mark. The welding of pipe and fitting shall be done by diesel generator set as per the site condition.The pipe and fitting shall be painted with two coats of brown anticorrosive paint over a coat of primer etc. all complete and transportation to site as per direction of Engineer-in-charge. (Earthwork in trenches, jointing of pipes, specials and fittings to be measured separately). 219.10 O.D MS pipe of 6.3 mm thickness of Medium Class & ISI Marked.

Supplying all labour T&P, providing Flanged Joints conforming to IS : 3114-1994 to flanged cast iron pipes and fittings of the following nominal diameter inculding testing of joints, cost of bolts and nuts and rubber insertations as per specifications complete 200mm Dia. MS Flange

Supplying all materials, labour T&P for cement concrete in cement motor (1:3:6) with 40mm size HGCB metal including cost, royalty,carriage, taxes of all materials to the work site etc. all complete as per direction of Engineer incharge.