Panchayati Raj And Drinking Water Department Tender

Priming 1 coat with wall primer water bond cement primer including all labour, materials etc. complete.

Labour charges for fitting and fixing of departmental M.S. Gates, steel windows M.S. window grills to windows and opening and collapsible gate with top and bottom rails in proper position including making holes in walls, R.C.C. stucture and wood work etc. and making good the damages to walls or R.C.C. structure including mending or cutting to sizes or grooves in walls and fixing with R.C.C. (1:2:4) with hard black crusher broken/hand broken granite stone chips of 12mm to 20 mm. (20mm not to exceed 25%) with cost and conveyance of all materials, Iron works, labour taxes and royalities with all T&P etc. complete in all floors. As Directed by Enginner-in-charge.

Cement concrete of proportion (1:3:6) in foundation using 4 cm size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm thick to the required level ramming watering and curing etc. complete including cost and conveyance of all materials with all taxes and royalties and all labour with T&P required for the work etc. complete, including dewatering if required and as directed by the Engineer-in-charge.

Brick work with Flyash Bricks 23cm x 11cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) in Foundation and Plinth including watering curing, cost of carriage, royalty and taxes of all materials, cost of all labour, etc complete as per the direction of E.I.C.

Cement Concrete (1:2:4) using 12mm size hard granite C.B. chips approved quality from approved quarry including cost, carriage, royalty, cost of all labour. etc complete and as directed by E.I.C.

RCC work of M 20 Grade with 20mm and down grade black hard granite crusher broken stone chips including hoisting and laying having a minimum compressive strength (in work test) of 200 kg/cm sqm in 15cm cubes at 28 days with IS 456 and 516 using 10mm to 20mm size (20mm not to exceed 25%) hard black crusher broken granite stone chips of approved quality and from approved quarry including hoisting lowering laying and compacting concrete watering and curing for 4 weeks including centring shutering and finishing the exposed surfaces smooth with cost, conveyance, royalties and taxes of all materials and labour with T&P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire 18mm to 20mm gauge and labour charges for straightening, cutting, bending, binding etc. of the M.S. rods or Tor steel and binding wire 188 to 20 mm gauge and labour charges for straightening, cutting, bending, binding etc of the M.S rods or Tor steel and binding wire and tying the grills and placing in proper position and as directed by the Engineer-in-charge. COLUMN BASE

Straightening bend up or coiled rods cutting bending, binding, cranking, hooking, welding or jointing (if required) the MS rods or tor steel and binding wires and binding tying the grills, hoisting, lowering and placing in proper position as required for RCC works including cost, conveyance and taxes of MS Rods or Tor steel and binding wires of 18 to 20 gauge and labour with all T & P required for the work etc. complete in all floors (weight of binding wire will not be considerd for payment and payment will be made onweight of MS rods or Tor steel with piece as per codal provision only and as directed by the Engineer-in-charge

Earthwork in excavation in foundation in hard soil with all leads and lifts including dressing and levelling the bed and depositing the excavated earth at places away from work site with all leads and lifts including cost of all labour and T&P and dewatering if required for the work etc. complete and as directed by the Engineer-in-charge.

Supplying and filling in foundation and plinth with sand not exceeding 23.0 cm thick in layers including watering and ramming with the cost conveyance royalties, taxes of the materials and labour with T&P required for the work etc. complete ( Measurement will be taken on finished compacted section)only as directed by Engineer-in-charge.

RCC work of M 20 Grade with 20mm and down grade black hard granite crusher broken stone chips including hoisting and laying having a minimum compressive strength (in work test) of 200 kg/cm sqm in 15cm cubes at 28 days with IS 456 and 516 using 10mm to 20mm size (20mm not to exceed 25%) hard black crusher broken granite stone chips of approved quality and from approved quarry including hoisting lowering laying and compacting concrete watering and curing for 4 weeks including centring shutering and finishing the exposed surfaces smooth with cost, conveyance, royalties and taxes of all materials and labour with T&P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire 18mm to 20mm gauge and labour charges for straightening, cutting, bending, binding etc. of the M.S. rods or Tor steel and binding wire 188 to 20 mm gauge and labour charges for straightening, cutting, bending, binding etc of the M.S rods or Tor steel and binding wire and tying the grills and placing in proper position and as directed by the Engineer-in-charge. COLUMN

RCC work of M 20 Grade with 20mm and down grade black hard granite crusher broken stone chips including hoisting and laying having a minimum compressive strength (in work test) of 200 kg/cm sqm in 15cm cubes at 28 days with IS 456 and 516 using 10mm to 20mm size (20mm not to exceed 25%) hard black crusher broken granite stone chips of approved quality and from approved quarry including hoisting lowering laying and compacting concrete watering and curing for 4 weeks including centring shutering and finishing the exposed surfaces smooth with cost, conveyance, royalties and taxes of all materials and labour with T&P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire 18mm to 20mm gauge and labour charges for straightening, cutting, bending, binding etc. of the M.S. rods or Tor steel and binding wire 188 to 20 mm gauge and labour charges for straightening, cutting, bending, binding etc of the M.S rods or Tor steel and binding wire and tying the grills and placing in proper position and as directed by the Engineer-in-charge. Wall Beam

Fly Ash brick masonary in cement mortar (1;6) using (23xx11x8) cm size brick after immersing brick for six hours in water before use in superstructure having C.S not less than 75 kg/cm2 in foundation and plinth from approved quarry including splays cutting circular moulding and similar such type of work with necessary projections, chambering and corbelling, watering and curing etc. complete including cost and conveyance of all materials with all taxes and royalties and all labour with T&P required for the work etc. complete in all floors and as directed by the Engineer-in-charge.

16 mm. thick cement plaster (1:6) finished smooth to inside smooth surface of brick walls after racking out the joints including watering and curing with the cost and coveyance of all materials and labour with T&P required for the work with all taxes and royalioties etc. complete in all floors. As directed by Enginner-in-charge.