Odisha Lift Irrigation Corporation Limited Tender

Cost of 200mm dia PVC C.S. Casing Pipe of reputed make as per IS-12818/2010 (with latest ammendment ) specification. Manufacturer name should prominently be marked with CIPET test certification in the body of the pipe in indelible ink or stenciled to the satisfaction of Engineer-in-charge

Conducting yield test through pumping for minimum 6-8 hours including supply of required pump set having 3.5 LPS discharge at 70 Mtr. head, 15 KVA D.G. Set and a container of 200 ltrs. Capacity as required to suit the site condition as per the direction of the Engineer-in-charge including supply of tools plants labourers for lowering and lifting the pump set and measuring the yield of the bore well .

Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs (DTH) or combination drilling rigs with PLC facility (1200 cfm/300 psi) as required to suit the site condition as per direction of the Engineer-in-charge including use of own rigs with its accessories, tools, plants and consumables etc. for lowering of 200mm dia PVC Pipes for housing with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (PVC casing pipes if required to prevent collapse of over burden is to be provided by the contract including lowering and withdrawing after completion of the bore well upto 150mtr. )

Conducting VES Test for locating feasible site for drilling of bore well with minimum yield of 1.75 LPS and above (Minimum 3 VES Test are to be conducted for one location) including cost of 20% failed VES Tests and as per direction of the Engineer-in-charge.

50 mm dia C.I. Gate Valve of ISI mark.

FTH SS Nut bolt as per IS specification suitable for fitting of stainless steel threaded Nipple.

Documentation including application form,water sharing aggrement,ayacut map with beneficiary list,photographs (pre installation& post installation), DISTCOM estimate processing fee.

Lowering the casing pipe of 200mm dia with or without slotted pipes as per the necessity from ground level upto 45 meters depth and fitted and fixed up in perfectly vertical position, including cutting, threading and slotted pipe and supply and fixing all jointing materials, tools and plants etc. complete and keeping the top of the casing pipe threaded including plugging the bore well to prevent entry of foreign materials from above 0 to 30 meter and above.

50 mm dia Stainless Steel threaded Nipple of 15 Cm long confirming to lS 1239 ‐ Pt‐II/1992

Disply Board of size 1.80 mtr.x 0.9 mtr. Stating the salient features of cluster bore well projects of letter size 10 cm. X 8 cm. having colour code of navy blue back ground & white lettering made with KB brick masonary in C.M.(1:6) with complete colouring including transportation.

Cost of 3-phase tested energy meter with fibre box including LT pole clamp arrangement and fitting.

32 Amp. Kitkat as per IS specification of reputed brand.

3 core 2.5 sqmm submersible Flat Cable with bunched copper conductor insulated and sheathed with PVC for submersible pump motor with voltage up to 1100 volt confirming to IS 694/1990

LT panel box (fibre with water proofing provision) of size 30cm x 25cm x 15cm with kitkat fitted over bakalite board including pole clamp arrangement.

Coil earthing with No.8 GI wire using required quantity of common salt, charcoal , GI nut bolt including digging the earth pit of size 1.2mtr. X 1.2mtr.x 3mtr. And digging the wire trench and refilling after completion of earthing including supply of all materials trnsportation etc. complete as per the direction of the site Engineer-in-charge. ( 1 SET = 02 Nos)

Construction & erection of 11/0.416 KV, 63 KVA (BIS level-II) D.P.sub-station confirming to RE Rules,1956 mounted on 2.8 Mtr. Long structure, supported in 300 Kg. 9 Mtr. Long PSC pole,transformer mounting channel & top channel made 0f 2.8 Mtr. Long 100x50x6 mm M.S. channel, transformer belting on 2.8 Mtr. long 50 x 50 x 5 mm M.S. Angle(all REC.SPN. Std.F-3) with all accessories like 3 pole 11 KV HG Fuse (F-5) & A.B.Switches(F-9) both mounted on 2.8M long 75x40x6 mm M.S. Channel and supported by 1.0 mtr. long 50x50x5 mm M.S. Angle with 3 nos. 11 KV lightening Arrestors and Distribution box for 25 KVA S/S, Pipe earthing(F-2), including cost of 50 sqmm 3.5 Core PVC cable carping & padding of Poles, Danger board at each Pole, Anti Climbing Devices & all other necessary fittings i.e. FI Pipe Earthing 40 Dia Medium gage 3 mtrs. Long,fixing of stay set with 0.5 Cum cement concret foundation 1:3:6 of required size , L.T.Distribution box including Kit Kat fuse with MCCB (As per DISTCOM specification) 3 1/2 x 35 sqmm. PVC Cable , Barbed Fencing (size 15' x 10') with constn. of retaining wall, erection of RCC fencing post, Sand filling and metal spreading, Fixing of Iron gril gate etc. as per DISTCOM specification .Nuts & Bolts, Brackets, Cable sockets etc. including cost of all materials, labour, transportation complete with liasioning for testing, inspection and commissioning including painting in Navy Blue colour band with inscription of OLIC in each Pole.

Pannel Foundation with KB Brick massonary in cm (1:6) of size 75cm X45cmX 60cm including base concrete of 7.5 cm depth in cm (1:2:4) sand filling, plastering in CM (1:6) curring etc complete as per direction of Engineer in charge.

200mm dia Bore well cap (C.I.) of best quality suitable for borewell

Cost of power capacitor 3KVR of reputed brand.

Cost of 63 mm. dia. HDPE pipe Grade PE- 80 (PN - 6) as per IS-4984 / 1995 (with ammendment 1 to 05).

Cable clip of reputed brand.

Empty pannel board of size ( 110cm x 45 cm x 25cm) made out of 20 gage CR sheet with stand made of MS angle of 20mm size with 4 nos. of legs of 30cm. Size painting in Navy Blue colour with inscription of OLIC

XLPE insulated ( heavy duty ) armoured electric cable of size 3 core x 6 sqmm. with allumium conductor for use in 3 phase system in working voltage up to 1100 volt at 50 HZ confirming to IS 7098 part - I - 1988 & as per the particulars mentioned .

Cleaning and developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the well including suppply and use of all necessary equipment and labour as per the direction of the Engineer-in-charge

Construction & erection of 11/0.416 KV, 100 KVA (BIS level-II) D.P.sub-station confirming to RE Rules,1956 mounted on 2.8 Mtr. Long structure, supported in 300 Kg. 9 Mtr. Long PSC pole,transformer mounting channel & top channel made 0f 2.8 Mtr. Long 100x50x6 mm M.S. channel, transformer belting on 2.8 Mtr. long 50 x 50 x 5 mm M.S. Angle(all REC.SPN. Std.F-3) with all accessories like 3 pole 11 KV HG Fuse (F-5) & A.B.Switches(F-9) both mounted on 2.8M long 75x40x6 mm M.S. Channel and supported by 1.0 mtr. long 50x50x5 mm M.S. Angle with 3 nos. 11 KV lightening Arrestors and Distribution box for 25 KVA S/S, Pipe earthing(F-2), including cost of 50 sqmm 3.5 Core PVC cable carping & padding of Poles, Danger board at each Pole, Anti Climbing Devices & all other necessary fittings i.e. FI Pipe Earthing 40 Dia Medium gage 3 mtrs. Long,fixing of stay set with 0.5 Cum cement concret foundation 1:3:6 of required size , L.T.Distribution box including Kit Kat fuse with MCCB (As per DISTCOM specification) 3 1/2 x 35 sqmm. PVC Cable , Barbed Fencing (size 15' x 10') with constn. of retaining wall, erection of RCC fencing post, Sand filling and metal spreading, Fixing of Iron gril gate etc. as per DISTCOM specification .Nuts & Bolts, Brackets, Cable sockets etc. including cost of all materials, labour, transportation complete with liasioning for testing, inspection and commissioning including painting in Navy Blue colour band with inscription of OLIC in each Pole.

Cost of 200mm dia PVC (Sch.-80) Casing Pipe of reputed make as per ASTM 1785/2004 specification. Manufacturer name should prominently be marked with CIPET test certification in the body of the pipe in indelible ink or stenciled to the satisfaction of Engineer-in-charge.

8 mm Steel Wire Rope with PVC coated best quality suitable for borewell

Transpotation of required PVC C.S./A.S.T.M. Pipe for casing and delivery, S/S Pump set & control pannel with other petty materials etc. from store to work site.

Construction of 3 phase 11 KV line as per REC standard confirming to RE Rules 1956 with 300 Kg. 9 Mtr. Long PSC pole support in 60 Mtr. Span.55sqmm AAA insulated Conductor with double disc arrangement,11KV "V" cross arm with required nos. of 11 KV B & S disc. Insulators and 11KV pin insulators, carping & paddig of poles,danger board at each pole, anticlimbing devices.Stay set at each bending point and double stay at end point with 18mm G.I. H.T. stay, concreting of stay with anchor plate etc. including cost of materials, labour, transportation, inspection & commissioning etc. complete including painting in Navy Blue colour band with inscription of OLIC in each Pole

Construction & erection of 11/0.416 KV, 25 KVA (BIS level-II) D.P.sub-station confirming to RE Rules,1956 mounted on 2.8 Mtr. Long structure, supported in 300 Kg. 9 Mtr. Long PSC pole,transformer mounting channel & top channel made 0f 2.8 Mtr. Long 100x50x6 mm M.S. channel, transformer belting on 2.8 Mtr. long 50 x 50 x 5 mm M.S. Angle(all REC.SPN. Std.F-3) with all accessories like 3 pole 11 KV HG Fuse (F-5) & A.B.Switches(F-9) both mounted on 2.8M long 75x40x6 mm M.S. Channel and supported by 1.0 mtr. long 50x50x5 mm M.S. Angle with 3 nos. 11 KV lightening Arrestors and Distribution box for 25 KVA S/S, Pipe earthing(F-2), including cost of 50 sqmm 3.5 Core PVC cable carping & padding of Poles, Danger board at each Pole, Anti Climbing Devices & all other necessary fittings i.e. FI Pipe Earthing 40 Dia Medium gage 3 mtrs. Long,fixing of stay set with 0.5 Cum cement concret foundation 1:3:6 of required size , L.T.Distribution box including Kit Kat fuse with MCCB (As per DISTCOM specification) 3 1/2 x 35 sqmm. PVC Cable , Barbed Fencing (size 15' x 10') with construction of retaining wall, erection of RCC fencing post, Sand filling and metal spreading, Fixing of Iron gril gate etc. as per DISTCOM specification .Nuts & Bolts, Brackets, Cable sockets etc. including cost of all materials, labour, transportation complete with liasioning for testing, inspection and commissioning including painting in Navy Blue colour band with inscription of OLIC in each Pole.

Installation of submersible pump inside the bore well fitting of HDPE pipe, tying the pump set with wire rope, connecting the supply line and submersible cable with starter, fixing the pannel board completing all the electrical installation, charging the project and making trial run etc. complete. asper the direction of the site Engineer-In-Charge ( Motor & Starter will be supplied by the Department )