Odisha Hydro Power Corporation Limited Tender

Cement concrete (1:3:6) with 40mm size HGCB metal including cost, conveyance, royalty, lead, lift, delift, all labour, T&P, sundries, labour cess and curing etc complete and as per the directions of Engineer-in-Charge.

Random Rubble H.G. stone masonry in cement mortar(1:6) in foundation & plinth including cost , conveyance, royalty, all labour,T&P, sundries, lead, lift, delift, labour cess and curing etc complete and as per the directions of Engineer-in-Charge .

Fabrication and supply of 'Y'- shaped main posts and plain strut posts of M.S-angle 65 x 65 x 5 mm ISA as per design at site of required length with provision of fixing hooks of 8 mm dia HYSD rod of 10 cm long 26 nos per post and bottom to be 'T' shaped with M.S angle 65 x65 x 5 mm ISA at right angle in opposite direction 40 cm long each etc including cutting, bending, shaping, welding of strut with main 'Y' post including cost of all materials, conveyance, all labour , T&P, sundries, fabrication charges, all lead, lift, delift and labour cess etc complete and as per the directions of Engineer-in-Charge.

Main fencing post with 65mm x 65mm x 5mm M.S ISA. ('Y' Post).

Strut post with 65mm x 65mm x 5mm M.S ISA.

Priming one coat with red oxide primer of Asian/ Berger/ Shalimar/ Nerolac make including cost of primer, brush, all labour, T&P, sundries, labour cess etc complete and as per the directions of Engineer-in-Charge.

Painting two coats with any approved enamel paint of Asian/ Berger/Shalimar/ Nerolac make including cost of paint, brush, all labour, T&P, sundries, labour cess etc complete and as per the directions of Engineer-in-Charge.

Cement concrete (1:2:4) for P.C.C works with 12mm size HGCB chips including cost, conveyance , royalty, all labour, T&P, sundries, lead, lift, delift, labour cess and curing etc complete in ground floor and as per the directions of Engineer-in-Charge.

Rigid and smooth centering and shuttering for RCC works including false work and dismantling them after casting including cost of all materials complete including all labour, T&P, sundries, lead, lift, delift and labour cess etc complete and as per the directions of Engineer-in-Charge.

RCC foundation, plinth band and footing bases of cloumns , mass concrete and precast RCC slab etc .

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 metre), having 50 nos rounds per 6 metre length , upto 3.00 mtr height of wall with existing angle iron 'Y' shaped placed 2.40 mtr or 3.00 mtr apart and with 9 horizontal R.B.T reinforced barbed wire, stud tied with G.I staples and G.I clips to retain horizontal, including necessary bolts or G.I barbed wire tied to angle iron, all complete as per direction of Engineer in charge., with reinforced barbed tape (R.B.T) / spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick ) and weight 43.478gm/ metre including all labour, T & P, sundries, cost of concertina coil and all other materials required for the work, scaffolding, lead, lift, delift and labour cess etc complete. ( Cost of M.S angles C.C, blocks shall be paid separately ).

Fencing with angle iron post placed at required distance embeded in cement concrete blocks, every 12 th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonal interwoven with horizontal SRPBT runner strands of concertina coil wire weighing 43.478 gm per mtr (minimum), between the two posts fitted and fixed with G.I staples, turn buckles etc complete including cost, conveyance , all labour, T&P, sundries, lead, lift, delift, labour cess etc complete and as per the directions of Engineer-in-Charge. (Cost of posts ,struts, earth work and concrete work to be paid separately). Payment to be made per metre cost of total length of concertina coil wire used.

Filling in foundation & plinth with excavated materials including all cost of labour, T & P, sundries and labour cess etc complete and as per the directions of Engineer-in-Charge.