Minor Irrigation Department Tender

Earth work in Ordinary soil with all leads, lifts and delifts including dressing and levelling the bed to proper slope and level and making it fit for laying concrete and depositing the excavated materials away from the work site with all leads, lifts, and delifts (with royalty) including dewatering if necessary from foundation complete as directed by Engineer-in-Charge

Earth work in excavation in all kinds of soil with all leads and lifts and delifts etc. complete including rough dressing and breaking clods to maximum 5cm to 7cm in size and laying in layers not exceeding 0.30m in depth to proper slope and profile as per approved design and drawing with all labour and T & P materials required for the item complete in all respect as directed by the Engineer-in-charge(measurement will be taken on finished level section).

Providing fitting and fixing of 12mm thick Bitumenous expansion joint board in expansion joints etc. complete including cost, conveyance, all taxes of all materials and supply of all labour and T & P required as directed by the Engineer-in-Charge.

Clearing shrub jungles including uprooting tank vegetation, grass bushes, shrubs, saplings and trees of girth up to 300mm, removal of stumps of trees cut earlier and disposal of unserviciable material and stacking of serviceable materials including removal & disposal the debris clear outside the periphery with supply of all equipments ,labour T & P for the work and all taxes as per prevailing norm etc. complete as directed by the Engineer-in-Charge.

Excavation of any approved type of soil from borrow area by mechanical means loading into and transportation by transporting vehicles and unloading the soil with all leads, lifts and delifts on properly prepared and scientifically approved surface of dam and cut-off trench including dewatering whenever necessary and spreading and leveling the earth in layers of 15cm thick including re-handling of soils if required removal of all undesirable materials including all organic materials and breaking the clods to maximum 5cm to 7cm size and making ready for watering and rolling with light HRR up to all height of dam or dyke from the stripped surface above down stream filter blanket or cut-off trench as the case may be as per the design, drawing, specification including all leads, lifts, de-lifts & cost of materials, all taxes, royalties, with mobilization and demobilization, supplying , maintenance of all machineries and equipments, with all materials, labour and T & P required for the item including stripping of borrow area, construction, maintenance, watering and lighting of haul and approach roads from borrow area to work site, cost and construction of coffer dam inclusive of supervision charges including illumination of work site when ever required till completion of work in all respect as per the direction of the Engineer-in-charge. (Measurement of the fill to be taken on the finished, compacted, approved level section.)

Fine dressing and turffing the slopes of the canal with approved quality of compact dub grass including collection and supplying the same for approved site, including loading and unloading, conveyance charges royalty and other taxes on all materials, with all leads, lifts and delifts and as per the approved designs, drawings, specifications and including mobilization & demobilization with all incidental charges to complete the item of work and supplying of all machineries and equipments and their running maintenance charges, inclusive of materials and labour and T & P required for the work, including supervision charges, cost of watering and making arrangements for survival of the grass till its full growth etc. complete in all respects as per the direction of the Engineer-in-charge (Measurement will be taken after full survival of growth of grass).

Providing Weep Holes of 100mm dia using A.C./ PVC pipe, fixing with cement mortar including cost, conveyance, royality of all materials & cost of all labour etc complete as per approved Drawing & Technical Specifications and Clause -2706 & 2200 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Filling the gaps of foundation and plinth with excavated earth with all leads and lifts including breaking clods to maximum 5cm.to 7cm.in size and watering and ramming etc. complete in all respect as directed by the Engineer in-charge.

Providing Reinforced Cement Concrete M20 grade for RCC works on approved surface or shape and using 20mm and down graded crusher broken hard granite stone aggregates of approved quality quarried, free from weathered skin surface and other deletorious materials, quarry debris and foreign materials, clean and sharp sand of approved grading and quality confirming to the design specifications including hoisting & lowering to all heights, watering & dewatering, laying the concrete in position to proper slope and level, compacting in layers with vibrators and finishing the exposed surface smooth, curing for required time, providing beads and grooves including cost, conveyance, royalty and other taxes of all materials(excluding the cost of reinforcement), with all cost of tools and plant, cost and carriage of water etc, with supply of all labour and supervision Charges including mobilisation & demobilisation of machineries, T&P with all incidental Charges required for the work complete in all respect as directed by the Engineer-in-Charge.

Providing Cement Concrete M15 grade using 20mm and downgraded crusher broken hard granite stone aggregates of approved quality quarried, free from weathered skin surface and other deletorious materials, quarry debris and foreign materials, using clean and sharp sand of approved grading and quality confirming to the design specifications including hoisting & lowering to all heights, watering & dewatering, laying the concrete in position to proper slope and level, compacting in layers with vibrators and finishing the exposed surface smooth, curing for required time, providing beads and grooves wherever necessary including cost, conveyance, royalty and other taxes of all materials hire and running charges of the machineries, cost and carriage of water etc, with supply of all labour, taxes as per prvailing norm and supervision Charges including mobilisation & de-mobilisation of men & machineries, T&P with all incidental Charges required for the work complete in all respect as directed by the Engineer-in-Charge.

Supplying, straightening ,cutting, bending and binding of uncoated HYSD Steel (manufacturer /Producer approved by Govt. of Odisha) for concrete works and tying the grills as per approved design & drawing and placing in position including cost, conveyance, royalty and other taxes binding wires of 18 to 20 gauge and MS Rods of approved quality including all leads & lifts from bending yard to placement spot with supply of all labour, taxes as per prvailing norm and T&P required for the work etc, complete in all respect as directed by the Engineer-in-Charge. (Weight of the binding wire will not be considered in the measurement for payment)