Institute Of Minerals And Materials Technology Tender

Laying of one number PVC / XLPE insulated armoured and PVC sheathed AL. conductor power cable of 1.1 KV grade armoured cable as approved by dept. Engg. of 3.5 core x 400 sq mm size direct in ground including excavation sand cushioning,protective covering and refilling the trench etc as required.

Laying of one number PVC / XLPE insulated armoured and PVC sheathed AL. conductor power cable of 1.1 KV grade armoured cable as approved by dept. Engg. of 3.5 core x 400 sq mm size in the RCC / Hume / Metal pipe etc. as required.

Laying of one number PVC / XLPE insulated armoured and PVC sheathed AL. conductor power cable of 1.1 KV grade armoured cable as approved by dept. Engg. of 3.5 core x 70 sq mm size in the RCC / Hume / Metal pipe etc. as required.

Laying of one number PVC / XLPE insulated armoured and PVC sheathed AL. conductor power cable of 1.1 KV grade armoured cable as approved by dept. Engg. of 3.5 core x 400 sq mm size in the existing trench / masonary open duct / trench etc. as required.

Laying of one number PVC / XLPE insulated armoured and PVC sheathed AL. conductor power cable of 1.1 KV grade armoured cable as approved by dept. Engg. of 3.5 core x 70 sq mm size in the existing trench / masonary open duct / trench etc. as required.

Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.

Supplying and making end termination with brass compression gland and aluminium lugs for 3.5 core x 400sq mm size of PVC insulated armoured and PVC sheathed /XLPE aluminium conductor cable of 1.1 KV grade as required.

Supplying and making end termination with brass compression gland and aluminium lugs for 3.5 core x 70sq mm size of PVC insulated armoured and PVC sheathed /XLPE aluminium conductor cable of 1.1 KV grade as required.

Supplying of one number PVC / XLPE insulated armoured and PVC sheathed AL. conductor power cable of 1.1 KV grade POLYCAB / Finolex/ KEI make armoured cable as approved by dept. Engg. of 3.5 core x 400 sq mm size as required.

Supplying of one number PVC / XLPE insulated armoured and PVC sheathed AL. conductor power cable of 1.1 KV grade POLYCAB / Finolex/ KEI make armoured cable as approved by dept. Engg. of 3.5 core x 70 sq mm size as required.

Supplying, installation, testing and commissioning of outdoor type, double door floor mounted , cubicle type, compartmentalized electrical panel made out of 2 mm thickness (load bearing section) of metallic sheet steel of tentative panel size 1.2 mtr height & 2.6 mtr width (or as approved), including supplying, installation & internal wiring of following mountings, to be mounted on Cement concrete pedestal complete as required,duly acid treated for derusting, primered and painted with powder coating of approved shade as per drawing approved by engineer in charge. (Manufacturing will be done only in CPRI approved factories) a) Incommer:- Two numbers 400 A, TPN SDF with HRC fuse b) Bus coupler:- One numbers 400 A, TPN SDF with HRC fuse c) Outgoing:- Two numbers of 400 A, 36KA, FPMCCB with rotary handle with thermomagnetic release & terminal spreader. d) Outgoing:- Two numbers of 250 A, 36KA, FPMCCB with rotary handle with thermomagnetic release & terminal spreader. e) Two nos digital Multifunction meter (V, I, KVA, KWH, PF) with round CT (400/5amp) - 6nos , 6A MCB, C-series SP - 6 nos, LED Indicator -6nos. f) Bus-bar chamber comprising four strips (400amp, 100% neutral) copper bus-bar of suitable length mounted on insulator etc as required.

Supplying, installation, testing and commissioning of outdoor type, double door floor mounted , cubicle type, compartmentalized electrical panel made out of 2 mm (load bearing section) thickness of metallic sheet steel of tentative panel size 0.9 mtr height & 0.8 mtr width (or as approved), including supplying, installation & internal wiring of following mountings, to be mounted on on Cement concrete pedestal complete as required,duly acid treated for derusting, primered and painted with powder coating of approved shade as per drawing approved by engineer in charge. (Manufacturing will be done only in CPRI approved factories) a) Incommer 1:- One number 125 A, 36KA, FPMCCB with rotary handle with thermomagnetic release & terminal spreader b) Outgoing:- Three number 100 A, 30KA, FPMCCB with rotary handle with thermomagnetic release & terminal spreader c) Bus-bar chamber comprising four strips in each chamber (125 amp or equivalent , 100% neutral ) copper bus-bar of suitable length mounted on insulator etc as required