East Coast Railway Tender

Cutting Chain Carbide Bit For Bcm As Per Plasser Part No.64.08.2000.33.84 Gl- c, 1) For Scraper Shovel, Intermediate Link, Chain Bolt, Locking Screw and Washer: Rdso Specification: Tm/hm/6/111, Rdso Drg No:tm/9302(revised) 2) Tungsten Carbide Round Shaft Chiesel For Bcm Part No:64.08.2034hm. rdso Specification No:tm/hm/6/435, Rdso Drg No: Rdso/tm/03/19. Make: - plasser Ind Or Its Equivalent Make/brand Performance Warranty For Minimun of 25kms Of Screening. Any Failed Component During Warranty Should be Replaced With In 7 Days At Cost Of Supplier

Set Of Tamping Tools Csm/duo[old] Tctt (one Set Consists Of 1. Rdso Drg. No. Tm/14a/16 - 16nos. 2. Rdso Drg. No. Tm/14b/16 - 04nos. 3. Rdso Drg. No.tm/14c/16 - 04nos. 4. Rdso Drg. No. Tm/14d/16 - 08nos. [total 32 Tools In One Set] Rdso Specification No. Tm/hm/06/320(rev-3 July-2019)

Annual Maintenance Contract For Maintenance Of Hydraulic And Pneumatic Systems (all Systems Except Main Engine And Sli System) Of 140 T Bd Crane Of Sambalpur And Kantabanji For Three Years.

1) Hex Head Bolt For Modified Tamping Tool Size- M20x80, Specification-10.9 Grade hts, Half-thread, Pitch-1.5 Mm, Make-tvs, Lps, Unbrako Or Similar. 2) System pump (sqrs) Simplex Part No. 6192 250 02 00b And Eaton Part No. 3520 Vq 25 A 12 11 Ad20, Make: Simplex, Eaton / Danfoss. (as Per Policy Of Procurement of Spare For Track Machines Attached). (note: - Suppliers Who Have Supplied the Indented Item/similar Item Of Offered Brand/make To Track Machine department Of Any Of Zonal Railway In Last 05 Years With Satisfactory performance Report And One To One Fitment Of Indented Item.) 3) hydraulic Motor As Per Simplex Part No. 6192 250 04 00b And Veljan- denision Part No. M3b-036-in00b1-02-inr, Make: Simplex, Veljan-denision (as Per Policy Of Procurement Of Spare For Track Machines Attached). (note: - suppliers Who Have Supplied The Indented Item/similar Item Of Offered brand/make To Track Machine Department Of Any Of Zonal Railway In last 05 Years With Satisfactory Performance Report And One To One fitment Of Indented Item.)

Set Of Tamping Tools For Csm/duo (tctt-new) Modified Arms. One Set Consists Of 1) Rdso Drg. Nol. Tm/15a/16=08 Nos, 2) Rdso Drg. No. Tm/15b/16=08 Nos,3) Rdso Drg. No. Tm/15c/16=08 Nos 4) Rdso Drg. No.tm/15d/16=08 Nos. [total 32 Tools In One Set] As Per Rdso Specification No.tm/hm/6/320 (rev.3) July 2019.

Rail Surface Friction Meter(tribometer) As Per Attached Rdso Specification No. Is/rdso: Tmm/0001:2023

Screw Self Tapping Round Head, Cone End, To Drawing /specification Is:5957/2003(2nd Rev)/ Iso 1478 - St 4,8 ; Length - 19 Mm.

Supply Of Set Of Ss Hex Head Bolt With Spring Washer

Snubber Spring For Casnub Bogie Boxn [20.3 T Axle Load], To Drawing / specification Rdso/wd-83069-s-01, Alt. No.15, Item No-3.

Screw Self Tapping Round Head, Cone End, To Drawing / Specification Is:5957/2003(2nd Rev)/ Iso 1478 - St 4,2 ; Length - 13 Mm.

One Time Provision Of Additional Dirt Collectors In Bp Line Before Fiba Device In All Lhb Coaches Of Coaching Depot, Bhubaneswar, As Per Drawing No. M1007796, Alt. Nil.

Bogie And Pull Rod Boxn

Control Rod With Head Complete For Bobrn Wagons, To Drawing / Specification Rdso Wd-90002-s-02 Rc, Alt. No. 1, Items -2,3,5 And 6.

M.s.hex Head Bolt M12 X 30 Mm (without Nut), To Drawing / Specification Is:1363 (part-1) 2002.

Unsintered Poly Tetra Fluoro Ethylene (ptfe) Tape For Thread Sealing Application, Size: 25 Mm Width X 12 Mtrs Length, To Drawing / Specification Is:14643/99 (reaffirmed-2020).

Covering Screw.

Health Faucet 1/2 Inch With 1.5 Mts.

Supply, Erection & Commissioning Of Pillar Mounted Jib Crane Capacity 5 Ton. Spec: - Boom Length 18 Ft. 180-degree Rotation, Column/wall Pillar Post Mounted Pivot Bracket Type Supported By Pivot Housing With Supporting Tie, Power Driven Trolly, Height Of Lift-20 Ft. Is:807 & Is:15419.

Filter Element As Per Schunk Part No.909010008700 And Drawing No.af30p-060s For Wbl-85-hr Pantograph Make - Schunk.

Screw Self Tapping Round Head, Cone End, To Drawing / Specification Is:5957/2003(2nd Rev)/ Iso 1478 - St 4,8 ; Length - 38 Mm.