Directorate Of Ports And Inland Water Transport Tender
... More
The PIWT has issued a formal invitation for competitive bids for the Directorate Of Ports And Inland Water Transport project, for Construction Of Swimming Pool At Crew Training Institute -campus-i, Chandbali In Bhadrak District in Bhadrak, Odisha, with an estimated contract value of Rs. 3,50,31,265. The bid opening date for this tender is 04-03-2025 and the last date for bid submission is 25-03-2025. Interested bidders for Directorate Of Ports And Inland Water Transport tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Directorate Of Ports And Inland Water Transport - PIWT Tender
Opening Date4 Mar 2025
Closing Date25 Mar 2025
Tender Amount₹ 3,50,31,265
Technical
Technical
Financial
Additional Eligibility
Class Of Bidder
... View More
The class eligibility requirement to bid or participate in this tender is 'A' Class contractors registered with the State Government and contractors of equivalent Grade/Class registered with Central Government/MES/Railways for execution of Civil works, which can also be referred to as Super Class / Special Class / 'A' Class Contractors.
Technical Capacity
... View More
The required prior work experience for the bidder includes a list of projects under progress and executed that are similar in nature to the work. Specifically, the bidder needs to provide information about the projects executed, including details such as name of employer, location and name of work, contract price, major items of works, and dates of starting and completion of the work. The bidder should have satisfactorily completed at least 1/3 of the estimated amount put to tender, which is Rs.1,16,77,000.00, in a single contract as similar nature of work in any one financial year during the last five years. This similar nature of work includes construction of Swimming Pool / Civil works / buildings inclusive of Electrical & PH works. Additionally, the bidder should have achieved a minimum Annual financial turnover of 60% of the amount put to bid, which is Rs. 2,10,20,000.00 at 2023-24 price level, in any one financial year during the last five years. The bidder should also have executed in any one year a minimum of 500 Cum of Earth Work and 250 Cum of Cement Concrete. The bidder is required to submit attested copy of authentic record duly certificated by the concerned Executive Engineer in support of such experience. The available bid capacity will be calculated based on the maximum value of works executed in any one year during the last five years, updated to the current price level using an escalation factor of 10% per year. The percentage of similar works completed is 1/3 (one-third) of the estimated amount put to tender, and the annual financial turnover should be at least 60% of the amount put to bid. The amount of similar works completed is Rs.1,16,77,000.00, and the annual financial turnover is Rs. 2,10,20,000.00 at 2023-24 price level.
Costs
EMD
₹ 3,51,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_PIWT_111287_1Bid Award Id
ViewTender No
DPIWT-13/2024-25Tender Authority
Directorate Of Ports And Inland Water Transport ViewPurchaser Address
-Website
http://http://ct.odisha.gov.in/content/1/7
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Suction Inlet: Suction inlet in ABS with cap internal thread of 11/2" dia and external thread 2" including all labour, labour cess, materials, taxes & T&P etc. required to complete the work as per specification & direction of Engineer-in-Charge.
6
1500
9000
... More
Supply of 48mm x 48mm porcelain Tile
297.4
1936
576004.32
... More
Supplying all materials, labour, labour cess, T&P and fixing of vitreous china Wash Down Water Closet(European type W.C. pan)with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
3
3147
9443.7
... More
Deep Net: Supplying of Deep Bag Leaf Net - Shark Series including all labour, labour cess, materials, taxes & T&P etc. required to complete the work as per specification & direction of Engineer-in-Charge.
1
1500
1500
... More
Supplying of 110mm U-PVC door bend with labour, labour cess, T&P and fitting and fixing Pipe soil waste ventilating pipes and fittings conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials etc. all complete as per specification and direction of the Engineer-in-charge.
10
264
2642
... More
Providing 12 mm thick cement plaster in cement mortar (1:4) including racking out joints, scraping and cleaning the surface and finishing the plastered surface smooth using wooden floats with proper plumbs and level including the cost of all materials, labour, conveyance, taxes, loading and unloading, labour cess, royalties, scaffolding, watering and curing, T&P etc. complete as per direction of the Engineer-in-charge.
402.87
223
90041.45
... More
Bolts and Nuts 110mm dia including all labour, labour cess, materials, taxes & T&P etc. required to complete the work as per specification & direction of Engineer-in-Charge.
40
120
4800
... More
Providing, lifting, hoisting and laying in Position Reinforced Cement Concrete of M-30 grade in R.C.C. Roof Slab including cost of Centering and shuttering using 20mm and down grade size black hard granite (Crusher Broken) chips of approved quality from approved quary including the cost of all materials, cost of all labour, conveyance, taxes, T&P, royalty, labour cess, all complete as per the direction of Engineer-in-charge (but excluding the cost of steel reinforcement).
167.06
755
126130.3
... More
Supplying,fitting &fixing Ceramic Wall tiles (0.20x0.30 / 0.20x0.20) cm in walls,skirting and risers of step on 12mm thick bed of cement mortar (1:3) jointed with neat cement slurry mixed with pigment to match the shade of the tilesincluding cost, conveyance, taxes, cost of all labour, labour cess, etc. as per the direction of Engineer-in-Charge.
82.5
1015
83803.5
... More
Providing & laying Granite Stone (above 0.40 Sqm) Flooring in Floors and Landing using 20 mm thick Granite Stone Slab of approved quality, colour and size above 0.4 Sqm as per IS 14223 laid over an under layer of 20 mm thick cement mortar (1:4) (1 cement: 4 coarse sand) confirming to IS-1443 including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces with oxlaic acid, machine grinding, mirror polishing including the cost of all materials, cost of all labour, labour cess, conveyance, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge.
27.6
2841
78422.64
... More
Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing (0.90 mtr height) using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90 mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, labour cess T&P etc.as per the direction of Engineer-in-charge.
25.7
3589
92252.72
... More
Group C
20
1121
22434
... More
Supplying and making end termination with brass double compression gland and aluminium lugs for 3.5 core x 50 sq mm brass double compression gland and aluminium lugs size cable as per direction of Engineer-in-charge.
2
385
771.2
... More
Providing, lifting, hoisting and laying in Position Reinforced Cement Concrete of M-30 grade in R.C.C. Lintels including cost of Centering and shuttering using 20mm and down grade size black hard granite (Crusher Broken) chips of approved quality from approved quary including the cost of all materials, cost of all labour, conveyance, taxes, T&P, royalty, labour cess, all complete as per the direction of Engineer-in-charge (but excluding the cost of steel reinforcement).
0.81
16152
13083.36
... More
Factory made Solid WPC door frame of size 90mmx45mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments including all materials, labour, labour cess, T&P etc. required to complete the work in all respect as per direction of Enginner-in-charge.
36.72
1114
40917.1
... More
Filtration Sysytem
-
-
-
... More
Supply of following materials and labour for tile fixing in swimming pool including all labour, labour cess, materials, taxes & T&P etc. required to complete the work as per specification & direction of Engineer-in-Charge.
-
-
-
... More
Floating Hose: Supplying of Vacuum Hose 38mm- 2" 15m including all labour, labour cess, materials, taxes & T&P etc. required to complete the work as per specification & direction of Engineer-in-Charge.
1
9000
9000
... More
Transfromer: Supplying of low voltage underwater lighting transformer with internal thermal switch & auto reset. 200W/ 12 V. IP65 Protection including all labour, labour cess, materials, taxes & T&P etc. required to complete the work as per specification & direction of Engineer-in-Charge.
4
6000
24000
... More
Supplying , fixing & Hoisting of 2000 litre capacity Triple Layer Rotational moulded polyethylene cylindrical vertical water storage tanks (WHITE) conforming to 1S:12701--1996 including cutting holes through the tank and Supplying & fixing mild steel tubes and fittings and providing extra sockets and jam nuts, Supplying & fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position including all labour, labour cess, etc. complete as per specification and direction of the Enqineer-in-charge.
2
27630
55261
... More
Supplying all materials, labour, labour cess, T&P and providing and fixing porcelain glazed tiles (0.30x0.30 to 0.40x0.40 )cm in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.
97.99
1076
105525.43
... More
Supplying all materials, labour, labour cess, T&P and laying in trenches (to level or slope) 160mm dia unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge.
12
1128
13538.4
... More
Supplying all materials, labour, labour cess, T&P and providing and fixing Vitrified tiles (600mm x 600mm) in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charg.
19.29
1349
26029.93
... More
Supply of Adhessive T06 (In Bag)
50
1050
52500
... More
Providing and fixing of 40mm dia Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints including all labour, labour cess, material, taxes etc. complete as per direction of Engineer-in-Charge.
45
783
35253
... More
Providing & applying of pre constructional anti-termite treatment by drilling 12mm dia holes at distance of 30cm in both ways injecting chemical with water in propertion (1:20) or any approved propertion in floor and plinth & junction of wall & floor about 300mm apart deep enough to reach the soil below & chemical emulsion (PREMISE, IMIDACHLOPRIED 30.5SC OF BAYER MAKE mixed with 47.5ltr water) pumped these holes to soak the soil @ 1 ltr solution of each hole as per manufactures specification & the holes should be pluged the filling materials including cost of all materials, labour, labour cess, conveyance, T&P , all taxes and hire charges of machinaries as per direction of Engineer-in-charge.
233.31
130
30470.29
... More
Providing, lifting, hoisting and laying in Position Reinforced Cement Concrete of M-30 grade in R.C.C. Columns & Beams including cost of Centering and shuttering using 20mm and down grade size black hard granite (Crusher Broken) chips of approved quality from approved quary including the cost of all materials, cost of all labour, conveyance, taxes, T&P, royalty, labour cess, all complete as per the direction of Engineer-in-charge (but excluding the cost of steel reinforcement).
125.77
17682
2223915.45
... More
Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm 1700 cmh air delivery with louvers of exhaust fan in the existing wall, including fixing & conntection complete etc.as required and as per the direction of E.I.C..(Make-USHA (Model.Turbo HDEF 1400 RPM ISI)/Eq. model of /Havells/ ALmonrad/ Crompton
4
3447
13789.2
... More
LIGHTS: Supply of LED Wall Mounted underwater pool light 18W-12V with SS Facia Ring- Warm white including all labour, labour cess, materials, taxes & T&P etc. required to complete the work as per specification & direction of Engineer-in-Charge.
24
18000
432000
... More
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. as per direction of Engg.-in-Charge.
15
993
14896.5
... More
2 x 4.0 sq.mm. + 1 x 1.5 sq.mm.
80
188
15072
... More
Supplying all materials, labour, labour cess, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge.
16
348
5582.4
... More
Inlets: Floor Inlet in ABS including all labour, labour cess, materials, taxes & T&P etc. required to complete the work as per specification & direction of Engineer-in-Charge.
20
1500
30000
... More
Supplying all materials, labour, labour cess, T&P and fixing mirror (600mmx450mm size Bevelled Edge mirror) of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.
4
904
3616.8
... More
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, taxes etc all complete as per direction of the Engineer-in-charge.
30
263
7890
... More
Providing Fly-Ash Brick masonry work in Foundation & Plinth using Fly-Ash Bricks of size 250mm x 120mm x80mm having crushing strength not less than 75Kg/Sqcm in cement mortar (1:6) including the cost of all materials, cost of labour, conveyance, taxes, loading, unloading, royalties, labour cess, scaffolding, curing for required period, T&P, etc. all complete as per the direction of the Engineer-in-charge.
106.71
6276
669808
... More
Supply installation of Danger Board including labour, labour ccess, etc. complete as per direction of Eng-in-charge.
1
120
120
... More
Water Proofing
-
-
-
... More
4 Sq mm Three core cable
100
108
10860
... More
Constructing Septic Tank (inside size 2.00m x 1.00m and 1.50m deep) with 15 cm thick R.C.C top slab in (1:2:4) mix having 10mm dia Tor steel @ 10cm C/C both way, foundation 20cm thick cement concrete (1:4:8), inside plaster 12mm thick with cement mortar (1 :3) finished with neat cement punning, 12mm thick outside cement plaster (1:3), 25cm thick brick work with Fly Ash bricks having crushing strength not less than 75kg/cm2 with dimensional tolerance ± 8 percent in cement mortar (1:4), cement concrete (1:2:4) finished smooth using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber complete as per specification. and direction of Engineer-in-Charge.
1
39782
39782.6
... More
Providing and laying Plain Cement Concrete of proportion (1:3:6) using 4 cm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including the cost of all materials, cost of labour, conveyance, taxes, royalties, curing, labour cess, T&P, etc. all complete as per the direction of Engineer-in-charge.
93.26
8349
778683.7
... More
Supplying all materials, labour T&P and fitting and fixing of 20mm dia CP consealed stop cock of approved quality with supply of all joiniting materials including cost & conveyance of all materials, all labour, labour cess, taxes, & T&P etc. all complete as per specification and direction of the Engineer-in-charge.
8
1130
9047.2
... More
Supply delivery, installation, testing & commissioning of 200 w High Efficent LED bay light Made of Pressure Die Cast Alumuinium Housing suitable Lens & Toughened glass ip66 HALONIX Make:HLBLD-ML54-200-CWL-R MAKE: WIPRO/HALONIX/PHILIPS/BAJAJ
16
18529
296470.4
... More
Test kit: Supplying ofTest kit for free chlorine & pH including all labour, labour cess, materials, taxes & T&P etc. required to complete the work as per specification & direction of Engineer-in-Charge.
1
900
900
... More
Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finish structural foam panel of 29mm thickness and a density of 650kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter including all materials, labour, labour cess, T&P etc. required to complete the work in all respect as per direction of Enginner-in-charge.
16.14
3430
55369.88
... More
PLUMBING SYSTEM: Supply & fixing of following control and regulatory valves
-
-
-
... More
Providing, lifting, hoisting and laying in Position Reinforced Cement Concrete of M-30 grade in R.C.C. Stair Case including cost of Centering and shuttering using 20mm and down grade size black hard granite (Crusher Broken) chips of approved quality from approved quary including the cost of all materials, cost of all labour, conveyance, taxes, T&P, royalty, labour cess, all complete as per the direction of Engineer-in-charge (but excluding the cost of steel reinforcement).
1.66
17557
29146.11
... More
Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI with 20 mm dia HMS FRLS PVC conduit ISI marked Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal 6A modular type ( flame retradant type) switch ISI marked Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) ( flame retradant type) Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. . All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.
-
-
-
... More
Providing, fiting and fixing of 16mm thick kota stone flooring using kota stone of approved quality, colour and size above 0.10 sqm in floors over an under layer of 20 mm thick cement mortar (1:4) (1 cement: 4 coarse sand) confirming to IS-1443/1972 including cutting to size, laying and joining with white cement slurry and colouring pigment to match the shade, machine grinding, cleaning with oxalic acid, mirror polishing the surface including cost of all labour, labour cess materials, taxes, royalties, loading and unloading, conveyance, sundries, watering and curing, etc. complete as per the direction of the Engineer-in-Charge.
17.96
999
17943.84
... More
PH
-
-
-
... More
Constructing Soak pit (inside 1.5 m dia and 1.50m deep) with 15 cm thick R.C.C top slab in (1:2:4) mix having 10mm dia Tor steel @ 10cm C/C both way, foundation 20cm thick cement concrete (1:4:8), 23cm thick brick work with Fly ash bricks having crushing strength not less than 75kg/cm2 with dimensional tolerance ± 8 percent in cement mortar (1:4), earthwork in excavation in all kinds of soil and refilling the cavity around the chamber complete as per specification. and direction of Engineer-in-Charge.
1
43135
43135.1
... More
Bolts and Nuts 110mm dia including all labour, labour cess, materials, taxes & T&P etc. required to complete the work as per specification & direction of Engineer-in-Charge.
80
120
9600
... More
Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series,10KA breaking capacity, single poles MCB of Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9. the existing MCB DB complete with connections as per direction of Engg.-in-Charge. .Warranty on MCB is 3 years.
10
207
2073
... More
Providing, lifting, hoisting and laying in Position Reinforced Cement Concrete of M-30 grade in R.C.C. Floor and Roof Slab, Landing, Balconies including cost of Centering and shuttering using 20mm and down grade size black hard granite (Crusher Broken) chips of approved quality from approved quary including the cost of all materials, cost of all labour, conveyance, taxes, T&P, royalty, labour cess, all complete as per the direction of Engineer-in-charge (but excluding the cost of steel reinforcement).
31.35
15718
492762.44
... More
Supplying, fabricating and fixing of structural steel work using MS/GI sections such as GI angle, flat, channel, square bar, plate, etc. including cutting, bending, welding, hoisting and fixing in position including cost, conveyance,taxes of materials, labour, labour cess, T&P, etc. complete as per the direction of Engineer-in-charge.
86114.63
120
10333755.6
... More
Flange and adaptor for 110 mm including all labour, labour cess, materials, taxes & T&P etc. required to complete the work as per specification & direction of Engineer-in-Charge.
20
1200
24000
... More
Providing 16 mm thick cement plaster in cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plastered surface smooth using wooden floats with proper plumbs and level including the cost of all materials, labour, conveyance, taxes, loading and unloading, labour cess, royalties, scaffolding, watering and curing, T&P etc. complete as per direction of the Engineer-in-charge.
241.08
287
69382.82
... More
Supplying all materials, labour T&P and fitting and fixing of 25mm dia brass full way valve of approved quality with supply of all joiniting materials including cost & conveyance of all materials, all labour, labour cess, taxes, & T&P etc. all complete as per specification and direction of the Engineer-in-charge.
4
1286
5147.6
... More
Providing Fly-Ash Brick masonry work in Superstructure using Fly-Ash Bricks of size 250mm x 120mm x80mm having crushing strength not less than 75Kg/Sqcm in cement mortar (1:6) including the cost of all materials, cost of labour, conveyance, taxes, loading, unloading, royalties, labour cess, scaffolding, curing for required period, T&P, etc. all complete as per the direction of the Engineer-in-charge.
65.77
6310
415028.43
... More
Providing 6 mm thick cement plaster in cement mortar of (1:4) to RCC work including roughening, scraping, cleaning and finishing the plastered surface smooth using wooden floats with proper plumbs and level including the cost of all materials, cost of labour, labour cess, conveyance, loading and unloading, all taxes and royalties, scaffolding, watering and curing , sundries, T&P etc. complete as per direction of the Engineer-in-charge.
212.85
207
44059.95
... More
Submains:Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.
-
-
-
... More
Supplying and fixing 63 Amps rating,C series,10KA breaking capacity, 4P, 415 volts, RCCB 30mA . Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. . The MCB should be Replacement Warranty will be 3 years.
1
1808
1808.6
... More
Supply, laying & connecting with panel board of following size cable including all labour, labour cess, materials, taxes & T&P etc. required to complete the work as per specification & direction of Engineer-in-Charge.
-
-
-
... More
Wall Conduit: Supply & fixing of ABS wall conduits 300mm long including all labour, labour cess, materials, taxes & T&P etc. required to complete the work as per specification & direction of Engineer-in-Charge.
6
1200
7200
... More
Grade 1. Size 0.5 mm - 1.0 mm (in Bag)
80
900
72000
... More
supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, taxes, labour, labour cess etc. all complete as per direction of Engineer-in-charge.
47
65
3078.5
... More
GRATINGS: Supply & fixing of following accessories
-
-
-
... More
Providing & Painting with two coats of Plastic emulsion paint of approved quality, make and shade to give an even surface including the cost of all materials, labour, labour cess conveyance, taxes, loading, unloading, scaffolding, T&P, etc. all complete as per specification and direction of the Engineer-in-Charge.
453.93
107
48842.87
... More
63 mm dia PVC pipe 10 Kg/Sqcm
300
210
63000
... More
Supplying of 110mm U-PVC D/Jn door with labour, labour cess, T&P and fitting and fixing Pipe soil waste ventilating pipes and fittings conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials etc. all complete as per specification and direction of the Engineer-in-charge.
4
393
1575.2
... More
Supplying, fitting and fixing Vitrified Tile in floors of size 600mm x 600mm (Plain/Ivory) of approved make confirming to IS:13755 laid on 20mm thick cement mortar (1:4) (1 cement : 4 Course Sand) and filling joints with white cement of approved quality including cost, conveyance, taxes, cost of all labour, labour cess, etc. as per the direction of Engineer-in-Charge.
521.41
1174
612291.76
... More
Supplying all materials, labour, labour cess, T&P and fixing standard sized CP towel rail (25mmx600mm) complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge.
8
1072
8577.6
... More
Providing and fixing of 32mm dia Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints including all labour, labour cess, material, taxes etc. complete as per direction of Engineer-in-Charge.
40
581
23276
... More
Supplying all materials, labour T&P and fitting and fixing of 15mm dia CP two in one bib cock of approved quality with supply of all joiniting materials including cost & conveyance of all materials, all labour, labour cess, taxes, & T&P etc. all complete as per specification and direction of the Engineer-in-charge.
3
1235
3706.5
... More
Supply delivery, installation, testing & commissioning of 70 w Highly efficient Integral type LED flood light made of pressure die cast aluminium housing withLED FLOOD LIGHT lens, toughened glass and with efficacy of 120lm/W, IP66 Halonix Make:HLFLD-ML17-70-CWL-HL2-PMAKE: WIPRO/HALONIX/PHILIPS/BAJAJ
15
4740
71101.5
... More
Priming over the plastered surface with one coat of water bound cement primer of approved quality and make including the cost of all materials, labour, labour cess, conveyance, taxes, loading, unloading, scaffolding, T&P, etc. all complete as per the direction of engineer-in-charge.
856.8
72
61689.6
... More
Supply and fixing of first aid box with medicines complete with medicine with three years expiry date to be fixed in Electrical control panel room as per direction of Engg.-in-Charge.
1
1500
1500
... More
Supplying all materials, labour T&P and fitting and fixing of 15 mm dia CP Short Body Bib cock of approved quality with supply of all joiniting materials including cost & conveyance of all materials, all labour, labour cess, taxes, & T&P etc. all complete as per specification and direction of the Engineer-in-charge.
1
914
914
... More
Telescopic Handle: Supplying of Telescopic Pole 3m x 3 pieces including all labour, labour cess, materials, taxes & T&P etc. required to complete the work as per specification & direction of Engineer-in-Charge.
1
4200
4200
... More
Finishing the wall surface with Acrylic wall putty (water based) of approved make and finishing smooth even surface to receive painting including the cost of all materials, labour, labour cess, conveyance, taxes, T&P and materials etc complete and as per specification and direction of the Engineer-in-Charge.
453.93
91
41489.2
... More
Providing and fixing of 25mm dia Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints including all labour, labour cess, material, taxes etc. complete as per direction of Engineer-in-Charge.
25
404
10112.5
... More
Filling in Foundation, Plinth and low laying area with available excavated materials with cost of all labour, T&P, labour cess etc complete including watering and ramming as directed by the Engineer-in-charge.
394.83
134
53104.64
... More
Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, labour cess, T&P, etc., all complete as per the specification and direction of Engineer-In-Charge.
762.48
1639
1250314.7
... More
Providing, lifting, hoisting and laying in Position Reinforced Cement Concrete of M-30 grade in R.C.C. Foundation and Footing Bases of Columns Mass Concrete including cost of Centering and shuttering using 20mm and down grade size black hard granite (Crusher Broken) chips of approved quality from approved quary including the cost of all materials, cost of all labour, conveyance, taxes, T&P, royalty, labour cess, all complete as per the direction of Engineer-in-charge (but excluding the cost of steel reinforcement).
152.37
8539
1301133.14
... More
Supplying all materials, labour, labour cess, T&P and fixing wash basins (550x400x200mm) with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge.
4
4205
16821.6
... More
Supplying,installation,testing & commissioning Of Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (WITH charcoal and salt) as required as per direction of Engg.-in-Charge. The entire earthing system should be Replacement Warranty will be 2 years
1
11784
11784.8
... More
Supplying all materials, labour, labour cess, T&P and laying in trenches (to level or slope) 110mm dia unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge.
12
578
6943.2
... More
POOL BASIN EQUIPMENT: Supply and fixing of following accessories
-
-
-
... More
Supply & fixing of Chemical Storage Tanks of Semi transparent polyethelene tank with external scale so that levels can be checked easily, capacity of tank 500lts including all labour, labour cess, materials, taxes & T&P etc. required to complete the work as per specification & direction of Engineer-in-Charge.
2
24000
48000
... More
Supplying, fitting and fixing of G.I.doors/windows/grill gate made out of square bars, angle, channel, flat, plate, Hollow Pipes, etc with cost of all materials, labour, labour cess, conveyance, taxes, loading, unloading, T&P, etc. all complete as per the direction of Engineer-in-Charge.
14.09
10514
148153.53
... More
Providing, lifting, hoisting and laying in Position Reinforced Cement Concrete of M-30 grade in R.C.C.Lintel including cost of Centering and shuttering using 20mm and down grade size black hard granite (Crusher Broken) chips of approved quality from approved quary including the cost of all materials, cost of all labour, conveyance, taxes, T&P, royalty, labour cess, all complete as per the direction of Engineer-in-charge (but excluding the cost of steel reinforcement).
6.72
570
3832.42
... More
Water Proofing/ Surface Treatment: The cleaning and preparation of the substrate to which the waterproofing system is applied must be carried out thoroughly to leave a sound base for the application. Any laitance present on the surface must be removed mechanically. Grinding the unsound and undulated concrete surface to make it a fairly smooth surface. Surface defects exposed during surface preparation such as shrinkage cracks, minor honey combing, minor damage to joint arises, and etc. shall be filled with polymer mortar (cement, sand, Latex) (1:4:0.2). Note: Wider patches if any shall be treated with Smart Care Repair Mortar (Patch Repair Mortar)
Coving: Providing and applying coving at each horizontal and vertical joint by polymer modified cement mortar as per manufacturer direction. Waterproofing system by Polyurethane: Providing and applying of 1mm thick Pitch free pure polyurethane having solid content more than 80% with elongation 500% on the prepared and primed surface as per manufacturer direction and specification including all labour, labour cess, materials, taxes & T&P etc. required to complete the work as per direction of Engineer-in-Charge.
662
798
528276
... More
Providing and Painting two coats of synthetic enamel paint of approved quality, make and shade on Iron / Wood Works including the cost of sand papering, surface polishing, cost of all materials, cost of labour, labour cess, conveyance, taxes, loading, unloading, scaffolding, T&P, etc. as per direction of Engineer-in-charge.
1108.34
186
206151.24
... More
RECIRCULATION PUMP
-
-
-
... More
Supplying all materials, labour, labour cess, T&P and fixing standard sized glass-shelf (600mmx125mm) with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.
4
790
3160.4
... More
TOTALLY ANTI-CORROSIVE Bobbin Wound filter,PRAGA model 1200mm diameter. Fitted with pressure gauge panel manual air bleeder, water drain and emptying plug. fitted with collector arms and diffuser made from unplasticized PVC and polypropelene with all accessories required. Filtration velocity 40m³/hr/m². Max. working pressure : 2.5 kg/cm². Flow rate = 56m³/hr including all labour, labour cess, materials, taxes & T&P etc. required to complete the work as per specification & direction of Engineer-in-Charge.
2
240000
480000
... More
Supplying, fitting and fixing of Poly Carbonate Sheet using self tapping screw with cost of all materials, labour, labour cess, conveyance, taxes, loading, unloading, T&P, etc. all complete as per the direction of Engineer-in-Charge.
683.2
4088
2793468.16
... More
Supplying of 110mm U-PVC S/Jn door with labour, labour cess, T&P and fitting and fixing Pipe soil waste ventilating pipes and fittings conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials etc. all complete as per specification and direction of the Engineer-in-charge.
6
323
1942.2
... More
Supplying and fixing W.I. clamps 33cm to 38Cm long of 35mm × 5mm size for doors, windows and ventilators including fixing in cement concrete (1:3:6) with 12mm, to 20mm hard stone chips or in cement mortar (1:3) including cost of all materials, labour, labour cess, conveyance, taxes, T&P etc. complete as per direction of Engineer-in-charge.
60
28
1704
... More
Supply and fixing of modular metal box on surface or recess with suitable size of modular cover in front including providing an fixing of ISI marked 16Amp modular plug with switch with all conection. on surface or recess including all conection as per direction of E.I.C. All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.(Make :Legrand(Myrius)/Schnider(Zencelo)//PANASONIC(VISION)
5
669
3346.5
... More
Deck Box: Supplying of ABS deck box for connecting the cables between the U/W light and transformer. IP68 protection. ( 3/4" Threaded inlet & 1/2" gland connection x 2/4 nos) including all labour, labour cess, materials, taxes & T&P etc. required to complete the work as per specification & direction of Engineer-in-Charge.
24
1200
28800
... More
Providing, lifting, hoisting and laying in Position Reinforced Cement Concrete of M-30 grade in R.C.C. Stair Case including cost of Centering and shuttering using 20mm and down grade size black hard granite (Crusher Broken) chips of approved quality from approved quary including the cost of all materials, cost of all labour, conveyance, taxes, T&P, royalty, labour cess, all complete as per the direction of Engineer-in-charge (but excluding the cost of steel reinforcement).
6.38
1043
6656.25
... More
Flange and adaptor for 110 mm including all labour, labour cess, materials, taxes & T&P etc. required to complete the work as per specification & direction of Engineer-in-Charge.
10
1200
12000
... More
Overflow Gratings: Made in white, U.V. Stabilized PP. Running Length : 154 m. Width: 295 mm, Height : 22mm including all labour, labour cess, materials, taxes & T&P etc. required to complete the work as per specification & direction of Engineer-in-Charge.
60
1800
108000
... More
Supplying, laying & testing of 3.5 core x 50 sq mm Aluminium armoured Cable of PVC insulated XLPE shethed / strip armoured aluminium / Copper conductor power cables of 1100 volt grade laid directly unground with sand cushioning, brick protection, clamped on surface of the walss / columns / existing RCC / inside masonry cable trenches / on the cable tray /throuth G.I Pipes / hume pipes / PVC pipes as the case may be, including cost of shaddles/ clamps/ markers etc but excluding the cost of G.I. Pipes / Hume pipes cpmplete with making good to the damages as required and as per direction of Engineer-in-charge. MAKE: FINOLEX/ KEI/ POLYCAB/HAVELLS/RR CABLE (FOR FLOOR PANEL)
50
700
35020
... More
Group B
20
748
14978
... More
UNDERWATER LIGHTS (Main Pool + Kids Pool): Supply & fixing of following accessories
-
-
-
... More
Supply of Complete Electrical Panel with CRCA sheet with 16 gauge with VAF meter. Dol Starter for recirculation pumps ( 03 nos.), MCB for Dosing Pump ( 02 nos.), MCB for Underwater light ( 24 nos.) RCCB , Phase preventer , Phase indicator Lamps including all labour, labour cess, materials, taxes & T&P etc. required to complete the work as per specification & direction of Engineer-in-Charge.
1
100000
100000
... More
Supply installation of 33kV 3mm thick Class-C Rubber Mat (Size-10mx1m) as per IS-15652 and complete as per direction of Eng-in-charge.
12
822
9864
... More
Rigid smooth centering and shuttering for R.C.C. works including false works and dismentalling then after casting including cost, conveyance, royality, labour, Labour Cess, T&P and all other taxes etc. required to complete the work in all respect as per specification and direction of the Engineer in charge. (R.C.C. Column & Beam, grider and bressmer etc.
822.63
1189
978353.86
... More
Supplying all materials, labour T&P and fitting and fixing of 15mm CP Extension piece of approved quality with supply of all joiniting materials including cost & conveyance of all materials, all labour, labour cess, taxes, & T&P etc. all complete as per specification and direction of the Engineer-in-charge.
35
170
5964
... More
Butterfly Valve dia 110 mm including all labour, labour cess, materials, taxes & T&P etc. required to complete the work as per specification & direction of Engineer-in-Charge.
10
4200
42000
... More
Supplying all materials, labour, labour cess, T&P and fixing vitreous china water closet, (580mm size Orissa pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
1
3858
3858.8
... More
Supplying and fixing 40 Amps rating,C series,10KA breaking capacity, 4P, 415 volts, RCCB 30mA . Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. . The MCB should be Replacement Warranty will be 3 years.
3
2315
6947.7
... More
Supplying all materials, labour T&P and fitting and fixing of 40mm dia brass full way valve of approved quality with supply of all joiniting materials including cost & conveyance of all materials, all labour, labour cess, taxes, & T&P etc. all complete as per specification and direction of the Engineer-in-charge.
2
3082
6164.2
... More
Valve Battery Manifold made in PVC with flanges for connecting to filters as per DIN 2501 standards. Consists of set of 5 - buttterfly valves for carrying out filtration, back-washing, rinsing and shut down of the filters. Size : 160mm including all labour, labour cess, materials, taxes & T&P etc. required to complete the work as per specification & direction of Engineer-in-Charge.
2
150000
300000
... More
Brush: Supplying of Curved Brush - Shark Series including all labour, labour cess, materials, taxes & T&P etc. required to complete the work as per specification & direction of Engineer-in-Charge.
1
1500
1500
... More
Supplying all materials labor, labour cess, T&P & Fitting & fixing CP shower (½” x 5” ) with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge.
8
707
5658.4
... More
Supply & Fixing of Membrane Dosing Pumps "EXACTUS" model. Electronic dosing pump to be mounted both on its base as well as hung on the wall. Pumps following CE regulations. IP- 65 protection. Power connections : 220/240V, 50/60 Hz. The materials in contact with liquid are : Ploypropylene, Viton, Teflon and PVC. Includes anti-acid plastic case. Operating panel protection provided by a transparent polycarbonate cover. Lubrication not required. Flow 20l/hr @ 5 bar including all labour, labour cess, materials, taxes & T&P etc. required to complete the work as per specification & direction of Engineer-in-Charge.
2
42000
84000
... More
CLEANING AND MAINTENANCE ACCESSORIES
-
-
-
... More
Supplying all materials, labour, labour cess, T&P of following dia unplasticized P.V.C. pipe includimg fittings conforming to IS 4985/2000 including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification all complete as per P.H. specification and direction of the Engineer in charge.
-
-
-
... More
Supplying of 110mm U-PVC SWR Pipe with labour, labour cess, T&P and fitting and fixing Pipe soil waste ventilating pipes and fittings conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials etc. all complete as per specification and direction of the Engineer-in-charge.
55
386
21241
... More
Supplying all materials, labour, labour cess, T&P and fixing standard sized CP Towel ring complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge.
4
546
2187.2
... More
Centrifugal Cast Iron Pumps 3000 r.p.m. Mechanical Seal in Stainless Steel. I.P.-54 motor protection. Stainless steel AISI-420 shaft. With stainless steel AISI-316 strainer basket. Conn. PN-16 according to DIN2501. Flowrate : 125m3/h @ 12m.head. 5 HP Voltage 400V/ 3 ph. (2 working and 1 standby) including all labour, labour cess, materials, taxes & T&P etc. required to complete the work as per specification & direction of Engineer-in-Charge.
3
150000
450000
... More
Grade 3. Size 0.5 mm - 1.0 mm (in Bag)
40
900
36000
... More
Supplying all materials, labour, labour cess, T&P and providing and fixing Granite Tiles 10mm Thick - 2 x 1.50 x 0.60 on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.
1.8
2910
5239.62
... More
75 mm dia PVC pipe 10 Kg/Sqcm
150
280
42000
... More
Supply of Two Component Epoxy Grout (In Bag)
75
3300
247500
... More
Supplying all materials, labour T&P and fitting and fixing of 15mm dia CP Pillar cock of approved quality with supply of all joiniting materials including cost & conveyance of all materials, all labour, labour cess, taxes, & T&P etc. all complete as per specification and direction of the Engineer-in-charge.
4
925
3703.2
... More
Constructing Manholes (inside size 750mm x 450mm and 450mm deep) with 15 cm thick R.C.C top slab in (1:2:4) mix having 10mm dia Tor steel @ 10cm C/C both way, foundation 20cm thick cement concrete (1:4:8), inside plaster 12mm thick with cement mortar (1 :3) finished with neat cement punning, 12mm thick outside cement plaster (1:3), 25cm thick brick work with K.B bricks having crushing strength not less than 75kg/cm2 with dimensional tolerance ± 8 percent in cement mortar (1:4), cement concrete (1:2:4) finished smooth using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including cost of all materials, labour & labourcess complete as per specification and direction of Engineer-in-Charge.
3
10132
30398.7
... More
110 mm dia PVC pipe 10 Kg/Sqcm
200
300
60000
... More
Providing, fitting and fixing in proper position Seasoned Dressed Sal wood Chaukaths of best quality with applying coal tar 2 coats coaltar on the wall side surface of the choukath including cutting the grooves in chaukaths including cost of all materials, labour, labour cess, conveyance, taxes, T&P etc. complete as per direction of Engineer-in-charge.
0.39
84111
32803.29
... More
Supplying of 110mm U-PVC Plain bend with labour, labour cess, T&P and fitting and fixing Pipe soil waste ventilating pipes and fittings conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials etc. all complete as per specification and direction of the Engineer-in-charge.
10
220
2207
... More
Supplying of 110mm U-PVC offset bend with labour, labour cess, T&P and fitting and fixing Pipe soil waste ventilating pipes and fittings conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials etc. all complete as per specification and direction of the Engineer-in-charge.
6
490
2944.8
... More
Supply and fixing of shock treatement charts duly laminated along with separate colour single line diagram laminated, to be fixed in Electrical control panel room as per direction of Engg.-in-Charge.
1
760
760
... More
LADDER: Supply & fixing of Ladder width 500 mm Ø 43 mm handrail, non-slip surface stainless treads, bright satin finish, anchoring fixtures for connection to the equipotential circuit and removable anchoring with plate for fastening to wall. AISI-316 handrail and steps.4 “Luxe” steps + 1 double safety step including all labour, labour cess, materials, taxes & T&P etc. required to complete the work as per specification & direction of Engineer-in-Charge.
4
53932
215730
... More
Ball Valve dia 75 mm including all labour, labour cess, materials, taxes & T&P etc. required to complete the work as per specification & direction of Engineer-in-Charge.
6
2100
12600
... More
Supply& fixing of Modular type 6 Amp one way switch and 6 A socket outlet with metal box and modular cover Separate Board on surface or recess including all conection as per special conditions of contract making good the damages caused complete as per the direction of Engineer-in-charge. All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. (Make :Legrand(Myrius)/Schnider(Zencelo)//PANASONIC(VISION))
5
547
2735.5
... More
Supply ,Installation and testing of Surface mounted indoor type 20 WATT LED Extruded Aluminium lumen o/p not less than 2000 lm LED Batten with Opal Diffuser, IP20, & Functioning as per Product TDS complete assembly With supply of required T&P and making connection from the suitable point outlet as per the Direction of Engineer-In-Charge.MAKE: PANASONIC/PHILIPS/BAJAJ/CROMPTON/WIPRO/HAVELLS/LT
10
680
6802
... More
PANEL:Incomer:100 A 4P MCCB (25 KA) with adjustable thermal setting Ics = 100% of Icu Bus bar: 4 nos. 100 A CU Busbar duly sleeved 4 Nos 40A 4P MCB. (10 KA) Instruments: 1 set.LED type phase indicating lamps with control fuses 8 Nos 40A DP MCB. (10 KA) Complete duly factory wired as per SLD and panel should have proper earth by suitable rated Aluminium flat earthing studs as per specification mentioned below duly factory wired conforming to the relevant ISS and as per special conditions of contract making good the damages caused complete as per the direction of Engineer-in-charge..MAKE OF MCCB- LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS
Make of MCBs- LEGRAND-DPX3/Siemens-Betaguard-Schneider-Acti-9
1
48457
48457.3
... More
2 x 2.5 sq.mm. + 1 x 1.5 sq.mm.
90
171
15444
... More
2 x 1.5 sq.mm. + 1 x 1.5 sq.mm.
50
157
7880
... More
Supplying all materials, labour T&P and fitting and fixing of 32mm dia brass full way valve of approved quality with supply of all joiniting materials including cost & conveyance of all materials, all labour, labour cess, taxes, & T&P etc. all complete as per specification and direction of the Engineer-in-charge.
4
2081
8324.4
... More
Supplying of 110mm U-PVC ‘P’ Trap with labour, labour cess, T&P and fitting and fixing Pipe soil waste ventilating pipes and fittings conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials etc. all complete as per specification and direction of the Engineer-in-charge.
10
396
3964
... More
CHEMICAL DOSING SYSTEM FOR POOL ACID AND CHLORINE
-
-
-
... More
Supplying all materials, labour T&P and fitting and fixing of 125mm CP grating of approved quality with supply of all joiniting materials including cost & conveyance of all materials, all labour, labour cess, taxes, & T&P etc. all complete as per specification and direction of the Engineer-in-charge.
11
96
1064.8
... More
Electrical
-
-
-
... More
6 Sq mm Four core cable
100
165
16510
... More
Providing and painting with two coats of Weather Coat of approved quality, make and shade to give an even surface including the cost of all materials, labour, labour cess conveyance, taxes, loading, unloading, scaffolding, T&P, etc. all complete as per specification and direction of the Engineer-in-Charge.
402.87
99
40166.14
... More
Ball Valve dia 50 mm including all labour, labour cess, materials, taxes & T&P etc. required to complete the work as per specification & direction of Engineer-in-Charge.
3
1200
3600
... More
Providing and fixing of 20mm dia Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints including all labour, labour cess, material, taxes etc. complete as per direction of Engineer-in-Charge.
45.56
303
13804.68
... More
2.5 Sq mm Two core cable
300
73
22152
... More
Group A
10
455
4553
... More
Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9 as per direction of Engg.-in-Charge. The Distribution boards should be Replacement Warranty will be 3 years.
-
-
-
... More
4 Way(8+12) Way TPN MCB DD DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door Warranty on DB is 3 years
1
3461
3461.6
... More
Supplying all materials, labour T&P and fitting and fixing of 15mm dia CP Long Body Bib cock of approved quality with supply of all joiniting materials including cost & conveyance of all materials, all labour, labour cess, taxes, & T&P etc. all complete as per specification and direction of the Engineer-in-charge.
8
988
7904.8
... More
Supplying and fixing of 10 Watt LED inverter Bulb of HaLONIX make , OR equivallent to any other reputed make as approved etc as complete and as per the direction of E.I.C.MAKE: WIPRO/HALONIX/PHILIPS/BAJAJ
10
636
6362
... More
Spply and applying of following grade in bag as Active Clear Glass Media • More efficient and environmentally friendly filtration.
• Greater filtration capacity.
• Water and energy savings.
• Cleaner filter bed as bacteria does not remain trapped and fewer chemical products are needed including all labour, labour cess, materials, taxes & T&P etc. required to complete the work as per specification & direction of Engineer-in-Charge.
-
-
-
... More
Supplying of 110mm U-PVC Cowl with labour, labour cess, T&P and fitting and fixing Pipe soil waste ventilating pipes and fittings conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials etc. all complete as per specification and direction of the Engineer-in-charge.
4
93
373.2
... More
Supplying all materials,labour, labour cess, T&P and fixing Flat back lipped wall (Mini stall urinal -630mmx180mm) urinal including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in charge.
3
2726
8180.7
... More
Vacuum Head: Supplying of Double Metallic Vaccum Head -800mm with trailing cable including all labour, labour cess, materials, taxes & T&P etc. required to complete the work as per specification & direction of Engineer-in-Charge.
1
12000
12000
... More
Designing, Supervision, Installation, Testing and commissioning of Mechanical, Electrical & PH (MEP) works in swimming pool including all labour, labour cess, taxes & T&P etc. required to complete the work as per specification & direction of Engineer-in-Charge. (Furnish work completion Certificate from Authorized Company/Agent of MEP work)
1
200000
200000
... More
200 mm dia PVC pipe 10 Kg/Sqcm
150
900
135000
... More
Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures including Cost of labour, labour cess, coveyance, taxes, loading, unloading, T&P, etc. all complete as per direction of Engineer-in-charge.
2.34
5010
11724.8
... More
Earth work in excavation of foundation in all type of soil with in 50m initial lead & 1.5m initial lift with rough dressing, levelling the bed including cost of all labour and labour cess etc. complete the work as per the direction of the Engineer-In-Charge.
1184.51
201
238915.67
... More
Providing, lifting, hoisting and laying in Position Reinforced Cement Concrete of M-30 grade in R.C.C. Chajja including cost of Centering and shuttering using 20mm and down grade size black hard granite (Crusher Broken) chips of approved quality from approved quary including the cost of all materials, cost of all labour, conveyance, taxes, T&P, royalty, labour cess, all complete as per the direction of Engineer-in-charge (but excluding the cost of steel reinforcement).
0.84
8923
7495.4
... More
4 x 6.0 sq.mm. + 2 x 4 sq.mm.
80
316
25336
... More
Supply and fixing of ISI marked modular type 2nos 6Amp socket with switch on suitable size of metal box and modular cover in front on surface or recess including all conection as per direction of E.I.C. All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. (Make :Legrand(Myrius)/Schnider(Zencelo)//PANASONIC(VISION)
5
938
4690
... More
Supplying of 110mm U-PVC Plain tee with labour, labour cess, T&P and fitting and fixing Pipe soil waste ventilating pipes and fittings conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials etc. all complete as per specification and direction of the Engineer-in-charge.
16
286
4582.4
... More
Supplying all materials, labour T&P and fitting and fixing of 15mm dia CP angle stop cock of approved quality with supply of all joiniting materials including cost & conveyance of all materials, all labour, labour cess, taxes, & T&P etc. all complete as per specification and direction of the Engineer-in-charge.
11
935
10288.3
... More
Labour for Tile Fixing in swimming pool
297.4
484
144001.08
... More
Providing and Painting of Priming one coat with wood primer of approved quality, make and shade on Iron / Wood Works including the cost of sand papering, surface polishing, cost of all materials, cost of labour, labour cess, conveyance, taxes, loading, unloading, scaffolding, T&P, etc. as per direction of Engineer-in-charge.
56.34
75
4253.67
... More
Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing including labour, labour cess, etc. complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge
26
233
6071
... More
Grating Support Profile: Made in plastic. Suitable for 35mm high grating in 2 m length including all labour, labour cess, materials, taxes & T&P etc. required to complete the work as per specification & direction of Engineer-in-Charge.
60
1200
72000
... More
Corner Tiles: Supply & fixing of 90° corner tiles for overflow channels made of white, injection moulded copolymer polypropylene. Height 22 mm, channel width 295 mm including all labour, labour cess, materials, taxes & T&P etc. required to complete the work as per specification & direction of Engineer-in-Charge.
4
3600
14400
... More
Supplying of 110mm U-PVC Coupler with labour, labour cess, T&P and fitting and fixing Pipe soil waste ventilating pipes and fittings conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials etc. all complete as per specification and direction of the Engineer-in-charge.
14
164
2305.8
... More
Pool Drains: Drain grille in SS 304. 500mm x 500mm Flow: 136m3/hr including all labour, labour cess, materials, taxes & T&P etc. required to complete the work as per specification & direction of Engineer-in-Charge.
2
21000
42000
... More
Wafer Type Check Valve dia 110 mm including all labour, labour cess, materials, taxes & T&P etc. required to complete the work as per specification & direction of Engineer-in-Charge.
5
3300
16500
... More
300 mm dia PVC pipe 10 Kg/Sqcm
100
1500
150000
... More
Providing and fixing 32mm thick flush door shutters made out of 32mm thick BWR Block Board including the cost of hardware fittings like 125mm MS Butt Hinges, 250mm MS Aldrop, 150mm MS Handle, 150mm MS tower bolt, door stopper, including Cost of labour, labour cess, coveyance, taxes, loading, unloading, T&P, etc. all complete as per direction of Engineer-in-charge.
18.17
10773
195750.86
... More
Supplying all materials, labour T&P and fitting and fixing of 15mm dia CP Health faucet of approved quality with supply of all joiniting materials including cost & conveyance of all materials, all labour, labour cess, taxes, & T&P etc. all complete as per specification and direction of the Engineer-in-charge.
3
879
2637.3
... More
160 mm dia PVC pipe 10 Kg/Sqcm
150
670
100500
... More
Supplying all materials, labour, labour cess, T&P and and fixing of 10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materialsetc. all complete as per P.H specification and direction of the Engineer-in-charge.
4
1983
7933.6
... More
Cutting, Straightening, coiled or bent up MS Road of TOR steel using SAIL/RINL/TATA/JINDAL Steel including bending, binding,welding and joining if necessary and tying the grills and placing in position as required for RCC work and hoisting, lowering laying icluding cost, conveyance, taxes of MS rod or TOR steel and binding wire of 18 to 20 gauge and labour, labour cess required for the work for bending,binding and tying the grills etc. complete as per the direction of Engineer-in-charge.
532.65
8862
4720450.83
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Bhadrak, Odisha