All India Institute Of Medical Sciences Tender
... More
The AIIMS has issued a formal invitation for competitive bids for the All India Institute Of Medical Sciences project, for Sitc Of New Lt Panel For 3 Ipd Chiller Plant At Hospital Complex, in Bhubaneswar, Odisha, with an estimated contract value of Rs. 2,28,20,913. The bid opening date for this tender is 17-05-2025 and the last date for bid submission is 10-06-2025. Interested bidders for All India Institute Of Medical Sciences tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
All India Institute Of Medical Sciences - AIIMS Tender
Electrical and Electronics
Eprocure
Opening Date17 May 2025
Closing Soon10 Jun 2025
Tender Amount₹ 2,28,20,913
Technical
Technical
Additional Eligibility
Class Of Bidder
... View More
The eligible class required by a bidder to participate in the tender can be considered as agencies of CPWD, MES, AIIMS, Central Govt., State Govt., Central PSU, State PSU.
Technical Capacity
... View More
The bidder should have satisfactorily completed similar works during the last seven years. The similar work experience required is as follows:
- One similar work costing not less than ₹ 1,82,56,730.00
- Or two similar works each costing not less than ₹ 1,36,92,548.00
- Or three similar works each costing not less than ₹ 91,28,365.00
Similar work means “Supply, Installation, Testing and Commissioning of LT and above category (electrical Panels or RMU or compact substation or feeder pillars ) with associated works like Cable, Busduct etc.” The bidder should have completed similar works with a value of at least 50% of the estimated cost, which is ₹ 1,14,10,457.00 (50% of ₹ 2,28,20,913.00). Certificates of Work Experience to be issued by the officer of the rank not below Executive Engineer.
Costs
EMD
₹ 4,56,418Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Sitc Of New Lt Panel For 3 Ipd Chiller Plant At Hospital Complex,
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_AIIMO_860516_1Tender No
AIIMS/BBSR/ENGG/ELECT/62/2025Tender Authority
All India Institute Of Medical Sciences ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
SITC of Maintenance free chemical earthing of 3-meter length 50 mm dia copper bonded earthing electrode with 50 kg EBFC. Earth pit digging by manually size of earth pit 3feet/2.5 ft X 10 ft depth and providing masonry enclosure with cover plate having locking arrangement complete as required. Electrode - 50MM Copper Cladded Earth 3 mtr length. The thickness of the copper coating will be 250 microns and uniform with tolerance level of 0.1 micron with good soil if required
4
27411
109644
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
10
2368
23685.300000000003
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer incharge. All kinds of soil
75
172
12953.25
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
4
2066
8265.64
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
4
6628
26512.32
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level : Thermo-Mechanically Treated bars of grade Fe-500D or more.
1200
104
125928
... More
Centering and shuttering including strutting, propping etc. and removal of form for : Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
155
819
127061.25
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominalsize derived from natural sources)
15
8801
132022.65
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
80
190
15256.800000000001
... More
Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in : Cement mortar 1:4 (1 cement : 4 coarse sand)
4
8720
34881.48
... More
CEMENT PLASTER (IN COARSE SAND): 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)
24
347
8344.8
... More
Providing and fixing aluminium work for doors, windows, ventilatorsand partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved makeconforming to IS: 733 and IS: 1285, fixing with dash fasteners ofrequired dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion : Powder coated aluminium (minimum thickness of powder coating 50 micron)
145
516
74902.65000000001
... More
Providing and fixing aluminium work for doors, windows, ventilators
and partitions with extruded built up standard tubular sections/
appropriate Z sections and other sections of approved make
conforming to IS: 733 and IS: 1285, fixing with dash fasteners of
required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) : Powder coated aluminium (minimum thickness of powder coating 50 micron)
120
617
74078.40000000001
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid
in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
15
1464
21969.149999999998
... More
Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
4
514
2058.28
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete
352
120
42331.520000000004
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
800
130
104072
... More
Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.
100
1649
164918
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%