Department Of School Education Tender

The Department Of School Education has issued a formal invitation for competitive bids for Infrastructural Development Of Lighthouse School Complex - Government Higher Secondary School (ghss) Phek Under Phek District in Phek, Nagaland, with an estimated contract value of Rs. 17,74,00,000. The bid opening date for this tender is 16-10-2024 and the last date for bid submission is 21-11-2024. Interested bidders for Department Of School Education tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Department Of School Education Tender

Works

Civil And Construction

Building Construction

Eprocure

Opening Date16 Oct 2024

Closing Date21 Nov 2024

Tender Amount₹ 17,74,00,000

Email

Download

Costs

EMD
₹ 17,74,000
Document Cost
₹ 15,000
Tender Fee
Refer Documents

Summary

Infrastructural Development Of Lighthouse School Complex - Government Higher Secondary School (ghss) Phek Under Phek District

Description

Unlock the Tender details for free

Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Tender Id
2024_DSE_716_1
Bid Award Id
View
Tender No
IN-DSE-456420-CW-RFB
Tender Authority
Department Of School Education View
Purchaser Address
-
Website
http://nagalandtenders.gov.in

Unlock the Tender details for free

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

Request Call Back

Documents

Tender Notice-1106.9 kBTendernotice_1.pdf

NOTICE INVITING TENDER

BOQ-1904.7 kBBOQ_839.xls

BOQ

Corrigendum-1162.3 kBCorrigendum_Phek.p...Corrigendum_Phek.pdf

Document-337.2 MBGHSS_Phek_Section_...GHSS_Phek_Section_II.pdf

DRAWING SECTION II

Document-24.9 MBRFB_Phek.pdf

RFB

Report Missing Document

BOQ Items

DO_NOT_SHOW

Quantity-

Rate-

Amount -

View all details for FREE

Providing and laying in position ready mixed M25 grade concrete for RCC work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixture, manufactured as per Mix Design of specified Grade for RCC work, including pumping of RMC from transit mixer to site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including cost of admixtures in recommended proportions as per 15-9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in charge. (NOTE: Cement content considered in this item is @ 330 kg/cum. Excess or less cement used as per design mix is payable or recoverable separately)

Quantity-

Rate-

Amount -

With F. P. S. (non-modular) bricks

Quantity54.25

Rate-

Amount -

b. Copper wire 4sq.mm

Quantity5

Rate-

Amount -

Providing and fixing white vitreous China flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS: 2556, C.1. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required:

Quantity-

Rate-

Amount -

Hot finished welded type tubes

Quantity34017.06

Rate-

Amount -

Construction of granular sub-base by providing granular material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory power roller to achieve the desired density, complete as per clause 401

Quantity-

Rate-

Amount -

Two or more coats on new work

Quantity512.67

Rate-

Amount -

For shutters of doors, windows, ventilators including providing and fixing hinges/pivots and making provision for fixing of fitting wherever required including the cost of EPDM rubber/ neoprene gasket required (Fitting shall be paid for separately)

Quantity-

Rate-

Amount -

Fixed to opening/ wooden frames with rawl plugs screws etc.

Quantity64.8

Rate-

Amount -

Two or more coats on new work

Quantity263.74

Rate-

Amount -

1:6 (1 cement :6 Coarse sand)

Quantity1556.38

Rate-

Amount -

Cement mortar 1:4 (1 cement : 4 coarse sand)

Quantity139.46

Rate-

Amount -

All Kinds of soil

Quantity42.92

Rate-

Amount -

Masonry work (first sort), in Cement mortar 1:6 (1 cement: 6 coarse sand)

Quantity143.1

Rate-

Amount -

Foundations, footings, bases of Columns

Quantity199.86

Rate-

Amount -

Surface Dressing

Quantity-

Rate-

Amount -

b. MCB 16A

Quantity9

Rate-

Amount -

d. Call bell Point Long

Quantity1

Rate-

Amount -

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-Charge. (Note: Butt hinges and necessary screws shall be paid seperately)

Quantity-

Rate-

Amount -

With F. P. S. (non-modular) bricks

Quantity53.64

Rate-

Amount -

b. MCB 16A

Quantity35

Rate-

Amount -

12 mm cement plaster of mix:

Quantity-

Rate-

Amount -

1:4 (1 cement :4 fine sand)

Quantity299.16

Rate-

Amount -

Supply and Installation Hooter

Quantity3

Rate-

Amount -

6 mm cement plaster of mix:

Quantity-

Rate-

Amount -

Granite stone of any colour and shade

Quantity2.3

Rate-

Amount -

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having thermal stability for hot & cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer-in-charge

Quantity-

Rate-

Amount -

Painting with synthetic enamel paint of approval brand and manufacture to give an even shade

Quantity-

Rate-

Amount -

Supplying and installing Energy Meter

Quantity2

Rate-

Amount -

b. With 2.5 mm2 copper cable s/core

Quantity3700

Rate-

Amount -

Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15):

Quantity286.74

Rate-

Amount -

e. 100 Sq.mm Al. LT. Power Cable

Quantity120

Rate-

Amount -

b. Long point

Quantity50

Rate-

Amount -

Cement mortar 1:4 (1 cement : 4 coarse sand)

Quantity16.38

Rate-

Amount -

With FPS( Non-Modular) bricks

Quantity31.02

Rate-

Amount -

Foundations, footings, bases of Columns

Quantity397.97

Rate-

Amount -

c. Light point Long

Quantity2

Rate-

Amount -

All works upto Plinth level

Quantity145.74

Rate-

Amount -

Stone tile work for wall lining upto 10 m height with special adhesive over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shades.

Quantity-

Rate-

Amount -

With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Quantity1454.63

Rate-

Amount -

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 Cement: 3 Coarse sand), jointing with Grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc., complete

Quantity-

Rate-

Amount -

Providing Zinc Aluminium Alloy Galvanized coloured trapezoidal profile steel (width 1120 mm) (DYNA, DURASHINE, BLUESCOPE etc) complete (upto a pitch of 60 degrees) excluding the cost of purlins, rafters and trusses.

Quantity-

Rate-

Amount -

COMPOUND WALL PART A

Quantity-

Rate-

Amount -

125 mm

Quantity28

Rate-

Amount -

Wiring with 3 pin 15A plug with single core copper cable 4mm2 in surface casing capping i.e. providing and fixing anchor made 3 pin 15A socket outlet and 15A flush type switches and earthing the third pin etc.

Quantity-

Rate-

Amount -

Second class Teak wood

Quantity-

Rate-

Amount -

Wall painting with Acrylic emulsion paint, having VOC (Volatile organic compound) content less than 50 gm/litre, of approved brand and manufacturer, including applying additional coats wherever required, to achieve even shade and colour. Two Coats

Quantity299.16

Rate-

Amount -

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand):

Quantity-

Rate-

Amount -

Wiring with 1.5 mm2 single core copper cable in surface casing capping i.e. providing and fixing anchor made 5A flush type switches and all other accessories

Quantity-

Rate-

Amount -

100x75x4 mm

Quantity42

Rate-

Amount -

Armed cable for Main 4 core X 10 Sqmm for Building

Quantity70

Rate-

Amount -

With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm)

Quantity15.4

Rate-

Amount -

Steel work in built up tubular (round, square or rectangular hollow tubes etc) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

Quantity-

Rate-

Amount -

12 mm cement plaster finished with floating coat of neat cement of mix

Quantity-

Rate-

Amount -

White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Quantity2

Rate-

Amount -

With FPS( Non-Modular) bricks

Quantity76.45

Rate-

Amount -

Hot Rolled deformed bars

Quantity20553.29

Rate-

Amount -

Two or more coats on new work

Quantity467.68

Rate-

Amount -

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing.

Quantity-

Rate-

Amount -

Providing and laying in position ready mixed M25 grade concrete for RCC work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixture, manufactured as per Mix Design of specified Grade for RCC work, including pumping of RMC from transit mixer to site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including cost of admixtures in recommended proportions as per 15-9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in charge. (NOTE: Cement content considered in this item is @ 330 kg/cum. Excess or less cement used as per design mix is payable or recoverable separately)

Quantity-

Rate-

Amount -

Providing and laying in position ready mixed M25 grade concrete for RCC work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixture, manufactured as per Mix Design of specified Grade for RCC work, including pumping of RMC from transit mixer to site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including cost of admixtures in recommended proportions as per 15-9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in charge. (NOTE: Cement content considered in this item is @ 330 kg/cum. Excess or less cement used as per design mix is payable or recoverable separately)

Quantity-

Rate-

Amount -

Rectangular shape 453x357mm dia.

Quantity2

Rate-

Amount -

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately)

Quantity-

Rate-

Amount -

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the direction of Engineer-in-Charge. (Cost of aluminium snap beading shall be paid in basic item)

Quantity-

Rate-

Amount -

Providing and applying two coat of fire retardant paint on cleaned wood/ ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendation of manufacturer to make the surface fire retardant.

Quantity5.04

Rate-

Amount -

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.(ii) 2nd course of 20 mm cement plaster 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) 3rd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.(iv) 4th course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm)

Quantity104.34

Rate-

Amount -

b. Light point Medium

Quantity7

Rate-

Amount -

For thickness of tiles 10 mm to 25 mm

Quantity1106.25

Rate-

Amount -

a. MCB 10A

Quantity6

Rate-

Amount -

Providing and fixing ISI marked flush door shutters conforming to S: 2202 (part 1) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.

Quantity-

Rate-

Amount -

WATER BOUND MACADAM (W.B.M) ROAD

Quantity-

Rate-

Amount -

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement: 4 coarse sand) C.I. cover with frame (light duty) 455 x 610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:1.5:3 mix (1 cement :1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement: 5 fine sand 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:

Quantity-

Rate-

Amount -

f. With 1mm copper cable s/core for earth continuity

Quantity710

Rate-

Amount -

1:6 (1 cement :6 Coarse sand)

Quantity263.74

Rate-

Amount -

Half brick masonry with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.

Quantity-

Rate-

Amount -

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand):

Quantity-

Rate-

Amount -

Providing and applying two coat of fire retardant paint on cleaned wood/ ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendation of manufacturer to make the surface fire retardant.

Quantity5.04

Rate-

Amount -

Reinforced cement concrete work in walls (any thickness), Including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upto floor five level excluding cost of centering, shuttering, finishing and reinforcement.

Quantity-

Rate-

Amount -

Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15):

Quantity166.86

Rate-

Amount -

125 mm

Quantity106

Rate-

Amount -

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

Quantity-

Rate-

Amount -

k. Change over Switch 100A

Quantity1

Rate-

Amount -

35mm thick shutters

Quantity30.24

Rate-

Amount -

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work upto Plinth Level

Quantity-

Rate-

Amount -

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z-sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia in size, including necessary filling up the gaps at junctions 1.e at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawing and the direction of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for seperately)

Quantity-

Rate-

Amount -

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete:

Quantity-

Rate-

Amount -

d. Call bell Point Long

Quantity1

Rate-

Amount -

Size of Tile 600x600 mm

Quantity171.61

Rate-

Amount -

20 mm nominal outer dia Pipes

Quantity20.88

Rate-

Amount -

l. Exhaust fan with all accessories

Quantity4

Rate-

Amount -

Wiring with 3 pin 15A plug with single core copper cable 4mm2 in surface casing capping i.e. providing and fixing anchor made 3 pin 15A socket outlet and 15A flush type switches and earthing the third pin etc.

Quantity-

Rate-

Amount -

With FPS( Non-Modular) bricks

Quantity37.36

Rate-

Amount -

Providing and fixing factory made P.V.C. door frame of size 50 * 47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15 * 15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19 * 19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided throughout the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer-in-Charge.

Quantity24.75

Rate-

Amount -

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.

Quantity351.12

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for

Quantity-

Rate-

Amount -

m. LED bulb 9w

Quantity3

Rate-

Amount -

Second class teak wood

Quantity0.04

Rate-

Amount -

15 mm nominal bore

Quantity6

Rate-

Amount -

All works above Plinth level upto floor V level

Quantity96.4

Rate-

Amount -

l. Angle holder

Quantity15

Rate-

Amount -

Twin rubber stopper

Quantity14

Rate-

Amount -

j. Bracket holder

Quantity3

Rate-

Amount -

b. MCB 16A

Quantity35

Rate-

Amount -

Columns, Pillars, Piers, Abutments, Posts & Struts

Quantity1496.4

Rate-

Amount -

Providing and fixing 75mmdia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete

Quantity18.9

Rate-

Amount -

d. Isolator 40 Amp 2 pole

Quantity2

Rate-

Amount -

Foundations, footings, bases of Columns

Quantity158.92

Rate-

Amount -

Steel work in built up tubular (round, square or rectangular hollow tubes etc) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

Quantity-

Rate-

Amount -

n. Call Bell Ding Dong

Quantity1

Rate-

Amount -

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having thermal stability for hot & cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge

Quantity-

Rate-

Amount -

e. Fan point medium

Quantity26

Rate-

Amount -

c. Light point Long

Quantity3

Rate-

Amount -

30mm thick shutters

Quantity2.52

Rate-

Amount -

Applying priming coat with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.

Quantity-

Rate-

Amount -

b. With 2.5 mm2 copper cable s/core

Quantity1280

Rate-

Amount -

White Vitreous China Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Quantity1

Rate-

Amount -

W.C. pan with ISI marked black solid plastic seat and lid

Quantity1

Rate-

Amount -

With ready mix pink or gray of approved brand manufacture on wood work ( hard and soft wood)

Quantity5.04

Rate-

Amount -

Ordinary Rock

Quantity15.18

Rate-

Amount -

Fixing & Providing, Drilling holes and connection etc

Quantity-

Rate-

Amount -

Providing & fixing, drilling holes and connection etc.

Quantity-

Rate-

Amount -

b. Long point

Quantity9

Rate-

Amount -

Steel work in built up tubular (round, square or rectangular hollow tubes etc) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

Quantity-

Rate-

Amount -

Providing and fixing ISI marked flush door shutters conforming to S: 2202 (part 1) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.

Quantity-

Rate-

Amount -

o. Exhaust fan with all accessories

Quantity6

Rate-

Amount -

f. With 1mm copper cable s/core for earth continuity

Quantity2500

Rate-

Amount -

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

Quantity-

Rate-

Amount -

Brick on edge flooring with bricks of class designation 7.5 on a bed of 12mm cement mortar, including filling the joints with same mortar, with common burnt clay non-modular bricks:

Quantity-

Rate-

Amount -

e. Isolator 63 Amp 2 pole

Quantity8

Rate-

Amount -

i. Bracket holder

Quantity13

Rate-

Amount -

Providing Zinc Aluminium Alloy Galvanized coloured trapezoidal profile steel (width 1120 mm) (DYNA, DURASHINE, BLUESCOPE etc) complete (upto a pitch of 60 degrees) excluding the cost of purlins, rafters and trusses.

Quantity-

Rate-

Amount -

Providing and laying in position ready mixed M25 grade concrete for RCC work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixture, manufactured as per Mix Design of specified Grade for RCC work, including pumping of RMC from transit mixer to site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including cost of admixtures in recommended proportions as per 15-9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in charge. (NOTE: Cement content considered in this item is @ 330 kg/cum. Excess or less cement used as per design mix is payable or recoverable seperately)

Quantity-

Rate-

Amount -

12 mm thick one side prelaminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1 medium density, flat pressed, three layer particle board FPT I or graded wood particle board FPT-1 IS: 3087 - bonded with BWP type synthetic resin adhesive as per IS: 848 and prelamination conforming to IS: 12823 Grade 1, Type II marked

Quantity39.69

Rate-

Amount -

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement: 4 coarse sand) C.I. cover with frame (light duty) 455 x 610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:1.5:3 mix (1 cement :1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement: 5 fine sand 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:

Quantity-

Rate-

Amount -

Rectangular shape 600x450mm internal dimensions

Quantity1

Rate-

Amount -

Wiring with 1.5 mm2 single core copper cable in surface casing capping i.e. providing and fixing anchor made 5A flush type switches and all other accessories

Quantity-

Rate-

Amount -

With ready mix pink or gray of approved brand manufacture on wood work ( hard and soft wood)

Quantity5.04

Rate-

Amount -

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion)

Quantity-

Rate-

Amount -

Providing and laying in position ready mixed M25 grade concrete for RCC work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixture, manufactured as per Mix Design of specified Grade for RCC work, including pumping of RMC from transit mixer to site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including cost of admixtures in recommended proportions as per 15-9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in charge. (NOTE: Cement content considered in this item is @ 330 kg/cum. Excess or less cement used as per design mix is payable or recoverable seperately)

Quantity-

Rate-

Amount -

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having thermal stability for hot & cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge

Quantity-

Rate-

Amount -

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing.

Quantity-

Rate-

Amount -

Two or more coats on new work

Quantity258.13

Rate-

Amount -

Hot Rolled deformed bars

Quantity37.5

Rate-

Amount -

(1 cement: 3 fine sand)

Quantity264.5

Rate-

Amount -

Granite stone of any colour and shade

Quantity6.81

Rate-

Amount -

Coursed rubble masonry (first or second sort) with hard stone In super structure above plinth level and upto floor five level:

Quantity-

Rate-

Amount -

Kota stone slab flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (1 cement: 4 coarse 25 mm thick

Quantity8.37

Rate-

Amount -

8mm thick (mirror polished and machine cut edge)

Quantity-

Rate-

Amount -

12 mm thick one side prelaminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1 medium density, flat pressed, three layer particle board FPT I or graded wood particle board FPT-1 IS: 3087 - bonded with BWP type synthetic resin adhesive as per IS: 848 and prelamination conforming to IS: 12823 Grade 1, Type II marked

Quantity20.69

Rate-

Amount -

Providing and fixing white vitreous China pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked black solid plastic seat and lid

Quantity-

Rate-

Amount -

ACADEMIC FIRST FLOOR CIVIL

Quantity-

Rate-

Amount -

12 mm cement plaster finished with floating coat of neat cement of mix

Quantity-

Rate-

Amount -

e. With 10mm2 copper cable s/core

Quantity1300

Rate-

Amount -

12 mm thick one side prelaminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1 medium density, flat pressed, three layer particle board FPT I or graded wood particle board FPT-1 IS: 3087 - bonded with BWP type synthetic resin adhesive as per IS: 848 and prelamination conforming to IS: 12823 Grade 1, Type II marked

Quantity14.28

Rate-

Amount -

Providing expansion joints with 25mm thick bituminous pad as per detailed drawings etc. complete

Quantity22.77

Rate-

Amount -

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level

Quantity-

Rate-

Amount -

With FPS( Non-Modular) bricks

Quantity24.84

Rate-

Amount -

Flat surfaces

Quantity126.54

Rate-

Amount -

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore

Quantity2

Rate-

Amount -

Painting with synthetic enamel paint of approval brand and manufacture to give an even shade

Quantity-

Rate-

Amount -

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Quantity1

Rate-

Amount -

Hot Rolled deformed bars

Quantity34009.23

Rate-

Amount -

With common burnt clay F.P.S. (non-modular) bricks of class designation 7.5

Quantity1

Rate-

Amount -

With F.P.S (Non-Modular) bricks

Quantity326.88

Rate-

Amount -

Cement mortar 1:4 (1 cement : 4 coarse sand)

Quantity139.46

Rate-

Amount -

Rectangular shape 453x357mm dia.

Quantity14

Rate-

Amount -

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level

Quantity-

Rate-

Amount -

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand):

Quantity-

Rate-

Amount -

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Quantity-

Rate-

Amount -

Reinforced cement concrete work in walls (any thickness), Including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upto floor five level excluding cost of centering, shuttering, finishing and reinforcement.

Quantity-

Rate-

Amount -

n. LED Double tube light fitting 2x40wx4 with all accessories

Quantity12

Rate-

Amount -

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth: consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m

Quantity1744.81

Rate-

Amount -

b. Light point Medium

Quantity20

Rate-

Amount -

Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement: 2 Coarse sand) to match the existing floor. With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Quantity-

Rate-

Amount -

Twin rubber stopper

Quantity53

Rate-

Amount -

Columns, Pillars, Piers, Abutments, Posts & Struts

Quantity902.81

Rate-

Amount -

Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) i/c necessary excavation foundation concrete 1:5:10 ( 1 cement :5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 ( 1 cement :3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design. With common burnt clay F.P.S( non-modular ) bricks of class designation 7.5

Quantity3

Rate-

Amount -

Wiring for circuit/sub-main with pvc insulated copper cable core in surface casing capping etc.

Quantity-

Rate-

Amount -

f. MCB Box 10 ways

Quantity4

Rate-

Amount -

125 mm

Quantity20

Rate-

Amount -

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:

Quantity-

Rate-

Amount -

Wall painting with Acrylic emulsion paint, having VOC (Volatile organic compound) content lesss than 50 gm/liter, of approved brand and manufacturer, including applying additional coats wherever required, to achieve even shade and colour.

Quantity-

Rate-

Amount -

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work upto Plinth Level

Quantity-

Rate-

Amount -

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

Quantity429.87

Rate-

Amount -

Providing and fixing white vitreous China flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS: 2556, C.1. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required:

Quantity-

Rate-

Amount -

Using Screening Crushable type such as Moorum or Gravel

Quantity124.65

Rate-

Amount -

250x16 mm

Quantity20

Rate-

Amount -

LANDSCAPING WORK

Quantity-

Rate-

Amount -

Supplying and installing wall mounting swinging Hose reel drum fitted with 19 mm dia. 30 meter high pressure polypropylene (Polyhouse) long fitted with necessary accessories complete as per specification no. FF-FFA/HV

Quantity3

Rate-

Amount -

50 mm nominal outer dia Pipes

Quantity3.3

Rate-

Amount -

1:1.5:3 (1 Cement: 1.5 coarse sand 3 graded stone aggregate 20 mm nominal size)

Quantity0.88

Rate-

Amount -

100x100 mm size P type

Quantity-

Rate-

Amount -

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand):

Quantity-

Rate-

Amount -

Providing Zinc Aluminium Alloy Galvanized coloured trapezoidal profile steel (width 1120 mm) (DYNA, DURASHINE, BLUESCOPE etc) complete (upto a pitch of 60 degrees) excluding the cost of purlins, rafters and trusses.

Quantity-

Rate-

Amount -

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having thermal stability for hot & cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer-in-charge

Quantity-

Rate-

Amount -

f. MCB Box 10 ways

Quantity4

Rate-

Amount -

Applying priming coat

Quantity-

Rate-

Amount -

1:4 (1 cement :4 Fine sand)

Quantity664.8

Rate-

Amount -

With common burnt clay F.P.S. (non-modular) bricks of class designation 7.5

Quantity1

Rate-

Amount -

c. MCB 20A

Quantity3

Rate-

Amount -

All works above Plinth level upto floor V level

Quantity124.9

Rate-

Amount -

Single half stall urinal with 5 litre P.V.C. automatic flushing cistern

Quantity12

Rate-

Amount -

Half brick masonry with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.

Quantity-

Rate-

Amount -

All works above Plinth level upto floor V level

Quantity22.51

Rate-

Amount -

b. MCB 16A

Quantity12

Rate-

Amount -

a. Medium point

Quantity6

Rate-

Amount -

Providing Zinc Aluminium Alloy Galvanized coloured trapezoidal profile steel (width 1120 mm) (DYNA, DURASHINE, BLUESCOPE etc) complete (upto a pitch of 60 degrees) excluding the cost of purlins, rafters and trusses.

Quantity-

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic excavator/Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge

Quantity-

Rate-

Amount -

b. Light point Medium

Quantity10

Rate-

Amount -

Providing and fixing 110mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.

Quantity358.2

Rate-

Amount -

Supply and Installation Fire Pump

Quantity1

Rate-

Amount -

Udaipur green marble

Quantity118.3

Rate-

Amount -

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement: 4 coarse sand) C.I. cover with frame (light duty) 455 x 610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:1.5:3 mix (1 cement :1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement: 5 fine sand 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:

Quantity-

Rate-

Amount -

Steel work in built up tubular (round, square or rectangular hollow tubes etc) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

Quantity-

Rate-

Amount -

1:4 (1 cement :4 Fine sand)

Quantity18.72

Rate-

Amount -

With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm)

Quantity40.45

Rate-

Amount -

d. Panel Board

Quantity2

Rate-

Amount -

1:3:6 (1 Cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size)

Quantity4.57

Rate-

Amount -

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately)

Quantity-

Rate-

Amount -

b. Light point Medium

Quantity20

Rate-

Amount -

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level

Quantity-

Rate-

Amount -

Rectangular shape 453x357mm dia.

Quantity2

Rate-

Amount -

External work

Quantity-

Rate-

Amount -

Wall painting with Acrylic emulsion paint, having VOC (Volatile organic compound) content lesss than 50 gm/liter, of approved brand and manufacturer, including applying additional coats wherever required, to achieve even shade and colour.

Quantity-

Rate-

Amount -

Providing and fixing factory made P.V.C. door frame of size 50 * 47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15 * 15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19 * 19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided throughout the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer-in-Charge

Quantity103.95

Rate-

Amount -

0.50 mm thick

Quantity382.02

Rate-

Amount -

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z-sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia in size, including necessary filling up the gaps at junctions 1.e at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawing and the direction of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately)

Quantity-

Rate-

Amount -

Two Coats

Quantity179.19

Rate-

Amount -

All Kinds of soil

Quantity74.16

Rate-

Amount -

Providing & fixing, drilling holes and connection etc.

Quantity-

Rate-

Amount -

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work upto Plinth Level

Quantity-

Rate-

Amount -

Excavation in Soil using Hydraulic Excavator and Tippers with Disposal upto 1000 metres. Unit Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and across sections, and transporting to the embankment location within all lifts and lead upto 1000m

Quantity1196.64

Rate-

Amount -

Using Screening Crushable type such as Moorum or Gravel

Quantity124.65

Rate-

Amount -

Seal Coat Description Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A and B seal coats

Quantity-

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic excavator/Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge

Quantity-

Rate-

Amount -

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:

Quantity-

Rate-

Amount -

g. MCB Box 12 ways

Quantity1

Rate-

Amount -

Supply and Installation Manual Call Point

Quantity3

Rate-

Amount -

h. Main Switch 100A

Quantity1

Rate-

Amount -

f. MCB Box 10 ways

Quantity2

Rate-

Amount -

a. Earthing complete set with copper plate 2x2x4 mm thick including charcoal, salt etc.as required. The depth of the pit shall be atleast 3m or as per moisture availability.

Quantity1

Rate-

Amount -

Compacting Original Ground supporting sub-grade

Quantity415.5

Rate-

Amount -

GIRLS HOSTEL FIRST FLOOR CIVIL

Quantity-

Rate-

Amount -

Cement mortar 1:4 (1 cement : 4 coarse sand)

Quantity16.38

Rate-

Amount -

EXTERNAL ELECTRIFICATION

Quantity-

Rate-

Amount -

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the direction of Engineer-in-Charge. (Cost of aluminium snap beading shall be paid in basic item)

Quantity-

Rate-

Amount -

250x16 mm

Quantity28

Rate-

Amount -

50 mm nominal outer dia Pipes

Quantity3.3

Rate-

Amount -

Two or more coats on new work

Quantity259.81

Rate-

Amount -

By Mix in Place Method

Quantity-

Rate-

Amount -

f. With 1mm copper cable s/core for earth continuity

Quantity2590

Rate-

Amount -

Second class teak wood

Quantity1.21

Rate-

Amount -

All works upto Plinth level

Quantity154.78

Rate-

Amount -

12 mm cement plaster of mix:

Quantity-

Rate-

Amount -

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level

Quantity-

Rate-

Amount -

W.C. pan with ISI marked black solid plastic seat and lid

Quantity7

Rate-

Amount -

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 Cement: 3 Coarse sand), jointing with Grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc., complete

Quantity-

Rate-

Amount -

Supply and Installation CO2 EXTINGUISHER

Quantity3

Rate-

Amount -

i. Pole Arm

Quantity28

Rate-

Amount -

d. With 6mm2 copper cable s/core

Quantity890

Rate-

Amount -

FIREFIGHTING GROUND FLOOR

Quantity-

Rate-

Amount -

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litter low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:

Quantity-

Rate-

Amount -

Wiring with 3 pin 5A plug with single core copper cable 2.5 mm2 in surface casing capping i.e. providing and fixing anchor made 3 pin 5A socket outlet and 5aA flush type switches and earthing the third pin etc.

Quantity-

Rate-

Amount -

b. With 2.5 mm2 copper cable s/core

Quantity1270

Rate-

Amount -

35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Quantity29.93

Rate-

Amount -

Supply and Installation ABC EXTINGUSHER

Quantity3

Rate-

Amount -

Armed cable for Main 4 core X 35 Sqmm for Building

Quantity50

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic excavator/Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge

Quantity-

Rate-

Amount -

COMPOUND WALL PART B

Quantity-

Rate-

Amount -

Fixed to opening/ wooden frames with rawl plugs screws etc.

Quantity131.22

Rate-

Amount -

FIRST FLOOR- INTERNAL ELECTRIFICATION

Quantity-

Rate-

Amount -

Columns, Pillars, Piers, Abutments, Posts & Struts

Quantity2229.65

Rate-

Amount -

Providing and laying surface dressing as wearing course in single coat using crushed stone aggregates of specified size on a layer of bituminous binder laid on prepared surface and rolling with 8- 10 tonne smooth wheeled steel roller

Quantity-

Rate-

Amount -

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

Quantity-

Rate-

Amount -

p. LED bulb 9w

Quantity5

Rate-

Amount -

Providing and fixing factory made P.V.C. door frame of size 50 * 47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15 * 15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19 * 19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided throughout the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer-in-Charge.

Quantity34.65

Rate-

Amount -

All works above Plinth level upto floor V level

Quantity39.47

Rate-

Amount -

With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Quantity698.8

Rate-

Amount -

c. with 4 mm2 copper cable s/core

Quantity1000

Rate-

Amount -

50 mm nominal outer dia Pipes

Quantity72

Rate-

Amount -

d. With 6mm2 copper cable s/core

Quantity510

Rate-

Amount -

200 * 10mm

Quantity10

Rate-

Amount -

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litter low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:

Quantity-

Rate-

Amount -

White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Quantity3

Rate-

Amount -

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the direction of Engineer-in-Charge. (Cost of aluminium snap beading shall be paid in basic item)

Quantity-

Rate-

Amount -

1:3:6 (1 Cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size)

Quantity42.27

Rate-

Amount -

a. With 1.5 mm2 copper cable s/core

Quantity1220

Rate-

Amount -

Hot finished welded type tubes

Quantity7420.39

Rate-

Amount -

Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:

Quantity-

Rate-

Amount -

Wiring for circuit/sub-main with PVC insulated copper cable core in surface casing capping etc.

Quantity-

Rate-

Amount -

Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

Quantity-

Rate-

Amount -

Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:

Quantity-

Rate-

Amount -

a. Medium point

Quantity9

Rate-

Amount -

c. Lightning arrester

Quantity1

Rate-

Amount -

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

Quantity235.01

Rate-

Amount -

e. With 10mm2 copper cable s/core

Quantity620

Rate-

Amount -

For shutters of doors, windows, ventilators including providing and fixing hinges/pivots and making provision for fixing of fitting wherever required including the cost of EPDM rubber/ neoprene gasket required (Fitting shall be paid for seperately)

Quantity-

Rate-

Amount -

f. With 1mm copper cable s/core for earth continuity

Quantity1010

Rate-

Amount -

f. Exhaust fan point medium

Quantity18

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form work for:

Quantity-

Rate-

Amount -

c. Lightning arrester

Quantity2

Rate-

Amount -

d. With 6mm2 copper cable s/core

Quantity510

Rate-

Amount -

d. Isolator 40 Amp 2 pole

Quantity15

Rate-

Amount -

Compacting Original Ground supporting Embankment

Quantity415.5

Rate-

Amount -

1:3 (1 cement :4 fine sand)

Quantity165.94

Rate-

Amount -

40 mm nominal outer dia Pipes

Quantity6.3

Rate-

Amount -

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level

Quantity-

Rate-

Amount -

j. TPN 100A

Quantity1

Rate-

Amount -

a. Medium point

Quantity9

Rate-

Amount -

d. Call bell Point Long

Quantity12

Rate-

Amount -

Wiring for circuit/sub-main with PVC insulated copper cable core in surface casing capping etc.

Quantity-

Rate-

Amount -

Wiring for circuit/sub-main with PVC insulated copper cable core in surface casing capping etc.

Quantity-

Rate-

Amount -

Lintels, Beams, Plinth beams, Girders, Bressumers & Cantilevers

Quantity145.23

Rate-

Amount -

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete:

Quantity-

Rate-

Amount -

Hot Rolled deformed bars

Quantity81719.16

Rate-

Amount -

c. MCB 20A

Quantity1

Rate-

Amount -

40 mm nominal outer dia Pipes

Quantity6.3

Rate-

Amount -

g. MCB Box 12 ways

Quantity4

Rate-

Amount -

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.(ii) 2nd course of 20 mm cement plaster 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) 3rd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.(iv) 4th course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm)

Quantity14.52

Rate-

Amount -

j. TPN 100A

Quantity1

Rate-

Amount -

RAINWATER HARVESTING

Quantity-

Rate-

Amount -

For shutters of doors, windows, ventilators including providing and fixing hinges/pivots and making provision for fixing of fitting wherever required including the cost of EPDM rubber/ neoprene gasket required (Fitting shall be paid for seperately)

Quantity-

Rate-

Amount -

100x100 mm size P type

Quantity-

Rate-

Amount -

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:

Quantity-

Rate-

Amount -

f. Change over Switch 100A

Quantity1

Rate-

Amount -

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand) including testing of joints etc. complete:

Quantity-

Rate-

Amount -

a. Medium point

Quantity10

Rate-

Amount -

k. LED Double tube light fitting 2x40wx4 with all accessories

Quantity10

Rate-

Amount -

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:

Quantity-

Rate-

Amount -

Second class Teak wood

Quantity-

Rate-

Amount -

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Quantity855.85

Rate-

Amount -

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand):

Quantity-

Rate-

Amount -

Flat surfaces

Quantity1725

Rate-

Amount -

Rectangular shape 453x357mm dia.

Quantity1

Rate-

Amount -

Kota stone slab flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (1 cement: 4 coarse)

Quantity-

Rate-

Amount -

Fixing & Providing, Drilling holes and connection etc

Quantity-

Rate-

Amount -

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete:

Quantity-

Rate-

Amount -

With F. P. S. (non-modular) bricks

Quantity6.96

Rate-

Amount -

Applying priming coat with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.

Quantity-

Rate-

Amount -

ACADEMIC GROUND FLOOR CIVIL

Quantity-

Rate-

Amount -

Concealed work, including cutting chases and making good the walls etc.

Quantity-

Rate-

Amount -

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-Charge. (Note: Butt hinges and necessary screws shall be paid seperately)

Quantity-

Rate-

Amount -

40 mm nominal outer dia Pipes

Quantity205

Rate-

Amount -

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z-sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia in size, including necessary filling up the gaps at junctions 1.e at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawing and the direction of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for seperately)

Quantity-

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for

Quantity-

Rate-

Amount -

All works upto Plinth level

Quantity32.77

Rate-

Amount -

a. With 1.5 mm2 copper cable s/core

Quantity1540

Rate-

Amount -

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Quantity1447.59

Rate-

Amount -

Size of Tile 600x600 mm

Quantity264.5

Rate-

Amount -

Lintels, Beams, Plinth beams, Girders, Bressumers & Cantilevers

Quantity669.42

Rate-

Amount -

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

Quantity251.16

Rate-

Amount -

Single half stall urinal with 5 litre P.V.C. automatic flushing cistern

Quantity3

Rate-

Amount -

c. MCB 20A

Quantity1

Rate-

Amount -

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level

Quantity-

Rate-

Amount -

Size of Tile 600x600 mm

Quantity1106.25

Rate-

Amount -

Providing and fixing 110mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.

Quantity6.6

Rate-

Amount -

1:3:6 (1 Cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size)

Quantity4.35

Rate-

Amount -

Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked materials.

Quantity-

Rate-

Amount -

200 * 10mm

Quantity53

Rate-

Amount -

Providing and fixing 110mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.

Quantity6.6

Rate-

Amount -

1:6 (1 cement :6 Coarse sand)

Quantity467.68

Rate-

Amount -

q. Call Bell Ding Dong

Quantity2

Rate-

Amount -

Fixing & Providing, Drilling holes and connection etc

Quantity-

Rate-

Amount -

e. With 10mm2 copper cable s/core

Quantity320

Rate-

Amount -

1:1.5:3 (1 Cement: 1.5 coarse sand 3 graded stone aggregate 20 mm nominal size)

Quantity0.59

Rate-

Amount -

Armed cable for Main 4 core X 4 Sqmm for Building

Quantity400

Rate-

Amount -

Second class teak wood

Quantity1.19

Rate-

Amount -

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer,in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately)

Quantity-

Rate-

Amount -

Providing and laying bituminous macadam with higher capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction

Quantity83.1

Rate-

Amount -

Concealed work, including cutting chases and making good the walls etc.

Quantity-

Rate-

Amount -

d. Call bell Point Long

Quantity12

Rate-

Amount -

Rectangular shape 453x357mm dia.

Quantity1

Rate-

Amount -

Applying priming coat

Quantity-

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic excavator/Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge

Quantity-

Rate-

Amount -

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing.

Quantity-

Rate-

Amount -

Supply and Installation Butterfly valve

Quantity2

Rate-

Amount -

Hot finished welded type tubes

Quantity7420.39

Rate-

Amount -

With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm)

Quantity2

Rate-

Amount -

Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).

Quantity-

Rate-

Amount -

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:

Quantity-

Rate-

Amount -

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

Quantity-

Rate-

Amount -

Providing and fixing white vitreous China pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked black solid plastic seat and lid

Quantity-

Rate-

Amount -

g. MCB Box 12 ways

Quantity4

Rate-

Amount -

a. Medium point

Quantity50

Rate-

Amount -

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.(ii) 2nd course of 20 mm cement plaster 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) 3rd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.(iv) 4th course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm)

Quantity175.62

Rate-

Amount -

20 mm nominal outer dia Pipes

Quantity171

Rate-

Amount -

1:3:6 (1 Cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size)

Quantity12.81

Rate-

Amount -

d. Panel Board

Quantity2

Rate-

Amount -

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.

Quantity41.2

Rate-

Amount -

With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm)

Quantity24.25

Rate-

Amount -

Ordinary Rock

Quantity910.75

Rate-

Amount -

Ordinary Rock

Quantity15.18

Rate-

Amount -

i. Angle holder

Quantity3

Rate-

Amount -

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore

Quantity5

Rate-

Amount -

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.(ii) 2nd course of 20 mm cement plaster 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) 3rd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.(iv) 4th course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm)

Quantity24.6

Rate-

Amount -

BOYS HOSTEL FIRST FLOOR- INTERNAL ELECTRIFICATION

Quantity-

Rate-

Amount -

Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15):

Quantity646.38

Rate-

Amount -

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.(ii) 2nd course of 20 mm cement plaster 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) 3rd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.(iv) 4th course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm)

Quantity14.52

Rate-

Amount -

Water Bound Macadam

Quantity-

Rate-

Amount -

Supplying and erecting ultra violet storage type water purifier ( RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water minimum 0.33 litre/min with activated carbon filter and softener operating on 230 V single phase A.C. supply with UV fail & filter change indication system .(for TDS more than 200)

Quantity2

Rate-

Amount -

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete:

Quantity-

Rate-

Amount -

d. Panel Board

Quantity2

Rate-

Amount -

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:

Quantity-

Rate-

Amount -

Wiring for circuit/sub-main with pvc insulated copper cable core in surface casing capping etc.

Quantity-

Rate-

Amount -

i. Bus-Bar 100A 4 strips

Quantity2

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for

Quantity-

Rate-

Amount -

b. Long point

Quantity12

Rate-

Amount -

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

Quantity-

Rate-

Amount -

Inside dimensions 600x850 mm and 45 cm deep for single pipe line.

Quantity-

Rate-

Amount -

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete:

Quantity-

Rate-

Amount -

e. Fan point medium

Quantity9

Rate-

Amount -

c. MCB 20A

Quantity20

Rate-

Amount -

20 mm cement plaster of mix:

Quantity-

Rate-

Amount -

With common burnt clay F.P.S ( non-modular )bricks of class designation 7.5

Quantity11

Rate-

Amount -

Rectangular shape 453x357mm dia.

Quantity14

Rate-

Amount -

All works above Plinth level upto floor V level

Quantity101.04

Rate-

Amount -

1:4 (1 cement :4 Fine sand)

Quantity18.72

Rate-

Amount -

0.50 mm thick

Quantity21.12

Rate-

Amount -

Hot Rolled deformed bars

Quantity37.5

Rate-

Amount -

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work upto Plinth Level 1:3:6 (1 Cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size)

Quantity-

Rate-

Amount -

b. Long point

Quantity9

Rate-

Amount -

Inside dimensions 600x850 mm and 45 cm deep for single pipe line.

Quantity-

Rate-

Amount -

1:6 (1 cement :6 Coarse sand)

Quantity179.19

Rate-

Amount -

All works above Plinth level upto floor V level

Quantity325.11

Rate-

Amount -

1:3:6 (1 Cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size)

Quantity4.57

Rate-

Amount -

Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15):

Quantity312.66

Rate-

Amount -

Providing and fixing tree guard 0.60 metre square, 2.00 metre high fabricated with MS angle iron 30 x 30 x 3 mm, MS iron 25 x 3; mm and steel wire3 mm dia welded and fabricated as per design in two halves bolted together

Quantity140

Rate-

Amount -

a. Medium point

Quantity40

Rate-

Amount -

Providing and fixing G.I Chain Link Fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-Charge

Quantity-

Rate-

Amount -

With cement mortar 1:4 (1 cement: 4 fine sand)

Quantity737.5

Rate-

Amount -

With F.P.S (Non-Modular) bricks

Quantity343.73

Rate-

Amount -

With common burnt clay F.P.S. (non-modular) bricks of class designation 7.5

Quantity1

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic excavator/Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge

Quantity-

Rate-

Amount -

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-Charge. (Note: Butt hinges and necessary screws shall be paid separately)

Quantity-

Rate-

Amount -

All kind of Soil

Quantity2795.4

Rate-

Amount -

Applying priming coat

Quantity-

Rate-

Amount -

1:6 (1 cement :6 Coarse sand)

Quantity1151.48

Rate-

Amount -

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litter low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:

Quantity-

Rate-

Amount -

Hot finished welded type tubes

Quantity1173.15

Rate-

Amount -

Applying priming coat with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.

Quantity-

Rate-

Amount -

b. Copper wire 4sq.mm

Quantity22

Rate-

Amount -

Ordinary Rock

Quantity2345.6

Rate-

Amount -

Type A

Quantity1662

Rate-

Amount -

a. Medium point

Quantity6

Rate-

Amount -

b. With 2.5 mm2 copper cable s/core

Quantity1290

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for

Quantity-

Rate-

Amount -

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931

Quantity-

Rate-

Amount -

Two or more coats on new work

Quantity466.3

Rate-

Amount -

r. Bulk head fitting with all accessories

Quantity1

Rate-

Amount -

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:

Quantity-

Rate-

Amount -

BOYS HOSTEL GROUND FLOOR CIVIL

Quantity-

Rate-

Amount -

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the direction of Engineer-in-Charge. (Cost of aluminium snap beading shall be paid in basic item)

Quantity-

Rate-

Amount -

Supplying, installing, testing and commissioning optical type smoke detector complete on box as per specification no. FFFAS/ SD

Quantity14

Rate-

Amount -

Fixed to opening/ wooden frames with rawl plugs screws etc.

Quantity126.36

Rate-

Amount -

Hot Rolled deformed bars

Quantity5402.42

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for

Quantity-

Rate-

Amount -

0.50 mm thick

Quantity1653

Rate-

Amount -

Supply and Installation Fire Alarm Control Panel

Quantity1

Rate-

Amount -

All kind of Soil

Quantity15.18

Rate-

Amount -

Twin rubber stopper

Quantity10

Rate-

Amount -

e. 100 Sq.mm Al. LT. Power Cable

Quantity20

Rate-

Amount -

e. With 10mm2 copper cable s/core

Quantity1380

Rate-

Amount -

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work upto Plinth Level

Quantity-

Rate-

Amount -

Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:

Quantity-

Rate-

Amount -

15 mm cement plaster on the rough side of single or half brick wall of mix:

Quantity-

Rate-

Amount -

f. MCB Box 10 ways

Quantity1

Rate-

Amount -

Fixing & Providing, Drilling holes and connection etc

Quantity-

Rate-

Amount -

Supplying and erecting G.I. pipe ‘C’ class ERW 100 mm Dia with necessary fittings duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-PP

Quantity1410

Rate-

Amount -

1:4 (1 cement: 4 coarse sand)

Quantity79.68

Rate-

Amount -

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing.

Quantity-

Rate-

Amount -

(1 cement: 3 fine sand)

Quantity891.74

Rate-

Amount -

12 mm cement plaster finished with a floating coat of neat cement of mix:

Quantity-

Rate-

Amount -

Supply and Installation Butterfly valve

Quantity2

Rate-

Amount -

c. MCB 20A

Quantity20

Rate-

Amount -

a. MCB 10A

Quantity9

Rate-

Amount -

Supply and Installation Fire Alarm Control Panel

Quantity1

Rate-

Amount -

Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in-Charge.

Quantity11.88

Rate-

Amount -

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level

Quantity-

Rate-

Amount -

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade:

Quantity-

Rate-

Amount -

Concealed work, including cutting chases and making good the walls etc.

Quantity-

Rate-

Amount -

W.C. pan with ISI marked black solid plastic seat and lid

Quantity3

Rate-

Amount -

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having thermal stability for hot & cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer-in-charge

Quantity-

Rate-

Amount -

Providing and fixing 75mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete

Quantity57.5

Rate-

Amount -

Single half stall urinal with 5 litre P.V.C. automatic flushing cistern

Quantity12

Rate-

Amount -

o. Bulk head fitting with all accessories

Quantity1

Rate-

Amount -

Ordinary or Hard Rock

Quantity49.03

Rate-

Amount -

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work upto Plinth Level 1:3:6 (1 Cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size)

Quantity-

Rate-

Amount -

Prime Coat over WMM / WBM

Quantity-

Rate-

Amount -

Painting with synthetic enamel paint of approval brand and manufacture to give an even shade

Quantity-

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic excavator/Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge

Quantity-

Rate-

Amount -

Lintels, Beams, Plinth beams, Girders, Bressumers & Cantilevers

Quantity765.5

Rate-

Amount -

1:4 (1 cement: 4 coarse sand)

Quantity479.61

Rate-

Amount -

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Quantity-

Rate-

Amount -

a. Earthing complete set with copper plate 2x2x4 mm thick including charcoal,salt etc.as required. The depth of the pit shall be atleast 3m or as per moisture availability.

Quantity2

Rate-

Amount -

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the direction of Engineer-in-Charge. (Cost of aluminium snap beading shall be paid in basic item)

Quantity-

Rate-

Amount -

o. Bulk head fitting with all accessories

Quantity1

Rate-

Amount -

12 mm thick one side prelaminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1 medium density, flat pressed, three layer particle board FPT I or graded wood particle board FPT-1 IS: 3087 - bonded with BWP type synthetic resin adhesive as per IS: 848 and prelamination conforming to IS: 12823 Grade 1, Type II marked

Quantity20.69

Rate-

Amount -

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing.

Quantity-

Rate-

Amount -

c. with 4 mm2 copper cable s/core

Quantity1100

Rate-

Amount -

Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS: 14616 and TADS 15:2001 (Part 8) fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer-incharge and panelling with panels of: (Note: screws shall be paid seperately) Butt hinges and necessary12 mm thick one side prelaminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1 medium density, flat pressed, three layer particle board FPT I or graded wood particle board FPT-1 IS: 3087 - bonded with BWP type synthetic resin adhesive as per IS: 848 and prelamination conforming to IS: 12823 Grade 1, Type II marked

Quantity-

Rate-

Amount -

h. Main Switch 100A

Quantity1

Rate-

Amount -

Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:

Quantity-

Rate-

Amount -

h. Main Switch 100A

Quantity1

Rate-

Amount -

Providing and fixing square-mouth S.W. gully trap class SP -1 complete with C.I. grating brick masonry chamber with watertight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:

Quantity-

Rate-

Amount -

f. MCB Box 10 ways

Quantity1

Rate-

Amount -

Twin rubber stopper

Quantity10

Rate-

Amount -

a. Light point Short

Quantity7

Rate-

Amount -

a. Light point Short

Quantity7

Rate-

Amount -

1:3:6 (1 Cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size)

Quantity3.13

Rate-

Amount -

Dark shade pigment using ordinary cement

Quantity14.6

Rate-

Amount -

White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Quantity2

Rate-

Amount -

100x75x4 mm

Quantity30

Rate-

Amount -

35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Quantity11.03

Rate-

Amount -

With ready mix pink or gray of approved brand manufacture on wood work ( hard and soft wood)

Quantity30.24

Rate-

Amount -

b. Long point

Quantity5

Rate-

Amount -

BOYS HOSTEL FIRST FLOOR CIVIL

Quantity-

Rate-

Amount -

r. Bulk head fitting with all accessories

Quantity1

Rate-

Amount -

GIRLS HOSTEL GROUND FLOOR PLUMBING

Quantity-

Rate-

Amount -

e. Fan point medium

Quantity9

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic excavator/Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge

Quantity-

Rate-

Amount -

0.50 mm thick

Quantity50.16

Rate-

Amount -

f. Exhaust fan point medium

Quantity6

Rate-

Amount -

With ready mix pink or gray of approved brand manufacture on wood work ( hard and soft wood)

Quantity25.2

Rate-

Amount -

With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm)

Quantity71.49

Rate-

Amount -

Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS: 14616 and TADS 15:2001 (Part 8) fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer-incharge and panelling with panels of: (Note: screws shall be paid seperately) Butt hinges and necessary12 mm thick one side prelaminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1 medium density, flat pressed, three layer particle board FPT I or graded wood particle board FPT-1 IS: 3087 - bonded with BWP type synthetic resin adhesive as per IS: 848 and prelamination conforming to IS: 12823 Grade 1, Type II marked

Quantity-

Rate-

Amount -

FIREFIGHTING FIRST FLOOR

Quantity-

Rate-

Amount -

Stone tile work for wall lining upto 10 m height with special adhesive over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shades.

Quantity-

Rate-

Amount -

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litter low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:

Quantity-

Rate-

Amount -

Stone tile work for wall lining upto 10 m height with special adhesive over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shades.

Quantity-

Rate-

Amount -

Size of Tile 600x600 mm

Quantity110.63

Rate-

Amount -

i. Angle holder

Quantity3

Rate-

Amount -

Second class teak wood

Quantity0.33

Rate-

Amount -

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z-sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia in size, including necessary filling up the gaps at junctions 1.e at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawing and the direction of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for seperately)

Quantity-

Rate-

Amount -

Marble stone flooring with 18mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with:

Quantity-

Rate-

Amount -

m. Call Bell Ding Dong

Quantity12

Rate-

Amount -

Concealed work, including cutting chases and making good the walls etc.

Quantity-

Rate-

Amount -

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work upto Plinth Level

Quantity-

Rate-

Amount -

Udaipur green marble

Quantity119.56

Rate-

Amount -

Size of Tile 600x600 mm

Quantity48.38

Rate-

Amount -

o. Exhaust fan with all accessories

Quantity18

Rate-

Amount -

Energy Meter

Quantity2

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic excavator/Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge

Quantity-

Rate-

Amount -

Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS: 14616 and TADS 15:2001 (Part 8) fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer-in charge and panelling with panels of: (Note: screws shall be paid separately) Butt hinges and necessary

Quantity-

Rate-

Amount -

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:

Quantity-

Rate-

Amount -

f. Exhaust fan point medium

Quantity4

Rate-

Amount -

Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15):

Quantity25.92

Rate-

Amount -

d. With 6mm2 copper cable s/core

Quantity1250

Rate-

Amount -

250x16 mm

Quantity102

Rate-

Amount -

m. Bracket holder

Quantity13

Rate-

Amount -

e. Fan point medium

Quantity26

Rate-

Amount -

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Quantity-

Rate-

Amount -

15 mm nominal bore

Quantity1

Rate-

Amount -

Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

Quantity-

Rate-

Amount -

Wall painting with Acrylic emulsion paint, having VOC (Volatile organic compound) content less than 50 gm/litre, of approved brand and manufacturer, including applying additional coats wherever required, to achieve even shade and colour.

Quantity-

Rate-

Amount -

Half brick masonry with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.

Quantity-

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic excavator/Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge

Quantity-

Rate-

Amount -

Providing and fixing white vitreous China flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS: 2556, C.1. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required:

Quantity-

Rate-

Amount -

b. Long point

Quantity50

Rate-

Amount -

External work

Quantity-

Rate-

Amount -

Stone tile work for wall lining upto 10 m height with special adhesive over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shades.

Quantity-

Rate-

Amount -

d. Isolator 40 Amp 2 pole

Quantity1

Rate-

Amount -

Providing and fixing white vitreous China pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:

Quantity-

Rate-

Amount -

q. Call Bell Ding Dong

Quantity2

Rate-

Amount -

Providing 10mm thick plaster of Paris (gypsum anhydrous) ceiling upto a height of 5m above floor level, over first class kail wood strips 25x6mm with 10mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be paid separately):

Quantity-

Rate-

Amount -

Providing and fixing 75mmdia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete

Quantity50.58

Rate-

Amount -

All kind of Soil

Quantity15.18

Rate-

Amount -

a. Medium point

Quantity40

Rate-

Amount -

By Manual Means

Quantity-

Rate-

Amount -

h. Pole

Quantity28

Rate-

Amount -

e. 100 Sq.mm Al. LT. Power Cable

Quantity20

Rate-

Amount -

25 mm thick

Quantity28.98

Rate-

Amount -

Fixing & Providing, Drilling holes and connection etc

Quantity-

Rate-

Amount -

Providing and fixing white vitreous China flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS: 2556, C.1. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required:

Quantity-

Rate-

Amount -

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

Quantity-

Rate-

Amount -

d. Isolator 40 Amp 2 pole

Quantity1

Rate-

Amount -

100x75x4 mm

Quantity30

Rate-

Amount -

35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Quantity11.03

Rate-

Amount -

Two Coats

Quantity2385.28

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic excavator/Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge

Quantity-

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for

Quantity-

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic excavator/Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge

Quantity-

Rate-

Amount -

d. Panel Board

Quantity1

Rate-

Amount -

Providing and fixing square-mouth S.W. gully trap class SP -1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:

Quantity-

Rate-

Amount -

Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS: 14616 and TADS 15:2001 (Part 8) fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer-incharge and panelling with panels of: (Note: screws shall be paid seperately) Butt hinges and necessary12 mm thick one side prelaminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1 medium density, flat pressed, three layer particle board FPT I or graded wood particle board FPT-1 IS: 3087 - bonded with BWP type synthetic resin adhesive as per IS: 848 and prelamination conforming to IS: 12823 Grade 1, Type II marked

Quantity-

Rate-

Amount -

1:1.5:3 (1 Cement: 1.5 coarse sand 3 graded stone aggregate 20 mm nominal size)

Quantity0.59

Rate-

Amount -

With common burnt clay F.P.S. (non-modular) bricks of class designation 7.5

Quantity1

Rate-

Amount -

Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS: 14616 and TADS 15:2001 (Part 8) fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer-incharge and panelling with panels of: (Note: screws shall be paid seperately) Butt hinges and necessary12 mm thick one side prelaminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1 medium density, flat pressed, three layer particle board FPT I or graded wood particle board FPT-1 IS: 3087 - bonded with BWP type synthetic resin adhesive as per IS: 848 and prelamination conforming to IS: 12823 Grade 1, Type II marked

Quantity-

Rate-

Amount -

Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Quantity1793.05

Rate-

Amount -

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand):

Quantity-

Rate-

Amount -

e. With 10mm2 copper cable s/core

Quantity330

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic excavator/Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge

Quantity-

Rate-

Amount -

Second class Teak wood

Quantity-

Rate-

Amount -

a. MCB 10A

Quantity8

Rate-

Amount -

35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Quantity33.08

Rate-

Amount -

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 Cement: 3 Coarse sand), jointing with Grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc., complete

Quantity-

Rate-

Amount -

With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Quantity3640.76

Rate-

Amount -

b. Long point

Quantity6

Rate-

Amount -

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

Quantity-

Rate-

Amount -

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Quantity5498.04

Rate-

Amount -

125 mm

Quantity28

Rate-

Amount -

b. MCB 16A

Quantity9

Rate-

Amount -

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 Cement: 3 Coarse sand), jointing with Grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc., complete

Quantity-

Rate-

Amount -

40 mm nominal outer dia Pipes

Quantity205

Rate-

Amount -

d. Bus-Bar 100A 4 strips

Quantity1

Rate-

Amount -

Supplying and installing Energy Meter

Quantity2

Rate-

Amount -

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing.

Quantity-

Rate-

Amount -

50 mm nominal outer dia Pipes

Quantity18

Rate-

Amount -

Providing and laying in position ready mixed M25 grade concrete for RCC work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixture, manufactured as per Mix Design of specified Grade for RCC work, including pumping of RMC from transit mixer to site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including cost of admixtures in recommended proportions as per 15-9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in charge. (NOTE: Cement content considered in this item is @ 330 kg/cum. Excess or less cement used as per design mix is payable or recoverable separately)

Quantity-

Rate-

Amount -

d. Panel Board

Quantity2

Rate-

Amount -

For shutters of doors, windows, ventilators including providing and fixing hinges/pivots and making provision for fixing of fitting wherever required including the cost of EPDM rubber/ neoprene gasket required (Fitting shall be paid for seperately)

Quantity-

Rate-

Amount -

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level

Quantity-

Rate-

Amount -

b. Copper wire 4sq.mm

Quantity5

Rate-

Amount -

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 Cement: 3 Coarse sand), jointing with Grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc., complete

Quantity-

Rate-

Amount -

White Vitreous China Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Quantity14

Rate-

Amount -

Providing and fixing factory made P.V.C. door frame of size 50 * 47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15 * 15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19 * 19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided throughout the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer-in-Charge.

Quantity24.75

Rate-

Amount -

12 mm thick one side prelaminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1 medium density, flat pressed, three layer particle board FPT I or graded wood particle board FPT-1 IS: 3087 - bonded with BWP type synthetic resin adhesive as per IS: 848 and prelamination conforming to IS: 12823 Grade 1, Type II marked

Quantity1.89

Rate-

Amount -

Hot Rolled deformed bars

Quantity9549.35

Rate-

Amount -

250x16 mm

Quantity28

Rate-

Amount -

Fixing & Providing, Drilling holes and connection etc

Quantity-

Rate-

Amount -

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work upto Plinth Level

Quantity-

Rate-

Amount -

Granite stone of any colour and shade

Quantity25.84

Rate-

Amount -

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having thermal stability for hot & cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer-in-charge

Quantity-

Rate-

Amount -

Providing 10mm thick plaster of paris (gypsum anhydrous) ceiling upto a height of 5m above floor level, over first class kail wood strips 25x6mm with 10mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be pald separately):

Quantity-

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic excavator/Manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m.

Quantity-

Rate-

Amount -

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement: 4 coarse sand) C.I. cover with frame (light duty) 455 x 610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:1.5:3 mix (1 cement :1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement: 5 fine sand 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:

Quantity-

Rate-

Amount -

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.

Quantity42.81

Rate-

Amount -

Ordinary Rock

Quantity15.18

Rate-

Amount -

b. Light point Medium

Quantity7

Rate-

Amount -

f. MCB Box 10 ways

Quantity2

Rate-

Amount -

Tack Coat

Quantity-

Rate-

Amount -

Painting with synthetic enamel paint of approval brand and manufacture to give an even shade es

Quantity-

Rate-

Amount -

12 mm cement plaster of mix:

Quantity-

Rate-

Amount -

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level

Quantity-

Rate-

Amount -

Providing and Fixing Barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete.

Quantity763

Rate-

Amount -

Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality.

Quantity-

Rate-

Amount -

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion)

Quantity-

Rate-

Amount -

Supply and Installation ABC EXTINGUSHER

Quantity3

Rate-

Amount -

Providing and laying in position ready mixed M25 grade concrete for RCC work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixture, manufactured as per Mix Design of specified Grade for RCC work, including pumping of RMC from transit mixer to site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including cost of admixtures in recommended proportions as per 15-9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in charge. (NOTE: Cement content considered in this item is @ 330 kg/cum. Excess or less cement used as per design mix is payable or recoverable separately)

Quantity-

Rate-

Amount -

d. Call bell Point Long

Quantity1

Rate-

Amount -

Size of Tile 600x600 mm

Quantity171.61

Rate-

Amount -

Size of Tile 600x600 mm

Quantity10.95

Rate-

Amount -

12 mm cement plaster finished with floating coat of neat cement of mix

Quantity-

Rate-

Amount -

Size of Tile 600x600 mm

Quantity15.84

Rate-

Amount -

1:3:6 (1 Cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size)

Quantity3.13

Rate-

Amount -

g. MCB Box 12 ways

Quantity1

Rate-

Amount -

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand):

Quantity-

Rate-

Amount -

Providing and fixing ISI marked flush door shutters conforming to S: 2202 (part 1) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.

Quantity-

Rate-

Amount -

Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) i/c necessary excavation foundation concrete 1:5:10 ( 1 cement :5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 ( 1 cement :3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design.

Quantity-

Rate-

Amount -

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

Quantity-

Rate-

Amount -

a. Medium point

Quantity12

Rate-

Amount -

GIRLS HOSTEL FIRST FLOOR- INTERNAL ELECTRIFICATION

Quantity-

Rate-

Amount -

c. Light point Long

Quantity3

Rate-

Amount -

Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

Quantity-

Rate-

Amount -

Wiring with 3 pin 5A plug with single core copper cable 2.5 mm2 in surface casing capping i.e. providing and fixing anchor made 3 pin 5A socket outlet and 5aA flush type switches and earthing the third pin etc.

Quantity-

Rate-

Amount -

Applying priming coat

Quantity-

Rate-

Amount -

Providing and applying two coat of fire retardant paint on cleaned wood/ ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendation of manufacturer to make the surface fire retardant.

Quantity25.2

Rate-

Amount -

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion)

Quantity-

Rate-

Amount -

Supply and Installation Hooter

Quantity3

Rate-

Amount -

Brick on edge flooring with bricks of class designation 7.5 on a bed of 12mm cement mortar, including filling the joints with same mortar, with common burnt clay non-modular bricks:

Quantity-

Rate-

Amount -

Brick on edge flooring with bricks of class designation 7.5 on a bed of 12mm cement mortar, including filling the joints with same mortar, with common burnt clay non-modular bricks:

Quantity-

Rate-

Amount -

Providing and applying two coat of fire retardant paint on cleaned wood/ ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendation of manufacturer to make the surface fire retardant.

Quantity30.24

Rate-

Amount -

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z-sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia in size, including necessary filling up the gaps at junctions 1.e at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawing and the direction of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) For shutters of doors, windows, ventilators including providing and fixing hinges/pivots and making provision for fixing of fitting wherever required including the cost of EPDM rubber/ neoprene gasket required (Fitting shall be paid for seperately)

Quantity-

Rate-

Amount -

Wiring with 3 pin 15A plug with single core copper cable 4mm2 in surface casing capping i.e. providing and fixing anchor made 3 pin 15A socket outlet and 15A flush type switches and earthing the third pin etc.

Quantity-

Rate-

Amount -

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having thermal stability for hot & cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer-in-charge

Quantity-

Rate-

Amount -

f. Exhaust fan point medium

Quantity4

Rate-

Amount -

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 Cement 2 coarse sand 4 graded stone aggregate 12.5mm nominal size).

Quantity21.16

Rate-

Amount -

For shutters of doors, windows, ventilators including providing and fixing hinges/pivots and making provision for fixing of fitting wherever required including the cost of EPDM rubber/ neoprene gasket required (Fitting shall be paid for seperately)

Quantity-

Rate-

Amount -

c. Light point Long

Quantity2

Rate-

Amount -

All kind of Soil

Quantity73.54

Rate-

Amount -

With ready mix pink or gray of approved brand manufacture on wood work ( hard and soft wood)

Quantity5.04

Rate-

Amount -

f. With 1mm copper cable s/core for earth continuity

Quantity950

Rate-

Amount -

Steel work in built up tubular (round, square or rectangular hollow tubes etc) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

Quantity-

Rate-

Amount -

Tack Coat on Bituminous surfaces

Quantity-

Rate-

Amount -

b. Light point Medium

Quantity10

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic excavator/Manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m.

Quantity-

Rate-

Amount -

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:

Quantity-

Rate-

Amount -

1:3:6 (1 Cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size)

Quantity100.55

Rate-

Amount -

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.(ii) 2nd course of 20 mm cement plaster 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) 3rd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.(iv) 4th course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm)

Quantity104.34

Rate-

Amount -

Cement mortar 1:4 (1 cement : 4 coarse sand)

Quantity16.38

Rate-

Amount -

20 mm nominal outer dia Pipes

Quantity20.88

Rate-

Amount -

Stone tile work for wall lining upto 10 m height with special adhesive over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shades.

Quantity-

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for

Quantity-

Rate-

Amount -

Painting with synthetic enamel paint of approval brand and manufacture to give an even shade

Quantity-

Rate-

Amount -

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litter low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:

Quantity-

Rate-

Amount -

b. Long point

Quantity4

Rate-

Amount -

c. MCB 20A

Quantity3

Rate-

Amount -

j. Bracket holder

Quantity3

Rate-

Amount -

Wiring with 3 pin 15A plug with single core copper cable 4mm2 in surface casing capping i.e. providing and fixing anchor made 3 pin 15A socket outlet and 15A flush type switches and earthing the third pin etc.

Quantity-

Rate-

Amount -

h. Main Switch 100A

Quantity2

Rate-

Amount -

b. With 2.5 mm2 copper cable s/core

Quantity1240

Rate-

Amount -

Providing and laying in position ready mixed M25 grade concrete for RCC work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixture, manufactured as per Mix Design of specified Grade for RCC work, including pumping of RMC from transit mixer to site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including cost of admixtures in recommended proportions as per 15-9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in charge. (NOTE: Cement content considered in this item is @ 330 kg/cum. Excess or less cement used as per design mix is payable or recoverable separately)

Quantity-

Rate-

Amount -

12 mm cement plaster finished with floating coat of neat cement of mix

Quantity-

Rate-

Amount -

k. Change over Switch 100A

Quantity1

Rate-

Amount -

b. Long point

Quantity40

Rate-

Amount -

12 mm cement plaster of mix:

Quantity-

Rate-

Amount -

BOYS HOSTEL FIRST FLOOR PLUMBING

Quantity-

Rate-

Amount -

Two Coats

Quantity1151.48

Rate-

Amount -

d. With 6mm2 copper cable s/core

Quantity300

Rate-

Amount -

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work upto Plinth Level

Quantity-

Rate-

Amount -

6 mm cement plaster of mix:

Quantity-

Rate-

Amount -

Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement: 2 Coarse sand) to match the existing floor.

Quantity-

Rate-

Amount -

o. Exhaust fan with all accessories

Quantity6

Rate-

Amount -

f. Exhaust fan point medium

Quantity6

Rate-

Amount -

d. Call bell Point Long

Quantity1

Rate-

Amount -

a. With 1.5 mm2 copper cable s/core

Quantity3550

Rate-

Amount -

Twin rubber stopper

Quantity14

Rate-

Amount -

With F. P. S. (non-modular) bricks

Quantity94.34

Rate-

Amount -

BOYS HOSTEL GROUND FLOOR PLUMBING

Quantity-

Rate-

Amount -

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having thermal stability for hot & cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer-in-charge

Quantity-

Rate-

Amount -

Wall painting with Acrylic emulsion paint, having VOC (Volatile organic compound) content lesss than 50 gm/liter, of approved brand and manufacturer, including applying additional coats wherever required, to achieve even shade and colour.

Quantity-

Rate-

Amount -

External work

Quantity-

Rate-

Amount -

Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15):

Quantity153.9

Rate-

Amount -

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand):

Quantity-

Rate-

Amount -

UNDER GROUND TANK

Quantity-

Rate-

Amount -

12 mm thick one side prelaminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1 medium density, flat pressed, three layer particle board FPT I or graded wood particle board FPT-1 IS: 3087 - bonded with BWP type synthetic resin adhesive as per IS: 848 and prelamination conforming to IS: 12823 Grade 1, Type II marked

Quantity14.28

Rate-

Amount -

Fixed to opening/ wooden frames with rawl plugs screws etc.

Quantity64.8

Rate-

Amount -

n. Call Bell Ding Dong

Quantity1

Rate-

Amount -

100x75x4 mm

Quantity153

Rate-

Amount -

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand):

Quantity-

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form work for:

Quantity-

Rate-

Amount -

Providing & fixing, drilling holes and connection etc.

Quantity-

Rate-

Amount -

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-Charge. (Note: Butt hinges and necessary screws shall be paid seperately)

Quantity-

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic excavator/Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge

Quantity-

Rate-

Amount -

W.C. pan with ISI marked black solid plastic seat and lid

Quantity3

Rate-

Amount -

p. LED bulb 9w

Quantity15

Rate-

Amount -

Columns, Pillars, Piers, Abutments, Posts & Struts

Quantity940.31

Rate-

Amount -

Providing and laying bituminous macadam with higher capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction

Quantity83.1

Rate-

Amount -

1:1.5:3 (1 Cement: 1.5 coarse sand 3 graded stone aggregate 20 mm nominal size)

Quantity0.88

Rate-

Amount -

Providing and fixing 75mmdia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete

Quantity50.58

Rate-

Amount -

l. Exhaust fan with all accessories

Quantity4

Rate-

Amount -

Wiring with 3 pin 5A plug with single core copper cable 2.5 mm2 in surface casing capping i.e. providing and fixing anchor made 3 pin 5A socket outlet and 5aA flush type switches and earthing the third pin etc.

Quantity-

Rate-

Amount -

Second class Teak wood

Quantity-

Rate-

Amount -

Second class teak wood

Quantity0.33

Rate-

Amount -

100x75x4 mm

Quantity42

Rate-

Amount -

All Kinds of soil

Quantity44.12

Rate-

Amount -

e. TPN 100A

Quantity1

Rate-

Amount -

Providing and fixing 75mmdia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete

Quantity18.9

Rate-

Amount -

125 mm

Quantity20

Rate-

Amount -

Providing and fixing white vitreous China pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked black solid plastic seat and lid

Quantity-

Rate-

Amount -

j. TPN 100A

Quantity2

Rate-

Amount -

Providing Zinc Aluminium Alloy Galvanized coloured trapezoidal profile steel (width 1120 mm) (DYNA, DURASHINE, BLUESCOPE etc) complete (upto a pitch of 60 degrees) excluding the cost of purlins, rafters and trusses.

Quantity-

Rate-

Amount -

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931

Quantity-

Rate-

Amount -

GROUND FLOOR- INTERNAL ELECTRIFICATION

Quantity-

Rate-

Amount -

Bituminous Macadam Grading -II

Quantity-

Rate-

Amount -

d. Isolator 40 Amp 2 pole

Quantity2

Rate-

Amount -

c. Lightning arrester

Quantity1

Rate-

Amount -

Supplying, installing, testing and commissioning optical type smoke detector complete on box as per specification no. FFFAS/ SD

Quantity14

Rate-

Amount -

Made of G.I wire of dia 4mm

Quantity1373.4

Rate-

Amount -

Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sum using mechanical means.

Quantity1662

Rate-

Amount -

Bituminous Macadam Grading -I

Quantity-

Rate-

Amount -

12 mm cement plaster of mix:

Quantity-

Rate-

Amount -

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having thermal stability for hot & cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge

Quantity-

Rate-

Amount -

Udaipur green marble

Quantity131.04

Rate-

Amount -

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work upto Plinth Level 1:3:6 (1 Cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size)

Quantity-

Rate-

Amount -

Wiring with 1.5 mm2 single core copper cable in surface casing capping i.e. providing and fixing anchor made 5A flush type switches and all other accessories

Quantity-

Rate-

Amount -

1:6 (1 cement :6 Coarse sand)

Quantity179.19

Rate-

Amount -

c. Lightning arrester

Quantity1

Rate-

Amount -

Cement mortar 1:4 (1 cement : 4 coarse sand)

Quantity16.38

Rate-

Amount -

b. MCB 16A

Quantity12

Rate-

Amount -

Wall painting with Acrylic emulsion paint, having VOC (Volatile organic compound) content lesss than 50 gm/liter, of approved brand and manufacturer, including applying additional coats wherever required, to achieve even shade and colour.

Quantity-

Rate-

Amount -

1:4 (1 cement :4 Fine sand)

Quantity29.12

Rate-

Amount -

With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Quantity299.16

Rate-

Amount -

b. Long point

Quantity40

Rate-

Amount -

In cement mortar

Quantity31.02

Rate-

Amount -

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Quantity-

Rate-

Amount -

12 mm cement plaster of mix:

Quantity-

Rate-

Amount -

With common burnt clay F.P.S. (non-modular) bricks of class designation 7.5

Quantity5

Rate-

Amount -

c. Light point Long

Quantity20

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for

Quantity-

Rate-

Amount -

Lintels, Beams, Plinth beams, Girders, Bressumers & Cantilevers

Quantity3332.76

Rate-

Amount -

Fixed to Opening / wooden frames with rawl plugs screws etc

Quantity304.56

Rate-

Amount -

Single half stall urinal with 5 litre P.V.C. automatic flushing cistern

Quantity3

Rate-

Amount -

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931

Quantity-

Rate-

Amount -

250x16 mm

Quantity106

Rate-

Amount -

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Quantity1

Rate-

Amount -

SEPTIC TANK 3

Quantity-

Rate-

Amount -

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.(ii) 2nd course of 20 mm cement plaster 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) 3rd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.(iv) 4th course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm)

Quantity24.6

Rate-

Amount -

12 mm cement plaster finished with floating coat of neat cement of mix

Quantity-

Rate-

Amount -

20 mm cement plaster of mix:

Quantity-

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form work for:

Quantity-

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic excavator/Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge

Quantity-

Rate-

Amount -

All kind of Soil

Quantity863.82

Rate-

Amount -

With common burnt clay F.P.S. (non-modular) bricks of class designation 7.5

Quantity1

Rate-

Amount -

f. With 1mm copper cable s/core for earth continuity

Quantity790

Rate-

Amount -

c. with 4 mm2 copper cable s/core

Quantity2000

Rate-

Amount -

125 mm

Quantity102

Rate-

Amount -

35mm thick shutters

Quantity33.6

Rate-

Amount -

20 mm cement plaster of mix:

Quantity-

Rate-

Amount -

m. LED bulb 9w

Quantity3

Rate-

Amount -

Two Coats

Quantity179.19

Rate-

Amount -

Planting of trees by the road side (Avenue trees) in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, planting the saplings, backfilling the trench, watering, fixing the tree guard and maintaining the plants for one year

Quantity140

Rate-

Amount -

Painting with synthetic enamel paint of approval brand and manufacture to give an even shade es

Quantity-

Rate-

Amount -

Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS: 14616 and TADS 15:2001 (Part 8) fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer-incharge and panelling with panels of: (Note: screws shall be paid seperately) Butt hinges and necessary

Quantity-

Rate-

Amount -

Ordinary Rock

Quantity12.38

Rate-

Amount -

c. Main Switch 100A

Quantity1

Rate-

Amount -

Size of Tile 600x600 mm

Quantity891.74

Rate-

Amount -

Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) i/c necessary excavation foundation concrete 1:5:10 ( 1 cement :5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 ( 1 cement :3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design.

Quantity-

Rate-

Amount -

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge.

Quantity-

Rate-

Amount -

h. Main Switch 100A

Quantity1

Rate-

Amount -

12 mm cement plaster finished with floating coat of neat cement of mix

Quantity-

Rate-

Amount -

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.

Quantity41.2

Rate-

Amount -

All works upto Plinth level

Quantity430.21

Rate-

Amount -

20 mm nominal outer dia Pipes

Quantity171

Rate-

Amount -

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

Quantity-

Rate-

Amount -

Providing and fixing square-mouth S.W. gully trap class SP -1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:

Quantity-

Rate-

Amount -

GIRLS HOSTEL FIRST FLOOR PLUMBING

Quantity-

Rate-

Amount -

Providing and fixing factory made P.V.C. door frame of size 50 * 47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15 * 15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19 * 19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided throughout the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer-in-Charge.

Quantity34.65

Rate-

Amount -

n. Bulk head fitting with all accessories

Quantity6

Rate-

Amount -

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:

Quantity-

Rate-

Amount -

200 * 10mm

Quantity10

Rate-

Amount -

1:3:6 (1 Cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size)

Quantity63.18

Rate-

Amount -

Reinforced cement concrete work in walls (any thickness), Including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upto floor five level excluding cost of centering, shuttering, finishing and reinforcement.

Quantity-

Rate-

Amount -

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

Quantity235.01

Rate-

Amount -

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:

Quantity-

Rate-

Amount -

Planting of Trees and their Maintenance for one Year

Quantity-

Rate-

Amount -

Tree Guard with MS Angle Iron and Steel Wire

Quantity-

Rate-

Amount -

Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:

Quantity-

Rate-

Amount -

With ready mix pink or gray of approved brand manufacture on wood work ( hard and soft wood)

Quantity5.04

Rate-

Amount -

0.50 mm thick

Quantity21.12

Rate-

Amount -

Hot Rolled deformed bars

Quantity100

Rate-

Amount -

k. LED Double tube light fitting 2x40wx4 with all accessories

Quantity8

Rate-

Amount -

a. With 1.5 mm2 copper cable s/core

Quantity3500

Rate-

Amount -

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Quantity5229.3

Rate-

Amount -

Hot finished welded type tubes

Quantity5621.73

Rate-

Amount -

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 Cement: 3 Coarse sand), jointing with Grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc., complete

Quantity-

Rate-

Amount -

W.C. pan with ISI marked black solid plastic seat and lid

Quantity7

Rate-

Amount -

c. Lightning arrester

Quantity2

Rate-

Amount -

p. LED bulb 9w

Quantity5

Rate-

Amount -

W.C. pan with ISI marked black solid plastic seat and lid

Quantity1

Rate-

Amount -

1:1.5:3 (1 Cement: 1.5 coarse sand 3 graded stone aggregate 20 mm nominal size)

Quantity0.88

Rate-

Amount -

White Vitreous China Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Quantity14

Rate-

Amount -

Hot Rolled deformed bars

Quantity4600.8

Rate-

Amount -

Providing Zinc Aluminium Alloy Galvanized coloured trapezoidal profile steel (width 1120 mm) (DYNA, DURASHINE, BLUESCOPE etc) complete (upto a pitch of 60 degrees) excluding the cost of purlins, rafters and trusses.

Quantity-

Rate-

Amount -

l. LED bulb 9w

Quantity15

Rate-

Amount -

Lintels, Beams, Plinth beams, Girders, Bressumers & Cantilevers

Quantity811.97

Rate-

Amount -

6 mm cement plaster of mix:

Quantity-

Rate-

Amount -

Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked materials.

Quantity-

Rate-

Amount -

a. MCB 10A

Quantity40

Rate-

Amount -

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level

Quantity-

Rate-

Amount -

New work ( Two or more coats) over and including priming coat with water thinnable cement primer

Quantity1086.58

Rate-

Amount -

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

Quantity-

Rate-

Amount -

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the direction of Engineer-in-Charge. (Cost of aluminium snap beading shall be paid in basic item)

Quantity-

Rate-

Amount -

External work

Quantity-

Rate-

Amount -

Armed cable for Main 4 core X 35 Sqmm for Building

Quantity90

Rate-

Amount -

100x75x4 mm

Quantity147

Rate-

Amount -

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Quantity23000

Rate-

Amount -

25 mm thick

Quantity28.98

Rate-

Amount -

(1 cement: 3 fine sand)

Quantity942.5

Rate-

Amount -

Ordinary Rock

Quantity681.05

Rate-

Amount -

Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) as per standard design.

Quantity-

Rate-

Amount -

k. Exhaust fan with all accessories

Quantity18

Rate-

Amount -

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having thermal stability for hot & cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge

Quantity-

Rate-

Amount -

8mm thick (mirror polished and machine cut edge)

Quantity-

Rate-

Amount -

30mm thick shutters

Quantity2.52

Rate-

Amount -

Wiring for circuit/sub-main with PVC insulated copper cable core in surface casing capping etc.

Quantity-

Rate-

Amount -

Inside dimensions 600x850 mm and 45 cm deep for single pipe line.

Quantity-

Rate-

Amount -

8mm thick (mirror polished and machine cut edge)

Quantity-

Rate-

Amount -

Granite stone of any colour and shade

Quantity2.3

Rate-

Amount -

a. Medium point

Quantity4

Rate-

Amount -

Two or more coats on new work

Quantity550.33

Rate-

Amount -

Providing and fixing 75mmdia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete

Quantity57.5

Rate-

Amount -

Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement: 2 Coarse sand) to match the existing floor. With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Quantity-

Rate-

Amount -

Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25 mm to 40 mm from face of wall a fixing with clips of approved quality and One Number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 years or any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete.

Quantity526

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for

Quantity-

Rate-

Amount -

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement: 4 coarse sand) C.I. cover with frame (light duty) 455 x 610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:1.5:3 mix (1 cement :1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement: 5 fine sand 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:

Quantity-

Rate-

Amount -

Hot Rolled deformed bars

Quantity27637.28

Rate-

Amount -

Armed cable for Main 4 core X 35 Sqmm for Building

Quantity50

Rate-

Amount -

(1 cement: 3 fine sand)

Quantity264.5

Rate-

Amount -

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Quantity-

Rate-

Amount -

0.50 mm thick

Quantity382.02

Rate-

Amount -

For shutters of doors, windows, ventilators including providing and fixing hinges/pivots and making provision for fixing of fitting wherever required including the cost of EPDM rubber/ neoprene gasket required (Fitting shall be paid for seperately)

Quantity-

Rate-

Amount -

Providing & fixing, drilling holes and connection etc.

Quantity-

Rate-

Amount -

SEPTIC TANK 1

Quantity-

Rate-

Amount -

Painting with synthetic enamel paint of approval brand and manufacture to give an even shade es

Quantity-

Rate-

Amount -

Coursed rubble masonry (first or second sort) with hard stone In super structure above plinth level and upto floor five level:

Quantity-

Rate-

Amount -

Applying priming coat

Quantity-

Rate-

Amount -

Fixed to Opening / wooden frames with rawl plugs screws etc

Quantity272.16

Rate-

Amount -

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:

Quantity-

Rate-

Amount -

GIRLS HOSTEL GROUND FLOOR- INTERNAL ELECTRIFICATION

Quantity-

Rate-

Amount -

Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15):

Quantity711.18

Rate-

Amount -

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931

Quantity-

Rate-

Amount -

Providing and fixing ISI marked flush door shutters conforming to S: 2202 (part 1) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.

Quantity-

Rate-

Amount -

Brick on edge flooring with bricks of class designation 7.5 on a bed of 12mm cement mortar, including filling the joints with same mortar, with common burnt clay non-modular bricks:

Quantity-

Rate-

Amount -

Reinforced cement concrete work in walls (any thickness), Including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upto floor five level excluding cost of centering, shuttering, finishing and reinforcement.

Quantity-

Rate-

Amount -

Reinforced cement concrete work in walls (any thickness), Including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upto floor five level excluding cost of centering, shuttering, finishing and reinforcement.

Quantity-

Rate-

Amount -

Supplying and erecting G.I. pipe ‘C’ class ERW 100 mm Dia with necessary fittings duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-PP

Quantity1443

Rate-

Amount -

Providing and applying two coat of fire retardant paint on cleaned wood/ ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendation of manufacturer to make the surface fire retardant.

Quantity5.04

Rate-

Amount -

Providing and applying two coat of fire retardant paint on cleaned wood/ ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendation of manufacturer to make the surface fire retardant.

Quantity5.04

Rate-

Amount -

Half brick masonry with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.

Quantity-

Rate-

Amount -

1:4 (1 cement: 4 coarse sand)

Quantity4.35

Rate-

Amount -

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore

Quantity2

Rate-

Amount -

Armed cable for Main 4 core X 10 Sqmm for Building

Quantity120

Rate-

Amount -

n. LED Double tube light fitting 2x40wx4 with all accessories

Quantity12

Rate-

Amount -

a. Earthing complete set with copper plate 2x2x4 mm thick including charcoal, salt etc.as required. The depth of the pit shall be atleast 3m or as per moisture availability.

Quantity1

Rate-

Amount -

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931

Quantity-

Rate-

Amount -

Wiring with 1.5 mm2 single core copper cable in surface casing capping i.e. providing and fixing anchor made 5A flush type switches and all other accessories

Quantity-

Rate-

Amount -

Udaipur green marble

Quantity43.2

Rate-

Amount -

Size of Tile 600x600 mm

Quantity264.5

Rate-

Amount -

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Quantity11000

Rate-

Amount -

Supplying, erecting, testing and commissioning of diesel generating set with alternator of 30 kVA output continuous rating, 3 phase, 415 V, 50 Hz, 0.8 p.f., A.C. supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %, with performance class G2/G3 and maximum fuel consumption 5.9 ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads, with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel not less than 65 ltr etc., as per specification

Quantity1

Rate-

Amount -

Hot finished welded type tubes

Quantity193.2

Rate-

Amount -

1:6 (1 cement :6 Coarse sand)

Quantity257.47

Rate-

Amount -

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.

Quantity351.12

Rate-

Amount -

Inside dimensions 600x850 mm and 45 cm deep for single pipe line.

Quantity-

Rate-

Amount -

200 * 10mm

Quantity14

Rate-

Amount -

Supply and Installation Energy Meter

Quantity1

Rate-

Amount -

a. Earthing complete set with copper plate 2x2x4 mm thick including charcoal, salt etc.as required. The depth of the pit shall be at least 3m or as per moisture availability.

Quantity1

Rate-

Amount -

1:3:6 (1 Cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size)

Quantity66.27

Rate-

Amount -

a. Medium point

Quantity50

Rate-

Amount -

Applying priming coat with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.

Quantity-

Rate-

Amount -

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately)

Quantity-

Rate-

Amount -

35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Quantity7.88

Rate-

Amount -

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having thermal stability for hot & cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge

Quantity-

Rate-

Amount -

With common burnt clay F.P.S( non-modular ) bricks of class designation 7.5

Quantity3

Rate-

Amount -

a. Light point Short

Quantity25

Rate-

Amount -

20 mm cement plaster of mix:

Quantity-

Rate-

Amount -

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Quantity11000

Rate-

Amount -

c. with 4 mm2 copper cable s/core

Quantity920

Rate-

Amount -

Two Coats

Quantity257.47

Rate-

Amount -

All works above Plinth level upto floor V level

Quantity39.27

Rate-

Amount -

Lintels, Beams, Plinth beams, Girders, Bressumers & Cantilevers

Quantity146.71

Rate-

Amount -

With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Quantity1397

Rate-

Amount -

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately)

Quantity-

Rate-

Amount -

DEMOLITION AND RETROFITTING WORK OF EXISTING BLOCK

Quantity-

Rate-

Amount -

35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Quantity7.88

Rate-

Amount -

Cement mortar 1:6 (1 cement:6 coarse sand)

Quantity80.7

Rate-

Amount -

Size of Tile 600x600 mm

Quantity942.5

Rate-

Amount -

PLUMBING GROUND FLOOR

Quantity-

Rate-

Amount -

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand):

Quantity-

Rate-

Amount -

f. Exhaust fan point medium

Quantity18

Rate-

Amount -

Providing and fixing 110mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.

Quantity358.2

Rate-

Amount -

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.(ii) 2nd course of 20 mm cement plaster 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) 3rd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.(iv) 4th course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm)

Quantity24.6

Rate-

Amount -

1:6 (1 cement :6 Coarse sand)

Quantity257.47

Rate-

Amount -

q. Call Bell Ding Dong

Quantity12

Rate-

Amount -

All works upto Plinth level

Quantity10.3

Rate-

Amount -

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level

Quantity-

Rate-

Amount -

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand):

Quantity-

Rate-

Amount -

Twin rubber stopper

Quantity51

Rate-

Amount -

1:4 (1 cement :4 Fine sand)

Quantity18.72

Rate-

Amount -

a. Medium point

Quantity6

Rate-

Amount -

Granular Sub-Base Grading-I Material

Quantity124.65

Rate-

Amount -

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z-sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia in size, including necessary filling up the gaps at junctions 1.e at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawing and the direction of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for seperately)

Quantity-

Rate-

Amount -

Udaipur green marble

Quantity111.7

Rate-

Amount -

Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

Quantity-

Rate-

Amount -

200 * 10mm

Quantity14

Rate-

Amount -

Half brick masonry with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.

Quantity-

Rate-

Amount -

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore

Quantity5

Rate-

Amount -

Supplying and erecting ultra violet storage type water purifier ( RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water minimum 0.33 litre/min with activated carbon filter and softener operating on 230 V single phase A.C. supply with UV fail & filter change indication system .(for TDS more than 200)

Quantity2

Rate-

Amount -

Fixing & Providing, Drilling holes and connection etc

Quantity-

Rate-

Amount -

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:

Quantity-

Rate-

Amount -

With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Quantity380

Rate-

Amount -

Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

Quantity-

Rate-

Amount -

White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Quantity3

Rate-

Amount -

e. 100 Sq.mm Al. LT. Power Cable

Quantity150

Rate-

Amount -

8mm thick (mirror polished and machine cut edge)

Quantity-

Rate-

Amount -

Steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete above plinth level

Quantity-

Rate-

Amount -

Marble stone flooring with 18mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with:

Quantity-

Rate-

Amount -

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litter low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:

Quantity-

Rate-

Amount -

Providing and fixing 110mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.

Quantity6.6

Rate-

Amount -

Concealed work, including cutting chases and making good the walls etc.

Quantity-

Rate-

Amount -

1:3:6 (1 Cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size)

Quantity3.13

Rate-

Amount -

With F. P. S. (non-modular) bricks

Quantity93.97

Rate-

Amount -

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade:

Quantity-

Rate-

Amount -

Providing and fixing factory made P.V.C. door frame of size 50 * 47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15 * 15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19 * 19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided throughout the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer-in-Charge.

Quantity94.05

Rate-

Amount -

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.(ii) 2nd course of 20 mm cement plaster 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) 3rd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.(iv) 4th course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm)

Quantity83.06

Rate-

Amount -

Armed cable for Main 4 core X 10 Sqmm for Building

Quantity210

Rate-

Amount -

Supplying and erecting ultra violet storage type water purifier ( RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water minimum 0.33 litre/min with activated carbon filter and softener operating on 230 V single phase A.C. supply with UV fail & filter change indication system .(for TDS more than 200)

Quantity2

Rate-

Amount -

g. 60 watt LED for street Light

Quantity28

Rate-

Amount -

BOYS HOSTEL GROUND FLOOR- INTERNAL ELECTRIFICATION

Quantity-

Rate-

Amount -

External work

Quantity-

Rate-

Amount -

d. Isolator 40 Amp 2 pole

Quantity15

Rate-

Amount -

e. Isolator 63 Amp 2 pole

Quantity2

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic excavator/Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge

Quantity-

Rate-

Amount -

Providing and fixing 110mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.

Quantity6.6

Rate-

Amount -

e. With 10mm2 copper cable s/core

Quantity620

Rate-

Amount -

Supplying, erecting, testing & commissioning of 5 kVA capacity on line pure sine wave, PWM,IGBT based UPS with 0.8 to unity output pf ,single phase input & 1 phase output complete with all protections as per specification. (With batteries)

Quantity1

Rate-

Amount -

c. Light point Long

Quantity20

Rate-

Amount -

a. Light point Short

Quantity25

Rate-

Amount -

Providing and fixing ISI marked flush door shutters conforming to S: 2202 (part 1) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.

Quantity-

Rate-

Amount -

Ordinary Rock

Quantity12.38

Rate-

Amount -

Supplying and erecting ultra violet storage type water purifier ( RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water minimum 0.33 litre/min with activated carbon filter and softener operating on 230 V single phase A.C. supply with UV fail & filter change indication system .(for TDS more than 200)

Quantity2

Rate-

Amount -

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

Quantity-

Rate-

Amount -

Supply and Installation Manual Call Point

Quantity3

Rate-

Amount -

Inside dimensions 600x850 mm and 45 cm deep for single pipe line.

Quantity-

Rate-

Amount -

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore

Quantity21

Rate-

Amount -

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete:

Quantity-

Rate-

Amount -

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately)

Quantity-

Rate-

Amount -

With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Quantity1457.33

Rate-

Amount -

e. Isolator 63 Amp 2 pole

Quantity2

Rate-

Amount -

Providing and laying in-situ / ready mix M25 grade RCC jacketing work around the existing COLUMN, BEAM, SLAB etc.complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer with fine aggregates of required specifications ( VSI sand finely washed etc ), height of 8 to 10 meter)

Quantity68.67

Rate-

Amount -

With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Quantity380

Rate-

Amount -

Steel work in built up tubular (round, square or rectangular hollow tubes etc) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

Quantity-

Rate-

Amount -

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

Quantity-

Rate-

Amount -

With common burnt clay F.P.S. (non-modular) bricks of class designation 7.5

Quantity1

Rate-

Amount -

Wiring with 3 pin 15A plug with single core copper cable 4mm2 in surface casing capping i.e. providing and fixing anchor made 3 pin 15A socket outlet and 15A flush type switches and earthing the third pin etc.

Quantity-

Rate-

Amount -

Kota stone slab flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (1 cement: 4 coarse 25 mm thick

Quantity8.37

Rate-

Amount -

b. Long point

Quantity8

Rate-

Amount -

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand):

Quantity-

Rate-

Amount -

12 mm thick one side prelaminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1 medium density, flat pressed, three layer particle board FPT I or graded wood particle board FPT-1 IS: 3087 - bonded with BWP type synthetic resin adhesive as per IS: 848 and prelamination conforming to IS: 12823 Grade 1, Type II marked

Quantity39.69

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for

Quantity-

Rate-

Amount -

Granular Sub-Base Grading-III Material

Quantity124.65

Rate-

Amount -

Hot Rolled deformed bars

Quantity3120

Rate-

Amount -

20 mm nominal outer dia Pipes

Quantity20.88

Rate-

Amount -

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having thermal stability for hot & cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge

Quantity-

Rate-

Amount -

40 mm nominal outer dia Pipes

Quantity29.47

Rate-

Amount -

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:

Quantity-

Rate-

Amount -

8mm thick (mirror polished and machine cut edge)

Quantity-

Rate-

Amount -

250x16 mm

Quantity20

Rate-

Amount -

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z-sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia in size, including necessary filling up the gaps at junctions 1.e at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawing and the direction of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for seperately)

Quantity-

Rate-

Amount -

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work upto Plinth Level

Quantity-

Rate-

Amount -

Kota stone slab flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (1 cement: 4 coarse)

Quantity-

Rate-

Amount -

All works upto Plinth level

Quantity62.44

Rate-

Amount -

Hot Rolled deformed bars

Quantity100

Rate-

Amount -

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level

Quantity-

Rate-

Amount -

Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, racking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish of the dumping ground, all complete as per the direction of Engineer-in-charge

Quantity-

Rate-

Amount -

Applying priming coat

Quantity-

Rate-

Amount -

15 mm nominal bore

Quantity12

Rate-

Amount -

n. LED Double tube light fitting 2x40wx4 with all accessories

Quantity65

Rate-

Amount -

a. Earthing complete set with copper plate 2x2x4 mm thick including charcoal, salt etc.as required. The depth of the pit shall be atleast 3m or as per moisture availability.

Quantity2

Rate-

Amount -

Granular Sub-Base Grading-II Material

Quantity124.65

Rate-

Amount -

GIRLS HOSTEL GROUND FLOOR CIVIL

Quantity-

Rate-

Amount -

Hot Rolled deformed bars

Quantity37.5

Rate-

Amount -

Marble stone flooring with 18mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with:

Quantity-

Rate-

Amount -

r. Bulk head fitting with all accessories

Quantity6

Rate-

Amount -

l. Angle holder

Quantity6

Rate-

Amount -

GIRLS HOSTEL SEPTIC TANK

Quantity-

Rate-

Amount -

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth: consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m

Quantity4554.25

Rate-

Amount -

Applying priming coat with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.

Quantity-

Rate-

Amount -

Steel work in built up tubular (round, square or rectangular hollow tubes etc) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

Quantity-

Rate-

Amount -

b. Copper wire 4sq.mm

Quantity8

Rate-

Amount -

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade:

Quantity-

Rate-

Amount -

Compacting Original Ground Arounds Loosening of the ground upto a level of 500 mm below the sub grade level, watered, graded and compacted in layers to meet the requirement of table 300-2 for sub-grade construction

Quantity-

Rate-

Amount -

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work upto Plinth Level

Quantity-

Rate-

Amount -

With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Quantity706.66

Rate-

Amount -

Supplying and installing wall mounting swinging Hose reel drum fitted with 19 mm dia. 30 meter high pressure polypropylene (Polyhouse) long fitted with necessary accessories complete as per specification no. FF-FFA/HV

Quantity3

Rate-

Amount -

15 mm nominal bore

Quantity8

Rate-

Amount -

Half brick masonry with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.

Quantity-

Rate-

Amount -

g. MCB Box 12 ways

Quantity2

Rate-

Amount -

e. Isolator 63 Amp 2 pole

Quantity1

Rate-

Amount -

1:6 (1 cement :6 Coarse sand)

Quantity1463.17

Rate-

Amount -

Marble stone flooring with 18mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with:

Quantity-

Rate-

Amount -

g. MCB Box 12 ways

Quantity2

Rate-

Amount -

a. MCB 10A

Quantity40

Rate-

Amount -

b. Copper wire 4sq.mm

Quantity25

Rate-

Amount -

6 mm cement plaster of mix:

Quantity-

Rate-

Amount -

Wall painting with Acrylic emulsion paint, having VOC (Volatile organic compound) content less than 50 gm/liter, of approved brand and manufacturer, including applying additional coats wherever required, to achieve even shade and colour.

Quantity-

Rate-

Amount -

50 mm nominal outer dia Pipes

Quantity6.3

Rate-

Amount -

Size of Tile 600x600 mm

Quantity15.84

Rate-

Amount -

100x100 mm size P type

Quantity-

Rate-

Amount -

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth: consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m

Quantity1383.41

Rate-

Amount -

200 * 10mm

Quantity51

Rate-

Amount -

Columns, Pillars, Piers, Abutments, Posts & Struts

Quantity126

Rate-

Amount -

20 mm cement plaster of mix:

Quantity-

Rate-

Amount -

b. With 2.5 mm2 copper cable s/core

Quantity3800

Rate-

Amount -

e. Fan point medium

Quantity6

Rate-

Amount -

e. Isolator 63 Amp 2 pole

Quantity1

Rate-

Amount -

White Vitreous China Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Quantity1

Rate-

Amount -

j. LED Double tube light fitting 2x40wx4 with all accessories

Quantity65

Rate-

Amount -

Wiring with 3 pin 5A plug with single core copper cable 2.5 mm2 in surface casing capping i.e. providing and fixing anchor made 3 pin 5A socket outlet and 5aA flush type switches and earthing the third pin etc.

Quantity-

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic excavator/Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge

Quantity-

Rate-

Amount -

Columns, Pillars, Piers, Abutments, Posts & Struts

Quantity126

Rate-

Amount -

LD-2.5

Quantity-

Rate-

Amount -

With common burnt clay F.P.S. (non-modular) bricks of class designation 7.5

Quantity1

Rate-

Amount -

1:4 (1 cement :4 Fine sand)

Quantity29.12

Rate-

Amount -

h. Angle holder

Quantity15

Rate-

Amount -

1:3:6 (1 Cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size)

Quantity197.86

Rate-

Amount -

i. Bus-Bar 100A 4 strips

Quantity1

Rate-

Amount -

Armed cable for Main 4 core X 10 Sqmm for Street light

Quantity400

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for

Quantity-

Rate-

Amount -

With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm)

Quantity21.95

Rate-

Amount -

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.(ii) 2nd course of 20 mm cement plaster 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) 3rd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.(iv) 4th course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm)

Quantity83.06

Rate-

Amount -

a. Light point Short

Quantity10

Rate-

Amount -

Masonry work (first sort), in Cement mortar 1:6 (1 cement: 6 coarse sand)

Quantity180.9

Rate-

Amount -

Granite stone of any colour and shade

Quantity6.81

Rate-

Amount -

Armed cable for Main 4 core X 4 Sqmm for Building

Quantity15

Rate-

Amount -

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Quantity877.99

Rate-

Amount -

New work ( Two or more coats) over and including priming coat with water thinnable cement primer

Quantity479.38

Rate-

Amount -

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level

Quantity-

Rate-

Amount -

Armed cable for Main 4 core X 4 Sqmm for Building

Quantity15

Rate-

Amount -

Marble stone flooring with 18mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with:

Quantity-

Rate-

Amount -

With F. P. S. (non-modular) bricks

Quantity6.96

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form work for:

Quantity-

Rate-

Amount -

Of area 3 sq. metres and below

Quantity54

Rate-

Amount -

a. With 1.5 mm2 copper cable s/core

Quantity1230

Rate-

Amount -

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand):

Quantity-

Rate-

Amount -

b. Long point

Quantity6

Rate-

Amount -

e. Fan point medium

Quantity6

Rate-

Amount -

Foundations, footings, bases of Columns

Quantity839.64

Rate-

Amount -

1:6 (1 cement :6 Coarse sand)

Quantity466.33

Rate-

Amount -

All kind of Soil

Quantity12.38

Rate-

Amount -

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller in stages to proper grade and camber, applying and brooming requisite type of screening/binding materials to fill up the interstices of coarse aggregate, watering and compacting to required density

Quantity-

Rate-

Amount -

Supply and Installation CO2 EXTINGUISHER

Quantity3

Rate-

Amount -

Wiring with 1.5 mm2 single core copper cable in surface casing capping i.e providing and fixing anchor made 5A flush type switches and all other accessories

Quantity-

Rate-

Amount -

Grading II

Quantity-

Rate-

Amount -

50 mm nominal outer dia Pipes

Quantity6.3

Rate-

Amount -

Wiring with 3 pin 5A plug with single core copper cable 2.5 mm2 in surface casing capping i.e. providing and fixing anchor made 3 pin 5A socket outlet and 5aA flush type switches and earthing the third pin etc.

Quantity-

Rate-

Amount -

a. MCB 10A

Quantity6

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic excavator/Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge

Quantity-

Rate-

Amount -

k. Change over Switch 100A

Quantity2

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form for

Quantity-

Rate-

Amount -

Second class teak wood

Quantity0.21

Rate-

Amount -

Applying priming coat with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.

Quantity-

Rate-

Amount -

a. MCB 20A

Quantity28

Rate-

Amount -

Providing and fixing ISI marked flush door shutters conforming to S: 2202 (part 1) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.

Quantity-

Rate-

Amount -

Applying priming coat with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.

Quantity-

Rate-

Amount -

Foundations, footings, bases of Columns

Quantity228.43

Rate-

Amount -

Earth work in excavation by mechanical means (Hydraulic excavator/Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge

Quantity-

Rate-

Amount -

a. With 1.5 mm2 copper cable s/core

Quantity1370

Rate-

Amount -

Providing and fixing white vitreous China pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:

Quantity-

Rate-

Amount -

Size of Tile 600x600 mm

Quantity15.84

Rate-

Amount -

15 mm nominal bore

Quantity12

Rate-

Amount -

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the direction of Engineer-in-Charge. (Cost of aluminium snap beading shall be paid in basic item)

Quantity-

Rate-

Amount -

13 mm nominal chipping size

Quantity1662

Rate-

Amount -

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 Cement 2 coarse sand 4 graded stone aggregate 12.5mm nominal size).

Quantity77.97

Rate-

Amount -

All kind of Soil

Quantity1115.99

Rate-

Amount -

b. Isolator 63 Amp 2 pole

Quantity2

Rate-

Amount -

For shutters of doors, windows, ventilators including providing and fixing hinges/pivots and making provision for fixing of fitting wherever required including the cost of EPDM rubber/ neoprene gasket required (Fitting shall be paid for seperately)

Quantity-

Rate-

Amount -

Two Coats

Quantity257.47

Rate-

Amount -

1:6 (1 cement :6 Coarse sand)

Quantity259.81

Rate-

Amount -

With F. P. S. (non-modular) bricks

Quantity6.02

Rate-

Amount -

i. Bus-Bar 100A 4 strips

Quantity1

Rate-

Amount -

Providing and fixing P.V.C. Rain water pipes of 160 mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, including fixing the pipe on wall using approved wooden cleats projecting 25 mm to 40 mm from face of wall a fixing with clips of approved quality and One Number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C.fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete.

Quantity337

Rate-

Amount -

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand):

Quantity-

Rate-

Amount -

Grading III

Quantity-

Rate-

Amount -

With F. P. S. (non-modular) bricks

Quantity6.02

Rate-

Amount -

With F. P. S. (non-modular) bricks

Quantity6.96

Rate-

Amount -

m. Bracket holder

Quantity6

Rate-

Amount -

d. With 6mm2 copper cable s/core

Quantity1200

Rate-

Amount -

Prime Coat

Quantity-

Rate-

Amount -

Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:

Quantity-

Rate-

Amount -

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.

Quantity42.81

Rate-

Amount -

With 20 mm diameter round bar

Quantity10

Rate-

Amount -

New work ( Two or more coats) over and including priming coat with water thinnable cement primer

Quantity942.15

Rate-

Amount -

PLUMBING FIRST FLOOR

Quantity-

Rate-

Amount -

Wiring with 3 pin 15A plug with single core copper cable 4mm2 in surface casing capping i.e. providing and fixing anchor made 3 pin 15A socket outlet and 15A flush type switches and earthing the third pin etc.

Quantity-

Rate-

Amount -

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Quantity-

Rate-

Amount -

All kind of Soil

Quantity31.16

Rate-

Amount -

c. with 4 mm2 copper cable s/core

Quantity920

Rate-

Amount -

Wiring with 1.5 mm2 single core copper cable in surface casing capping i.e. providing and fixing anchor made 5A flush type switches and all other accessories

Quantity-

Rate-

Amount -

BOYS HOSTEL SEPTIC TANK

Quantity-

Rate-

Amount -

Hot Rolled deformed bars

Quantity5374.38

Rate-

Amount -

Second class teak wood

Quantity0.21

Rate-

Amount -

With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Quantity3557.16

Rate-

Amount -

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately)

Quantity-

Rate-

Amount -

Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

Quantity-

Rate-

Amount -

Marble stone flooring with 18mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with:

Quantity-

Rate-

Amount -

20 mm nominal outer dia Pipes

Quantity20.88

Rate-

Amount -

All kind of Soil

Quantity15.18

Rate-

Amount -

Wiring with 3 pin 5A plug with single core copper cable 2.5 mm2 in surface casing capping i.e. providing and fixing anchor made 3 pin 5A socket outlet and 5aA flush type switches and earthing the third pin etc.

Quantity-

Rate-

Amount -

Providing and fixing white vitreous China pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked black solid plastic seat and lid

Quantity-

Rate-

Amount -

600mm dia R.C.C. Pipe

Quantity10

Rate-

Amount -

a. Light point Short

Quantity10

Rate-

Amount -

1:6 (1 cement :6 Coarse sand)

Quantity1192.64

Rate-

Amount -

Concealed work, including cutting chases and making good the walls etc.

Quantity-

Rate-

Amount -

20 mm cement plaster of mix:

Quantity-

Rate-

Amount -

Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS: 14616 and TADS 15:2001 (Part 8) fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer-incharge and panelling with panels of: (Note: screws shall be paid seperately) Butt hinges and necessary

Quantity-

Rate-

Amount -

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand):

Quantity-

Rate-

Amount -

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sum on the prepared bituminous surface cleaned with mechanical broom.

Quantity1662

Rate-

Amount -

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 Cement: 3 Coarse sand), jointing with Grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc., complete

Quantity-

Rate-

Amount -

With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm)

Quantity15.4

Rate-

Amount -

Centering and shuttering including strutting, propping etc. and removal of form work for:

Quantity-

Rate-

Amount -

l. Angle holder

Quantity6

Rate-

Amount -

m. Bracket holder

Quantity6

Rate-

Amount -

Hot finished welded type tubes

Quantity2034.7

Rate-

Amount -

40 mm nominal outer dia Pipes

Quantity29.47

Rate-

Amount -

External work

Quantity-

Rate-

Amount -

e. Isolator 63 Amp 2 pole

Quantity8

Rate-

Amount -

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 Cement 2 coarse sand 4 graded stone aggregate 12.5mm nominal size).

Quantity21.16

Rate-

Amount -

1:4 (1 cement: 4 coarse sand)

Quantity88.86

Rate-

Amount -

Udaipur green marble

Quantity43.2

Rate-

Amount -

Providing and laying in position ready mixed M25 grade concrete for RCC work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixture, manufactured as per Mix Design of specified Grade for RCC work, including pumping of RMC from transit mixer to site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including cost of admixtures in recommended proportions as per 15-9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in charge. (NOTE: Cement content considered in this item is @ 330 kg/cum. Excess or less cement used as per design mix is payable or recoverable separately)

Quantity-

Rate-

Amount -

c. with 4 mm2 copper cable s/core

Quantity2120

Rate-

Amount -

All kind of Soil

Quantity12.38

Rate-

Amount -

Evaluation Notes How It Works ?

Partners

Payment Type

Bank Certification Amount

Bank Guarantee Amount

Additional Info 1

Additional Info 2

Additional Info 3

Additional Info 4

Remarks

Potential Partner

Select Your Requirements

Help me get relevant partners for joint bidding

Help me get relevant material suppliers

Help me get project financing

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.