Border Security Force Tender

... More
The BSF has issued a formal invitation for competitive bids for the Border Security Force project, for Repair Of Damaged Indo Bangladesh Border Fence In Aor Of Bop Adharghat And Bop Omkhawa Of 2 Bn Bsf Under Shq Bsf Jowai Meghalaya Ftr in East Khasi Hills, Meghalaya, with an estimated contract value of Rs. 38,58,535. The bid opening date for this tender is 30-10-2026 and the last date for bid submission is 25-11-2026. Interested bidders for Border Security Force tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Border Security Force - BSF Tender - Meghalaya Tender

Opening Date30 Oct 2026
Closing Date25 Nov 2026
Tender Amount₹ 38,58,535 
Notes
Download

Costs

Description

Repair Of Damaged Indo Bangladesh Border Fence In Aor Of Bop Adharghat And Bop Omkhawa Of 2 Bn Bsf Under Shq Bsf Jowai Meghalaya Ftr

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete

297.02

736

218726

... More
Add Modified Estimated Cost after using correction factor on DSR 2023 on account of GST @ 0.973 on Total (i.e SL No. 01 to 04) Rs. 9,66,429/-

1

26094

-26094

... More
Add cost Index @34.58% on Rs. 940335.00

1

940335

325168

... More
Providing and Fixing Circular Hollow Section (CHS) post having external dia of 76.10 mm (±1%), thickness 3.60 mm (±10%) medium grade and having weight 6.42 kg / metre (±8%) with Hot dipped galvanised zinc (Zn) coating of minimum 360 GSM (inside plus outside) as per IS 2629/ASTM A123 / IS 4736 and thermoplast coating of minimum 400 microns (DFT) of specified colour (RAL 6005), total length of post 3.40 mtr provided at 2.50 mtr center to center, yard handling & stacking, hoisting and transportation of CHS post from factory to working site, embedding of the same upto 700 mm in cement concrete block of required size with M-60 grade cementious grout (non-shrink) in line, level & alignment as per drawing and as directed by Engineer-in-Charge.

104

4485

466440

... More
Providing and Fixing Straining Y-arms, for supporting concertina coil and for straining Razor wire by providing & employing six nos. SS -316 Eye bolts (M 8 x 100) with breakable head safety nuts & rod as shown in drawing , having weight 4.00 kg (±8%) each as per specified drawing , made up of MS angle 50 x 50 x 5 mm, one arm length 510 mm, welding as mention in drawing with 120 degree of angle of Y, with Hot dipped galvanised zinc (Zn) coating of minimum 360 GSM as per IS 2629/IS 4759/ASTM A123 and thermoplast coating of minimum 400 microns (DFT) of specified colour (RAL 6005) fitted to CHS posts with proper sleeve caps (cap of 63.0 mm outer dia for straining Y arms being provided at every 30 metre C/C or as per site requirement as decided by Engineer-in-Charge and fixing arrangement of caps with two numbers SS-316 mushroom head bolts with breakable head safety nuts (M 8 x 120) to be provided as per attached drawings) made of 3.0 mm thick 63.0 mm OD 100 mm long MS tube welded to 90 mm dia 4 mm thick circular plate and with Hot dipped galvanised zinc (Zn) coating of minimum 360 GSM as per IS 2629/IS 4759/IS4736/ASTM A123 and thermoplast coating of minimum 400 microns (DFT) of specified colour, yard handling & stacking, hoisting and transportation of Straining Y-arms from factory to working site etc. all complete as shown in drawing and as per direction of Engineer-in-Charge.

9

2195

19755

... More
Providing and Fixing intermediate Y-arms for supporting concertina coil as specified in drawing , made up of MS angle 50x50x5 mm as per IS 1852 one arm length 510 mm, welded as mention in drawing with 120 degreee of angle of Y, with a support MS strip of 25mm x 5 mm (galvanised as per IS 4759), with Hot dipped galvanised zinc (Zn) coating of minimum 360 GSM as per IS 2629/IS 4759/ASTM A123 and thermoplast coating of minimum 400 microns (DFT) of specified colour (RAL 6005) fitted to CHS posts with proper sleeve caps {cap of 90 mm outer dia, 85 mm inner dia & 45 mm long. Intermediate Y arms will be provided at every post except the posts with straining Y-arm and fixing arrangement of caps with two numbers SS-316 mushroom head bolts with breakable head safty nuts (M 8X120 ) to be provided as per attached drawings} made of 4.00 mm thick MS strip and with Hot dipped galvanised zinc (Zn) coating of minimum 360 GSM as per IS 2629/IS 4759/ASTM A123 and thermoplast coating of minimum 400 microns (DFT) of specified colour. Weight of Y arm shall be 4.00 Kg (±8%) each, yard handling & stacking, hoisting and transportation of Straining Y-arms from factory to working site etc. all complete as per mention in drawing and as per direction of Engineer-in-Charge.

95

1337

127015

... More
Providing and Fixing High security weld mesh panel, wire mesh panel size 2667x955mm , weight 24.3 kg (±5%) of each panel having Mesh wire diameter 4.00 mm (± 0.05 mm), Mesh size 76.2mm (± 3.0 mm) x 12.7 mm (± 2.0 mm) (W x H) (tolerance of ±2 mm) with Hot dipped galvanised zinc (Zn) coating of minimum 100 GSM as per IS 2629/ASTM A123/IS 4826/EN 10244-2 & minimum 300 microns (DFT) of thermoplast coating of specified colour, reinforced by means of 2 nos. V - shapes bend in horizontal direction of the each panel of size as shown in the drawing, including overlapping of panel (75 mm over lap in horizontal direction and 167 mm overlap in vertical directions) including fixing with 7 nos. OMEGA clamps of size 178 mm x 35 mm x 3 mm and profile plates of size of 178 mm x 50.20 mm x 3.0 mm using two numbers SS-316 mushroom head bolts (M 8x35/50) with breakable head safty nuts and washers for fixing the mesh to the CHS post and fixing of mesh panels with each other at overlap location with IP Binder of size 160 mm x 25 mm x 3.00 mm with two slots with Hot dipped galvanised zinc (Zn) coating of minimum 360 GSM as per IS 2629/ASTM A123/IS 4759 and minimum 400 microns (DFT) of thermoplast coating including yard handling & stacking, hoisting and transportation of the same from factory to working site etc. all complete as per mention in drawing, as per manufacturer's specifications and as per direction of Engineer-in-Charge. (Cost of providing and fixing of OMEGA clamp with profile plates and its nut / bolts / washer etc. shall be paid seperatly & measurement shall be done for finished item of work).

702

2035

1428570

... More
Providing and Fixing OMEGA clamp of size 178 mm x 35 mm x 3 mm and profile plate of size of 178 mm x 50.20 mm x 3 mm of shapes as per manufacturer's specifications and attached drawings made with M.S. sheet/plate/flat and Hot dipped galvanised zinc (Zn) coating of minimum 360 GSM as per IS 2629/IS 4759/ASTM A123 and thermoplast coating of minimum 400 microns (DFT) of specified colour (RAL 6005) using two numbers SS-316 mushroom head bolts with breakable head safty nuts (M 8X60/80 mm ) as per IS 8535-1987 and washers for fixing the mesh to the CHS post including yard handling & stacking, hoisting and transportation of the same from factory to working site etc. all complete as per mention in drawing, as per manufacturer's specifications and as per direction of Engineer-in-Charge.

728

329

239512

... More
Providing and Fixing 6 nos Razor wire of SS-316 Tear Blade profile (3 nos fixed to each arm of Straining & intermediate Y-arms using accessories as per manufacturer's specifications) having SS Tear (TBBT) blade(SS 316) of length of 30 mm, thickness 0.45 mm (±0.02 mm) width 16 mm (±0.05 mm), C/ C distance of blades as 50 mm & core wire diameter 3.50 mm (±0.05 mm) having tensile strength of 1400-1500 N per Sq.mm. (length of each wire will be measured for payment)

260

68

17680

... More
Providing and Fixing punched type Razor wire coil of dia 850 mm (± 50 mm) and dia of wire not less than 3.50 mm (± 0.05 mm) of SS-316 comfirming to IS-6911/1992 having 56 loops of coil when not stretched with SS Tear (TBBT) blade(SS 316) of length of 30 mm, thickness 0.45 mm (±0.02 mm) width 16 mm (±0.05 mm), C/ C distance of blades as 50 mm . The weight of razor wire coil should not be less than 20.01 kg (± 5 %) per coil. The razor wire coil to be fixed with hog ring of SS-316 dia 3 mm using minimum (8000 nos. per Km.) (weight of Hog Ring shall be 0.005 Kg (±8%) each).tied to angle iron, all complete as per direction of Engineer-in-charge. Stretchable length of coil is 10 mtr and tensile strength of wire varies from 1400-1500 N/Sqmm.

260

1131

294060



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.