Indian Army Tender
... More
The OSCC has issued a formal invitation for competitive bids for the Indian Army project, for Construction Of Orphange Home At Sorde Village, Kamjong Dist, Manipur in Kamjong, Manipur, with an estimated contract value of Rs. 25,00,000. The bid opening date for this tender is 03-11-2026 and the last date for bid submission is 25-11-2026. Interested bidders for Indian Army tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Indian Army - OSCC Tender - Manipur Tender
Opening Date3 Nov 2026
Closing Date25 Nov 2026
Tender Amount₹ 25,00,000 This is an estimated amount, exact amount may vary.
Costs
EMD
₹ 50,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Construction Of Orphange Home At Sorde Village, Kamjong Dist, Manipur
Contact
Tender Id
2026_ARMY_796906_1Tender No
A/SAD/IGAR(S)/10SECT/16/26-27Tender Authority
Indian Army ViewPurchaser Address
-Website
https://www.indianarmy.nic.in/home
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo Mechanically Treated bars
517.27
1
-
... More
Providing and laying 75mm thick compacted bed of dry stone aggregate of 40mm thick nominal size incl spreading, well ramming, consolidating and grouting with jamuna sand, incl finishing smooth etc complete as per direction of engr -in-charge
94.5
1
-
... More
Cement concrete pavement with 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), including finishing complete.
9.45
1
-
... More
Neat cement punning at cement concrete floor as per direction of Engg-in -charge
94.5
1
-
... More
15mm cement plaster finished with a floating coat of neat cement of mix (1:4 (1cement : 4 fine sand) on external wall
107.31
1
-
... More
12mm cement plaster of mix 1:4 (1 cement : 4 fine sand)
186.36
1
-
... More
Finishing wall with water proofing cement paint of required shade : New work (Two or more coat applied @ 3.84 Kg/10 Sqm)
107.31
1
-
... More
Distempering with oil bound washable distemper of approved brand and manufractures give an even shade New work (one or more coats) over and including water thinnable priming coat with cement primer
186.36
1
-
... More
Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete
186.36
1
-
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrougth framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lungs or dash fastener shall be paid for separately) 2nd class H/wood
0.52
1
-
... More
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately all complete as per direction of Engineer-in-charge. Kiln seasoned selected planks of sheesham wood 30mm thick shutters sqm
10.66
1
-
... More
Providing & fixing glass panes with putty and glazing clips in steel doors windows, clerestory windows all complete with : 4.0 mm thick glass panes
3.78
1
-
... More
Providing and fixing ISI marked oxidised M.S sliding door bolts of size 250 x 16mm with nuts and screws etc complete.
3
1
-
... More
Providing and fixing ISI marked oxidised M.S tower bolt of size 200 x 10mm black finish, Barrel type) with necessary screws etc. complete
8
1
-
... More
Providing and fixing factory made PVC door frame of size 50x47mm with a wall thickness of 5mm made out of extruded 5mm rigid PVC form sheet mitered at corners and joint with two Nos 150mm long brackets of 15x 15 mm MS square tube, the vertical door frame profiles to be reinforced with 19 x 19 mm MS square tube of 19 gauge, EPDM rubber gasket weather seal to be providing throughout the frame. the door frame to be fixed to th throughout the frame. the foor frame to be fixed to the wall using MS screw 65/100mm size complete as per manufacture specification and direction of Engr-in-charge
20
1
-
... More
Providing and fixing factory made panel PVC door shutter consiting of frame made out of MS tubes of 19 gauge thickness and size of 19x 19mm for styles and 15x 15mm for top and bottom rails. MS frame shall have a coat of steel primers of approved make and manufacture. MS frame covered with 5mm thick heat moulded PVC "C" channel of size 30mm thickness, 70 mm width out of which 50mm shall be flat and 20mm shall be tapered in 45 degree angle on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10mm (5mm x 2) thick, 20mm vide cross PVC sheet be provided as gap insert for top rails & bottom rail, panelling of 5mm thick both side PVC sheet beading on inner side and joined together with solvent cement using PVC solvent adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing 30mm thick pre laminated PVC door shutters
5.6
1
-
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete
1354.15
1
-
... More
Providing and fixing precoatede galvanised iron profile sheets (Size, shape and pitch of corrugation as approved by Engg-in-charge) 0.50mm (+0.05%) total coated thickness with zinc coating 120 gm/Sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyster top coat 15-18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 mtr or as desired by Engg-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) which with EPDM seal, complete upto any pitch in horizental/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
122.96
1
-
... More
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges Plain (500-600mm)
14.5
1
-
... More
Providing 10mm thick plaster of paries (gypsun anhydrous) celling upto a height of 5m above floor level, over first class kail wood strips 25x6 mm with 10mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be paid separately); Flat surface.
89.84
1
-
... More
Providing and fixing 12mm thick flat pressed 3 layer medium density particle board or graded particle board IS: 3087 marked, in celling with necessary nails etc. complete.
14.19
1
-
... More
Providing and wash basin with CI brackets, 15mm CP brass piller taps, 32 mm CP brass waste of standard pattern, including painting of brackets, cutting and making good the wall wherever required white vitreous china wash basin size 630x450mm with a pair of 15mm CP brass pillar taps.
2
1
-
... More
Polyethylene water storage tank with cover and suitable locking arrangment
1000
1
-
... More
Providing and fixing white vitreous china pedestal type water closer (European type W.C pan) with seat and lid 10 litre low level white P.V.C flushing cistern, including flush pipe, with manually controlled device (Handle lever), conforming to IS : 7231, with all fitting and fixtures complete, including cutting and making good the walls and floors wherener required : W.C pan with ISI marked white solid plastic seat and lid
2
1
-
... More
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing Rectangular shape 453x357mm
2
1
-
... More
Providing and fixing on wall face unplasticised - pvc rain water pipes confirming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, single socket pipes 110 mm diameter
20
1
-
... More
Providing and fixing G.I pipes complete with G.I fittings and clamps, i/c cutting and making good the wall etc 15mm dia nominal bore
40
1
-
... More
Providing and fixing G.I pipes complete with G.I fittings and clamps, i/c cutting and making good the wall etc 20mm dia nominal bore
20
1
-
... More
Providing and fixing C.P brass bib cock of approved quality confirming to IS : 8931:15mm nominal bore
5
1
-
... More
Providing and fixing C.P brass stop cock of standared design and of approved quality confirming to IS : 8931:15mm nominal bore
4
1
-
... More
Providing and fixing C.P brass angle value for basin mixer and geyser points of approved quality confirming to IS : 8931:15mm nominal bore
2
1
-
... More
Stainless steel kitches sink - with drain board 510x1040 mm bowl depth 250mm
1
1
-
... More
PTMT-waste coupling 38/40 mm with flexible (Coil shaped) PVC waste pipe for sink and wash basin 32mm dia with length not less than 700mm i/c PVC waste fitting etc.
1
1
-
... More
Wiring for light point/ fan point/ call bell point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with piano type switch phenolic laminated sheet, suitable size of MS box and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable etc
20
1
-
... More
Supply and fixing piano type switch 5 amps including connection etc
20
1
-
... More
Supply and fixing 3 pin 5/6 Amps socket outlet including connection etc.
8
1
-
... More
Supply and fixing 8 way SPN DB Single pole and neutral steel sheet enclosure double door 240 volts, prewired connected
1
1
-
... More
Supply and fixing MCB DP double pole 240V, 40 amps complete with connection "B" curve
1
1
-
... More
Supply and fixing MCB SP 5 to 32 Amps 240V complete with connection "B" curve
6
1
-
... More
Supplying and fixing two module stepped type electronic fan regulator including connections but excluding modular plate etc. as required
4
1
-
... More
Supplying and fixing 3 pin, 5A ceiling rose including connections etc. as required
18
1
-
... More
Supply and fixing LED tube light batten 1 x 20 watt including bipin holder, LED driver complete with PVC 3 core copper conductors connection etc.
10
100
-
... More
Supply and fixing Ceiling fan 1200mm sweep including down rod, connection wire as per required incl connection complete
8
53
-
... More
Supply and fixing exhaust fan 300mm sweep including connecting wires as per required incl connection compelet
3
10
-
... More
Staging for water storage tank of size 1.50m x 1.50m x 2.00 m height, shall be made of MS SI 55x55x5mm vertical posts (04 Nos), 40x40x5mm diagonal members and 55x55x5mm horizontal memebers. MS chequered top plate made of 4.00 mm thick, surrounding & Diagonally supported from bottom with MS AI 55x55x5mm thick. MS flat Iron 40x5mm thick will be provided at the center joint of the MS Plate. At the bottom of each vertical post 100mm x 100mm x 6mm thick MS Plate shall be provided for stable of the staging complete as per drawing.
1
11
-

