Yashwantrao Chavan Academy Of Development Administration Tender
Search from over 12139+ business opportunities that have been announced from the biggest Mahatenders, e tender Maharashtra, Maharashtra government tenders, and the Online Tender Notices posted on Maharashtra e tenders till date. Find opportunities that have come in from the multiple corporations, Maharashtra government departments, State PSUs, and Private companies from the state.
Yashwantrao Chavan Academy Of Development Administration - YASHADA Tender
Civil And Construction
Building Construction
Eprocure
Opening Date5 Feb 2024
Closing Date5 Mar 2024
Tender Amount₹ 48,80,12,214
Costs
EMD
₹ 24,40,061Document Cost
₹ 3,540Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_DGY_996949_1Bid Award Id
ViewTender No
Construction of CGG Residential and Academic BuildTender Authority
Yashwantrao Chavan Academy Of Development Administration ViewPurchaser Address
-Website
http://mahatenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Tender Document of Construction of CGG Residential and Academic Building at YASHADA
BOQ Items
... More
Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/murum watering, ramming etc. complete.(Lift upto 1.5 m). By Mechanical Means (Item No. 21.20)
794.5
-
-
... More
Providing preconstructional antitermite treatment as per I.S. 6313(Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper. (Item No. 21.22)
2558
-
-
... More
Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/granite/quartzite/gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 24.01)
300.1
-
-
... More
Providing and laying Cast in situ/Exposed form finish Ready Mix cement concrete M-30 of trap/granite/quartzite/gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including Steel centering formwork, cover blocks laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 25.15)
257.1
-
-
... More
Providing and laying Cast in situ/Exposed form finish Ready Mix cement concrete M-30 of trap/granite/quartzite/gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 25.35)
17.3
-
-
... More
Providing and laying Cast in situ/Exposed form finish Ready Mix cement concrete M-30 of trap/granite/quartzite/gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) ... (Item No. 25.35)
90.2
-
-
... More
Providing and laying Cast in situ/Exposed form finish Ready Mix cement concrete M-30 of trap/granite/quartzite/gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) ... (Item No. 25.35, First Floor)
24.8
-
-
... More
Providing and laying Cast in situ/ Exposed form finish Ready Mix cement concrete M-30 of trap/granite/quartzite/gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 25.35, Second Floor)
24.8
-
-
... More
Providing and laying Cast in situ/Exposed form finish Ready Mix cement concrete M-30 of trap/granite/quartzite/gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 25.35, Third Floor)
24.8
-
-
... More
Providing and laying Cast in situ/Exposed form finish Ready Mix cement concrete M-30 of trap/granite/quartzite/gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 25.35, Fourth Floor)
24.8
-
-
... More
Providing and laying Cast in situ/Exposed form finish Ready Mix cement concrete M-30 of trap/granite/quartzite/gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade)(Item No. 25.35, Fifth Floor)
24.8
-
-
... More
Providing and laying Cast in situ/Exposed form finish Ready Mix cement concrete M-30 of trap/granite/quartzite/gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 25.35, Sixth Floor)
24.8
-
-
... More
Providing and laying Cast in situ/Exposed form finish Ready Mix cement concrete M-30 of trap/granite/quartzite/gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 25.35, Seventh Floor)
8.3
-
-
... More
FORM FINISHED FORMWORK: Providing, fabricating and erecting form work (centering and shuttering) at all levels and places wherever needed/specified as per drawing including striking with 12mm Plastic coated, marine resistant waterproof ply/Smooth finished MS plates with adjustable steel props of acceptable Staging system and with sufficient bracing as approved by consultant, design as per IS 14687 or latest, at any level including using shuttering oil as per structural consultants specifications, strutting, propping, removing the shuttering after stipulated period and re-propping. Cost to include designing of proper form work and staging system to suit the requirements,Submission of design calculations and shop drawings for approval,sealing the joints with heavy duty brown self adhesive tape, aligning to line and levels including M.S. Ties, PVC Spacer, Providing openings/ cutouts/ pockets, applying deshuttering chemical, Deshuttering as approved by the consultant etc., complete at all levels, double/tripple heights and profiles.[Measurement will be paid for the area of shuttering coming in contact with concrete only] Foundations / Raft
155.6
-
-
... More
FORM FINISHED FORMWORK: Providing, fabricating and erecting form work (centering and shuttering) at all levels and places wherever needed/specified as per drawing including striking with 12mm Plastic coated, marine resistant waterproof ply/Smooth finished MS plates with adjustable steel props of acceptable Staging system and with sufficient bracing as approved by consultant, design as per IS 14687 or latest, at any level including using shuttering oil as per structural consultants specifications, strutting, propping, removing the shuttering after stipulated period and re-propping. Cost to include designing of proper form work and staging system to suit the requirements,Submission of design calculations and shop drawings for approval,sealing the joints with heavy duty brown self adhesive tape, aligning to line and levels including M.S. Ties, PVC Spacer, Providing openings/ cutouts/ pockets, applying deshuttering chemical, Deshuttering as approved by the consultant etc., complete at all levels, double/tripple heights and profiles.[Measurement will be paid for the area of shuttering coming in contact with concrete only] Beams: Strainght / Curved / Segmental
167.8
-
-
... More
FORM FINISHED FORMWORK: Providing, fabricating and erecting form work (centering and shuttering) at all levels and places wherever needed/specified as per drawing including striking with 12mm Plastic coated, marine resistant waterproof ply/Smooth finished MS plates with adjustable steel props of acceptable Staging system and with sufficient bracing as approved by consultant, design as per IS 14687 or latest, at any level including using shuttering oil as per structural consultants specifications, strutting, propping, removing the shuttering after stipulated period and re-propping. Cost to include designing of proper form work and staging system to suit the requirements,Submission of design calculations and shop drawings for approval,sealing the joints with heavy duty brown self adhesive tape, aligning to line and levels including M.S. Ties, PVC Spacer, Providing openings/ cutouts/ pockets, applying deshuttering chemical, Deshuttering as approved by the consultant etc., complete at all levels, double/tripple heights and profiles.[Measurement will be paid for the area of shuttering coming in contact with concrete only] Coffer Beams: Strainght / Curved / Segmental(Rate only)
198.8
-
-
... More
FORM FINISHED FORMWORK: Providing, fabricating and erecting form work (centering and shuttering) at all levels and places wherever needed/specified as per drawing including striking with 12mm Plastic coated, marine resistant waterproof ply/Smooth finished MS plates with adjustable steel props of acceptable Staging system and with sufficient bracing as approved by consultant, design as per IS 14687 or latest, at any level including using shuttering oil as per structural consultants specifications, strutting, propping, removing the shuttering after stipulated period and re-propping. Cost to include designing of proper form work and staging system to suit the requirements,Submission of design calculations and shop drawings for approval,sealing the joints with heavy duty brown self adhesive tape, aligning to line and levels including M.S. Ties, PVC Spacer, Providing openings/ cutouts/ pockets, applying deshuttering chemical, Deshuttering as approved by the consultant etc., complete at all levels, double/tripple heights and profiles.[Measurement will be paid for the area of shuttering coming in contact with concrete only] Slabs: (flat, sloping, cantilevered or any other position) and Staircases
210.6
-
-
... More
FORM FINISHED FORMWORK: Providing, fabricating and erecting form work (centering and shuttering) at all levels and places wherever needed/specified as per drawing including striking with 12mm Plastic coated, marine resistant waterproof ply/Smooth finished MS plates with adjustable steel props of acceptable Staging system and with sufficient bracing as approved by consultant, design as per IS 14687 or latest, at any level including using shuttering oil as per structural consultants specifications, strutting, propping, removing the shuttering after stipulated period and re-propping. Cost to include designing of proper form work and staging system to suit the requirements,Submission of design calculations and shop drawings for approval,sealing the joints with heavy duty brown self adhesive tape, aligning to line and levels including M.S. Ties, PVC Spacer, Providing openings/ cutouts/ pockets, applying deshuttering chemical, Deshuttering as approved by the consultant etc., complete at all levels, double/tripple heights and profiles.[Measurement will be paid for the area of shuttering coming in contact with concrete only] Coffer Slab: (flat, sloping, cantilevered or any other position) and Staircases) (Rate only)
240.5
-
-
... More
FORM FINISHED FORMWORK: Providing, fabricating and erecting form work (centering and shuttering) at all levels and places wherever needed/specified as per drawing including striking with 12mm Plastic coated, marine resistant waterproof ply/Smooth finished MS plates with adjustable steel props of acceptable Staging system and with sufficient bracing as approved by consultant, design as per IS 14687 or latest, at any level including using shuttering oil as per structural consultants specifications, strutting, propping, removing the shuttering after stipulated period and re-propping. Cost to include designing of proper form work and staging system to suit the requirements,Submission of design calculations and shop drawings for approval,sealing the joints with heavy duty brown self adhesive tape, aligning to line and levels including M.S. Ties, PVC Spacer, Providing openings/ cutouts/ pockets, applying deshuttering chemical, Deshuttering as approved by the consultant etc., complete at all levels, double/tripple heights and profiles.[Measurement will be paid for the area of shuttering coming in contact with concrete only] RCC Pardi and Shear Walls: Strainght / Curved / Segmental
260.7
-
-
... More
FORM FINISHED FORMWORK: Providing, fabricating and erecting form work (centering and shuttering) at all levels and places wherever needed/specified as per drawing including striking with 12mm Plastic coated, marine resistant waterproof ply/Smooth finished MS plates with adjustable steel props of acceptable Staging system and with sufficient bracing as approved by consultant, design as per IS 14687 or latest, at any level including using shuttering oil as per structural consultants specifications, strutting, propping, removing the shuttering after stipulated period and re-propping. Cost to include designing of proper form work and staging system to suit the requirements,Submission of design calculations and shop drawings for approval,sealing the joints with heavy duty brown self adhesive tape, aligning to line and levels including M.S. Ties, PVC Spacer, Providing openings/ cutouts/ pockets, applying deshuttering chemical, Deshuttering as approved by the consultant etc., complete at all levels, double/tripple heights and profiles.[Measurement will be paid for the area of shuttering coming in contact with concrete only] RELIEF FORMWORK (Rate only)
265.5
-
-
... More
FORM FINISHED FORMWORK: Providing, fabricating and erecting form work (centering and shuttering) at all levels and places wherever needed/specified as per drawing including striking with 12mm Plastic coated, marine resistant waterproof ply/Smooth finished MS plates with adjustable steel props of acceptable Staging system and with sufficient bracing as approved by consultant, design as per IS 14687 or latest, at any level including using shuttering oil as per structural consultants specifications, strutting, propping, removing the shuttering after stipulated period and re-propping. Cost to include designing of proper form work and staging system to suit the requirements,Submission of design calculations and shop drawings for approval,sealing the joints with heavy duty brown self adhesive tape, aligning to line and levels including M.S. Ties, PVC Spacer, Providing openings/ cutouts/ pockets, applying deshuttering chemical, Deshuttering as approved by the consultant etc., complete at all levels, double/tripple heights and profiles.[Measurement will be paid for the area of shuttering coming in contact with concrete only] GROOVES IN CONCRETE SURFACES (as per pattern) (trapizoidal section) (using teakwood patti) 25 mm wide. (Rate only)
278.8
-
-
... More
FORM FINISHED FORMWORK: Providing, fabricating and erecting form work (centering and shuttering) at all levels and places wherever needed/specified as per drawing including striking with 12mm Plastic coated, marine resistant waterproof ply/Smooth finished MS plates with adjustable steel props of acceptable Staging system and with sufficient bracing as approved by consultant, design as per IS 14687 or latest, at any level including using shuttering oil as per structural consultants specifications, strutting, propping, removing the shuttering after stipulated period and re-propping. Cost to include designing of proper form work and staging system to suit the requirements,Submission of design calculations and shop drawings for approval,sealing the joints with heavy duty brown self adhesive tape, aligning to line and levels including M.S. Ties, PVC Spacer, Providing openings/ cutouts/ pockets, applying deshuttering chemical, Deshuttering as approved by the consultant etc., complete at all levels, double/tripple heights and profiles.[Measurement will be paid for the area of shuttering coming in contact with concrete only] GROOVES IN CONCRETE SURFACES (as per pattern) (trapizoidal section) (using teakwood patti) 20 mm wide. (Rate only)
175.3
-
-
... More
MURALS: Providing, fabricating, erecting and fixing in position shuttering formwork as per pattern and sizing using specializd material (details to be submitted by the contractor while quoting), giving fair finished concrete surfaces, making leak proof joints, using required couplers, tie bolts, M.S. Ties, concrete Spacer, providing openings/ cut-outs/ pockets, etc.; using required deshuttering emulsion which will not stain the concrete, etc. complete at all height, depths, lead & lift and required any height staging and supporting sturdy and braced. Also include removing & dismantling the aforesaid assembly after specified or as approved period from the day of casting of concrete.(Measurement: Surface area around the mural to the nearest square or rectangle or circle) (Proposed Material: Aluminium Cast/ Teak Wood/ MDF/ Fibreglass) Rate to include smooth finish and rendering if required, etc. all complete to the satisfaction of PM. On Wall ( rate only)
10.5
-
-
... More
MURALS: Providing, fabricating, erecting and fixing in position shuttering formwork as per pattern and sizing using specializd material (details to be submitted by the contractor while quoting), giving fair finished concrete surfaces, making leak proof joints, using required couplers, tie bolts, M.S. Ties, concrete Spacer, providing openings/ cut-outs/ pockets, etc.; using required deshuttering emulsion which will not stain the concrete, etc. complete at all height, depths, lead & lift and required any height staging and supporting sturdy and braced. Also include removing & dismantling the aforesaid assembly after specified or as approved period from the day of casting of concrete.(Measurement: Surface area around the mural to the nearest square or rectangle or circle) (Proposed Material: Aluminium Cast/ Teak Wood/ MDF/ Fibreglass) Rate to include smooth finish and rendering if required, etc. all complete to the satisfaction of PM. On Ceiling ( rate only)
10.3
-
-
... More
Providing and laying Cast in situ/Exposed form finish Ready Mix cement concrete in M-30 of trap/granite/quartzite/gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 26.19)
120
-
-
... More
Providing and laying Cast in situ/Exposed form finish Ready Mix cement concrete in M-30 of trap/granite/quartzite/gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade)(Item No. 26.19, First Floor)
75.6
-
-
... More
Providing and laying Cast in situ/Exposed form finish Ready Mix cement concrete in M-30 of trap/granite/quartzite/gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade)(Item No. 26.19, Second Floor)
75.6
-
-
... More
Providing and laying Cast in situ/Exposed form finish Ready Mix cement concrete in M-30 of trap/granite/quartzite/gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade)(Item No. 26.19, Third Floor)
75.6
-
-
... More
Providing and laying Cast in situ/Exposed form finish Ready Mix cement concrete in M-30 of trap/granite/quartzite/gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 26.19, Fourth Floor)
75.6
-
-
... More
Providing and laying Cast in situ/Exposed form finish Ready Mix cement concrete in M-30 of trap/granite/quartzite/gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade)(Item No. 26.19, Fifth Floor)
75.6
-
-
... More
Providing and laying Cast in situ/Exposed form finish Ready Mix cement concrete in M-30 of trap/granite/quartzite/gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade)(Item No. 26.19, Sixth Floor)
103.7
-
-
... More
Providing and laying Cast in situ/Exposed form finish Ready Mix cement concrete M-30 of trap/granite/quartzite/gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 25.54)
214.2
-
-
... More
Providing and laying Cast in situ/Exposed form finish Ready Mix cement concrete M-30 of trap/granite/quartzite/gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade)(Item No. 25.54, First Floor)
226.8
-
-
... More
Providing and laying Cast in situ/Exposed form finish Ready Mix cement concrete M-30 of trap/granite/quartzite/gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade)(Item No. 25.54, Second Floor)
150.7
-
-
... More
Providing and laying Cast in situ/Exposed form finish Ready Mix cement concrete M-30 of trap/granite/quartzite/gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade)(Item No. 25.54, Third Floor)
150.7
-
-
... More
Providing and laying Cast in situ/Exposed form finish Ready Mix cement concrete M-30 of trap/granite/quartzite/gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade)(Item No. 25.54, Fourth Floor)
150.7
-
-
... More
Providing and laying Cast in situ/Exposed form finish Ready Mix cement concrete M-30 of trap/granite/quartzite/gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade)(Item No. 25.54, Fifth Floor)
150.7
-
-
... More
Providing and laying Cast in situ/Exposed form finish Ready Mix cement concrete M-30 of trap/granite/quartzite/gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade)(Item No. 25.54, Sixth Floor)
150.7
-
-
... More
Providing and laying Cast in situ/ Exposed form finish Ready Mix cement concrete M-30 of trap/granite/quartzite/gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 25.54, Seventh Floor)
162
-
-
... More
Labour rate for coursed rubble masonry second sort of trap/granite/quartzite/gneiss stones in cement mortar 1:6 in external walls of plinth including bailing out water manually, striking joints inside and raking out joints from outside and watering etc.complete (Item No. 28.09)
18.5
-
-
... More
Providing second class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. (Item No. 27.01)
12.4
-
-
... More
Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15cm to 20cm including watering and compaction etc. complete. (Item No. 21.37)
52
-
-
... More
Filling in plinth and floors with approved excavated material in 15cm. to 20cm. Layers including watering and compacting etc. complete. (Item No. 21.36)
52
-
-
... More
Providing preconstructional antitermite treatment as per I.S. 6313(Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper. (Item No. 21.22)
1409.4
-
-
... More
Providing dry/trap/granite/quartzite/gneiss rubble stone soling 15cm to 20cm thick including hand packing and compacting etc. complete. (Item No. 21.38)
289.7
-
-
... More
Providing and laying Cast in situ/Exposed form finish Ready Mix cement concrete M-30 of trap/granite/quartzite/gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 25.74)
116.9
-
-
... More
Providing and laying Cast in situ/ Exposed form finish Ready Mix cement concrete M-30 of trap/granite/quartzite/gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (height up to 4.5 m) (Item No. 25.74, First Floor)
114.3
-
-
... More
Providing and laying Cast in situ/Exposed form finish Ready Mix cement concrete M-30 of trap/granite/quartzite/gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 25.74, Second Floor)
114.3
-
-
... More
Providing and laying Cast in situ/Exposed form finish Ready Mix cement concrete M-30 of trap/granite/quartzite/gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade)(Item No. 25.74, Third Floor)
114.3
-
-
... More
Providing and laying Cast in situ/Exposed form finish Ready Mix cement concrete M-30 of trap/granite/quartzite/gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade)(Item No. 25.74, Fourth Floor)
114.3
-
-
... More
Providing and laying Cast in situ/Exposed form finish Ready Mix cement concrete M-30 of trap/granite/quartzite/gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade)(Item No. 25.74, Fifth Floor)
114.3
-
-
... More
Providing and laying Cast in situ/Exposed form finish Ready Mix cement concrete M-30 of trap/granite/quartzite/gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade)(Item No. 25.74, Sixth Floor)
210.6
-
-
... More
Providing and laying Cast in situ/Exposed form finish Ready Mix cement concrete C.C. M-30 of trap metal for RCC rectangular grid beam with slab as per detailed design and drawing or as directed including dewatering if necessary, steel centering, formwork, cover blocks, laying/pumping, compacting, curing, finishing and roughening them to form surface with C.M. 1:3 of sufficient minimum thickness to give smooth and even surface or roughening them if special finish is to be provided and curing complete(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant(pan mixer). With fine aggregate(Crushed sand VSI Grade) (Item No. 26.62)
205.5
-
-
... More
Providing and laying Cast in situ/Exposed form finish Ready Mix cement concrete C.C. M-30 of trap metal for RCC rectangular grid beam with slab as per detailed design and drawing or as directed including dewatering if necessary, steel centering, formwork, cover blocks, laying/pumping, compacting, curing, finishing and roughening them to form surface with C.M. 1:3 of sufficient minimum thickness to give smooth and even surface or roughening them if special finish is to be provided and curing complete(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant(pan mixer). With fine aggregate(Crushed sand VSI Grade)(Item No. 26.62, First Floor)
38.1
-
-
... More
Providing and laying Cast in situ/Exposed form finish Ready Mix cement concrete C.C. M-30 of trap metal for RCC rectangular grid beam with slab as per detailed design and drawing or as directed including dewatering if necessary, steel centering, formwork, cover blocks, laying/pumping, compacting, curing, finishing and roughening them to form surface with C.M. 1:3 of sufficient minimum thickness to give smooth and even surface or roughening them if special finish is to be provided and curing complete(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant(pan mixer). With fine aggregate(Crushed sand VSI Grade)(Item No. 26.62, Second Floor)
38.1
-
-
... More
Providing and laying Cast in situ/Exposed form finish Ready Mix cement concrete Ready Mix C.C. M-30 of trap metal for RCC rectangular grid beam with slab as per detailed design and drawing or as directed including dewatering if necessary, steel centering, formwork, cover blocks, laying/pumping, compacting, curing, finishing and roughening them to form surface with C.M. 1:3 of sufficient minimum thickness to give smooth and even surface or roughening them if special finish is to be provided and curing complete(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant(pan mixer). With fine aggregate(Crushed sand VSI Grade) (Item No. 26.62, Third Floor)
38.1
-
-
... More
Providing and laying Cast in situ/Exposed form finish Ready Mix cement concret Ready Mix C.C. M-30 of trap metal for RCC rectangular grid beam with slab as per detailed design and drawing or as directed including dewatering if necessary, steel centering, formwork, cover blocks, laying/pumping, compacting, curing, finishing and roughening them to form surface with C.M. 1:3 of sufficient minimum thickness to give smooth and even surface or roughening them if special finish is to be provided and curing complete(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant(pan mixer). With fine aggregate(Crushed sand VSI Grade) (Item No. 26.62, Fourth Floor)
38.1
-
-
... More
Providing and laying Cast in situ/Exposed form finish Ready Mix cement concrete C.C. M-30 of trap metal for RCC rectangular grid beam with slab as per detailed design and drawing or as directed including dewatering if necessary, steel centering, formwork, cover blocks, laying/pumping, compacting, curing, finishing and roughening them to form surface with C.M. 1:3 of sufficient minimum thickness to give smooth and even surface or roughening them if special finish is to be provided and curing complete(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant(pan mixer). With fine aggregate(Crushed sand VSI Grade) (Item No. 26.62, Fifth Floor)
38.1
-
-
... More
Providing and laying Cast in situ/Exposed form finish Ready Mix cement concrete C.C. M-30 of trap metal for RCC rectangular grid beam with slab as per detailed design and drawing or as directed including dewatering if necessary, steel centering, formwork, cover blocks, laying/pumping, compacting, curing, finishing and roughening them to form surface with C.M. 1:3 of sufficient minimum thickness to give smooth and even surface or roughening them if special finish is to be provided and curing complete(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant(pan mixer). With fine aggregate(Crushed sand VSI Grade)(Item No. 26.62, Sixth Floor)
38.1
-
-
... More
Providing and laying Cast in situ/Exposed form finish Ready Mix cement concrete C.C. M-30 of trap/quartzite/granite/gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directe including steel centering, plywood/steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete.(Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 26.26)
9.6
-
-
... More
Providing and laying Cast in situ/Exposed form finish Ready Mix cement concrete in M-30 of trap/quartzite/granite/gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directe including steel centering, plywood/steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete.(Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 26.26, First Floor)
6.3
-
-
... More
Providing and laying Cast in situ/Exposed form finish Ready Mix cement concrete in M-30 of trap/quartzite/granite/gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directe including steel centering, plywood/steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete.(Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 26.26, Second Floor)
6.3
-
-
... More
Providing and laying Cast in situ/Exposed form finish Ready Mix cement concrete in M-30 of trap/quartzite/granite/gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directe including steel centering, plywood/steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete.(Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade)(Item No. 26.26, Third Floor)
6.3
-
-
... More
Providing and laying Cast in situ/Exposed form finish Ready Mix cement concrete in M-30 of trap/quartzite/granite/gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directe including steel centering, plywood/steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete.(Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 26.26, Fourth Floor)
6.3
-
-
... More
Providing and laying Cast in situ/Exposed form finish Ready Mix cement concrete in M-30 of trap/quartzite/granite/gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directe including steel centering, plywood/steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete.(Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade)(Item No. 26.26, Fifth Floor)
6.3
-
-
... More
Providing and laying Cast in situ/Exposed form finish Ready Mix cement concrete in M-30 of trap/quartzite/granite/gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directe including steel centering, plywood/steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete.(Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade)(Item No. 26.26, Sixth Floor)
6.3
-
-
... More
Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. (Item No. 26.33)
498.1
-
-
... More
Providing and laying Cast in situ/Exposed Ready Mix cement concrete M-25 of trap/granite/quartzite/gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 26.07)
8.6
-
-
... More
Providing and laying Cast in situ/Exposed Ready Mix cement concrete M-25 of trap/granite/quartzite/gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade)... (Item No. 26.07, First Floor)
9.5
-
-
... More
Providing and laying Cast in situ/Exposed Ready Mix cement concrete M-25 of trap/granite/quartzite/gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade)... (Item No. 26.07, Second Floor)
9.5
-
-
... More
Providing and laying Cast in situ/Exposed Ready Mix cement concrete M-25 of trap/granite/quartzite/gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade)... (Item No. 26.07, Third Floor)
9.5
-
-
... More
Providing and laying Cast in situ/Exposed Ready Mix cement concrete M-25 of trap/granite/quartzite/gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade)... (Item No. 26.07, Fourth Floor)
9.5
-
-
... More
Providing and laying Cast in situ/Exposed Ready Mix cement concrete M-25 of trap/granite/quartzite/gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade)... (Item No. 26.07, Fifth Floor)
9.5
-
-
... More
Providing and laying Cast in situ/Exposed Ready Mix cement concrete M-25 of trap/granite/quartzite/gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade)... (Item No. 26.07, Sixth Floor)
9.5
-
-
... More
Providing and constructing masonry in precast solid Concrete Block(Grade D-50 As per I.S. 2185, Part-I, 1974, Reframed 1987) having compressive strength 5-00 N/mm2) of size(300mm x 200mm x 150mm) in cement mortar 1:6 for superstructure including striking joints on unexposed faces, racking out joints on exposed faces, watering, curing and scaffolding etc. complete. (Item No. 29.03)
92.6
-
-
... More
Providing and constructing masonry in precast solid Concrete Block(Grade D-50 As per I.S. 2185, Part-I, 1974, Reframed 1987) having compressive strength 5-00 N/mm2) of size(300mm x 200mm x 150mm) in cement mortar 1:6 for superstructure including striking joints on unexposed faces, racking out joints on exposed faces, watering, curing and scaffolding etc. complete.... (Item No. 29.03, First Floor)
89.4
-
-
... More
Providing and constructing masonry in precast solid Concrete Block(Grade D-50 As per I.S. 2185, Part-I, 1974, Reframed 1987) having compressive strength 5-00 N/mm2) of size(300mm x 200mm x 150mm) in cement mortar 1:6 for superstructure including striking joints on unexposed faces, racking out joints on exposed faces, watering, curing and scaffolding etc. complete.... (Item No. 29.03, Second Floor)
89.4
-
-
... More
Providing and constructing masonry in precast solid Concrete Block(Grade D-50 As per I.S. 2185, Part-I, 1974, Reframed 1987) having compressive strength 5-00 N/mm2) of size(300mm x 200mm x 150mm) in cement mortar 1:6 for superstructure including striking joints on unexposed faces, racking out joints on exposed faces, watering, curing and scaffolding etc. complete.... (Item No. 29.03, Third Floor)
89.4
-
-
... More
Providing and constructing masonry in precast solid Concrete Block(Grade D-50 As per I.S. 2185, Part-I, 1974, Reframed 1987) having compressive strength 5-00 N/mm2) of size(300mm x 200mm x 150mm) in cement mortar 1:6 for superstructure including striking joints on unexposed faces, racking out joints on exposed faces, watering, curing and scaffolding etc. complete.... (Item No. 29.03, Fourth Floor)
89.4
-
-
... More
Providing and constructing masonry in precast solid Concrete Block(Grade D-50 As per I.S. 2185, Part-I, 1974, Reframed 1987) having compressive strength 5-00 N/mm2) of size(300mm x 200mm x 150mm) in cement mortar 1:6 for superstructure including striking joints on unexposed faces, racking out joints on exposed faces, watering, curing and scaffolding etc. complete.... (Item No. 29.03, Fifth Floor)
89.4
-
-
... More
Providing and constructing masonry in precast solid Concrete Block(Grade D-50 As per I.S. 2185, Part-I, 1974, Reframed 1987) having compressive strength 5-00 N/mm2) of size(300mm x 200mm x 150mm) in cement mortar 1:6 for superstructure including striking joints on unexposed faces, racking out joints on exposed faces, watering, curing and scaffolding etc. complete.... (Item No. 29.03, Sixth Floor)
58.3
-
-
... More
Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185(Part 3)-1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete.(The test shall be carried out conforming to IS:6441(Part I)-1972) (Item No. 27.15)
292.7
-
-
... More
Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185(Part 3)-1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete.(The test shall be carried out conforming to IS:6441(Part I)-1972)... (Item No. 27.15, First Floor)
145.4
-
-
... More
Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185(Part 3)-1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete.(The test shall be carried out conforming to IS:6441(Part I)-1972)... (Item No. 27.15, Second Floor)
145.4
-
-
... More
Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185(Part 3)-1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete.(The test shall be carried out conforming to IS:6441(Part I)-1972)... (Item No. 27.15, Third Floor)
145.4
-
-
... More
Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185(Part 3)-1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete.(The test shall be carried out conforming to IS:6441(Part I)-1972)... (Item No. 27.15, Fourth Floor)
145.4
-
-
... More
Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185(Part 3)-1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete.(The test shall be carried out conforming to IS:6441(Part I)-1972)... (Item No. 27.15, Fifth Floor)
145.4
-
-
... More
Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185(Part 3)-1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete.(The test shall be carried out conforming to IS:6441(Part I)-1972)... (Item No. 27.15, Sixth Floor)
146.4
-
-
... More
Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185(Part 3)-1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete.(The test shall be carried out conforming to IS:6441(Part I)-1972)... (Item No. 27.15, Seventh Floor)
64.5
-
-
... More
Providing and laying damp proof course 50mm thick in M20 cement concrete layer and bitumen/using cement with waterproofing compound curing, formwork etc. complete. (Item No. 31.01)
105
-
-
... More
Providing and laying damp proof course 50mm thick in M20 cement concrete layer and bitumen/using cement with waterproofing compound curing, formwork etc. complete. ... (Item No. 31.01, First Floor)
117.5
-
-
... More
Providing and laying damp proof course 50mm thick in M20 cement concrete layer and bitumen/using cement with waterproofing compound curing, formwork etc. complete. ... (Item No. 31.01, Second Floor)
117.5
-
-
... More
Providing and laying damp proof course 50mm thick in M20 cement concrete layer and bitumen/using cement with waterproofing compound curing, formwork etc. complete. ... (Item No. 31.01, Third Floor)
117.5
-
-
... More
Providing and laying damp proof course 50mm thick in M20 cement concrete layer and bitumen/using cement with waterproofing compound curing, formwork etc. complete. ... (Item No. 31.01, Fourth Floor)
117.5
-
-
... More
Providing and laying damp proof course 50mm thick in M20 cement concrete layer and bitumen/using cement with waterproofing compound curing, formwork etc. complete. ... (Item No. 31.01, Fifth Floor)
117.5
-
-
... More
Providing and laying damp proof course 50mm thick in M20 cement concrete layer and bitumen/using cement with waterproofing compound curing, formwork etc. complete. ... (Item No. 31.01, Sixth Floor)
102.5
-
-
... More
Providing and laying damp proof course 50mm thick in M20 cement concrete layer and bitumen/using cement with waterproofing compound curing, formwork etc. complete. ... (Item No. 31.01, Seventh Floor)
77.5
-
-
... More
Providing and casting in situ/ready mix PCC M20 grade of trap metal for coping to head walls/parapet including centering, form work, compaction and curing etc. complete.(with reversible drum type mixer/concrete batch mix plant(pan mixer) with SCADA with fine agreegates of required specifications(Natural sand/VSI sand finely washed etc) (Item No. 11.31)
25.2
-
-
... More
Providing and casting in situ/ready mix PCC M20 grade of trap metal for coping to head walls/parapet including centering, form work, compaction and curing etc. complete.(with reversible drum type mixer/concrete batch mix plant(pan mixer) with SCADA with fine agreegates of required specifications(Natural sand/VSI sand finely washed etc) ... (Item No. 11.31, First Floor)
28.2
-
-
... More
Providing and casting in situ/ready mix PCC M20 grade of trap metal for coping to head walls/parapet including centering, form work, compaction and curing etc. complete.(with reversible drum type mixer/concrete batch mix plant(pan mixer) with SCADA with fine agreegates of required specifications(Natural sand/VSI sand finely washed etc) ... (Item No. 11.31, Second Floor)
28.2
-
-
... More
Providing and casting in situ/ready mix PCC M20 grade of trap metal for coping to head walls/parapet including centering, form work, compaction and curing etc. complete.(with reversible drum type mixer/concrete batch mix plant(pan mixer) with SCADA with fine agreegates of required specifications(Natural sand/VSI sand finely washed etc) ... (Item No. 11.31, Third Floor)
28.2
-
-
... More
Providing and casting in situ/ready mix PCC M20 grade of trap metal for coping to head walls/parapet including centering, form work, compaction and curing etc. complete.(with reversible drum type mixer/concrete batch mix plant(pan mixer) with SCADA with fine agreegates of required specifications(Natural sand/VSI sand finely washed etc) ... (Item No. 11.31, Fourth Floor)
28.2
-
-
... More
Providing and casting in situ/ready mix PCC M20 grade of trap metal for coping to head walls/parapet including centering, form work, compaction and curing etc. complete.(with reversible drum type mixer/concrete batch mix plant(pan mixer) with SCADA with fine agreegates of required specifications(Natural sand/VSI sand finely washed etc) ... (Item No. 11.31, Fifth Floor)
28.2
-
-
... More
Providing and casting in situ/ready mix PCC M20 grade of trap metal for coping to head walls/parapet including centering, form work, compaction and curing etc. complete.(with reversible drum type mixer/concrete batch mix plant(pan mixer) with SCADA with fine agreegates of required specifications(Natural sand/VSI sand finely washed etc) ... (Item No. 11.31, Sixth Floor)
24.6
-
-
... More
Providing and casting in situ/ready mix PCC M20 grade of trap metal for coping to head walls/parapet including centering, form work, compaction and curing etc. complete.(with reversible drum type mixer/concrete batch mix plant(pan mixer) with SCADA with fine agreegates of required specifications(Natural sand/VSI sand finely washed etc) ... (Item No. 11.31, Seventh Floor)
9.3
-
-
... More
Providing and fixing chicken mesh of 22 gauge, with about 30cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete/B.B.masonry and or tying by binding wire etc. complete. (Item No. 32.26)
700
-
-
... More
Providing and fixing chicken mesh of 22 gauge, with about 30cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete/B.B.masonry and or tying by binding wire etc. complete.... (Item No. 32.26, First Floor)
770
-
-
... More
Providing and fixing chicken mesh of 22 gauge, with about 30cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete/B.B.masonry and or tying by binding wire etc. complete.... (Item No. 32.26, Second Floor)
770
-
-
... More
Providing and fixing chicken mesh of 22 gauge, with about 30cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete/B.B.masonry and or tying by binding wire etc. complete.... (Item No. 32.26, Third Floor)
770
-
-
... More
Providing and fixing chicken mesh of 22 gauge, with about 30cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete/B.B.masonry and or tying by binding wire etc. complete.... (Item No. 32.26, Fourth Floor)
770
-
-
... More
Providing and fixing chicken mesh of 22 gauge, with about 30cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete/B.B.masonry and or tying by binding wire etc. complete.... (Item No. 32.26, Fifth Floor)
770
-
-
... More
Providing and fixing chicken mesh of 22 gauge, with about 30cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete/B.B.masonry and or tying by binding wire etc. complete.... (Item No. 32.26, Sixth Floor)
592
-
-
... More
Providing and fixing chicken mesh of 22 gauge, with about 30cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete/B.B.masonry and or tying by binding wire etc. complete.... (Item No. 32.26, Seventh Floor)
310
-
-
... More
Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness incm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding incm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete. (Item No. 31.26, First Floor)
8
-
-
... More
Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness incm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding incm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete. ... (Item No. 31.26, Second Floor)
8
-
-
... More
Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness incm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding incm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete. ... (Item No. 31.26, Third Floor)
8
-
-
... More
Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness incm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding incm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete. ... (Item No. 31.26, Fourth Floor)
8
-
-
... More
Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness incm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding incm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete. ... (Item No. 31.26, Fifth Floor)
8
-
-
... More
Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness incm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding incm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete. ... (Item No. 31.26, Sixth Floor)
6.9
-
-
... More
Providing waterproof plaster in W.C. and bath 12mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 Kilogram. per bag of cement of approved make and manufacturer and curing etc. complete.(Excluding Tiles)(As directed by Engineer in Charge) (Item No. 31.06)
251.2
-
-
... More
Providing waterproof plaster in W.C. and bath 12mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 Kilogram. per bag of cement of approved make and manufacturer and curing etc. complete.(Excluding Tiles)(As directed by Engineer in Charge) ... (Item No. 31.06, First Floor)
657.9
-
-
... More
Providing waterproof plaster in W.C. and bath 12mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 Kilogram. per bag of cement of approved make and manufacturer and curing etc. complete.(Excluding Tiles)(As directed by Engineer in Charge) ... (Item No. 31.06, Second Floor)
657.9
-
-
... More
Providing waterproof plaster in W.C. and bath 12mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 Kilogram. per bag of cement of approved make and manufacturer and curing etc. complete.(Excluding Tiles)(As directed by Engineer in Charge) ... (Item No. 31.06, Third Floor)
657.9
-
-
... More
Providing waterproof plaster in W.C. and bath 12mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 Kilogram. per bag of cement of approved make and manufacturer and curing etc. complete.(Excluding Tiles)(As directed by Engineer in Charge) ... (Item No. 31.06, Fourth Floor)
657.9
-
-
... More
Providing waterproof plaster in W.C. and bath 12mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 Kilogram. per bag of cement of approved make and manufacturer and curing etc. complete.(Excluding Tiles)(As directed by Engineer in Charge) ... (Item No. 31.06, Fifth Floor)
657.9
-
-
... More
Providing waterproof plaster in W.C. and bath 12mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 Kilogram. per bag of cement of approved make and manufacturer and curing etc. complete.(Excluding Tiles)(As directed by Engineer in Charge) ... (Item No. 31.06, Sixth Floor)
469.1
-
-
... More
Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. (Item No. 32.04)
248.9
-
-
... More
Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. ... (Item No. 32.04, First Floor)
36.1
-
-
... More
Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. ... (Item No. 32.04, Second Floor)
36.1
-
-
... More
Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. ... (Item No. 32.04, Second Floor)
36.1
-
-
... More
Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. ... (Item No. 32.04, Third Floor)
36.1
-
-
... More
Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. ... (Item No. 32.04, Fourth Floor)
36.1
-
-
... More
Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. ... (Item No. 32.04, Fifth Floor)
36.1
-
-
... More
Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. ... (Item No. 32.04, Sixth Floor)
36.1
-
-
... More
Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5mm thickness in Global white color tile to be laid on grid systems with 15mm wide T-section flanges color white having rotary stitching on the Main Runner, 1200mm and 600mm Cross Tees.Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5mm thickness in Global white color tile to be laid on grid systems with 15mm wide T-section flanges color white having rotary stitching on the Main Runner, 1200mm and 600mm Cross Tees.products approved as per GRIHA and BS 476 etc. complete. (Item No. 38.48)
114
-
-
... More
Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5mm thickness in Global white color tile to be laid on grid systems with 15mm wide T-section flanges color white having rotary stitching on the Main Runner, 1200mm and 600mm Cross Tees.Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5mm thickness in Global white color tile to be laid on grid systems with 15mm wide T-section flanges color white having rotary stitching on the Main Runner, 1200mm and 600mm Cross Tees.products approved as per GRIHA and BS 476 etc. complete. ... (Item No. 38.48, First Floor)
115.7
-
-
... More
Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5mm thickness in Global white color tile to be laid on grid systems with 15mm wide T-section flanges color white having rotary stitching on the Main Runner, 1200mm and 600mm Cross Tees.Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5mm thickness in Global white color tile to be laid on grid systems with 15mm wide T-section flanges color white having rotary stitching on the Main Runner, 1200mm and 600mm Cross Tees.products approved as per GRIHA and BS 476 etc. complete. ... (Item No. 38.48, Second Floor)
115.7
-
-
... More
Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5mm thickness in Global white color tile to be laid on grid systems with 15mm wide T-section flanges color white having rotary stitching on the Main Runner, 1200mm and 600mm Cross Tees.Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5mm thickness in Global white color tile to be laid on grid systems with 15mm wide T-section flanges color white having rotary stitching on the Main Runner, 1200mm and 600mm Cross Tees.products approved as per GRIHA and BS 476 etc. complete. ... (Item No. 38.48, Third Floor)
115.7
-
-
... More
Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5mm thickness in Global white color tile to be laid on grid systems with 15mm wide T-section flanges color white having rotary stitching on the Main Runner, 1200mm and 600mm Cross Tees.Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5mm thickness in Global white color tile to be laid on grid systems with 15mm wide T-section flanges color white having rotary stitching on the Main Runner, 1200mm and 600mm Cross Tees.products approved as per GRIHA and BS 476 etc. complete. ... (Item No. 38.48, Fourth Floor)
115.7
-
-
... More
Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5mm thickness in Global white color tile to be laid on grid systems with 15mm wide T-section flanges color white having rotary stitching on the Main Runner, 1200mm and 600mm Cross Tees.Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5mm thickness in Global white color tile to be laid on grid systems with 15mm wide T-section flanges color white having rotary stitching on the Main Runner, 1200mm and 600mm Cross Tees.products approved as per GRIHA and BS 476 etc. complete. ... (Item No. 38.48, Fifth Floor)
115.7
-
-
... More
Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5mm thickness in Global white color tile to be laid on grid systems with 15mm wide T-section flanges color white having rotary stitching on the Main Runner, 1200mm and 600mm Cross Tees.Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5mm thickness in Global white color tile to be laid on grid systems with 15mm wide T-section flanges color white having rotary stitching on the Main Runner, 1200mm and 600mm Cross Tees.products approved as per GRIHA and BS 476 etc. complete. ... (Item No. 38.48, Sixth Floor)
94.5
-
-
... More
Providing and fixing Modular false ceiling of 600 x 600mm center to center and 13mm thick square mineral fiber board to be fixed on frame work of alluminium sections for suspended false ceiling consisting of alluminium T 2"x1 "(50mm x 40mm) weighing 0.39 Kilogram/m at 60cms center center and fixed with " x "(15 x 15mm) flanges weighing 0.19 Kilogram/m suspended on 6mm dia mild steel rod weighing 0.22 Kilogram/m, fixed on wall and beams including rounding of the edges with alluinium T of 2" x 1 "(50mm x 40mm) weighing 0.39 Kilogram/m etc.(all alluminium sections shall be anodized) including all labour, material, lifts etc. complete. (Item No. 38.52)
155
-
-
... More
Providing and fixing in position Gypsum board false ceiling with 12.5mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete. (Item No. 38.51)
42
-
-
... More
Providing and applying gypsum plaster(with Gypsum material) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface/or on newly brick surface(Excluding rough cast plaster) in all position including preparing and Finishing the surface scaffolding etc.complete. (Item No. 32.31)
2342.5
-
-
... More
Providing and applying gypsum plaster(with Gypsum material) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface/or on newly brick surface(Excluding rough cast plaster) in all position including preparing and Finishing the surface scaffolding etc.complete. ... (Item No. 32.31, First Floor)
1749.7
-
-
... More
Providing and applying gypsum plaster(with Gypsum material) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface/or on newly brick surface(Excluding rough cast plaster) in all position including preparing and Finishing the surface scaffolding etc.complete. ... (Item No. 32.31, Second Floor)
1749.7
-
-
... More
Providing and applying gypsum plaster(with Gypsum material) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface/or on newly brick surface(Excluding rough cast plaster) in all position including preparing and Finishing the surface scaffolding etc.complete. ... (Item No. 32.31, Third Floor)
1749.7
-
-
... More
Providing and applying gypsum plaster(with Gypsum material) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface/or on newly brick surface(Excluding rough cast plaster) in all position including preparing and Finishing the surface scaffolding etc.complete. ... (Item No. 32.31, Fourth Floor)
1749.7
-
-
... More
Providing and applying gypsum plaster(with Gypsum material) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface/or on newly brick surface(Excluding rough cast plaster) in all position including preparing and Finishing the surface scaffolding etc.complete. ... (Item No. 32.31, Fifth Floor)
1749.7
-
-
... More
Providing and applying gypsum plaster(with Gypsum material) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface/or on newly brick surface(Excluding rough cast plaster) in all position including preparing and Finishing the surface scaffolding etc.complete. ... (Item No. 32.31, Sixth Floor)
1341
-
-
... More
Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. (Item No. 32.34)
2692.7
-
-
... More
Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. ... (Item No. 32.34, First Floor)
2427.9
-
-
... More
Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. ... (Item No. 32.34, Second Floor)
2427.9
-
-
... More
Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. ... (Item No. 32.34, Third Floor)
2427.9
-
-
... More
Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. ... (Item No. 32.34, Fourth Floor)
2427.9
-
-
... More
Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. ... (Item No. 32.34, Fifth Floor)
2427.9
-
-
... More
Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. ... (Item No. 32.34, Sixth Floor)
1943.1
-
-
... More
Providing and applying priming coat on concrete/masonary/Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. (Item No. 35.21)
2692.7
-
-
... More
Providing and applying priming coat on concrete/masonary/Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.... (Item No. 35.21, First Floor)
2427.9
-
-
... More
Providing and applying priming coat on concrete/masonary/Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.... (Item No. 35.21, Second Floor)
2427.9
-
-
... More
Providing and applying priming coat on concrete/masonary/Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.... (Item No. 35.21, Third Floor)
2427.9
-
-
... More
Providing and applying priming coat on concrete/masonary/Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.... (Item No. 35.21, Fourth Floor)
2427.9
-
-
... More
Providing and applying priming coat on concrete/masonary/Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.... (Item No. 35.21, Fifth Floor)
2427.9
-
-
... More
Providing and applying priming coat on concrete/masonary/Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.... (Item No. 35.21, Sixth Floor)
1943.1
-
-
... More
Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces.(excluding the primer coat.) etc. complete. (Item No. 36.11)
2692.7
-
-
... More
Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces.(excluding the primer coat.) etc. complete. ... (Item No. 36.11, First Floor)
2427.9
-
-
... More
Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces.(excluding the primer coat.) etc. complete. ... (Item No. 36.11, Second Floor)
2427.9
-
-
... More
Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces.(excluding the primer coat.) etc. complete. ... (Item No. 36.11, Third Floor)
2427.9
-
-
... More
Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces.(excluding the primer coat.) etc. complete. ... (Item No. 36.11, Fourth Floor)
2427.9
-
-
... More
Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces.(excluding the primer coat.) etc. complete. ... (Item No. 36.11, Fifth Floor)
2427.9
-
-
... More
Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces.(excluding the primer coat.) etc. complete. ... (Item No. 36.11, Sixth Floor)
1943.1
-
-
... More
Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15mm thick in C.M. 1:4 and rough cast treatment 12mm thick in proportion 1:1 1/2:3 including scaffolding and fourteen days curing complete. (Item No. 32.12)
941.8
-
-
... More
Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15mm thick in C.M. 1:4 and rough cast treatment 12mm thick in proportion 1:1 1/2:3 including scaffolding and fourteen days curing complete. ... (Item No. 32.12, First Floor)
529.7
-
-
... More
Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15mm thick in C.M. 1:4 and rough cast treatment 12mm thick in proportion 1:1 1/2:3 including scaffolding and fourteen days curing complete. ... (Item No. 32.12, Second Floor)
529.6
-
-
... More
Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15mm thick in C.M. 1:4 and rough cast treatment 12mm thick in proportion 1:1 1/2:3 including scaffolding and fourteen days curing complete. ... (Item No. 32.12, Third Floor)
529.7
-
-
... More
Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15mm thick in C.M. 1:4 and rough cast treatment 12mm thick in proportion 1:1 1/2:3 including scaffolding and fourteen days curing complete. ... (Item No. 32.12, Fourth Floor)
529.7
-
-
... More
Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15mm thick in C.M. 1:4 and rough cast treatment 12mm thick in proportion 1:1 1/2:3 including scaffolding and fourteen days curing complete. ... (Item No. 32.12, Fifth Floor)
529.7
-
-
... More
Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15mm thick in C.M. 1:4 and rough cast treatment 12mm thick in proportion 1:1 1/2:3 including scaffolding and fourteen days curing complete. ... (Item No. 32.12, Sixth Floor)
529.7
-
-
... More
Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15mm thick in C.M. 1:4 and rough cast treatment 12mm thick in proportion 1:1 1/2:3 including scaffolding and fourteen days curing complete. ... (Item No. 32.12, Seventh Floor)
394.8
-
-
... More
Supplying & providing approved colour washed stone crete plaster 1:0:5:2 (1cement: 0.5 dolomite powder: 2 stone chipping 10mm nominal size) in panels all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings, complete as per specification and direction of Engineer in 50% white cement and 50% ordinary grey cement in top layer including scaffolding staging etc complete.
941.8
-
-
... More
Supplying & providing approved colour washed stone crete plaster 1:0:5:2 (1cement: 0.5 dolomite powder: 2 stone chipping 10mm nominal size) in panels all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings, complete as per specification and direction of Engineer in 50% white cement and 50% ordinary grey cement in top layer including scaffolding staging etc complete. (First Floor)
529.7
-
-
... More
Supplying & providing approved colour washed stone crete plaster 1:0:5:2 (1cement: 0.5 dolomite powder: 2 stone chipping 10mm nominal size) in panels all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings, complete as per specification and direction of Engineer in 50% white cement and 50% ordinary grey cement in top layer including scaffolding staging etc complete. ... (Second Floor)
529.6
-
-
... More
Supplying & providing approved colour washed stone crete plaster 1:0:5:2 (1cement: 0.5 dolomite powder: 2 stone chipping 10mm nominal size) in panels all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings, complete as per specification and direction of Engineer in 50% white cement and 50% ordinary grey cement in top layer including scaffolding staging etc complete. ... (Third Floor)
529.6
-
-
... More
Supplying & providing approved colour washed stone crete plaster 1:0:5:2 (1cement: 0.5 dolomite powder: 2 stone chipping 10mm nominal size) in panels all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings, complete as per specification and direction of Engineer in 50% white cement and 50% ordinary grey cement in top layer including scaffolding staging etc complete. ... (Fourth Floor)
529.6
-
-
... More
Supplying & providing approved colour washed stone crete plaster 1:0:5:2 (1cement: 0.5 dolomite powder: 2 stone chipping 10mm nominal size) in panels all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings, complete as per specification and direction of Engineer in 50% white cement and 50% ordinary grey cement in top layer including scaffolding staging etc complete. ... (Fifth Floor)
529.7
-
-
... More
Supplying & providing approved colour washed stone crete plaster 1:0:5:2 (1cement: 0.5 dolomite powder: 2 stone chipping 10mm nominal size) in panels all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings, complete as per specification and direction of Engineer in 50% white cement and 50% ordinary grey cement in top layer including scaffolding staging etc complete. ... (Sixth Floor)
529.6
-
-
... More
Supplying & providing approved colour washed stone crete plaster 1:0:5:2 (1cement: 0.5 dolomite powder: 2 stone chipping 10mm nominal size) in panels all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings, complete as per specification and direction of Engineer in 50% white cement and 50% ordinary grey cement in top layer including scaffolding staging etc complete. ... (Seventh Floor)
394.8
-
-
... More
Providing and laying telephone black/Amba White/Cadburybrown/Ruby red/Ocean Brown granite stone of 18 to 20mm thick for door frame/dado/window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete. (Item No. 33.68)
78
-
-
... More
Providing and laying telephone black/Amba White/Cadburybrown/Ruby red/Ocean Brown granite stone of 18 to 20mm thick for door frame/dado/window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete. ... (Item No. 33.68, First Floor)
117.9
-
-
... More
Providing and laying telephone black/Amba White/Cadburybrown/Ruby red/Ocean Brown granite stone of 18 to 20mm thick for door frame/dado/window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete. ... (Item No. 33.68, Second Floor)
117.9
-
-
... More
Providing and laying telephone black/Amba White/Cadburybrown/Ruby red/Ocean Brown granite stone of 18 to 20mm thick for door frame/dado/window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete... (Item No. 33.68, Third Floor)
117.9
-
-
... More
Providing and laying telephone black/Amba White/Cadburybrown/Ruby red/Ocean Brown granite stone of 18 to 20mm thick for door frame/dado/window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete... (Item No. 33.68, Third Floor)
117.9
-
-
... More
Providing and laying telephone black/Amba White/Cadburybrown/Ruby red/Ocean Brown granite stone of 18 to 20mm thick for door frame/dado/window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete... (Item No. 33.68, Fourth Floor)
117.9
-
-
... More
Providing and laying telephone black/Amba White/Cadburybrown/Ruby red/Ocean Brown granite stone of 18 to 20mm thick for door frame/dado/window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete... (Item No. 33.68, Fifth Floor)
117.9
-
-
... More
Providing and laying telephone black/Amba White/Cadburybrown/Ruby red/Ocean Brown granite stone of 18 to 20mm thick for door frame/dado/window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete... (Item No. 33.68, Sixth Floor)
105.5
-
-
... More
Providing sills of required material 20mm to 25mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, moulding edges, polishing, cleaning complete. b) Granite (Item No. 33.22)
55.1
-
-
... More
Providing sills of required material 20mm to 25mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, moulding edges, polishing, cleaning complete. b) Granite ... (Item No. 33.22, First Floor)
6
-
-
... More
Providing sills of required material 20mm to 25mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, moulding edges, polishing, cleaning complete. b) Granite ... (Item No. 33.22, Second Floor)
6
-
-
... More
Providing sills of required material 20mm to 25mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, moulding edges, polishing, cleaning complete. b) Granite ... (Item No. 33.22, Third Floor)
6
-
-
... More
Providing sills of required material 20mm to 25mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, moulding edges, polishing, cleaning complete. b) Granite ... (Item No. 33.22, Fourth Floor)
6
-
-
... More
Providing sills of required material 20mm to 25mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, moulding edges, polishing, cleaning complete. b) Granite ... (Item No. 33.22, Fifth Floor)
6
-
-
... More
Providing sills of required material 20mm to 25mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, moulding edges, polishing, cleaning complete. b) Granite ... (Item No. 33.22, Sixth Floor)
25.1
-
-
... More
Providing and fixing in position powder coated aluminium louvered windows/ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38mm x 1.22mm box type, 5mm thick sheet glass louvers, of approved quality etc. complete. (Item No. 39.68)
10.5
-
-
... More
Providing and fixing in position powder coated aluminium louvered windows/ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38mm x 1.22mm box type, 5mm thick sheet glass louvers, of approved quality etc. complete. ... (Item No. 39.68, First Floor)
5
-
-
... More
Providing and fixing in position powder coated aluminium louvered windows/ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38mm x 1.22mm box type, 5mm thick sheet glass louvers, of approved quality etc. complete. ... (Item No. 39.68, Second Floor)
5
-
-
... More
Providing and fixing in position powder coated aluminium louvered windows/ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38mm x 1.22mm box type, 5mm thick sheet glass louvers, of approved quality etc. complete. ... (Item No. 39.68, Third Floor)
5
-
-
... More
Providing and fixing in position powder coated aluminium louvered windows/ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38mm x 1.22mm box type, 5mm thick sheet glass louvers, of approved quality etc. complete. ... (Item No. 39.68, Fourth Floor)
5
-
-
... More
Providing and fixing in position powder coated aluminium louvered windows/ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38mm x 1.22mm box type, 5mm thick sheet glass louvers, of approved quality etc. complete. ... (Item No. 39.68, Fifth Floor)
5
-
-
... More
Providing and fixing in position powder coated aluminium louvered windows/ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38mm x 1.22mm box type, 5mm thick sheet glass louvers, of approved quality etc. complete. ... (Item No. 39.68, Sixth Floor)
3.5
-
-
... More
Providing and fixing 12mm toughened glass door shutter with fittings etc complete.
95.8
-
-
... More
Providing and fixing in position(as per 1868/1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90mm at weight 0.637 Kilogram/running metre. with window frame bottom track section 92 x 31.75 x 1.30mm at weight 1.070 Kilogram/running metre.. Top and side track section 92 x 31.75 x 1.30mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25mm at weight 0.417 Kilogram/running metre. Inter locking section 40 x 18 x 1.10mm at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box (Item No. 39.41)
112.2
-
-
... More
Providing and fixing in position(as per 1868/1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90mm at weight 0.637 Kilogram/running metre. with window frame bottom track section 92 x 31.75 x 1.30mm at weight 1.070 Kilogram/running metre.. Top and side track section 92 x 31.75 x 1.30mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25mm at weight 0.417 Kilogram/running metre. Inter locking section 40 x 18 x 1.10mm at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box ... (Item No. 39.41, First Floor)
141.2
-
-
... More
Providing and fixing in position(as per 1868/1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90mm at weight 0.637 Kilogram/running metre. with window frame bottom track section 92 x 31.75 x 1.30mm at weight 1.070 Kilogram/running metre.. Top and side track section 92 x 31.75 x 1.30mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25mm at weight 0.417 Kilogram/running metre. Inter locking section 40 x 18 x 1.10mm at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box ... (Item No. 39.41, Second Floor)
141.2
-
-
... More
Providing and fixing in position(as per 1868/1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90mm at weight 0.637 Kilogram/running metre. with window frame bottom track section 92 x 31.75 x 1.30mm at weight 1.070 Kilogram/running metre.. Top and side track section 92 x 31.75 x 1.30mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25mm at weight 0.417 Kilogram/running metre. Inter locking section 40 x 18 x 1.10mm at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box ... (Item No. 39.41, Third Floor)
141.2
-
-
... More
Providing and fixing in position(as per 1868/1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90mm at weight 0.637 Kilogram/running metre. with window frame bottom track section 92 x 31.75 x 1.30mm at weight 1.070 Kilogram/running metre.. Top and side track section 92 x 31.75 x 1.30mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25mm at weight 0.417 Kilogram/running metre. Inter locking section 40 x 18 x 1.10mm at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box ... (Item No. 39.41, Fourth Floor)
141.2
-
-
... More
Providing and fixing in position(as per 1868/1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90mm at weight 0.637 Kilogram/running metre. with window frame bottom track section 92 x 31.75 x 1.30mm at weight 1.070 Kilogram/running metre.. Top and side track section 92 x 31.75 x 1.30mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25mm at weight 0.417 Kilogram/running metre. Inter locking section 40 x 18 x 1.10mm at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box ... (Item No. 39.41, Fifth Floor)
141.2
-
-
... More
Providing and fixing in position(as per 1868/1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90mm at weight 0.637 Kilogram/running metre. with window frame bottom track section 92 x 31.75 x 1.30mm at weight 1.070 Kilogram/running metre.. Top and side track section 92 x 31.75 x 1.30mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25mm at weight 0.417 Kilogram/running metre. Inter locking section 40 x 18 x 1.10mm at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box ... (Item No. 39.41, Sixth Floor)
141.2
-
-
... More
Providing and fixing aluminium grill diamond mesh type DG202 of 7.5mm thick including fixing in position anodised aluminium frame section of 80 x 38mm x 1.22mm size box, cutting to the required size with all wastage, labour, lead lift etc. complete. (Item No. 39.76)
12.7
-
-
... More
Providing and fixing aluminium grill diamond mesh type DG202 of 7.5mm thick including fixing in position anodised aluminium frame section of 80 x 38mm x 1.22mm size box, cutting to the required size with all wastage, labour, lead lift etc. complete. ... (Item No. 39.76, First Floor)
44.6
-
-
... More
Providing and fixing aluminium grill diamond mesh type DG202 of 7.5mm thick including fixing in position anodised aluminium frame section of 80 x 38mm x 1.22mm size box, cutting to the required size with all wastage, labour, lead lift etc. complete. ... (Item No. 39.76, Second Floor)
44.6
-
-
... More
Providing and fixing aluminium grill diamond mesh type DG202 of 7.5mm thick including fixing in position anodised aluminium frame section of 80 x 38mm x 1.22mm size box, cutting to the required size with all wastage, labour, lead lift etc. complete. ... (Item No. 39.76, Third Floor)
44.6
-
-
... More
Providing and fixing aluminium grill diamond mesh type DG202 of 7.5mm thick including fixing in position anodised aluminium frame section of 80 x 38mm x 1.22mm size box, cutting to the required size with all wastage, labour, lead lift etc. complete. ... (Item No. 39.76, Fourth Floor)
44.6
-
-
... More
Providing and fixing aluminium grill diamond mesh type DG202 of 7.5mm thick including fixing in position anodised aluminium frame section of 80 x 38mm x 1.22mm size box, cutting to the required size with all wastage, labour, lead lift etc. complete. ... (Item No. 39.76, Fifth Floor)
44.6
-
-
... More
Providing and fixing aluminium grill diamond mesh type DG202 of 7.5mm thick including fixing in position anodised aluminium frame section of 80 x 38mm x 1.22mm size box, cutting to the required size with all wastage, labour, lead lift etc. complete. ... (Item No. 39.76, Sixth Floor)
44.6
-
-
... More
Providing and Fixing MS railing with top pipe of 50mm dia. and vertical pipe of 38mm dia at 0.60m c/c or as required and horizontal pipes of 25mm dia in three rows, all pipes of 2mm thick including buffing, fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75mm dia above newel post of 75mm diameter etc.The handrail, horizontal pipes, verticles, bends to be finished with three coats of approved synthetic enamel paint from approved make inclusive of all surface preparation with Zinc chromate primer as specific etc complete.
186.4
-
-
... More
Providing and fixing solid core flush door shutter in double leaf 32mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. (Item No. 39.95)
32.4
-
-
... More
Providing and fixing solid core flush door shutter in double leaf 32mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. ... (Item No. 39.95, Sixth Floor)
6.8
-
-
... More
Providing and fixing frame with/without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete (Item No. 39.01)
1.9
-
-
... More
Providing and fixing frame with/without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete ... (Item No. 39.01, First Floor)
2.2
-
-
... More
Providing and fixing frame with/without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete ... (Item No. 39.01, Second Floor)
2.2
-
-
... More
Providing and fixing frame with/without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete ... (Item No. 39.01, Third Floor)
2.2
-
-
... More
Providing and fixing frame with/without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete ... (Item No. 39.01, Fourth Floor)
2.2
-
-
... More
Providing and fixing frame with/without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete ... (Item No. 39.01, Fifth Floor)
2.2
-
-
... More
Providing and fixing frame with/without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete ... (Item No. 39.01, Sixth Floor)
1.4
-
-
... More
Providing and fixing solid core flush door shutter in single leaf 32mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. (Item No. 39.09)
50.9
-
-
... More
Providing and fixing solid core flush door shutter in single leaf 32mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. ... (Item No. 39.09, First Floor)
81
-
-
... More
Providing and fixing solid core flush door shutter in single leaf 32mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. ... (Item No. 39.09, Second Floor)
81
-
-
... More
Providing and fixing solid core flush door shutter in single leaf 32mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. ... (Item No. 39.09, Third Floor)
81
-
-
... More
Providing and fixing solid core flush door shutter in single leaf 32mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. ... (Item No. 39.09, Fourth Floor)
81
-
-
... More
Providing and fixing solid core flush door shutter in single leaf 32mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. ... (Item No. 39.09, Fifth Floor)
81
-
-
... More
Providing and fixing solid core flush door shutter in single leaf 32mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. ... (Item No. 39.09, Sixth Floor)
51.8
-
-
... More
Providing and laying in position flooring and skirting of telephone black/Amba White/Cat bary brown/Ruby red/Ocean Brown granite stone of approved shade and size 18mm to 20mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. (Item No. 33.34)
1085.7
-
-
... More
Providing and laying in position flooring and skirting of telephone black/Amba White/Cat bary brown/Ruby red/Ocean Brown granite stone of approved shade and size 18mm to 20mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. ... (Item No. 33.34, First Floor)
734
-
-
... More
Providing and laying in position flooring and skirting of telephone black/Amba White/Cat bary brown/Ruby red/Ocean Brown granite stone of approved shade and size 18mm to 20mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. ... (Item No. 33.34, Second Floor)
734
-
-
... More
Providing and laying in position flooring and skirting of telephone black/Amba White/Cat bary brown/Ruby red/Ocean Brown granite stone of approved shade and size 18mm to 20mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. ... (Item No. 33.34, Third Floor)
734
-
-
... More
Providing and laying in position flooring and skirting of telephone black/Amba White/Cat bary brown/Ruby red/Ocean Brown granite stone of approved shade and size 18mm to 20mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. ... (Item No. 33.34, Fourth Floor)
734
-
-
... More
Providing and laying in position flooring and skirting of telephone black/Amba White/Cat bary brown/Ruby red/Ocean Brown granite stone of approved shade and size 18mm to 20mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. ... (Item No. 33.34, Fifth Floor)
734
-
-
... More
Providing and laying in position flooring and skirting of telephone black/Amba White/Cat bary brown/Ruby red/Ocean Brown granite stone of approved shade and size 18mm to 20mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. ... (Item No. 33.34, Sixth Floor)
519.9
-
-
... More
Providing and laying polished hand cut Kotah Stone flooring 25mm to 30mm thick and 45cm to 55cm wide in plain/diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning complete. (Item No. 33.08)
183.2
-
-
... More
Providing and laying polished hand cut Kotah Stone flooring 25mm to 30mm thick and 45cm to 55cm wide in plain/diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning complete. ... (Item No. 33.08, Sixth Floor)
242.6
-
-
... More
Providing and fixing high polished granite stone for wall cladding having stones 25mm to 30mm thick and required width in 1:3 cement mortar including cement float, filling joints with neat cement slurry, curing, cleaning complete.
191.3
-
-
... More
Providing and fixing high polished granite stone for wall cladding having stones 25mm to 30mm thick and required width in 1:3 cement mortar including cement float, filling joints with neat cement slurry, curing, cleaning complete.... (First Floor)
23.3
-
-
... More
Providing and fixing high polished granite stone for wall cladding having stones 25mm to 30mm thick and required width in 1:3 cement mortar including cement float, filling joints with neat cement slurry, curing, cleaning complete.... (Second Floor)
23.3
-
-
... More
Providing and fixing high polished granite stone for wall cladding having stones 25mm to 30mm thick and required width in 1:3 cement mortar including cement float, filling joints with neat cement slurry, curing, cleaning complete.... (Third Floor)
23.3
-
-
... More
Providing and fixing high polished granite stone for wall cladding having stones 25mm to 30mm thick and required width in 1:3 cement mortar including cement float, filling joints with neat cement slurry, curing, cleaning complete.... (Fourth Floor)
23.3
-
-
... More
Providing and fixing high polished granite stone for wall cladding having stones 25mm to 30mm thick and required width in 1:3 cement mortar including cement float, filling joints with neat cement slurry, curing, cleaning complete.... (Fifth Floor)
23.3
-
-
... More
Providing and fixing high polished granite stone for wall cladding having stones 25mm to 30mm thick and required width in 1:3 cement mortar including cement float, filling joints with neat cement slurry, curing, cleaning complete.... (Sixth Floor)
23.3
-
-
... More
Providing and fixing high polished kota stone for wall cladding having stones 25mm to 30mm thick and required width in 1:3 cement mortar including cement float, filling joints with neat cement slurry, curing, cleaning complete.
73.2
-
-
... More
Providing and laying vitrified matt fininsh tiles having size 590mm to 605mm x to 605mm of 8 to 10mm thickness and confirming IS. 15622-2006(Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. (Item No. 33.42)
156.7
-
-
... More
Providing and laying vitrified matt fininsh tiles having size 590mm to 605mm x to 605mm of 8 to 10mm thickness and confirming IS. 15622-2006(Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. (Item No. 33.42, First Floor)
176.5
-
-
... More
Providing and laying vitrified matt fininsh tiles having size 590mm to 605mm x to 605mm of 8 to 10mm thickness and confirming IS. 15622-2006(Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete.(Item No. 33.42, Second Floor)
176.5
-
-
... More
Providing and laying vitrified matt fininsh tiles having size 590mm to 605mm x to 605mm of 8 to 10mm thickness and confirming IS. 15622-2006(Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete.(Item No. 33.42, Third Floor)
176.5
-
-
... More
Providing and laying vitrified matt fininsh tiles having size 590mm to 605mm x to 605mm of 8 to 10mm thickness and confirming IS. 15622-2006(Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete.(Item No. 33.42, Fourth Floor)
176.5
-
-
... More
Providing and laying vitrified matt fininsh tiles having size 590mm to 605mm x to 605mm of 8 to 10mm thickness and confirming IS. 15622-2006(Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete.(Item No. 33.42, Fifth Floor)
176.5
-
-
... More
Providing and laying vitrified matt fininsh tiles having size 590mm to 605mm x to 605mm of 8 to 10mm thickness and confirming IS. 15622-2006(Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete.(Item No. 33.42, Sixth Floor)
125.6
-
-
... More
Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. (Item No. 33.18)
73.5
-
-
... More
Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. ... (Item No. 33.18, First Floor)
43.7
-
-
... More
Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. ... (Item No. 33.18, Second Floor)
43.7
-
-
... More
Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. ... (Item No. 33.18, Third Floor)
43.7
-
-
... More
Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. ... (Item No. 33.18, Fourth Floor)
43.7
-
-
... More
Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. ... (Item No. 33.18, Fifth Floor)
43.7
-
-
... More
Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. ... (Item No. 33.18, Sixth Floor)
43.7
-
-
... More
Providing and laying ceramic tiles having size 30cm. x 45cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/colour cement slurry cleaning curing etc. complete. (Item No. 33.26)
209.7
-
-
... More
Providing and laying ceramic tiles having size 30cm. x 45cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/colour cement slurry cleaning curing etc. complete. ... (Item No. 33.26, First Floor)
437.5
-
-
... More
Providing and laying ceramic tiles having size 30cm. x 45cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/colour cement slurry cleaning curing etc. complete. ... (Item No. 33.26, Second Floor)
437.5
-
-
... More
Providing and laying ceramic tiles having size 30cm. x 45cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/colour cement slurry cleaning curing etc. complete. ... (Item No. 33.26, Third Floor)
437.5
-
-
... More
Providing and laying ceramic tiles having size 30cm. x 45cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/colour cement slurry cleaning curing etc. complete. ... (Item No. 33.26, Fourth Floor)
437.5
-
-
... More
Providing and laying ceramic tiles having size 30cm. x 45cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/colour cement slurry cleaning curing etc. complete. ... (Item No. 33.26, Fifth Floor)
437.5
-
-
... More
Providing and laying ceramic tiles having size 30cm. x 45cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/colour cement slurry cleaning curing etc. complete. ... (Item No. 33.26, Sixth Floor)
265.5
-
-
... More
Providing and fixing MS powder coated door including all material and labour etc complete.
53.2
-
-
... More
Providing and fixing MS powder coated door including all material and labour etc complete.... (First Floor)
77.6
-
-
... More
Providing and fixing MS powder coated door including all material and labour etc complete.... (Second Floor)
77.6
-
-
... More
Providing and fixing MS powder coated door including all material and labour etc complete.... (Third Floor)
77.6
-
-
... More
Providing and fixing MS powder coated door including all material and labour etc complete.... (Fourth Floor)
77.6
-
-
... More
Providing and fixing MS powder coated door including all material and labour etc complete.... (Fifth Floor)
77.6
-
-
... More
Providing and fixing MS powder coated door including all material and labour etc complete.... (Sixth Floor)
77.2
-
-
... More
Providing and fixing MS powder coated door including all material and labour etc complete.... (Seventh Floor)
21.6
-
-
... More
Providing cement based water proofing treatment to terraces(Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/-including ponding test etc. complete. (Item No. 31.04, Seventh Floor)
1083
-
-
... More
Providing and applying a base coat comprising of 1KilogramPolydee-MC and 1Kilogramfresh cement after wetting the surface followed by drying the surface for 2 days, apply primer coat of TP-40 and after drying, applying Polydee-11 two component(mixing ratio 2 A : 1 B)) Antibacterial food grade coating inside drinking water tank in two coats with time interval of minimum 8 hrs. covering 7 years guarantee on Court Fee Stamp Paper of Rs. 100/-etc. complete. (Item No. 31.11, Seventh Floor)
370.1
-
-
... More
Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc. (Item No. 46.09)
68.4
-
-
... More
Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc. ... (Item No. 46.09, First Floor)
68.4
-
-
... More
Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc. ... (Item No. 46.09, Second Floor)
68.4
-
-
... More
Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete. (Item No. 46.13)
50
-
-
... More
Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete. ... (Item No. 46.13, First Floor)
50
-
-
... More
Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete. ... (Item No. 46.13, Second Floor)
50
-
-
... More
Transportation of material obtained from excavation including soil, rubble, bricks, RCC concrete, kerb stones, steel railing, iron pipes, channels, etc. Obtained from dismentaling, loading in truck of minimum 5 cum capacity or designed capacity and transporting within the municipal limits or any designated place of corporation as directed by engineer incharge unloading, stacking or spreading of material, etc complete. Drainage DSR 2022-23, Item No.19141
461.9
-
-
... More
Providing & fixing Pelmet(Plywood) with all fittings, etc complete
231.7
-
-
... More
Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
315
-
-
... More
Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
489
-
-
... More
Supplying, erecting & marking DP MCB 40A to 63A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB
5
-
-
... More
Supplying, erecting & marking TPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
11
-
-
... More
Supplying, erecting & marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
3
-
-
... More
Supplying & erecting triple pole and neutral distribution board (TPNDB),SPMCB of 8 ways / phase (24 poles), with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) asper specification no. SW-SWR/MCBDB
11
-
-
... More
Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 12 ways /36 poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB
3
-
-
... More
Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB
114
-
-
... More
Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB
3
-
-
... More
Supplying and erecting blanking plate of suitable size on MCBDB.
20
-
-
... More
Supplying, erecting & commissioning 2 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB
127
-
-
... More
Supplying, erecting & commissioning 2 pole RCCB40A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB
8
-
-
... More
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 95 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
90
-
-
... More
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 35 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
5
-
-
... More
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3½ core 25 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
5
-
-
... More
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
20
-
-
... More
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
460
-
-
... More
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
30
-
-
... More
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
380
-
-
... More
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
30
-
-
... More
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
10
-
-
... More
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
10
-
-
... More
Supplying and erecting PVC box trunking of size 50x50 mm. with accessories on wall/ceiling as per specification No: WG-MA/BOX. (Outside Room in passage)
598
-
-
... More
Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.
1925
-
-
... More
Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.
3390
-
-
... More
Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW
7100
-
-
... More
Supplying and erecting mains with 1x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW (NOTE 3)
7100
-
-
... More
Supplying and erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places.as per specification No: WG-MA/BW
2275
-
-
... More
Supplying and erecting mains with 1x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places.as per specification No: WG-MA/BW (NOTE 3)
2275
-
-
... More
Supplying and erecting mains with 3x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW
90
-
-
... More
Supplying and erecting mains with 1x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW
90
-
-
... More
Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.
44
-
-
... More
Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete.
345
-
-
... More
Supplying and erecting modular type switch 16 / 20 A with indicator, duly erected on provided plate and box with wiring connections complete
20
-
-
... More
Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete
73
-
-
... More
Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.
345
-
-
... More
Supplying and erecting modular type blanking plate one module, duly erected on provided plate & box.
20
-
-
... More
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
256
-
-
... More
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the
background.
364
-
-
... More
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 4 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the
background.
10
-
-
... More
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the
background.
10
-
-
... More
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 8 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match thebackground
10
-
-
... More
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
2
-
-
... More
Point wiring for light/bell concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WGPW/CW
1851
-
-
... More
Point wiring for ceiling fan concealed type in min 20 mm HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification no. WG-PW/CW
125
-
-
... More
Secondary point wiring for additional light/ bell point, concealed type in min 20 mm FRLS grade PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires with required accessories as per specification No: WG-PW/CW
397
-
-
... More
Wiring for plug on board with Switch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification No: WG-PW/CW
720
-
-
... More
Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 770 Lumens, min. efficacy of 110 lumen/W, CRI80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.
6
-
-
... More
Wardrobe Light DESIGN: 3/5Watt Made of silver plastic is discreet and unobtrusive,INSTALLATION: The lamp can be attached with the included mounting material either with screws and dowels or with adhesive strips.
APPLICATION: The wall lamp can be used in a variety of ways, e.g. in the wardrobe.
339
-
-
... More
Supplying and erecting ding dong / electronic musical type call bell with heavy duty coil suitable to operate on 230V A.C. supply erected on polished double wooden block/sunmica block of suitable size.(132 ROOMS x 2)
113
-
-
... More
Decorative Wall Light in Toilets This exclusive wall lamp looks very elegant thanks to the chrome elements used in a targeted manner.
MATERIAL/COLOUR: The light is particularly effective thanks to the opal-white glass, which is surrounded by a chrome ring.
TYPE OF PROTECTION: The light is protected by protection class IP44 and is therefore perfect for use in the bathroom.
LAMPS: A 20 watt LED lamp with a strength of 1600 lumens, 4000-6000k color is permanently installed in the lamp.
226
-
-
... More
Decorative Wall Light In Rooms DESIGN: This wall light is a real eye-catcher thanks to its oval shape and the black and gold coloring.
MATERIAL: The lamp is made entirely of metal and is black on the outside and gold leaf on the inside.
LIGHTING: The upward and downward lighting creates a beautiful lighting effect on the chosen wall.
BULBS INCLUDED: A 18 watt LED bulb with 230 lumens and warm white light color (3600 Kelvin) is permanently installed in the light.
460
-
-
... More
Reading Light A modern and discreet interior light for your walls. The simple black design convinces with its functionality and the Scandinavian look.
MATERIAL/COLOUR: The small interior light is completely matt black and consists of plastic and metal. The neck can be moved flexibly and adapted to your wishes.
APPLICATION LOCATION: Whether as a reading light next to the bed, as a night light, as a work light at the desk or as atmospheric lighting in the living room, you are well equipped with this lamp.: Whether as a reading light next to the bed, as a night light or as atmospheric lighting in the living room, with this Lamp you are well equipped.
LAMPS: The existing GU10 allows lamps with a maximum power of 25 watts for the wall light. Luminous intensity and light color can be freely selected by you.
226
-
-
... More
Supplying and erecting LED square / circular Max. 14 W down lighter / Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1500 Lumens, min. efficacy of 110 lumen/W, CRI80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD10%, p.f. 0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED.
646
-
-
... More
Supplying and erecting LED Strip light 5m Length Max. 60 W/12W/Mtr IP20 class having minimum lumens output of 800 Lumens/m, min. efficacy of 90 lumen/W, CRI80, CCT upto 5000K, Beam Angle of 110 deg., THD10%, p.f.0.95, operating range of 230-270V, Life class of 30,000 Hrs. at L70B50, including driver/SMPS 120W, Housing material - Aluminium LLS-12WFT 50mmx70mm Led Light Fixtures ( 12 foot ) EMPTY with suspension Kit, HOUSING with 1 year warranty
10
-
-
... More
Supplying & erecting inverter LED batten 20W tube light fitting with polycarbonate housing, heat sink, integrated HF electronic driver, Min. 2600 mAh Lithium ion Battery with charging time of 8-10 Hours and backup time of Min. 3 hrs. with minimum 25% of initial Watts having luminous efficacy of 100 lumen/watt, CRI80, CCT of 6500K and THD=20% having useful life of
minimum 25000 hrs. with overheating protection with 2 years warranty.
10
-
-
... More
Supplying and erecting integrated LED flood light fitting Max. 50W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 5000 Lumens, min. efficacy of 100 lumen/W, CRI70, CCT upto 6500K, THD10%, p.f. 0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs at L70B50 including driver with U shaped bracket with minimum 2 Years warranty as per specification No. FG-ODF/FL.
2
-
-
... More
Supplying and erecting modular type 32A, DP key tag switch with key tag on provided plate and box with wiring connections complete.
113
-
-
... More
Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to the R.C.C. bars upto 50 mm length each side and pierced through a 16 S.W.G. thick aluminium/M.S. Bowl 100 mm dia. or equivalent square size and having depth upto 75 mm complete erected with duly painted by one coat of red oxide paint and two coats of paint erected in position and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level of the slab.
125
-
-
... More
Supplying and erecting ‘B’ class G.I .pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire.
5
-
-
... More
Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, max. energy consumption of 28W having service ratio (CMM/W) of Min. 8 , PF0.9, THD
125
-
-
... More
Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‘E’ class insulation.
119
-
-
... More
Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 200 mm width & 75 mm height complete with necessary coupler plates & hardware.
85
-
-
... More
Supplying, erecting, testing & commissioning of 3 kVA capacity on line pure sine wave,PWM,IGBT based UPS with 0.8 to unity output pf ,single phase input & 1 phase output complete with all protections as per specification no. AP-UPS (Without batteries)
1
-
-
... More
Supplying and erecting 12 V/150Ah Tubular battery with battery terminal wire, duly charged complete with 36 months warranty complete. 30 MINUTES BACKUP
2
-
-
... More
Supplying & laying (including excavation) reinforced cement concrete pipe of NP-2 class of 250 mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.
265
-
-
... More
ProvidingandconstructingBrickMasonryInspectionChamber60cmx45cmx90cmincluding1:4:8cementconcretefoundation1:2:4cementconcretechannelshalfroundG.S.W.pipes,BrickMasonry,plasteringfrominsideandwithframefixedincement concrete with R.C.C. Cover medium duty 140Kilogramwith frame etc complete.
24
-
-
... More
Supplying,installation,testing & commissioning of
Infrared,Surface Mounted PIR occupancy Sensor
with day light dimming in the false ceiling / surface,
compatible for 30/ 15Watt LED lights
61
-
-
... More
Supplying and erecting LED square / circular Max. 14 W down lighter / Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1500 Lumens, min. efficacy of 110 lumen/W, CRI80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD10%, p.f. 0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED. Min. 2600 mAh Lithium ion Battery with charging time of 8-10 Hours and backup time of Min. 3 hrs. (6 per floor * 6 Floor + 30 in Gr + Gym)
66
-
-
... More
Supplying and erecting LED Strip light 5m Length Max. 60 W/12W/Mtr IP20 class having minimum lumens output of 800 Lumens/m, min. efficacy of 90 lumen/W, CRI80, CCT upto 5000K, Beam Angle of 110 deg., THD10%, p.f.0.95, operating range of 230-270V, Life class of 30,000 Hrs. at L70B50, including driver/SMPS 120W, Housing material - Aluminium LLS-12WFT 50mmx70mm Led Light Fixtures ( 12 foot ) EMPTY with suspension Kit, HOUSING with 1 year warranty Min. 2600 mAh Lithium ion Battery with charging time of 8-10 Hours and backup time of Min. 3 hrs.
2
-
-
... More
Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame.
2
-
-
... More
Supplying, installation and testing of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete, and recording the results Specification no. EA-MOBI
8
-
-
... More
Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation complete.
7
-
-
... More
Supplying and erecting annealed bare copper wire of high purity of required sizes used for earthing on wall with necessary copper clamps fixed on wall/cable/conduit with screws complete.
80
-
-
... More
Main Panel Residential Block 01
Duty -Duty: Indoor Type (IP 42)
Incomer-1 Nos of 800A FP LSIG Microprocesor based MCCB with aux contacts, ON, OFF, TRIP Indicators, Multifunction Dual Source Meter.
Busbar - 800A TPN Al Busbar Outgoings - 1 Nos of 500A FP MCCB, 1 Nos 400A FP MCCB, 1 Nos 125A FP MCCB, 11 Nos 63A FP MCB, 1 Nos 40A FP MCB, 4 Nos 32A FP MCB,
3 Nos 25A FP MCB, 2 Nos 10A SP MCB, SPD Class I+II
1
-
-
... More
Main Panel Residential Block 02
Incomer-1 Nos of 400A FP LSIG Microprocesor based MCCB with aux contacts, ON, OFF, TRIP Indicators, Multifunction Dual Source Meter.
Busbar - 400A TPN Al Busbar Outgoings - 1 Nos 125A FP MCCB, 10 Nos 63A FP MCB, 1 Nos 40A FP MCB, 2 Nos 32A FP MCB,
1 Nos 25A FP MCB, 1 Nos 10A SP MCB, SPD Class I+II
1
-
-
... More
Floor Panel Residential Block
Incomer-1 Nos of 630A FP LSIG Microprocesor based MCCB with aux contacts, ON, OFF, TRIP Indicators, Multifunction Dual Source Meter.
Busbar - 100A TPN Al Busbar Outgoings - 13 NOS 25A DP MCB, 2 NOS 32 A DP MCB
11
-
-
... More
SITC of Electric Traction Passenger Lift with · Rated capacity :- 16 Passenger/1088Kg · Floors :- G+7 floor (8 Stops/8 Landings) · Travel :- 30 mtrs · Location of Lift Machine:- MR/MRL · Rated speed :- 1.0mps VS
· Car/Landing door clear opening of 1000 mm wide x 2000 mm high
· Clear Car size of 1600 mm wide x 1600 mm deep x 2250mm high
· Lift shaft available having clear size of 2500mm wide x 2200mm deep, pit depth-1500mm, Overhead height -4500mm
· Doors type :- COPO/TOPO Doors with frame made from SS 304 grade solid(non-cladded) sheet of 1.5mm thick in hairline finish for car and all landing doors with SS door architraves/frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory).
· Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. The lift car interior design shall be done as per the directions of engineer in charge..
· COP with SS face plate having metallic push buttons with Braille code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with / without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor.
• Clear Car size of 1300 mm wide x 1100 .mm deep x2000 .mm high · LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings.
· Lift controller of simplex full collective based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port. The controller shall have necessary protections such as overcurrent, overvoltage, over speed, overheat for all devices including lift motor and travel direction protection, protection for phase loss at input or output etc. ,various operation modes such as maintenance, change direction by attendant, full load bypass, VIP call operation, self levelling operation, call cancel facility, auto return to home landing, fireman evacuation operation, earthquake operation, door open/close operation from COP etc. The system can record information for minimum 30 latest faults, with real-time clock management and handheld keypad with LCD screen for view and setting of parameters, The control panel duly wired with proper size & strength, copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class.
· ARD complete with necessary SMF VRLA batteries.
· Fireman controller having fireman switch at fire Landing. · CCTV surveillance system comprises of 2nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for min. 90 days with min. 20" FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge.
· Lift Machine of Gearless PMSM of suitable kW with duty cycle of minimum 120 starts/hr (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory), with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength.
· Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work.
· Minor civil work such as alteration work if any necessary for erection of landing door frames and it's accessories e.g. sill, header, hole pass etc complete with plaster finish, civil work for erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails, providing and fixing steel girders/RCC work having adequate strength for mounting and hoisting lift machine etc. complete as per specification no. LFT.
· General: - Job includes entire procedure of obtaining all necessary erection permissions & "License to Work the Lift" from Electrical Inspector(Lifts) with submission to the Engineer In Charge. · The above rate includes Fully Comprehensive AMC for one year from the date of commissioning.
A1 -For Lift having 900mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade solid(non-cladded) landing door [Two panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows-indicators, extension of guide rails, shaft wiring with trunking, travelling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete.
1
-
-
... More
SITC of Electric Traction Passenger Lift with · Rated capacity :- 13 Passenger884Kg · Floors :- G+7 floor (8 Stops/8 Landings) · Travel :- 30 mtrs · Location of Lift Machine:- MR/MRL · Rated speed :- 1.0mps VS
· Car/Landing door clear opening of 900 mm wide x 2000 mm high
· Clear Car size of 1300 mm wide x 1350 mm deep x 2250mm high
· Lift shaft available having clear size of 2600mm wide x 1900mm deep, pit depth-1500mm, Overhead height -4500mm
· Doors type :- COPO/TOPO Doors with frame made from SS 304 grade solid(non-cladded) sheet of 1.5mm thick in hairline finish for car and all landing doors with SS door architraves/frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory).
· Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. The lift car interior design shall be done as per the directions of engineer in charge..
· COP with SS face plate having metallic push buttons with Braille code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with / without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor.
• Clear Car size of 1300 mm wide x 1100 .mm deep x2000 .mm high · LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings.
· Lift controller of simplex full collective based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port. The controller shall have necessary protections such as overcurrent, overvoltage, over speed, overheat for all devices including lift motor and travel direction protection, protection for phase loss at input or output etc. ,various operation modes such as maintenance, change direction by attendant, full load bypass, VIP call operation, self levelling operation, call cancel facility, auto return to home landing, fireman evacuation operation, earthquake operation, door open/close operation from COP etc. The system can record information for minimum 30 latest faults, with real-time clock management and handheld keypad with LCD screen for view and setting of parameters, The control panel duly wired with proper size & strength, copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class.
· ARD complete with necessary SMF VRLA batteries.
· Fireman controller having fireman switch at fire Landing. · CCTV surveillance system comprises of 2nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for min. 90 days with min. 20" FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge.
· Lift Machine of Gearless PMSM of suitable kW with duty cycle of minimum 120 starts/hr (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory), with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength.
· Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work.
· Minor civil work such as alteration work if any necessary for erection of landing door frames and it's accessories e.g. sill, header, hole pass etc complete with plaster finish, civil work for erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails, providing and fixing steel girders/RCC work having adequate strength for mounting and hoisting lift machine etc. complete as per specification no. LFT.
· General: - Job includes entire procedure of obtaining all necessary erection permissions & "License to Work the Lift" from Electrical Inspector(Lifts) with submission to the Engineer In Charge. · The above rate includes Fully Comprehensive AMC for one year from the date of commissioning.
A1 -For Lift having 900mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade solid(non-cladded) landing door [Two panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows-indicators, extension of guide rails, shaft wiring with trunking, travelling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete.
2
-
-
... More
ITC of Duplex Lift control system for two nos. microprocessor/PLC based simplex lift controllers along with necessary software with programming and hardware e.g. logic board, necessary communication/control/data cabling laying in rigid PVC conduits/trunking etc. complete.
1
-
-
... More
Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW
140
-
-
... More
Supplying and erecting mains with 1x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW
140
-
-
... More
Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.
24
-
-
... More
Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete.
24
-
-
... More
Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.
24
-
-
... More
Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.
24
-
-
... More
Supplying and erecting PVC Surface modular switch box with double mounting plate for 6 module duly erected.
24
-
-
... More
Supplying and erecting modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.
3
-
-
... More
Wiring for plug on board with Switch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification No: WG-PW/CW
3
-
-
... More
Point wiring for ceiling fan concealed type in min 20 mm HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification no. WG-PW/CW
3
-
-
... More
Point wiring for light/bell concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WGPW/CW
6
-
-
... More
Supplying and erecting bulk head LED fitting max. 10W with high transitivity diffuser with system lumens output of min. 1100 lumens, min. efficacy of 110 lumen/W, CRI80, CCT upto 6500K, Beam Angle of 120 deg., THD10%, p.f. 0.95, operating range of 140-260V, in built surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, IP66, IK09 rated on provided PVC Block / wooden board with 3 years warranty.
24
-
-
... More
Supplying and erecting CRCA powder coated corridor/passage light LED fitting (4 feet) Max. 17W with high transitivity diffuser with system lumens output of Min. 2000 lumens , min. efficacy of 120 lumen/W, CRI80, CCT upto 6500K, Beam Angle of 120 deg., Ripple5%, THD10%, p.f. 0.95, operating range of 120-270V, surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty.
6
-
-
... More
Providing recess in brick wall suitable for erection of exhaust fan up to 450mm. sweep complete with grouting of nut, bolts, plastering and colour washing to match the colour of the wall for the wall thickness of 225 mm.
3
-
-
... More
Supplying & erecting 22 SWG G.I sheet metal cawl sector shaped with 25 x 25 x 3 (mm) angle iron frame, metal mesh to avoid birds entry with necessary material, suitable for exhaust fan of 300 mm as per specification no FG-FAS/MSC
3
-
-
... More
Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‘E’ class insulation.
3
-
-
... More
Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, max. energy consumption of 28W having service ratio (CMM/W) of Min. 8 , PF0.9, THD10% with IR remote control/compatible speed regulator, Temperature Rise of Max. 40 deg. C, having external mounted control PCB completely erected in position as per specification no. FG-FN/CF
5
-
-
... More
Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
9
-
-
... More
Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
9
-
-
... More
Supplying, erecting & commissioning 2 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB
3
-
-
... More
Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB
3
-
-
... More
Supplying, erecting & commissioning 4 pole RCCB 63A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB
3
-
-
... More
Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame.
3
-
-
... More
Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.
100
-
-
... More
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
150
-
-
... More
Supplying & erecting G.I. pipe ‘A’ class 40 mm dia. erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE
9
-
-
... More
Supplying, installation and testing of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete, and recording the results Specification no. EA-MOBI
6
-
-
... More
Supplying and erecting annealed bare copper wire of high purity of required sizes used for earthing on wall with necessary copper clamps fixed on wall/cable/conduit with screws complete.
60
-
-
... More
Supplying & erecting HMS PVC conduit 25mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification no. WG-MA/CC. (Conduit without bathroom 114 + Conduit for TV 304 + for CCTV 200 )
618
-
-
... More
Supplying and laying HMS PVC conduit FRLS grade 32mm dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC. (Inside Rooms for CAT 6 & Tel)
300
-
-
... More
Supplying and erecting PVC box trunking of size 50x50 mm. with
accessories on wall/ceiling as per specification No: WG-MA/BOX. (Outside Room in passage)
598
-
-
... More
Supplying and erecting PVC box trunking of size 100x50 mm. with accessories on wall/ceiling as per specification No: WG-MA/BOX .
10
-
-
... More
Supplying and erecting modular type T.V. socket single outlet, duly erected on provided plate and box with wiring connections complete.
114
-
-
... More
Supplying and erecting modular type telephone socket one gang with safety shutter, duly erected on provided plate and box with wiring connections
complete.
124
-
-
... More
Supplying and erecting modular type blanking plate one module, duly erected on provided plate & box.
124
-
-
... More
Supplying, erecting & terminating 2 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, nylon rip cord & grey colour sheathed with FR PVC, confirming to ITD specification S/WS 113C laid in provided PVC casing-n-capping/conduit as per specification no. WG-TW
1080
-
-
... More
Supplying, erecting & terminating 100 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, nylon rip cord & grey colour sheathed with FR PVC, confirming to ITD specification S/WS 113C laid in provided PVC casing-n-capping/conduit as per specification no. WG-TW
50
-
-
... More
Supplying, erecting & terminating 20 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, nylon rip cord & grey colour sheathed with FR PVC, confirming to ITD specification S/WS 113C laid in provided PVC casing-n-capping/conduit as per specification no. WG-TW
192
-
-
... More
Supplying & erecting 0.5 mm dia, copper jumper wire as per specification No. WG-TW
7
-
-
... More
Supplying, erecting & terminating co-axial copper cable low voltage grade tri-shielded RG-11 as per specification no. WG-TW
150
-
-
... More
Supplying, erecting & commissioning MDF Box 20x20 pairs made from min. 1.5mm thick MS sheet as per specification no. WG-TA
12
-
-
... More
Supplying, erecting & commissioning MDF Box 150x150 pairs made from min. 1.5mm thick MS sheet as per specification no. WG-TA
2
-
-
... More
Supplying and installing cat-6 cable suitable for networking as per specification no. WG-COC/NC
3594
-
-
... More
upplying, fixing, and configuring 24 ports + (4 SFP+) ports Managed Layer 2 switch of and web View/CLI, 6KV surge protection on ethernet port and console port for management as per specification complete.
11
-
-
... More
8 Port Managed Layer 2 Switch
1
-
-
... More
24 Port Managed Layer 3 Switch
1
-
-
... More
Supplying, fixing, and configuring broadband ADSL router with all accessories, on provided rack as per specification No. WG-NWC/ADSL
1
-
-
... More
Supplying and fixing tool-less IO (ethernet) flush/surface type in provided modular box as per specification no. WG-NAS/IO
135
-
-
... More
Supplying and installing armoured single mode optical fibre cable with 6 fiber, core dia 50/125μm (OS1/OS2) 10/40 GBPS speed in provided underground HDPE pipe complete.
280
-
-
... More
Supplying and plugging 3 m fibre patch cord LC-SC MM (50) OM3 LSZH
duplex complete as per specification no. WG-COC/FPC
2
-
-
... More
Supplying, fixing, and configuring 10G Base -SR (SFP+) simplex MM
transceiver erected in provided rack complete.
2
-
-
... More
Supplying and fixing 12 ports light guide unloaded interconnect unit,rack mounted type, with adapter panel for termination of optical fibre cables in provided U rack complete as per specification no. WG-NAS/ LIU
2
-
-
... More
Supplying and fixing SC/LC type multimode pigtails (OM3) for LIU to
terminate OFC in LIU as per specification No. WG-NAS/LIU2
12
-
-
... More
Supply Installation, testing & commissining of 2MP Analog HD Dome type Camera, 2.8 mm Fixed lens, IR-20mtr with power supply adaptor & required accessories.
13
-
-
... More
Supplying & erecting co-axial copper cable low voltage grade tri-shielded RG-6 as per specification No. WG-TW
1080
-
-
... More
Supplying, erecting & terminating 3 m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19pin HDMI connectors complete.
1
-
-
... More
Supply Installation, testing & commissining of 32 Channel, 1080P HD DVR (Digital Video Recorder), Auto Adaptive HDCVI/AHD/TVI/CVBS/IP signals, Max 128Mbps Incoming Bandwidth, H.264+ / H.264 dual-stream video compression, HDMI / VGA Simultaneous Video Output, Support 2 SATA HDD up to 16TB, 2 USB Ports, with required accessories.
1
-
-
... More
Supplying & erecting of BNC Connector with required accessories.
26
-
-
... More
Supply Installation, testing & commissining of 12VDC/5A SMPS Power supply for Camera
2
-
-
... More
Supplying, erecting, testing and commissioning of multistrand annealed bare copper conductor, PVC insulated 2C x 1.5 sqmm cable in provided trunking/conduit etc.
195
-
-
... More
Supplying & erecting 8 TB internal Surveillance HDD suitable for SATA Port of DVR/NVR, interface transfer rate 6 GB/S, maximum sustained transfer rate 210 MB/Sec to 213 MB/S. Drive bay supported 08+, Cameras supported up to 64, Cache (MB) 256, Load/Unload Cycle -3000000, Work Load Rating per Year 180TB, MTBF 1000000 Hrs. HTTPS. RoHS, UL, CE certified, duly erected in position in provided NVR as per specification no. CCTV-HDD
2
-
-
... More
Supplying & erecting 32" professional LED Monitor with 1920*1080 (Full HD) Display, suitable for 16 channel NVR and following features
Brightness: minimum 250 Cd/m2
Contrast Ratio: minimum 1000:1
Viewing angle: 178/178 deg.
Response time: maximum 8 ms
Inputs: HDMI, VGA, BNC, USB, Audio In, Built-in speakers maximum 2 W, Suitable to operate on 100-240 V 50 Hz AC supply and 24/7 Duty Cycle duly erected on wall or table top with standard accessories like wall mount stand and wiring connections etc. complete as per specifications no. CCTV-MON
1
-
-
... More
Supplying, erecting testing and commissioning manual call point (Pill box) with break glass, push button (resettable type) in metal enclosure complete as per specification no. FF-FAAS/MCP
21
-
-
... More
Supplying, erecting, testing and commissioning hooters having high (100dB @
1m) and low (94dB @ 1m) volume setting, group addressing facility allowing
multiple sounders to be activated with CRCA enclosure complete as per
specification no. FF-FAAS/HTR
21
-
-
... More
Supplying, installing, testing and commissioning FR, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU
820
-
-
... More
Supplying, installing, testing and commissioning 8 Zone, local signal conventional control panel (LCP) with standard accessories complete as per specification no. FF-FAAS/LCP
1
-
-
... More
Supplying Installing, testing and commissioning of PA Gooseneck Microphone with Base and frequency response 50-16000Hz, 150Ω to 200Ω impedence, sensitivity 3 to 5.5mV/PA with minimum length(excluding pedestal) of 585mm(23") long, felxible stem gooseneck condenser microphone & Heavy Duty Metal Base having on/off switch, LED indication and Suitable for 48V phantom supply as per specification no. PA-GM
1
-
-
... More
Supplying, erecting, testing & commissioning Mixer Amplifier 500W RMS Power with Built-in Digital Player with remote and having 7 Mic & 3 Aux Inputs with Box Speaker/Driver Unit selector switch to each zone , stereo/mono switch, frequency response 50-15000Hz, output regulation 2dB, serprate control for USB level. The unit shall have Preamplifier and Line Output for connecting to a Booster Amplifier and for recording the programme with Resettable circuit breaker for protection against overload and short circuit. The unit shall have speaker output range of 2Ω, 4Ω/(Low Impedence) and 70V & 100V/(High Impedence) & It can instant transfer to DC power(36V) if AC power fails. Signal to noise ratio between 60dB to 80dB. Complete as per specification no. PA-MA
1
-
-
... More
Supplying,installing, testing & commissioning 2-Way flush mount Ceiling Speakers with input power 20W RMS power, with power taps on 20/10/5W, 100V & 70V line, frequency response 90-18000Hz, stylish metal mesh grill and plastic frame, operates on 100V line for excellent reproduction of both speech and music, wide frequency response and adjustable tweeter complete as per specification no. PA-FMCS
29
-
-
... More
Supplying, erecting, testing and commissioning of multistrand annealed bare copper conductor, transparent PVC insulated 2C x 1.5 sqmm speaker wire in provided trunking/conduit etc.complete as per specification no. PA-TSPWR
660
-
-
... More
Residential section : Supplying, installing, testing and commissioning 5 Star split type variable speed Inverter technology room Air conditioning unit 1.5 TR capacity having minimum ISEER value of 5.4, suitable to operate on 250V, 50 cycles, A.C. supply having 1 no of air handling unit Hi wall (throw shall be upto 16m with wide coverage area) / floor mounting type complete with refrigerant R410A / R32 and copper condenser and evaporators at position with smart control facility using Wifi on Mobile/Tablet/PC.
Daikin FTKF50UV
121
-
-
... More
Supply and Installation of powder coated bracket stand (wall mounted / floor mounted / ceiling hung type) suitable for 1.5 TR split ac in appropriate manner with all required accessories complete as directed by Engineer in charge. includes new Copper piping with nitrile rubber Insulation, Drain piping in hard PVC with all fittings, supports and clamp, up to 3 mtr. lengths and extra copper piping and PVC drain pipe as per below mentioned items with all required accessories and drilling in walls complete. AC unit shall also be included copper flexible wire of 1.5 sqmm 4 core between IDU and ODU.
121
-
-
... More
Supply and Installation of copper piping (1/2"for suction and 1/4"discharge) of appropriate size in appropriate manner suitable for machines provided with all required accessories complete as directed by Engineer in charge.
254
-
-
... More
Supply and Installation hard PVC drain pipe of appropriate size in appropriate manner suitable for machines provided with all required accessories complete as directed by Engineer in charge. Pipe Dia.25mm with 6mm nitril rubberclass O insulation.
254
-
-
... More
Supplying, installing, testing and commissioning of ONLY Ductable unit of capacity 11.0TR for the available at site fix speed "CARRIER" make ODU ( Model No. 38LH-132GSC ) with washable Pre filter, R410A gas and drier, expansion valve, etc. By making ODU good condition if required by contractor. (ODU's are available at site for inspection before quote submission)
2
-
-
... More
Supplying, installing, testing and commissioning of Cu piping (1 1/8"for suction and 5/8"discharge) for above mentioned Carrier make IDU and ODU of appropriate size with insulation and support system.
12
-
-
... More
Supplying, installing, testing and commissioning of AC Ducting made out of 24G G.S.S. Sheets of having coating of 180GSM, factory fabricated only. Installed with necessary supporting system.
72
-
-
... More
Supplying, installing, testing and commissioning of Class 'O' Nitril rubber insualtion of 19mm thickness for ducting.
72
-
-
... More
Supplying, installing, testing and commissioning of acoustic insulation for air ducts with 25mm thick, 48 kg/cu.m fiber glass faced with RP tissue and covered with 26 SWG perforated aluminium sheets complete.
40
-
-
... More
Supplying, installing, testing and commissioning of Aluminium powder coated grilles of height 200mm, with 0 deg. angle all 4 side flanges.
32
-
-
... More
Supplying, installing, testing and commissioning of Flexible canvass connection of 11.0 TR IDU.
2
-
-
... More
Supply and Installation of GI VCD for Fresh air. Size - 200x200mm.
2
-
-
... More
Supply and Installation of ODU stand ( floor mounted type) suitable for 11.0 TR ductable ODU made of MS Channel 50x50x6mm HDGI coated in appropriate manner with all required accessories, (ODU size - 12x600mm) (1stand = 22Kg )
2
-
-
... More
From second year to fifth year (4 years)
121
-
-
... More
From Sixth year to Tenth year (5 years)
121
-
-
... More
Supplying, installation, testing and commissioning of booster fire pump [BP] suitable for water discharge of 900 LPM at 35 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 7.5 kW or of suitable kW capacity for manual/automatic operation and consisting of following :(a) Horizontal/vertical type, single/multi stage, centrifugal casing pump of cast iron body & bronze/CI impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520.(b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation on with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.(c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.(d)Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/BP
1
-
-
... More
for 5.5/ 7.5 kW centrifugal type booster pump 1no (1working), add Rs…....
1
-
-
... More
Supplying & erecting D.O.L Starter suitable for 415 V, 3 phase 50 cycles with no volt coil and overload element with necessary materials and connected to supply up to 7.5 H.P.
1
-
-
... More
Supplying and erecting G.I. pipe ‘C’ class ERW 100 mm dia with necessary fittings complete as per specification no. FF-PP
135
-
-
... More
Supplying and erecting 100 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS
1
-
-
... More
Supplying and erecting 100 mm dia. cast iron double flange sluice valve complete with PN16 pressure rating, as per specification no. FF-VL/SV
1
-
-
... More
Supplying and erecting 100 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV
18
-
-
... More
Supplying and erecting 100 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV
1
-
-
... More
Supplying and erecting 25 mm dia gun metal gate valve complete with PN16 pressure rating, as per specification no. FF-VL/GV
18
-
-
... More
Supplying and erecting stainless steel single outlet hydrant valve fitted with necessary accessories complete as per specification no. FF-VL/HV
16
-
-
... More
Supplying and installing wall mounting swinging hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (Polyhose) along with necessary accessories complete as per specification no. FF-FFA/HV
16
-
-
... More
Supplying and erecting 63mm dia, reinforced rubber lined (R.R.L.) hose pipe, 15m in length, fitted with necessary accessories complete as per specification no. FF-FFA/RRL
32
-
-
... More
Supplying and erecting stainless steel branch pipe 63 mm dia fitted with 20 mm dia detachable hexagonal nozzle complete as per specifications no. FF-FFA/NZ
16
-
-
... More
Supplying and erecting fire brigade header ( Siamese connection )of 150 mm dia, for supplying water in fire tank complete as per specification no. FF-FA/FMC
1
-
-
... More
Supplying and erecting 100 mm dia. pressure gauge , 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, erected with provided G.I. pipe, elbow etc. complete as per specification no. FF-FFA/PG
1
-
-
... More
Supplying and erecting 12/15 mm dia pressure switch with provided isolation valve, G.I. nipple, elbow, etc complete as per specification no. FF-FFA/PS
2
-
-
... More
Supplying and erecting M.S./CRCA cabinet for housing Fire Brigade / SIEMESE connections (size 1250 x 400 x 300 mm.) made from 16 SWG sheet and angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8" x 6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour( Code 538 of IS 5)
16
-
-
... More
Supplying, erecting, testing and commissioning vane type water flow detector 100 mm dia. with 1) Visual switch activation 2) Rugged switch assembly 3) Heavy duty aluminium pipe saddles 4)Durable metal enclosure 5) Steel U bolts for secure mounting 6) Two SPDT ( Single pole double track ) synchronised switches 7) serviceable without draining pipes.
1
-
-
... More
Supplying and erecting fire resistant mortar (20 kg) with fire resistance class S90 as per National Electrical Code (NEC) SP30-2011 suitable to seal the openings of all kinds of cables, pipes and cable support system in steel, aluminium and plastic profiles ( except hollow core conductors). The residual openings shall be closed with filler, as per specification no FF-FRM.
1
-
-
... More
Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete.
28
-
-
... More
Supplying, installing, testing, and commissioning of portable fire extinguishers of ABC dry powder stored pressure type fire extinguishers of 6 Kgs.capacity Complete with standard discharge valve with tube, CI bracket for wall mounting etc. complete as per confirming to IS : 15683 complete all the work up to the satisfaction of the Engineer in charge.
34
-
-
... More
Providing and fixing in position statutory Signage's made out of 3mm thick opaque PVC foam board, machine cut, non reflective, auto glow (type & Make), with silicon adhesive for safe evacuation of occupants in case of emergency. Sign indicators should be provided at prominent places as per Fire Provisional NOC (As per - IS-9457, IS-12349, IS-12407). complete all the work up to the satisfaction of the Engineer in charge.
40
-
-
... More
Providing, laying, testing & commissioning of 100mm dia resilient rubber neoprene lined single arch Vibration eliminators (Expansion bellows) suitable for Design Pressure 16 kg/sq cm and test pressure 24 kg/sq cm. complete all the work up to the satisfaction of the Engineer in charge.
1
-
-
... More
Providing Floor mounting stand for keeping 4 Nos. of FIRE buckets 1500mm in length, 900mm in height frame made out of 30x30x4 mm angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of silver paint complete.
2
-
-
... More
Providing and fixing white european type wall-hung, Size 380mm x 650mm x 730mm with wall hung coupled flush tank with float operation auto filling, wall plate/push buttons from inside to opeate the flush tank, rigid flush water pipe having flow rate upto 6.0 Litr/Minute of Jaquar or equivalent make including PVC soil pipe, vent pipe upto outside face of wall, 100mm dia PVC plug bend inlet pipe all fittings, MS PC chair backet with SS rack bolts cutting &making good walls, floors etc as directed by Engineer incharge .(Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.)
127
-
-
... More
Providing and fixing White glazed with bottle trap earthenware Wash Hand Basin of 55x40 cm size including cold water piller taps, brackets, rubber plugs and brass chain, angular stop tap, chromium plate bottle trap and necessary pipe connections including UPAC waste pipe and trap upto the outside face of the wall, making good the damaged surface, testing etc. complete.
142
-
-
... More
Providing and fixing white glazed urinal with Pressmatic auto closing valve having flow rate up to 4.0 Litr/Minute of Jaquar/Cera/Hindware /Perryware or equivalent make with P.V.C. waste pipe with fitting arrangement etc.complete as directed by Engineer in charge.( Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.)
9
-
-
... More
Providing and fixing Hand shower (health faucet) with 8mm dia. 1m long flexible tube having wall hook with approved make including necessary sockets/ union nut etc. complete as directed by Engineer in charge.(SSR 21-22)
127
-
-
... More
Providing and fixing stainless steel sink of size 600 x 510 x200 mm incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete.
2
-
-
... More
Providing and fixing C.P. sink cock with raised J" shaped swinging casted spout ofapproved make including necessary sockets/ union nut etc. complete."
2
-
-
... More
Providing and fixing C.P. 2 Way BIB cock with wall flange of approved make including ecessary sockets/ union nut etc. complete as directed by Engineer in charge.
142
-
-
... More
Providing and fixing C.P. BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete as directed by Engineer in charge. ( For wash machine & Utility).
1
-
-
... More
Providing and fixing C.P. Angular stop clock with wall flange of approved make continental ncluding necessary sockets/union nut etc. complete.
140
-
-
... More
Providing and Fixing toilet set for differently Abled persons consist of Floor Mounted white vitreous china water Closet including 6 litre capacity white vitreous china flushing Cistern with raised soft-push button, white vitreous china wash basin of size 46 x 36 cm and one no SS 304 hinged rail 76 cms & three no SS 304of (Grab Bar) 60 cms all including cutting and making good the walls and floors wherever required ,seat cover, cistern & wash basin fittings,nuts, bolts and gasket etc complete as per the direction of Engineer-In-charge.
1
-
-
... More
Providing and fixing divertor with overhead shower, showerarm, spout, handshower with wallbracket having flow rate upto 12liters/minutes of Jaquar/ Cera/ Hindware/ Perryware or equivalent make including all necessary pipes, fittings etc. complete as directedm by Engineer InCharge. (Makeshall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.)
116
-
-
... More
Providing and fixing of TOWEL RACK 600MM LONG WITH LOWER HANGERS STAINLESS STEEL, etc complete.
116
-
-
... More
Providing and fixing of C.P.Soap dish hooker jaquar make continental, etc complete.
116
-
-
... More
Providing and fixing of C.P.Toilet paper holder jaquar make continental, etc complete.
116
-
-
... More
Providing and fixing of coat holder, etc complete.
232
-
-
... More
Providing and fixing of Towel ring square, etc complete.
116
-
-
... More
Providing and fixing of white acrylic 1200x1200 shower tray with bottom outletcustomised for typical and m mirror shower area which shall be non corrosive, anti sleepary, piched towards corner drain point with leakproof joints and leveling, finished along with side wall/tiles as per approved mock up sample by client
116
-
-
... More
Providing and fixing cloth liner retractable with all fittings etc complete.
116
-
-
... More
Providing and fixing sliding glass door (JSE-CHR-OPTSDR1200SX Optima Sliding Door 8mm RT./LFT 1200X2000mm) with all necessary fittings etc complete
114
-
-
... More
Providing, laying and fixing P.V.C. pipe of 40mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trenchfilling etc. complete. Including removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
281.6
-
-
... More
Providing, laying and fixing P.V.C. pipe of 75mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trenchfilling etc. complete. Including removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
621.5
-
-
... More
Providing, laying and fixing P.V.C. pipe of 110mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trenchfilling etc. complete. Including removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
374
-
-
... More
Supply, installation, testing & commissioning of PVC SWR (Grade B) pipe as per IS 13592, of approved make vertically in shaft, necessary cutting to the required length including short pieces, assorted fittings such as plain tee and bend single/ double Y, offsets etc. as per IS 14735, jointing with solvent cement & rubber rings, clamping on wall using PVC pipe clips and giving water-tightness test for the pipes along with making holes in walls/floor grooving and redoing the same and brick support etc. complete as per directions of engineer-in-charge. 110mm dia (Grade B)
1292.5
-
-
... More
Supply, installation, testing & commissioning of PVC SWR (Grade B) Soil or Waste pipe as per IS 13592 for Pipe Diversion with necessary cutting to be done to the required length including short pieces, assorted fittings such as plug/plain tee, bend, single/double Y, offsets etc. as per IS 14735, jointing with solvent cement & rubber rings, clamping on wall using PVC pipe clips and giving water-tightness test for the pipes along with making holes in walls/floor grooving and redoing the same and brick support etc. complete as per directions of engineer-in-charge. (Pipe Diversion @ Ground & Basement Ceiling)
110mm dia (Grade B)
374
-
-
... More
Supply, installation, testing & commissioning of PVC SWR (Grade B) Soil or Waste pipe as per IS 13592 for Pipe Diversion with necessary cutting to be done to the required length including short pieces, assorted fittings such as plug/plain tee, bend, single/double Y, offsets etc. as per IS 14735, jointing with solvent cement & rubber rings, clamping on wall using PVC pipe clips and giving water-tightness test for the pipes along with making holes in walls/floor grooving and redoing the same and brick support etc. complete as per directions of engineer-in-charge. (Pipe Diversion @ Ground & Basement Ceiling)
160mm dia (Grade B)
132
-
-
... More
Supply, installation, testing & commissioning of 75mm PVC Nahani Trap as per IS 14735,with material and labour etc. complete as per directions of engineer-in-charge.
164
-
-
... More
Supply, installation, testing & commissioning of PVC Multi floor Trap as per IS 14735, with material and labour etc. complete as per directions of engineer-in-charge.
164
-
-
... More
Providing and fixing P.V.C. Rain water pipes of 160mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and One Number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete.
220
-
-
... More
Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and One Number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete.
1
-
-
... More
Providing and fixing C.I. vertical jalli of the specified size at the collection point of RWP on terrace to be with material and labour including provision of roof flashing of 6mm thickness as per details etc. complete as per directions of engineer-in-charge.
150 mm X 150 mm
1
-
-
... More
Providing and fixing in position UPVC ultra violetstabilized 110mm outer diameter cowl dome confirming toI.S.-4985 including making joints with solvent cement etc.complete
60
-
-
... More
Supply, installation, testing & commissioning of exposed on wall faces, floor, shaft & Terrace following sizes of Lead Free Solvent Weld Schedule 40 CPVC Pipes conforming to ASTM D 1785 for water supply including provision of all fittings such as elbows, Tees, unions, reducers etc. as per ASTM D 2467, cutting of pipes, jointing with solvent cement joints as per manufacturers specifications, hydraulic testing, including holes in walls, slabs etc. provision of GI Brackets & Clamps and making good the damages by bringing them to good original condition, etc. complete as directed by the engineer-in-charge. 65 mm dia
165
-
-
... More
Providing and fixing on walls/ ceiling/ floor CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
40 mm dia
160.6
-
-
... More
Providing and fixing on walls/ ceiling/ floor CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
32 mm dia
206.8
-
-
... More
Providing and fixing on walls/ ceiling/ floor CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
25 mm dia
201.3
-
-
... More
Providing and fixing on walls/ ceiling/ floor CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
20 mm dia
502.7
-
-
... More
Providing and fixing on walls/ ceiling/ floor CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
15 mm dia
1974.5
-
-
... More
Providing and fixing of CPVC Ball Stop cocks.
50 mm dia
1
-
-
... More
Providing and fixing of CPVC Ball Stop cocks.
40 mm dia
12
-
-
... More
Providing and fixing of CPVC Ball Stop cocks.
32 mm dia
1
-
-
... More
Providing and fixing of CPVC Ball Stop cocks.
25 mm dia
10
-
-
... More
Providing and fixing of CPVC Ball Stop cocks.
15 mm dia
300
-
-
... More
Supply, installation, testing & commissioning of Wafer Type Butterfly Valves with Body of Cast Iron, Disc of Cast Iron/Stainless Steel and body lining of EPDM / Nitrile Rubber including jointing with Galvanised Iron pipes including hydraulic testing (Operating pressure not less than 16 Kg/Sq.cm) etc. complete as directed by the engineer-in-charge.
65 mm dia
1
-
-
... More
Providing & fixing CI `Y' Strainer (screwed/ flanged) with stainless steel fine wire mesh perforated sheet basket with necessary flange/ unions nuts, bolts and washers complete as required (on pump suction).
50 mm dia
1
-
-
... More
Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV
24
-
-
... More
Supply & Fixing in position galvanised iron puddle flanges of approx. 60 cm length with flange on one end and welded to mild steel plate (8mm thick) in the centre etc. complete as directed by engineer-in-charge.
Flange on both end 150mm
2
-
-
... More
Supply & Fixing in position galvanised iron puddle flanges of approx. 60 cm length with flange on both end and welded to mild steel plate (8mm thick) in the centre etc. complete as directed by engineer-in-charge.
Flange on both end 100mm
2
-
-
... More
Supply & Fixing in position galvanised iron puddle flanges of approx. 60 cm length with flange on both end and welded to mild steel plate (8mm thick) in the centre etc. complete as directed by engineer-in-charge.
Flange on both end 50mm
4
-
-
... More
Supply & Fixing in position galvanised iron puddle flanges of approx. 60 cm length with flange on both end and welded to mild steel plate (8mm thick) in the centre etc. complete as directed by engineer-in-charge.
Flange on both end 32mm
4
-
-
... More
Supply & Fixing in position galvanised iron puddle flanges of approx. 60 cm length with flange on one end and welded to mild steel plate (8mm thick) in the centre etc. complete as directed by engineer-in-charge.
Flange on one end 100mm
1
-
-
... More
Supply & Fixing in position galvanised iron puddle flanges of approx. 60 cm length with flange on one end and welded to mild steel plate (8mm thick) in the centre etc. complete as directed by engineer-in-charge.
Flange on one end 65mm
2
-
-
... More
Supply & Fixing in position galvanised iron puddle flanges of approx. 60 cm length with flange on one end and welded to mild steel plate (8mm thick) in the centre etc. complete as directed by engineer-in-charge.
Flange on one end 50mm
4
-
-
... More
Supply & Fixing in position galvanised iron puddle flanges of approx. 60 cm length with flange on one end and welded to mild steel plate (8mm thick) in the centre etc. complete as directed by engineer-in-charge.
Flange on one end 32mm
1
-
-
... More
Supply & installation of Ductile Iron Manhole Covers with frame,& openable hinge of 600mm Dia. (Light Duty) for UGR including all necessary supports, grouting of the frame in RCC, making arrangements for recessed locking of the Manhole cover etc. complete as directed by engineer-in-charge. ( MATREIAL SSR + LABOUR SSR)
4
-
-
... More
Providing and fixing 40 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirements etc. complete.
Note: Contractor to note that the suction header is required to have inlet connection from the Puddle Flange @ water tanks and to the pump suction. Provision of delivery header is required to have outlet connection from the pumps. Suitable outlet flanges from the delivery mainfold / header shall be provided as required.
2
-
-
... More
Installation, Testing & Commissioning of Stainless Steel Vertical In-line Pump Sets consisting of 1 Working & 1 Standby pump having Built-in Overload Protection, Motor Housing, Suction Plate, Bottom Screen & all Screws to be of stainless steel, Motor Cover & Pump Housing to be of corrosion proof Cast Iron, Pump to have Stainless Steel Impeller & Double Mechanical seals in oil chambers, including necessary supports/ foundations, Main Suction Header & Delivery Header along with Y' Strainers,Isolation and N.R valve, Pressure Guages & Pressure Switches, all necessary fittings,and Cable from Panels to the individual pumps etc including Electrical Control Panel with 1 VFD for Operation & Control of pump-sets including provision of Pressure Vessel. complete as per directions of engineer in charge (AT TERRACE)
1 pump to run on VFD and the VFD shall be transferrable to any of the pumps
Contractor to submit the GA drawing along with the Control layout to the Consultants before manufacturing of the same.
Domestic Pumps (Pump Discharge = 3 LPS, Head = 15 m (1 W + 1 S) Contractor to submit the GA drawing along with the Control layout to the Consultants before manufacturing of the same.
1
-
-
... More
Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. calculation attached
1550
-
-
... More
Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose).foundation size for structure 0.3 x0.3x.15x 4nos=.054 for 1 system for 51 nos 500LPM x 0.054=27.54 + for for tank and heat pump tank requre approx 15.2 total=42.74=43cum, 43x3= 129
53
-
-
... More
Supplying, installing, testing and commissioning of ETC solar water heating system without heat exchanger type of 500 LPD capacity with SS water tank of 0.5 mm thickness conforming to IS1239 Part-I :2004 complete as per specification no. ESD-SHWS-ETC (50 no x 500=25000)
50
-
-
... More
Supplying and erecting 20/25 mm (ID/OD) Chlorinated polyvinyl chloride pipe (CPVC), thickness 2.6 mm conforming to IS 15778 (CTS Series) with necessary CPVC fittings and solvent cement for Solar Water Heater System as per specification No. ESD-HWP/CPVC
150
-
-
... More
Supplying and erecting 32/40 mm (ID/OD) Chlorinated polyvinyl chloride pipe (CPVC), thickness 3.8 mm conforming to IS 15778 (CTS Series) with necessary CPVC fittings and solvent cement for Solar Water Heater System as per specification No. ESD-HWP/CPVC
150
-
-
... More
Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 22 mm for solar water heater/AC system.
150
-
-
... More
Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 42 mm for solar water heater/AC system.
150
-
-
... More
Supplying and erecting ISI mark GI pipe 40 mm. dia. ‘B’ class at position with accessories complete as per specification no. CW-PLB/GP.
120
-
-
... More
Supplying and erecting non return valve 40 mm dia in position made of gun metal complete.
54
-
-
... More
Supplying and erecting 40 mm. dia. gun metal sluice valve at position with necessary materials complete.
54
-
-
... More
Supplying, installing, testing and commissioning of Monoblock Heat pump, having dimension: 995 x 785 x 1700 (mm), Input power: 2.22 kW, 400 V, 3 Ph, 50 Hz, Output power: 8 kW having hot water temperature range 35°C to 75°C and ambient temperature range for max. efficiency 7°C to 43°C, with glass lining hot water tank of 455 ltr. and min. 220 Kg at rated pressure 10 bar with two emergency heating elements operated on three operational mode: Efficiency mode, Hybrid turbo mode and Standard mode with Adaptive Energy System (AES), LED display with necessary accessories complete with 5 years ON-SITE warranty.
2
-
-
... More
Supplying and erecting fully automatic line voltage stabilizer buck and boost type for operation on input voltage 160-270 V and output voltage 200-250V rated for 5kVA maximum load and with voltmeter, selector switch, 6A/16A flush type 3 pin socket for output and with 3 core copper flexible cord and 3 pin 6/16A plug top with overload & short circuit protection complete .
2
-
-
... More
Supplying & erecting automatic control panel for 3 Phase , 415 volt, A.C, Submersible/centrifugal pump set up to 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc .
2
-
-
... More
Supplying, installation and testing and commissioning of storage type Mild Steel mixing water tank of capacity 3000 ltrs. tested to a pressure of 8 kg/cm2, insulated with 50 mm thick rock wool with wire mesh around and cladded with 26 SWG aluminium of dish end type with working pressure of 6 kg/cm2, fabricated with 6 mm thick MS plate and dished ends with 8 mm thick plates complete with man hole cover, inner side of the tank coated with FRP coating of 3 mm thickness withstand temperature of 90°C provided with collars of 2" BSP for provision to install 6 numbers of electrical heating coils if required with thermal sensors for automatic operation and integrated into the electrical circuits of the circulation pumps and the heat pump with safety valve drain, inlet and outlet nozzle, pressure gauge with all necessary accessories complete.
8
-
-
... More
Providing and fixing high-density polyethylene (HDPE) container one piece moulded triple layer water tank made out of high density polyethylene and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity up to 20000 litres.
16000
-
-
... More
Supplying and erecting chromium plated heavy duty brass stop cock for inlet pipe of water heater (15mm. dia).
54
-
-
... More
Supply Installation testing commissioning of hot water reverse return system with 2 nos. of 25mm dia solenoid valves, tempertaure based operated inline circulation pump, control and power wiring, starter/control panel etc
1
-
-
... More
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150mm in thickness. (Item No. 2.09)
2354
-
-
... More
Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete.(Lift upto 1.5m.) By Mechanical Means (Item No. 21.02)
2530.5
-
-
... More
Excavation for foundation in hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete.(Lift from 1.5 to 3.0m) By Manual Means (Item No. 21.07)
5355.3
-
-
... More
Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/murum watering, ramming etc. complete.(Lift upto 1.5 m). By Mechanical Means (Item No. 21.20)
1883.2
-
-
... More
Providing preconstructional antitermite treatment as per I.S. 6313(Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper. (Item No. 21.22, Departmental)
2675.3
-
-
... More
Providing preconstructional antitermite treatment as per I.S. 6313(Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper. (Item No. 21.24)
2128.9
-
-
... More
Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/granite/quartzite/gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 24.01)
513.5
-
-
... More
Supplying, Drilling/Cleaning hole and injecting chemical. Application to be designed separately for Rebars as Simply Supported, Moment or Splice Connection as per EC2/TR 023 or relevant tested and accepted rebar guidelines. The chemical should have ETA approval for seismic rebar as a minimum qualifying criterion. Drilling hole with double flute type drill bits or hollow drill bits to the required depth by rotary hammer drill, cleaning with brush and jet of clean air, filling resin and hardener using serrated nozzle to eliminate mixing error with standard HDE A22 battery dispenser along with piston plug. The installation and the setting instructions should be strictly followed as per the manufacturer's recommendations. The adequate diameter and embedment of rebars to be decided as per PROFIS Rebar Software & the report to be submitted to the project manager/design engineer for approval. Scanning before drilling to be done to avoid hitting existing rebars. HY 200-25mm dia, 500 to 1500mm depth (Item No. 53.13)
50
-
-
... More
Supplying, drilling/cleaning hole and fixing of Torque Controlled Expansion Anchor HST3, of sizes ranging from M8 to M24. The Anchor should be third party tested, possess ETA approval and should be pre-assembled with a galvanized bolt as per EN ISO 4042: 1999, ingenious expansion sleeve M10 and M16(galvanized) and M8, M12, M20, M24-Stainless Steel(EN ISO 4042: 1999), a nut of Strength Class 8(EN ISO 20898-2:2012) and a galvanized washer(EN ISO 4042:1999). The anchor should be approved for use in Cracked Concrete. Anchor must be tested and approved as per Seismic C1 and C2 Category of TR045. ETA to have Fire Resistance values for up to 120 mins as per EOTA TR 020 and FM Approval(use in Pipe Hangers). Anchor shall be fixed at right embedment depth as per embedment mark and activated using AT Tool Module to ensure adequate torque as per manufacture's torque tolerance published in ETA and same shall be documented and submitted to Project Manager at the time of inspection. Design of Anchor should be done as per ETAG 001 Annex C and TR045 using PROFIS Software as per actual load data and site conditions as provided by structural consultant and the report to be submitted to the project manager and design engineer for approval. Scanning before drilling to be done with PS Scanning tool to avoid rebar hits. stud anchor HST3 M24x200 30, 500 to 1500 mm depth (Item No. 53.24)
10
-
-
... More
Providing and fixing 25mm diameter steel anchor dowel in hard rock including drilling hole of 32mm diameter up to 0.75 to 1.5 mtrs depth, placing the dowel in position and effectively grouting the hole withCM 1:1 proportion etc. complete. (Item No. 12.13)
149
-
-
... More
Providing and laying Cast in situ/Exposed Ready Mix form finish cement concrete M-30 of trap/granite/quartzite/gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including Steel centering formwork, cover blocks laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 25.15)
1235
-
-
... More
Providing and laying Cast in situ/Exposed Ready Mix Form Finish cement concrete M-30 of trap/granite/quartzite/gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 25.35, Departmental)
193.3
-
-
... More
Providing and laying Cast in situ/Exposed Ready Mix Form Finish cement concrete M-30 of trap/granite/quartzite/gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 25.35, First Floor)
87.5
-
-
... More
Providing and laying Cast in situ/Exposed Ready Mix Form Finish cement concrete M-30 of trap/granite/quartzite/gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 25.35, Second Floor)
3.5
-
-
... More
FORM FINISHED FORMWORK: Providing, fabricating and erecting form work (centering and shuttering) at all levels and places wherever needed/specified as per drawing including striking with 12mm Plastic coated, marine resistant waterproof ply/Smooth finished MS plates with adjustable steel props of acceptable Staging system and with sufficient bracing as approved by consultant, design as per IS 14687 or latest, at any level including using shuttering oil as per structural consultants specifications, strutting, propping, removing the shuttering after stipulated period and re-propping. Cost to include designing of proper form work and staging system to suit the requirements,Submission of design calculations and shop drawings for approval,sealing the joints with heavy duty brown self adhesive tape, aligning to line and levels including M.S. Ties, PVC Spacer, Providing openings/ cutouts/ pockets, applying deshuttering chemical, Deshuttering as approved by the consultant etc., complete at all levels, double/tripple heights and profiles.[Measurement will be paid for the area of shuttering coming in contact with concrete only] Foundations / Raft
150
-
-
... More
FORM FINISHED FORMWORK: Providing, fabricating and erecting form work (centering and shuttering) at all levels and places wherever needed/specified as per drawing including striking with 12mm Plastic coated, marine resistant waterproof ply/Smooth finished MS plates with adjustable steel props of acceptable Staging system and with sufficient bracing as approved by consultant, design as per IS 14687 or latest, at any level including using shuttering oil as per structural consultants specifications, strutting, propping, removing the shuttering after stipulated period and re-propping. Cost to include designing of proper form work and staging system to suit the requirements,Submission of design calculations and shop drawings for approval,sealing the joints with heavy duty brown self adhesive tape, aligning to line and levels including M.S. Ties, PVC Spacer, Providing openings/ cutouts/ pockets, applying deshuttering chemical, Deshuttering as approved by the consultant etc., complete at all levels, double/tripple heights and profiles.[Measurement will be paid for the area of shuttering coming in contact with concrete only] Columns: Rectangular / Square / Segmental
148
-
-
... More
FORM FINISHED FORMWORK: Providing, fabricating and erecting form work (centering and shuttering) at all levels and places wherever needed/specified as per drawing including striking with 12mm Plastic coated, marine resistant waterproof ply/Smooth finished MS plates with adjustable steel props of acceptable Staging system and with sufficient bracing as approved by consultant, design as per IS 14687 or latest, at any level including using shuttering oil as per structural consultants specifications, strutting, propping, removing the shuttering after stipulated period and re-propping. Cost to include designing of proper form work and staging system to suit the requirements,Submission of design calculations and shop drawings for approval,sealing the joints with heavy duty brown self adhesive tape, aligning to line and levels including M.S. Ties, PVC Spacer, Providing openings/ cutouts/ pockets, applying deshuttering chemical, Deshuttering as approved by the consultant etc., complete at all levels, double/tripple heights and profiles.[Measurement will be paid for the area of shuttering coming in contact with concrete only] Columns: Circular / Elliptical / Semi-Curved ( Rate only)
135
-
-
... More
FORM FINISHED FORMWORK: Providing, fabricating and erecting form work (centering and shuttering) at all levels and places wherever needed/specified as per drawing including striking with 12mm Plastic coated, marine resistant waterproof ply/Smooth finished MS plates with adjustable steel props of acceptable Staging system and with sufficient bracing as approved by consultant, design as per IS 14687 or latest, at any level including using shuttering oil as per structural consultants specifications, strutting, propping, removing the shuttering after stipulated period and re-propping. Cost to include designing of proper form work and staging system to suit the requirements,Submission of design calculations and shop drawings for approval,sealing the joints with heavy duty brown self adhesive tape, aligning to line and levels including M.S. Ties, PVC Spacer, Providing openings/ cutouts/ pockets, applying deshuttering chemical, Deshuttering as approved by the consultant etc., complete at all levels, double/tripple heights and profiles.[Measurement will be paid for the area of shuttering coming in contact with concrete only] Beams: Strainght / Curved / Segmental
139
-
-
... More
FORM FINISHED FORMWORK: Providing, fabricating and erecting form work (centering and shuttering) at all levels and places wherever needed/specified as per drawing including striking with 12mm Plastic coated, marine resistant waterproof ply/Smooth finished MS plates with adjustable steel props of acceptable Staging system and with sufficient bracing as approved by consultant, design as per IS 14687 or latest, at any level including using shuttering oil as per structural consultants specifications, strutting, propping, removing the shuttering after stipulated period and re-propping. Cost to include designing of proper form work and staging system to suit the requirements,Submission of design calculations and shop drawings for approval,sealing the joints with heavy duty brown self adhesive tape, aligning to line and levels including M.S. Ties, PVC Spacer, Providing openings/ cutouts/ pockets, applying deshuttering chemical, Deshuttering as approved by the consultant etc., complete at all levels, double/tripple heights and profiles.[Measurement will be paid for the area of shuttering coming in contact with concrete only] Coffer Beams: Strainght / Curved / Segmental(Rate only)
135
-
-
... More
FORM FINISHED FORMWORK: Providing, fabricating and erecting form work (centering and shuttering) at all levels and places wherever needed/specified as per drawing including striking with 12mm Plastic coated, marine resistant waterproof ply/Smooth finished MS plates with adjustable steel props of acceptable Staging system and with sufficient bracing as approved by consultant, design as per IS 14687 or latest, at any level including using shuttering oil as per structural consultants specifications, strutting, propping, removing the shuttering after stipulated period and re-propping. Cost to include designing of proper form work and staging system to suit the requirements,Submission of design calculations and shop drawings for approval,sealing the joints with heavy duty brown self adhesive tape, aligning to line and levels including M.S. Ties, PVC Spacer, Providing openings/ cutouts/ pockets, applying deshuttering chemical, Deshuttering as approved by the consultant etc., complete at all levels, double/tripple heights and profiles.[Measurement will be paid for the area of shuttering coming in contact with concrete only] Slabs: (flat, sloping, cantilevered or any other position) and Staircases
147
-
-
... More
FORM FINISHED FORMWORK: Providing, fabricating and erecting form work (centering and shuttering) at all levels and places wherever needed/specified as per drawing including striking with 12mm Plastic coated, marine resistant waterproof ply/Smooth finished MS plates with adjustable steel props of acceptable Staging system and with sufficient bracing as approved by consultant, design as per IS 14687 or latest, at any level including using shuttering oil as per structural consultants specifications, strutting, propping, removing the shuttering after stipulated period and re-propping. Cost to include designing of proper form work and staging system to suit the requirements,Submission of design calculations and shop drawings for approval,sealing the joints with heavy duty brown self adhesive tape, aligning to line and levels including M.S. Ties, PVC Spacer, Providing openings/ cutouts/ pockets, applying deshuttering chemical, Deshuttering as approved by the consultant etc., complete at all levels, double/tripple heights and profiles.[Measurement will be paid for the area of shuttering coming in contact with concrete only] Coffer Slab: (flat, sloping, cantilevered or any other position) and Staircases) (Rate only)
120
-
-
... More
FORM FINISHED FORMWORK: Providing, fabricating and erecting form work (centering and shuttering) at all levels and places wherever needed/specified as per drawing including striking with 12mm Plastic coated, marine resistant waterproof ply/Smooth finished MS plates with adjustable steel props of acceptable Staging system and with sufficient bracing as approved by consultant, design as per IS 14687 or latest, at any level including using shuttering oil as per structural consultants specifications, strutting, propping, removing the shuttering after stipulated period and re-propping. Cost to include designing of proper form work and staging system to suit the requirements,Submission of design calculations and shop drawings for approval,sealing the joints with heavy duty brown self adhesive tape, aligning to line and levels including M.S. Ties, PVC Spacer, Providing openings/ cutouts/ pockets, applying deshuttering chemical, Deshuttering as approved by the consultant etc., complete at all levels, double/tripple heights and profiles.[Measurement will be paid for the area of shuttering coming in contact with concrete only] RCC Pardi and Shear Walls: Strainght / Curved / Segmental
145
-
-
... More
FORM FINISHED FORMWORK: Providing, fabricating and erecting form work (centering and shuttering) at all levels and places wherever needed/specified as per drawing including striking with 12mm Plastic coated, marine resistant waterproof ply/Smooth finished MS plates with adjustable steel props of acceptable Staging system and with sufficient bracing as approved by consultant, design as per IS 14687 or latest, at any level including using shuttering oil as per structural consultants specifications, strutting, propping, removing the shuttering after stipulated period and re-propping. Cost to include designing of proper form work and staging system to suit the requirements,Submission of design calculations and shop drawings for approval,sealing the joints with heavy duty brown self adhesive tape, aligning to line and levels including M.S. Ties, PVC Spacer, Providing openings/ cutouts/ pockets, applying deshuttering chemical, Deshuttering as approved by the consultant etc., complete at all levels, double/tripple heights and profiles.[Measurement will be paid for the area of shuttering coming in contact with concrete only] RELIEF FORMWORK (Rate only)
123
-
-
... More
FORM FINISHED FORMWORK: Providing, fabricating and erecting form work (centering and shuttering) at all levels and places wherever needed/specified as per drawing including striking with 12mm Plastic coated, marine resistant waterproof ply/Smooth finished MS plates with adjustable steel props of acceptable Staging system and with sufficient bracing as approved by consultant, design as per IS 14687 or latest, at any level including using shuttering oil as per structural consultants specifications, strutting, propping, removing the shuttering after stipulated period and re-propping. Cost to include designing of proper form work and staging system to suit the requirements,Submission of design calculations and shop drawings for approval,sealing the joints with heavy duty brown self adhesive tape, aligning to line and levels including M.S. Ties, PVC Spacer, Providing openings/ cutouts/ pockets, applying deshuttering chemical, Deshuttering as approved by the consultant etc., complete at all levels, double/tripple heights and profiles.[Measurement will be paid for the area of shuttering coming in contact with concrete only] GROOVES IN CONCRETE SURFACES (as per pattern) (trapizoidal section) (using teakwood patti) 25 mm wide. (Rate only)
110
-
-
... More
FORM FINISHED FORMWORK: Providing, fabricating and erecting form work (centering and shuttering) at all levels and places wherever needed/specified as per drawing including striking with 12mm Plastic coated, marine resistant waterproof ply/Smooth finished MS plates with adjustable steel props of acceptable Staging system and with sufficient bracing as approved by consultant, design as per IS 14687 or latest, at any level including using shuttering oil as per structural consultants specifications, strutting, propping, removing the shuttering after stipulated period and re-propping. Cost to include designing of proper form work and staging system to suit the requirements,Submission of design calculations and shop drawings for approval,sealing the joints with heavy duty brown self adhesive tape, aligning to line and levels including M.S. Ties, PVC Spacer, Providing openings/ cutouts/ pockets, applying deshuttering chemical, Deshuttering as approved by the consultant etc., complete at all levels, double/tripple heights and profiles.[Measurement will be paid for the area of shuttering coming in contact with concrete only] GROOVES IN CONCRETE SURFACES (as per pattern) (trapizoidal section) (using teakwood patti) 20 mm wide. (Rate only)
115
-
-
... More
MURALS: Providing, fabricating, erecting and fixing in position shuttering formwork as per pattern and sizing using specializd material (details to be submitted by the contractor while quoting), giving fair finished concrete surfaces, making leak proof joints, using required couplers, tie bolts, M.S. Ties, concrete Spacer, providing openings/ cut-outs/ pockets, etc.; using required deshuttering emulsion which will not stain the concrete, etc. complete at all height, depths, lead & lift and required any height staging and supporting sturdy and braced. Also include removing & dismantling the aforesaid assembly after specified or as approved period from the day of casting of concrete.(Measurement: Surface area around the mural to the nearest square or rectangle or circle) (Proposed Material: Aluminium Cast/ Teak Wood/ MDF/ Fibreglass) Rate to include smooth finish and rendering if required, etc. all complete to the satisfaction of PM. On Wall ( rate only)
10
-
-
... More
MURALS: Providing, fabricating, erecting and fixing in position shuttering formwork as per pattern and sizing using specializd material (details to be submitted by the contractor while quoting), giving fair finished concrete surfaces, making leak proof joints, using required couplers, tie bolts, M.S. Ties, concrete Spacer, providing openings/ cut-outs/ pockets, etc.; using required deshuttering emulsion which will not stain the concrete, etc. complete at all height, depths, lead & lift and required any height staging and supporting sturdy and braced. Also include removing & dismantling the aforesaid assembly after specified or as approved period from the day of casting of concrete.(Measurement: Surface area around the mural to the nearest square or rectangle or circle) (Proposed Material: Aluminium Cast/ Teak Wood/ MDF/ Fibreglass) Rate to include smooth finish and rendering if required, etc. all complete to the satisfaction of PM. On Ceiling ( rate only)
10
-
-
... More
Providing and laying Cast in situ/Exposed Ready Mix Form Finish cement concrete in M-30 of trap/granite/quartzite/gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (As per SSR consumption of M30 grade of concrete has only change in extra 25kg of cement rest all is same, so adding 0.5 bag of cement in M-25 RCC pardi concrete) (Item No. 26.19)
902.5
-
-
... More
Providing and laying Cast in situ/Exposed Ready Mix Form Finish cement concrete in M-30 of trap/granite/quartzite/gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (As per SSR consumption of M30 grade of concrete has only change in extra 25kg of cement rest all is same, so adding 0.5 bag of cement in M-25 RCC pardi concrete) (Item No. 26.19, First Floor)
165.6
-
-
... More
Providing and laying Cast in situ/Exposed Ready Mix Form Finish cement concrete in M-30 of trap/granite/quartzite/gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (As per SSR consumption of M30 grade of concrete has only change in extra 25kg of cement rest all is same, so adding 0.5 bag of cement in M-25 RCC pardi concrete) (Item No. 26.19, Second Floor)
25
-
-
... More
Providing and laying Cast in situ/Exposed Ready Mix Form Finish cement concrete M-30 of trap/granite/quartzite/gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 25.54)
555
-
-
... More
Providing and laying Cast in situ/Exposed Ready Mix Form Finish cement concrete M-30 of trap/granite/quartzite/gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade)(Item No. 25.54, First Floor)
344.7
-
-
... More
Providing and laying Cast in situ/Exposed Ready Mix Form Finish cement concrete M-30 of trap/granite/quartzite/gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 25.54,Second Floor)
210.1
-
-
... More
Providing and laying Cast in situ/Exposed Ready Mix Form Finish cement concrete M-30 of trap/granite/quartzite/gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 25.54, Third Floor)
27.6
-
-
... More
Filling in plinth and floors with approved excavated material in 15cm. to 20cm. Layers including watering and compacting etc. complete. (Item No. 21.36)
110
-
-
... More
Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15cm to 20cm including watering and compaction etc. complete. (Item No. 21.37)
55
-
-
... More
Providing dry/trap/granite/quartzite/gneiss rubble stone soling 15cm to 20cm thick including hand packing and compacting etc. complete. (Item No. 21.38)
355.5
-
-
... More
Providing and laying Cast in situ/Exposed Ready Mix Form Finish C.C. M-30 of trap metal for RCC rectangular grid beam with slab as per detailed design and drawing or as directed including dewatering if necessary, steel centering, formwork, cover blocks, laying/pumping, compacting, curing, finishing and roughening them to form surface with C.M. 1:3 of sufficient minimum thickness to give smooth and even surface or roughening them if special finish is to be provided and curing complete(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant(pan mixer). With fine aggregate(Crushed sand VSI Grade) (Item No. 26.62)
144.8
-
-
... More
Providing and laying Cast in situ/Exposed Ready Mix Form Finish C.C. M-30 of trap metal for RCC rectangular grid beam with slab as per detailed design and drawing or as directed including dewatering if necessary, steel centering, formwork, cover blocks, laying/pumping, compacting, curing, finishing and roughening them to form surface with C.M. 1:3 of sufficient minimum thickness to give smooth and even surface or roughening them if special finish is to be provided and curing complete(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant(pan mixer). With fine aggregate(Crushed sand VSI Grade) (Item No. 26.62, First Floor)
144.8
-
-
... More
Providing and laying Cast in situ/Exposed Ready Mix Form Finish cement concrete M-30 of trap/granite/quartzite/gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 25.74)
124
-
-
... More
Providing and laying Cast in situ/Exposed Ready Mix Form Finish cement concrete M-30 of trap/granite/quartzite/gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 25.74, First Floor)
124
-
-
... More
Providing and laying Cast in situ/Exposed Ready Mix Form Finish cement concrete M-30 of trap/granite/quartzite/gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 25.74, Second Floor)
122.6
-
-
... More
Providing and laying Cast in situ/Exposed Ready Mix Form Finish cement concrete in M-30 of trap/quartzite/granite/gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete.(Excluding reinforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (As per SSR consumption of M30 grade of concrete has only change in extra 25kg of cement rest all is same, so adding 0.5 bag of cement in M-25 RCC pardi concrete) (Item No. 26.26)
57.3
-
-
... More
Providing and laying Cast in situ/Exposed Ready Mix Form Finish cement concrete in M-30 of trap/quartzite/granite/gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete.(Excluding reinforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (As per SSR consumption of M30 grade of concrete has only change in extra 25kg of cement rest all is same, so adding 0.5 bag of cement in M-25 RCC pardi concrete) (Item No. 26.26, First Floor)
28.7
-
-
... More
Providing and laying Cast in situ/Exposed Ready Mix Form Finish cement concrete in M-20 of trap/granite/quartzite/gneiss metal for R.C.C. coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting, curing, finishing and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 26.23)
19.7
-
-
... More
Providing and laying Cast in situ/Exposed Ready Mix Form Finish cement concrete in M-20 of trap/granite/quartzite/gneiss metal for R.C.C. coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting, curing, finishing and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 26.23, First Floor)
9.9
-
-
... More
Providing and laying Cast in situ/Exposed Ready Mix Form Finish cement concrete in M-20 of trap/granite/quartzite/gneiss metal for R.C.C. coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting, curing, finishing and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 26.23, Second Floor)
3.3
-
-
... More
Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. (Item No. 26.33)
401.8
-
-
... More
Providing and fixing 20 to 25mm thick rough shahabad box type waterproofing treatment to vertical outside faces of Reinforced Cement concrete walls of basement or underground floor including filling the gap of 25mm between rough shahabad and R.C.C. walls with cement grout mixed with water proofing liquid Algae proof or other alike with one tile lift method, brushing the joints horizontally with cement slurry mixed with water proofing liquid for width 30 to 35mm and sloping coping over topmost tile with cement mortar 1:3, butting the bottom most with Cement concrete 1:2:4 mixed with water proofing liquid, curing, with 7 years guarantee on court fee stamp of Rs.100/-with ponding test etc complete.(excluding Cement concrete 1:3:6 base concrete) (Item No. 31.13)
959.7
-
-
... More
Providing second class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. (Item No. 27.01)
4.4
-
-
... More
Labour rate for coursed rubble masonry second sort of trap/granite/quartzite/gneiss stones in cement mortar 1:6 in external walls of plinth including bailing out water manually, striking joints inside and raking out joints from outside and watering etc.complete (Item No. 28.09)
5.9
-
-
... More
Providing and constructing masonry in precast solid Concrete Block(Grade D-50 As per I.S. 2185, Part-I, 1974, Reframed 1987) having compressive strength 5-00 N/mm2) of size(300mm x 200mm x 150mm) in cement mortar 1:6 for superstructure including striking joints on unexposed faces, racking out joints on exposed faces, watering, curing and scaffolding etc. complete. (Item No. 29.03)
108.5
-
-
... More
Providing and constructing masonry in precast solid Concrete Block(Grade D-50 As per I.S. 2185, Part-I, 1974, Reframed 1987) having compressive strength 5-00 N/mm2) of size(300mm x 200mm x 150mm) in cement mortar 1:6 for superstructure including striking joints on unexposed faces, racking out joints on exposed faces, watering, curing and scaffolding etc. complete.(Item No. 29.03, First Floor)
54.3
-
-
... More
Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185(Part 3)-1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete.(The test shall be carried out conforming to IS:6441(Part I)-1972) (Item No. 27.15)
326.8
-
-
... More
Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185(Part 3)-1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete.(The test shall be carried out conforming to IS:6441(Part I)-1972) (Item No. 27.15, First Floor)
165.7
-
-
... More
Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185(Part 3)-1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete.(The test shall be carried out conforming to IS:6441(Part I)-1972) (Item No. 27.15, Second Floor)
38
-
-
... More
Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness incm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding incm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete. (Item No. 31.26)
33.9
-
-
... More
Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness incm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding incm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete. (Item No. 31.26, First Floor)
16.9
-
-
... More
Providing and fixing chicken mesh of 22 gauge, with about 30cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete/B.B.masonry and or tying by binding wire etc. complete. (Item No. 32.26)
697
-
-
... More
Providing and fixing chicken mesh of 22 gauge, with about 30cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete/B.B.masonry and or tying by binding wire etc. complete. (Item No. 32.26, First Floor)
348.5
-
-
... More
Providing and fixing chicken mesh of 22 gauge, with about 30cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete/B.B.masonry and or tying by binding wire etc. complete. (Item No. 32.26, Second Floor)
154.3
-
-
... More
Providing waterproof plaster in W.C. and bath 12mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 Kilogram. per bag of cement of approved make and manufacturer and curing etc. complete.(Excluding Tiles)(As directed by Engineer in Charge) (Item No. 31.06)
583.3
-
-
... More
Providing waterproof plaster in W.C. and bath 12mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 Kilogram. per bag of cement of approved make and manufacturer and curing etc. complete.(Excluding Tiles)(As directed by Engineer in Charge) (Item No. 31.06, First Floor)
291.7
-
-
... More
Providing waterproof plaster in W.C. and bath 12mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 Kilogram. per bag of cement of approved make and manufacturer and curing etc. complete.(Excluding Tiles)(As directed by Engineer in Charge) (Item No. 31.06, Second Floor)
424.2
-
-
... More
Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15mm thick in C.M. 1:4 and rough cast treatment 12mm thick in proportion 1:1 1/2:3 including scaffolding and fourteen days curing complete. (Item No. 32.12)
226.5
-
-
... More
Supplying & providing approved colour washed stone grit plaster 1:0:5:2 (1cement: 0.5 dolomite powder: 2 stone chipping 10mm nominal size) in panels all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings, complete as per specification and direction of Engineer in 50% white cement and 50% ordinary grey cement in top layer including scaffolding staging etc complete.
226.5
-
-
... More
Providing and applying gypsum plaster(with Gypsum material) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface/or on newly brick surface(Excluding rough cast plaster) in all position including preparing and Finishing the surface scaffolding etc.complete. (Item No. 32.31)
4151.6
-
-
... More
Providing and applying gypsum plaster(with Gypsum material) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface/or on newly brick surface(Excluding rough cast plaster) in all position including preparing and Finishing the surface scaffolding etc.complete. (Item No. 32.31, First Floor)
1974.9
-
-
... More
Providing and applying gypsum plaster(with Gypsum material) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface/or on newly brick surface(Excluding rough cast plaster) in all position including preparing and Finishing the surface scaffolding etc.complete. (Item No. 32.31, Second Floor)
51.9
-
-
... More
Providing and fixing 1200mm high S.S.304 Grade Stainless steel railing with 40mm diameter and 1.5mm thick at top, 40mm diameter and 1.5mm thick vertical supports spaced at 1.5m center to center and 8mm thick toughened glass including fabricating, fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete (Item No. 40.07)
207.7
-
-
... More
Providing and fixing 40mm diameter and 1.5mm thick Stainless steel hand railing in S.S.304 Grade including fabricating, fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete (Item No. 40.06)
375.8
-
-
... More
Providing and laying polished hand cut Kotah Stone flooring 25mm to 30mm thick and 45cm to 55cm wide in plain/diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning complete. (Item No. 33.08)
594.9
-
-
... More
Providing and laying polished hand cut Kotah Stone flooring 25mm to 30mm thick and 45cm to 55cm wide in plain/diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning complete. (Item No. 33.08, First Floor)
341.3
-
-
... More
Providing and laying in position flooring of telephone black/Amba White/Cat bary brown/Ruby red/Ocean Brown granite stone of approved shade and size 18mm to 20mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. (Item No. 33.34)
2054.2
-
-
... More
Providing and laying in position flooring of telephone black/Amba White/Cat bary brown/Ruby red/Ocean Brown granite stone of approved shade and size 18mm to 20mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. (Item No. 33.34, First Floor)
893.4
-
-
... More
Providing and laying Antiskid ceramic tiles having size 590mm to 605mm x to 605mm of 8 to 10mm thickness and confirming IS. 15622-2006(Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. (Item No. 33.42)
162.2
-
-
... More
Providing and laying Antiskid Ceramic tiles having size 590mm to 605mm x to 605mm of 8 to 10mm thickness and confirming IS. 15622-2006(Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. (Item No. 33.42, First Floor)
81.1
-
-
... More
Providing and laying vitrified mirror/glossy finish tiles having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS. 15622-2006(group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete (Item No. 33.41, Second Floor)
156.1
-
-
... More
Providing and laying vitrified mirror/glossy finish tiles having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS. 15622-2006(group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete (Item No. 33.41, First Floor)
77.2
-
-
... More
Providing and fixing machine cut machine polished 18mm to 20mm thick telephone black/Amba White/Cat bary brown/RBI red/Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. (Item No. 33.35)
145.8
-
-
... More
Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. (Item No. 33.18, Second Floor)
16.7
-
-
... More
Providing and laying cement concrete flooring 50mm thick with M20 cement concrete laid to proper level and slope in alternate bays including compaction, filling joints, marking lines to give the appearance of tiles of 30cm x 30cm or other size laid diagonally/square etc. finishing smooth(with extra cement) in any colour as directed and curing etc. complete. With Crushed Sand. (Item No. 33.16)
19.1
-
-
... More
Providing and laying cement concrete flooring 50mm thick with M20 cement concrete laid to proper level and slope in alternate bays including compaction, filling joints, marking lines to give the appearance of tiles of 30cm x 30cm or other size laid diagonally/square etc. finishing smooth(with extra cement) in any colour as directed and curing etc. complete. With Crushed Sand. (Item No. 33.16, First Floor)
19.1
-
-
... More
Providing & Fixing in position, Polyvinyl chloride (PVC) Carpet more than 800+ gsm, of approved make along with 5mm underlay as per Architectural & Acoustical Design & Instructions & Complete in all aspects including all materials labour, finishing etc. complete.
28.7
-
-
... More
Providing and fixing in required position skirting or dado of polished Kotah Stone slab 25mm to 30mm thick fixed on base on plaster of cement mortar 1:4 including cement float, filling joints with cement slurry, curing rubbing, polishing and cleaning complete. (Item No. 33.81, First Floor)
3
-
-
... More
Providing and laying vitrified mirror/glossy finish tiles having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS. 15622-2006(group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete (Item No. 33.41)
477.4
-
-
... More
Providing and laying vitrified mirror/glossy finish tiles having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS. 15622-2006(group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete (Item No. 33.41)
238.7
-
-
... More
Providing and applying one coat of seal cement primer of approved manufacture and shed including scaffolding preparing the surface by cleaning dirt and other foreign matters, scrapping if necessary including scaffolding etc. complete. (Item No. 35.22)
4151.6
-
-
... More
Providing and applying one coat of seal cement primer of approved manufacture and shed including scaffolding preparing the surface by cleaning dirt and other foreign matters, scrapping if necessary including scaffolding etc. complete. (Item No. 35.22, First Floor)
1974.9
-
-
... More
Providing and applying one coat of seal cement primer of approved manufacture and shed including scaffolding preparing the surface by cleaning dirt and other foreign matters, scrapping if necessary including scaffolding etc. complete. (Item No. 35.22, Second Floor)
51.9
-
-
... More
Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. (Item No. 32.34)
4151.6
-
-
... More
Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. (Item No. 32.34, First Floor)
1974.9
-
-
... More
Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. (Item No. 32.34, Second Floor)
51.9
-
-
... More
Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in one coat including scaffolding, preparing the surfaces.(excluding the primer coat.)etc. complete. (Item No. 36.10)
4151.6
-
-
... More
Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in one coat including scaffolding, preparing the surfaces.(excluding the primer coat.)etc. complete. (Item No. 36.10, First Floor)
1974.9
-
-
... More
Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in one coat including scaffolding, preparing the surfaces.(excluding the primer coat.)etc. complete. (Item No. 36.10, Second Floor)
51.9
-
-
... More
Providing and applying white-wash in two coats on old/new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete. (Item No. 36.03)
394.6
-
-
... More
Providing and applying white-wash in two coats on old/new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete. (Item No. 36.03, First Floor)
197.3
-
-
... More
Providing and applying white-wash in two coats on old/new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete. (Item No. 36.03, Second Floor)
51.3
-
-
... More
Providing and fixing Modular false ceiling of 600 x 600mm center to center and 13mm thick square mineral fiber board to be fixed on frame work of alluminium sections for suspended false ceiling consisting of alluminium T 2"x1 "(50mm x 40mm) weighing 0.39 Kilogram/m at 60cms center center and fixed with " x "(15 x 15mm) flanges weighing 0.19 Kilogram/m suspended on 6mm dia mild steel rod weighing 0.22 Kilogram/m, fixed on wall and beams including rounding of the edges with alluinium T of 2" x 1 "(50mm x 40mm) weighing 0.39 Kilogram/m etc.(all alluminium sections shall be anodized) including all labour, material, lifts etc. complete. (Item No. 38.52)
835
-
-
... More
Providing and fixing Modular false ceiling of 600 x 600mm center to center and 13mm thick square mineral fiber board to be fixed on frame work of alluminium sections for suspended false ceiling consisting of alluminium T 2"x1 "(50mm x 40mm) weighing 0.39 Kilogram/m at 60cms center center and fixed with " x "(15 x 15mm) flanges weighing 0.19 Kilogram/m suspended on 6mm dia mild steel rod weighing 0.22 Kilogram/m, fixed on wall and beams including rounding of the edges with alluinium T of 2" x 1 "(50mm x 40mm) weighing 0.39 Kilogram/m etc.(all alluminium sections shall be anodized) including all labour, material, lifts etc. complete. (Item No. 38.52, First Floor)
288.7
-
-
... More
Providing and fixing in position Gypsum board false ceiling with 12.5mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete. (Item No. 38.51)
50
-
-
... More
Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5mm thickness in Global white color tile to be laid on grid systems with 15mm wide T-section flanges color white having rotary stitching on the Main Runner, 1200mm and 600mm Cross Tees.Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5mm thickness in Global white color tile to be laid on grid systems with 15mm wide T-section flanges color white having rotary stitching on the Main Runner, 1200mm and 600mm Cross Tees.products approved as per GRIHA and BS 476 etc. complete. (Item No. 38.48)
146.8
-
-
... More
Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5mm thickness in Global white color tile to be laid on grid systems with 15mm wide T-section flanges color white having rotary stitching on the Main Runner, 1200mm and 600mm Cross Tees.Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5mm thickness in Global white color tile to be laid on grid systems with 15mm wide T-section flanges color white having rotary stitching on the Main Runner, 1200mm and 600mm Cross Tees.products approved as per GRIHA and BS 476 etc. complete. (Item No. 38.48, First Floor)
67.7
-
-
... More
Providing and preparing kitchen otta up to 75cm width, made up from 30mm thick and 75cm high vertical support for kadppa at 1m. c/c of 25mm thick both side polished kadappa middle shelf and bottom of 20mm thick one side polished kadappa with facia patti of 20 x 50mm kadappa including all material labour cutting fixing with cement mortar and araldite curing polished and cleaning etc. complete. (Item No. 33.38)
9
-
-
... More
Providing and preparing kitchen otta up to 75cm width, made up from 30mm thick and 75cm high vertical support for kadppa at 1m. c/c of 25mm thick both side polished kadappa middle shelf and bottom of 20mm thick one side polished kadappa with facia patti of 20 x 50mm kadappa including all material labour cutting fixing with cement mortar and araldite curing polished and cleaning etc. complete. (Item No. 33.38)
4.5
-
-
... More
Providing and fixing frame with/without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete (Item No. 39.01)
3.2
-
-
... More
Providing and fixing frame with/without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete (Item No. 39.01, First Floor)
1.4
-
-
... More
Providing and fixing frame with/without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete (Item No. 39.01)
0.1
-
-
... More
Providing and fixing solid core flush door shutter in double leaf 32mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. (Item No. 39.95)
16.2
-
-
... More
Providing and fixing solid core flush door shutter in double leaf 32mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. (Item No. 39.95, First Floor)
8.1
-
-
... More
Providing and fixing solid core flush door shutter in single leaf 32mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. (Item No. 39.09)
18.1
-
-
... More
Providing and fixing solid core flush door shutter in single leaf 32mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. (Item No. 39.09, First Floor)
3.4
-
-
... More
Providing and fixing iron painted MS door with thickness 3mm double door/single door with frame and Fittings etc complete.
54.5
-
-
... More
Providing and fixing iron painted MS door with thickness 3mm double door/single door with frame and Fittings etc complete.(First Floor)
42.4
-
-
... More
Providing and fixing iron painted MS door with thickness 3mm double door/single door with frame and Fittings etc complete.(Second Floor)
13
-
-
... More
Providing and Fixing 12mm toughened Glass door shutter with Fittings, etc complete.
215
-
-
... More
Providing and laying telephone black/Amba White/Cadburybrown/Ruby red/Ocean Brown granite stone of 18 to 20mm thick for door frame/dado/window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete. (Item No. 33.68)
2.9
-
-
... More
Providing cement based water proofing treatment to terraces(Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/-including ponding test etc. complete. (Item No. 31.04, Second Floor)
698.2
-
-
... More
Providing structural steel work of rectangular hollow steel section for steel trusses, other similar trussed items like purlin and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade complete. (Item No. 23.11, Second Floor)
21
-
-
... More
Providing and fixing 20mm dia. mild steel bar upto 0.5 M. length for anchor rods with necessary threading nuts and bolts etc. complete. (Item No. 38.32)
210
-
-
... More
1.Roofing Sheet (Top Layer): Supply and fixing of MxSeam(R) Standing Seam Profile (Factoryroll formed length upto 12 mtr.) of Maxroof having nominal 480 mm effective cover width and46 mm corrugation depth in Bare Galvalume Steel materials. The feed material is manufactured out of nominal 0.55 mm Total coated thickness (TCT), High tensile steel with250 to 300 MPa yield strength, metallic hot dipped coated with Aluminium-Zinc alloy coating(55% Aluminium, 43.3% Zinc & 1.6% Silicon) as per AS 1397 AZ150 having min. 150 grams/sq. m. total on both sides. The roof panels shall be side lapped with seaming process involvesthe male and female ribs snuggly anchored on the special designed GI Clip Head and clips are fixed to structural members by self-drilling screws. (Tata BlueScope or Jsw Make Base Coils) Color: Wind Spray (Profile- MxSEAM) MAKE -CLASSIC ZIP400 2.Insulation layer: Rockwool Insulation layer having 100 mm thick, 48 kg/m3 density. 3.Vapour Control Layer: Supply & Installation of vapour control layer upto 150 micron thickness to be laid below rockwool insulation. 4.Top Hat Bracket with Z Type Spacer: Supply & Installation of 40 mm height Top Hat Bracket with 40 mm Height Z GI Sub-girt to be fixed with help of self tapping screws at every Top Hat Bracket location over liner sheets to accommodate 100 mm thick insulation, the height of 100 mm will cater the thickness of insulation. (Size - 40x50x40x1.5mm Thk). 5.Liner Roofing Sheet (Bottom Layer): Linear Color Coated Galvalume Roofing Sheet in MxLine 1050 profile fixed over purlins with self tapping screws. The feed material is manufactured out of nominal 0.42 mm Base Metal thaickness (BMT) 0.47 mm Total coated thickness (TCT), High tensile steel with minimum 550 MPa yield strength, metallic hot dipped coated with Aluminium-Zinc alloy coating (55% Aluminium, 43.3% Zinc & 1.6% Silicon) as per AS 1397 AZ150 having min. 150 grams/ sq. m. total on both sides. (Tata BlueScope Steel Ltd Make Base Coil) (Profile - MxLINE) Color Surf-mist with reverse Profile. (Item No. 38.37, Second Floor)
414.3
-
-
... More
Flashings: Supply & fixing of 0.55mm thick colour coated Galvalume flashing for above matching profile upto 600mm Girth. Supply length would be 2.5m.(Tata Blue Scope Steel Ltd Make Base Coli) (Second Floor)
150
-
-
... More
Supply and installation of cubicles of width and depth as per Athena Lite-SS Series Cubicles-Std Sizes(W x D x H): 900mm x 1550mm x 2105mm, (Height is including 100mm gap from bottom, Door Width-600mm specifications/site drawings). Cubicle height to be 2105mm. Made from solid grade compact high pressure laminate as per IS:2046 and EN-438 manufactured under high specific pressure 5 MPa and temperature 120C, All doors will be of single colour and made of 12mm thick Merino HPL compact panel. The doors will have chamfered edges. Nos door will be supported by 3 stainless steel made hinges affixed to the pilasters. Size of panels to be as per drawing. HARDWARE & ACCESSORIES are H shaped(Top) head frame structure made of extruded Aluminium grade 6063 T5-50 micron epoxy powder coated for surface protection, Size to be 125x70x5T. Corner joinery section, Size to be 40x16.5x1.8T. U-Channel Wall joinery section, Size to be 22x16x1.6T. Door stopper section, Size to be 21x12.5x1.6T. Spring loaded Butt Hinges made from Stainless steel grade 304. Surface finish to be matt type. Covers to be lacor coated.etc complete. (Item No. 51.162)
46.6
-
-
... More
Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. (Item No. 23.01)
13.5
-
-
... More
Providing and fixing in position aluminium openable window of any size as per detailed drawing and as directed by Engineerincharge with all necessary alluminium sections including necessary fixtures and fastening with 5mm thick clear float glass etc. complete. :: b) Powder Coated (Item No. 39.51b)
181.9
-
-
... More
Providing and fixing in position aluminium fixed window fully glazed of any size as per detailed drawing and as directed by Engineerincharge with all necessary alluminium sections including necessary fixtures and fastening such as 5mm thick clear float glass etc. complete. Note While arriving at the rate of item of item weight at 6.90 Kilogram/square metre is considered. :: b) Powder Coated (Item No. 39.52b)
216.8
-
-
... More
Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete.(Lift upto 0.00 to 1.50m.) By Manual Means (Item No. 21.01)
15.8
-
-
... More
Providing dry/trap/granite/quartzite/gneiss rubble stone soling 15cm to 20cm thick including hand packing and compacting etc. complete. (Item No. 21.38)
2.1
-
-
... More
Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/granite/quartzite/gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 24.01)
0.8
-
-
... More
Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/granite/quartzite/gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including Steel centering formwork, cover blocks laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 25.15)
1.8
-
-
... More
Filling in plinth and floors with approved excavated material in 15cm. to 20cm. Layers including watering and compacting etc. complete. (Item No. 21.36)
27.7
-
-
... More
Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/granite/quartzite/gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 25.54)
2.9
-
-
... More
Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/granite/quartzite/gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 25.35)
4.4
-
-
... More
Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. (Item No. 26.33)
4
-
-
... More
Providing second class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete (Item No. 27.05)
28.9
-
-
... More
Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. (Item No. 32.11)
702
-
-
... More
Providing and applying priming coat on concrete/masonary/Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. (Item No. 35.21)
702
-
-
... More
Providing and applying three coats of water proof cement paint of approved manufacture and of approved colour to new plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. (Item No. 35.15)
702
-
-
... More
Providing and erecting Y type barbed wire fencing with seven rows of wire with 2.45mm dia G.I. pipe(Rezan/concentiDeleted ire 0.75mm dia) with hot dip and G.I. coated hooks as per drawing supported on M.S. angle 50 x 50 x 6mm at 2.5 mtr. c/c including fixing and fastening with wire, painting M.S. angles with one coat of red lead primer and two coat of oil paint etc. complete. (Item No. 40.05)
117
-
-
... More
Providing & Fixing in position, Acoustical Panelling made from Wood-wool board 20mm on, 50 x 50mm Sal-wood frame of 600 x 600 c to c having wooden supports from wall of required length, in front of 1000 Gsm synthetic wool 50mm thick with chicken mesh on wall side, including cost of required Cut-Outs, decorative mouldings/finishing-items/paint & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects. including all materials labour, finishing etc complete.(NRC value should be more than 0.9) (Item No. 51.02, First Floor)
291.5
-
-
... More
Providing & Fixing in position Acoustical Doors along with 150 x 150mm teak wood frame, doors made from 50mm Teak wood frame 600 x600 c to c filled with 1000 Gsm synthetic wool 50mm thick and 3mm Tecsound from both sides, 12mm waterproof ply & veneer from both sides, including 150mm heavy duty SS hinges(Geze/Dorma or eq.) 4 no Nos leaf, with Door-closer(Dorma/Geze or eq.) including cost of required Cut-Outs, decorative mouldings/finishing-items/melamine polish & Scaffolding as per Architectural & Acoustical Design & Instructions & Complete in all aspects .including all materials labour, finishing etc complete (Item No. 51.05)
14.4
-
-
... More
Providing and Fixing Soft Fibre Acoustical Suspended Ceiling System with Optra(Bevelled Tegular) Edge Tiles of size 15mm Exposed Grid. The tiles should have Humidity Resistance(RH) of 95%, NRC 0.9-1.0, Light Reflectance ?85%, Colour White, Fire Performance UK Class 0/Class 1(BS 476 pt-6 &7) in module size of 600 x 600 x 15mm, suitable for Green Building application, with Recycled content of 66% GW and 74% RW. The tile shall be laid on precoated G.I channel 32 with 15mm wide T-section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200mm and 600mm Cross Tees with a web height of 32mm and a load carrying capacity of 7 Kilograms/M2 with a minimum pull out strength of 100 Kilograms. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system The Tile and Grid system used together should carry a 10 year warranty. products approved as per GRIHA and BS 476 etc. complete. (Item No. 38.47)
1310.4
-
-
... More
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150mm in thickness. (Item No. 2.09)
3426.4
-
-
... More
Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. (Item No. 2.11)
1027.9
-
-
... More
Excavation for roadway in hard murum and boulder including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m.and spreading for embankment or stacking as directed. (Item No. 2.13)
1027.9
-
-
... More
Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader/Paver on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- By Mix in Place Method and Grading-I Material (Item No. 3.04)
804.1
-
-
... More
Wet Mix Macadam -- Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub-base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Laying By Grader/Paver. (Item No. 3.23)
603.1
-
-
... More
Providing and constructing 75mm. thick Modified Penetraction Macadam(MPM) road surface including all materials, preparing the existing road surface, spreading 40mm. stone layers metal 100% crusher broken metal with conical crusher plant, heating and spraying the bitumen of specified grade @ 2kg/Square Metre, spreading 12mm.size chips compacting with three wheel static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc.complete, including applying tack coat of specified grade of bitumen at the rate of 0.30 Kg Square Metre. on existing bitumen surface.(VG-30 bulk bitumen rates are considered to arrive at rates) (Item No. 3.36b)
3426.4
-
-
... More
DENSE BITUMINOUS MACADAM: Proving and laying dense bituminous macadam using crushed aggregates of Grading 1, premixed with bituminous binder of specified grade of Bitumen @ 4.50 per cent by weight of total mix and filler, transported to site with VTS, laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired density for 76-100mm compacted thickness .USING Batch mix type hot mix plant with SCADA, Sensor Paver, Vibratory roller with Stone Dust filler.(VG-30 bulk bitumen rates are considered to arrive at rates) (Item No. 3.44)
205.6
-
-
... More
BITUMINOUS CONCRETE:-Providing and laying bituminous concrete using crushed aggregates of grading 1, premixed with bituminous binder @ 5.20 per cent by weight of total mix and filler, transported to site with VTS, laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction for 50mm compacted thickness with specified grade of Bitumen, Excluding prime/tack coat. For Bitumen of specified grade -- USING Batch mix type hot mix plant with SCADA, Sensor Paver, Vibratory roller with Stone Dust filler.(VG-30 bulk bitumen rates are considered to arrive at rates) (Item No. 3.48)
102.8
-
-
... More
Prime coat-Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including cleaning of road surface and spraying, primer at the rate of 0.60kg/Square Metre using mechanical means. (Item No. 3.29)
3426.4
-
-
... More
Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen set footed in bitumen boller on B.T. surface 2.5kg/10Square Metre.(VG-30 bulk bitumen rates are considered to arrive at rates) (Item No. 3.30)
3426.4
-
-
... More
Providing and laying in-situ M30 Grade unreinforced plain cement concrete pavement over a prepared sub base with 43 grade cement, coarse and fine aggregate(natural sand/VSI grade finely washed crushed sand) conforming to IS 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a batching and mixing plant/non tilting mixer and Weigh batcher as per approved mix design, admixtures, transporting to site, spreading, laying with approved make paver, compacted and finished in a continuous operation, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound/by providing cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80mm at bottom and 40mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-in-charge. with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. (Item No. 5.01)
202
-
-
... More
Providing and laying in situ/ready mix cement concrete of M-10 proportion with trap/granite/quartzite/gneiss metal in foundation including necessary form work, compacting and curing etc. complete.(with reversible drum type mixer with SCADA with fine agreegates of required specifications(Natural sand/VSI sand finely washed etc) (Item No. 11.02)
20.6
-
-
... More
Providing and casting in situ or precast tapering R.C.C. M-20 Semi Barrier type Kerb without gutter(as per IRC 86 1983) embedded 125mm below ground level over M-10 PCC finished neatly with C.M. 1:2, setting the same in C.M. 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant (Item No. 7.02)
1028.2
-
-
... More
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150mm in thickness. (Item No. 2.09)
1025.5
-
-
... More
Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. (Item No. 2.11)
181.7
-
-
... More
Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/granite/quartzite/gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 24.01)
155.7
-
-
... More
Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. (Item No. 33.06)
204.4
-
-
... More
Providing and fixing in required position skirting or dado of polished Kotah Stone slab 25mm to 30mm thick fixed on base on plaster of cement mortar 1:4 including cement float, filling joints with cement slurry, curing rubbing, polishing and cleaning complete. (Item No. 33.81)
186.1
-
-
... More
Providing and fixing heavy duty inter locking concrete Grey paving blocks of 60mm thickness of having a strength of 300 Kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30mm thick including skirting joints and cleaning etc. complete. (Item No. 33.49)
924.2
-
-
... More
Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete.(Lift upto 1.5m.) By Mechanical Means (Item No. 21.02)
156.6
-
-
... More
Excavation for foundation in hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete.(Lift from 1.5 to 3.0m) By Manual Means (Item No. 21.07)
121.3
-
-
... More
Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/granite/quartzite/gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork, cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided(Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 25.13)
132.5
-
-
... More
Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/granite/quartzite/gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 26.19)
313.4
-
-
... More
Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/granite/quartzite/gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 25.33)
3.9
-
-
... More
Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/granite/quartzite/gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 25.52)
8.7
-
-
... More
Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/granite/quartzite/gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 25.72)
4.4
-
-
... More
Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185(Part 3)-1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete.(The test shall be carried out conforming to IS:6441(Part I)-1972) (Item No. 27.15)
23.4
-
-
... More
Providing and applying gypsum plaster(with Gypsum material) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface/or on newly brick surface(Excluding rough cast plaster) in all position including preparing and Finishing the surface scaffolding etc.complete. (Item No. 32.31)
98.6
-
-
... More
Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. (Item No. 32.11)
108.8
-
-
... More
Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. (Item No. 32.34)
98.6
-
-
... More
Providing and applying priming coat on concrete/masonary/Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. (Item No. 35.21)
197.2
-
-
... More
Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces.(excluding the primer coat.) etc. complete. (Item No. 36.11)
197.2
-
-
... More
Providing and laying vitrified mirror/glossy finish tiles decorative type having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS. 15622-2006(group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. (Item No. 33.40)
35.3
-
-
... More
Providing and laying vitrified mirror/glossy finish tiles having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS. 15622-2006(group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete (Item No. 33.41)
3.5
-
-
... More
Providing and fixing solid core flush door shutter in single leaf 32mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. (Item No. 39.09)
5.4
-
-
... More
Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. (Item No. 23.01)
10.6
-
-
... More
Providing and fixing polycarbonate sheet to walkway including all necessary fittings, etc complete.
352
-
-
... More
Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
110
-
-
... More
Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
68
-
-
... More
Supplying, erecting & marking DP MCB 40A to 63A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB
5
-
-
... More
Supplying, erecting & marking TPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
14
-
-
... More
Supplying, erecting & marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
2
-
-
... More
Supplying & erecting triple pole and neutral distribution board (TPNDB),SPMCB of 8 ways / phase (24 poles), with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) asper specification no. SW-SWR/MCBDB
15
-
-
... More
Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 12 ways /36 poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB
3
-
-
... More
Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB
3
-
-
... More
Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB
8
-
-
... More
Supplying and erecting blanking plate of suitable size on MCBDB.
20
-
-
... More
Supplying, erecting & commissioning 2 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB
42
-
-
... More
Supplying, erecting & commissioning 2 pole RCCB40A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB
8
-
-
... More
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½core 240 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
210
-
-
... More
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 95 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
90
-
-
... More
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 35 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
35
-
-
... More
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3½ core 25 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
65
-
-
... More
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
350
-
-
... More
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
350
-
-
... More
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
30
-
-
... More
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
410
-
-
... More
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
160
-
-
... More
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
45
-
-
... More
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
20
-
-
... More
Supplying and erecting PVC box trunking of size 100x50 mm. with accessories on wall/ceiling as per specification No: WG-MA/BOX
210
-
-
... More
Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.
910
-
-
... More
Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.
1169
-
-
... More
Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW
3460
-
-
... More
Supplying and erecting mains with 1x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW (NOTE 3)
3460
-
-
... More
Supplying and erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places.as per specification No: WG-MA/BW
385
-
-
... More
Supplying and erecting mains with 1x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places.as per specification No: WG-MA/BW (NOTE 3)
385
-
-
... More
Supplying and erecting mains with 3x10 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW
20
-
-
... More
Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.
227
-
-
... More
Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete.
66
-
-
... More
Supplying and erecting modular type switch 16 / 20 A with indicator, duly erected on provided plate and box with wiring connections complete
15
-
-
... More
Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete
227
-
-
... More
Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.
72
-
-
... More
Supplying and erecting modular type blanking plate one module, duly erected on provided plate & box.
25
-
-
... More
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
6
-
-
... More
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the
background.
172
-
-
... More
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 4 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the
background.
121
-
-
... More
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the
background.
5
-
-
... More
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 8 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match thebackground
5
-
-
... More
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
2
-
-
... More
Point wiring for light/bell concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WGPW/CW
187
-
-
... More
Point wiring for ceiling fan concealed type in min 20 mm HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification no. WG-PW/CW
107
-
-
... More
Secondary point wiring for additional light/ bell point, concealed type in min 20 mm FRLS grade PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires with required accessories as per specification No: WG-PW/CW
271
-
-
... More
Wiring for plug on board with Switch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification No: WG-PW/CW
20
-
-
... More
Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 770 Lumens, min. efficacy of 110 lumen/W, CRI80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.
6
-
-
... More
Supplying and erecting anodized aluminium corridor / passage / mirror light LED fitting (2 feet) Max. 12W with high transitivity diffuser with min. system lumens output of 1200 lumens, min. efficacy of 100 lumen/W, CRI80, CCT upto 6000K, Beam Angle of 110 deg., Ripple5%, THD10%, p.f. 0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver with end caps on provided PVC Block / wooden board with 3 years warranty. (Mirror)
12
-
-
... More
Supplying and erecting Electronic type cordless call bell erected on T.W. board having portable bell push working on 9V D.C. battery and (effective range upto 45 meter) bell on 250 V A.C. supply.
8
-
-
... More
Supplying and erecting anodized aluminium corridor / passage light LED fitting (4 feet) Max. 22W with high transitivity diffuser with system lumens output of Min.2200 lumens , min. efficacy of 100 lumen/W, CRI80, CCT upto 6000K, Beam Angle of 110 deg., Ripple0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty. (36*4 + 18*2 = 180) - 20 Emergency = 160 Nos
160
-
-
... More
Supplying and erecting LED square / circular Max. 14 W down lighter / Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1500 Lumens, min. efficacy of 110 lumen/W, CRI80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD10%, p.f. 0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED.
166
-
-
... More
Supplying and erecting LED Panel Light(600mm X 600mm) Max. 30 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min. 3600 Lumens, min. efficacy of 120 lumen/W, CRI80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty (48+22=70)
70
-
-
... More
Supplying and erecting LED Strip light 5m Length Max. 45 W IP20 class having minimum lumens output of 800 Lumens/m, min. efficacy of 90 lumen/W, CRI80, CCT upto 5000K, Beam Angle of 110 deg., THD10%, p.f.0.95, operating range of 230-270V, Life class of 30,000 Hrs. at L70B50, including driver/SMPS 120W, Housing material - Aluminium LLS-12WFT 50mmx70mm Led Light Fixtures ( 12 foot ) EMPTY with suspension Kit, with 1 year warranty
5
-
-
... More
Supplying & erecting inverter LED batten 20W tube light fitting with polycarbonate housing, heat sink, integrated HF electronic driver, Min. 2600 mAh Lithium ion Battery with charging time of 8-10 Hours and backup time of Min. 3 hrs. with minimum 25% of initial Watts having luminous efficacy of 100 lumen/watt, CRI80, CCT of 6500K and THD=20% having useful life of
minimum 25000 hrs. with overheating protection with 2 years warranty. (10 Emergency Lights in all lecture hall + 4 Ele X 3 Fl+4 ELV Room X 3 Fl)
44
-
-
... More
Supplying and erecting integrated LED flood light fitting Max. 50W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 5000 Lumens, min. efficacy of 100 lumen/W, CRI70, CCT upto 6500K, THD10%, p.f. 0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs at L70B50 including driver with U shaped bracket with minimum 2 Years warranty as per specification No. FG-ODF/FL.
1
-
-
... More
Ceiling fan with Auto ON OFF Function, 3200CMH, 88X20MM Copper Motor, 3 ABS Blade, 3 Speed with Remote Control 2'X2' size with all axxessoreis for installation complete.((6+6+4) 16X3 Fl)
48
-
-
... More
Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to the R.C.C. bars upto 50 mm length Nos side and pierced through a 16 S.W.G. thick aluminium/M.S. Bowl 100 mm dia. or equivalent square size and having depth upto 75 mm complete erected with duly painted by one coat of red oxide paint and two coats of paint erected in position and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level of the slab.
5
-
-
... More
Supplying and erecting ‘B’ class G.I .pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire.
5
-
-
... More
Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, max. energy consumption of 28W having service ratio (CMM/W) of Min. 8 , PF0.9, THD
15
-
-
... More
Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‘E’ class insulation.
12
-
-
... More
Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 200 mm width & 75 mm height complete with necessary coupler plates & hardware.
20
-
-
... More
Supplying,erecting, testing & commisioning of 10 kVA capacity on line pure sine wave,PWM,IGBT based UPS with 0.9 to unity output pf ,3 phase input &3 phase output complete with all protections as per specification no. AP-UPS (Without batteries)
1
-
-
... More
Supplying and erecting 12V/42Ah SMF battery with battery terminal wire, duly charged with 24 months warranty complete for 30 minutes.
30
-
-
... More
Supplying & laying (including excavation) reinforced cement concrete pipe of NP-2 class of 250 mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.
280
-
-
... More
ProvidingandconstructingBrickMasonryInspectionChamber60cmx45cmx90cmincluding1:4:8cementconcretefoundation1:2:4cementconcretechannelshalfroundG.S.W.pipes,BrickMasonry,plasteringfrominsideandwithframefixedincement concrete with R.C.C. Cover medium duty 140Kilogramwith frame etc complete.
24
-
-
... More
Supplying and erecting LED Strip light 5m Length Max. 60 W/12W/Mtr IP20 class having minimum lumens output of 800 Lumens/m, min. efficacy of 90 lumen/W, CRI80, CCT upto 5000K, Beam Angle of 110 deg., THD10%, p.f.0.95, operating range of 230-270V, Life class of 30,000 Hrs. at L70B50, including driver/SMPS 120W, Housing material - Aluminium LLS-12WFT 50mmx70mm Led Light Fixtures ( 12 foot ) EMPTY with suspension Kit, HOUSING with 1 year warranty Min. 2600 mAh Lithium ion Battery with charging time of 8-10 Hours and backup time of Min. 3 hrs.
1
-
-
... More
Supplying and erecting LED square / circular Max. 14 W down lighter / Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1500 Lumens, min. efficacy of 110 lumen/W, CRI80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD10%, p.f. 0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED.
Min. 2600 mAh Lithium ion Battery with charging time of 8-10 Hours and backup time of Min. 3 hrs.
(4 X 3 Fl = 12 + 8 on Last Fl = 20)
20
-
-
... More
Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame.
2
-
-
... More
Supplying, installation and testing of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete, and recording the results Specification no. EA-MOBI
8
-
-
... More
Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation complete.
7
-
-
... More
Supplying and erecting annealed bare copper wire of high purity of required sizes used for earthing on wall with necessary copper clamps fixed on wall/cable/conduit with screws complete.
80
-
-
... More
Acedemic Building Main Panel
Duty -Duty: Indoor Type (IP 42)
Incomer-1 Nos of 400A FP LSIG Microprocesor based MCCB with aux contacts, ON, OFF, TRIP Indicators, Multifunction Dual Source Meter. RTPFC Sensing.
Busbar - 400A TPN Al Busbar Outgoings - 1 Nos 200A FP MCCB, 4 Nos of 125A FP MCCB, 2 Nos 63A FP MCB, 1 Nos 40A FP MCB, 2 Nos 32A FP MCB,
2 Nos 25A FP MCB, 2 Nos 10A SP MCB, SPD Class I+II
1
-
-
... More
Academic Building Floor Panel
Duty -Duty: Indoor Type (IP 42)
Incomer-1 Nos of 125A FP LSIG Microprocesor based MCCB with aux contacts, ON, OFF, TRIP Indicators, Multifunction Dual Source Meter.
Busbar - 125A TPN Al Busbar Outgoings - 7 Nos 25A FP MCB, 5 Nos of 40A FP MCB,
3
-
-
... More
SITC of Electric Traction Passenger Lift with · Rated capacity :- 13 Passenger884Kg · Floors :- G+2 floor (3 Stops/3 Landings) · Travel :- 14 mtrs · Location of Lift Machine:- MR/MRL · Rated speed :- 1.0mps VS
· Car/Landing door clear opening of 900 mm wide x 2000 mm high
· Clear Car size of 1300 mm wide x 1350 mm deep x 2250mm high
· Lift shaft available having clear size of 2600mm wide x 1900mm deep, pit depth-1500mm, Overhead height -4500mm
· Doors type :- COPO/TOPO Doors with frame made from SS 304 grade solid(non-cladded) sheet of 1.5mm thick in hairline finish for car and all landing doors with SS door architraves/frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory).
· Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. The lift car interior design shall be done as per the directions of engineer in charge..
· COP with SS face plate having metallic push buttons with Braille code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with / without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor.
• Clear Car size of 1300 mm wide x 1100 .mm deep x2000 .mm high · LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings.
· Lift controller of simplex full collective based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port. The controller shall have necessary protections such as overcurrent, overvoltage, over speed, overheat for all devices including lift motor and travel direction protection, protection for phase loss at input or output etc. ,various operation modes such as maintenance, change direction by attendant, full load bypass, VIP call operation, self levelling operation, call cancel facility, auto return to home landing, fireman evacuation operation, earthquake operation, door open/close operation from COP etc. The system can record information for minimum 30 latest faults, with real-time clock management and handheld keypad with LCD screen for view and setting of parameters, The control panel duly wired with proper size & strength, copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class.
· ARD complete with necessary SMF VRLA batteries.
· Fireman controller having fireman switch at fire Landing. · CCTV surveillance system comprises of 2nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for min. 90 days with min. 20" FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge.
· Lift Machine of Gearless PMSM of suitable kW with duty cycle of minimum 120 starts/hr (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory), with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength.
· Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work.
· Minor civil work such as alteration work if any necessary for erection of landing door frames and it's accessories e.g. sill, header, hole pass etc complete with plaster finish, civil work for erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails, providing and fixing steel girders/RCC work having adequate strength for mounting and hoisting lift machine etc. complete as per specification no. LFT.
· General: - Job includes entire procedure of obtaining all necessary erection permissions & "License to Work the Lift" from Electrical Inspector(Lifts) with submission to the Engineer In Charge. · The above rate includes Fully Comprehensive AMC for one year from the date of commissioning.
A1 -For Lift having 900mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade solid(non-cladded) landing door [Two panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows-indicators, extension of guide rails, shaft wiring with trunking, travelling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete. ( 1386712+( 141837 x 1)=1528549)
2
-
-
... More
ITC of Duplex Lift control system for two nos. microprocessor/PLC based simplex lift controllers along with necessary software with programming and hardware e.g. logic board, necessary communication/control/data cabling laying in rigid PVC conduits/trunking etc. complete.
1
-
-
... More
Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW
100
-
-
... More
Supplying and erecting mains with 1x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW
100
-
-
... More
Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.
8
-
-
... More
Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete.
8
-
-
... More
Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.
8
-
-
... More
Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.
8
-
-
... More
Supplying and erecting PVC Surface modular switch box with double mounting plate for 6 module duly erected.
8
-
-
... More
Supplying and erecting modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.
2
-
-
... More
Wiring for plug on board with Switch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification No: WG-PW/CW
2
-
-
... More
Point wiring for ceiling fan concealed type in min 20 mm HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification no. WG-PW/CW
2
-
-
... More
Point wiring for light/bell concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WGPW/CW
4
-
-
... More
Supplying and erecting bulk head LED fitting max. 10W with high transitivity diffuser with system lumens output of min. 1100 lumens, min. efficacy of 110 lumen/W, CRI80, CCT upto 6500K, Beam Angle of 120 deg., THD10%, p.f. 0.95, operating range of 140-260V, in built surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, IP66, IK09 rated on provided PVC Block / wooden board with 3 years warranty.
8
-
-
... More
Supplying and erecting CRCA powder coated corridor/passage light LED fitting (4 feet) Max. 17W with high transitivity diffuser with system lumens output of Min. 2000 lumens , min. efficacy of 120 lumen/W, CRI80, CCT upto 6500K, Beam Angle of 120 deg., Ripple5%, THD10%, p.f. 0.95, operating range of 120-270V, surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty.
4
-
-
... More
Providing recess in brick wall suitable for erection of exhaust fan up to 450mm. sweep complete with grouting of nut, bolts, plastering and colour washing to match the colour of the wall for the wall thickness of 225 mm.
2
-
-
... More
Supplying & erecting 22 SWG G.I sheet metal cawl sector shaped with 25 x 25 x 3 (mm) angle iron frame, metal mesh to avoid birds entry with necessary material, suitable for exhaust fan of 300 mm as per specification no FG-FAS/MSC
2
-
-
... More
Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‘E’ class insulation.
2
-
-
... More
Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, max. energy consumption of 28W having service ratio (CMM/W) of Min. 8 , PF0.9, THD10% with IR remote control/compatible speed regulator, Temperature Rise of Max. 40 deg. C, having external mounted control PCB completely erected in position as per specification no. FG-FN/CF
2
-
-
... More
Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
6
-
-
... More
Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
6
-
-
... More
Supplying, erecting & commissioning 2 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB
1
-
-
... More
Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB
1
-
-
... More
Supplying, erecting & commissioning 4 pole RCCB 63A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB
1
-
-
... More
Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame.
1
-
-
... More
Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.
60
-
-
... More
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
100
-
-
... More
Supplying & erecting G.I. pipe ‘A’ class 40 mm dia. erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE
6
-
-
... More
Supplying, installation and testing of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete, and recording the results Specification no. EA-MOBI
8
-
-
... More
Supplying and erecting annealed bare copper wire of high purity of required sizes used for earthing on wall with necessary copper clamps fixed on wall/cable/conduit with screws complete.
40
-
-
... More
Providing & erecting 1.2 m high (clear height) street light type post or Bollard made of AISI 316L stainless steel available in 60 cm and 90 cm heights. Pole head with 3 LEDs. 21°, 45° or 65° optics in 2700K, 3000K and 4000K. Flush black silk-screened extra-clear tempered glass 4 mm thick. Integrated power supply. Flange with anchor bolts for installation in concrete. Surface finish with Natural, Graphite, Bronze coloring.
35
-
-
... More
Supplying and erecting integrated LED Bollard Cylindrical / Cubical shaped 800mm 8W IP65 & IK10 class having extrusion aluminium housing with polycarbonate diffuser, having system lumens output of Min. 800 Lumens, min. efficacy of 100 lumen/W, CRI80, CCT upto 6500K, THD10%, p.f. 0.90, operating range of 140-240V, inbuilt surge protection of 2 kV, Life class of 25,000 Hrs. at L50B50, including driver complete with minimum 2 Year warranty as per specification No FG-ODF/BL.
30
-
-
... More
Supplying LED concealed type foot / step light with aluminium body for indoor/outdoor application suitable for 4W-6W LED including driver and erecting by making necessary arrangement / recess in wall to make it flush with surface with 1 year warranty.
20
-
-
... More
Supplying and erecting integrated LED Post Top 45W IP65 & IK10 class having die cast aluminium housing with UV protected polycarbonate diffuser, having system lumens output of Min.4500 Lumens, min. efficacy of 100 lumen/W, CRI80, CCT upto 6500K, THD0.90, operating range of 140-240V, inbuilt surge protection of 2 kV, Life class of 30,000 Hrs. at L50B50 , including driver complete with 2 Year warranty as per specification No FGODF/FLS2
20
-
-
... More
Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole).
35
-
-
... More
Supplying & erecting three phase, 415V, street light control panel up to the max load of 6kW, TPN MCB 40A, powder coated CRCA 14 SWG sheet, outdoor type, having IP54,IK10 protection, suitable rating contactor, 24 hrs. astronomical time switch with minimum 5 years battery back up, auto/manual selector switch, ON/OFF push buttons, indicator lamps, control wiring, metering device, etc. for automatic operation, with overcurrent, short circuit, earth fault protection on provided iron frame / CC foundation.
1
-
-
... More
Supplying and erecting PVC insulated PVC round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multistra nded copper Industrial cable for voltage grade up to 1.1 kV ( 35 Poles x 1.2 mtr = 42 m )
45
-
-
... More
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in
provided trench/ pipe as per specification no. CB-LT/CU
650
-
-
... More
Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP
35
-
-
... More
Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.
650
-
-
... More
Supplying, erecting & marking SPMCB 0.5A to 5A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
35
-
-
... More
Supplying & erecting HMS PVC conduit 25mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification no. WG-MA/CC. (42 data Points X 2 Mtr = 84)
84
-
-
... More
Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC. ( 175 for CCTV + 200 For Speaker)
375
-
-
... More
Supplying and erecting 25 mm dia. corrugated flexible polypropylene conduit
30
-
-
... More
Supplying and erecting PVC box trunking of size 50x16/20 mm. with
accessories on wall/ceiling as per specification No: WG-MA/BOX.
228
-
-
... More
Supplying and erecting modular type T.V. socket single outlet, duly erected on provided plate and box with wiring connections complete.
10
-
-
... More
Supplying and erecting modular type telephone socket one gang with safety shutter, duly erected on provided plate and box with wiring connections complete. ( 3 in Hall + 1 Rec + 2 Sec + 3 in hall + 1 Rec + 2 in Hall + 1 Rec)
13
-
-
... More
Supplying and erecting modular type blanking plate one module, duly erected on provided plate & box.
13
-
-
... More
Supplying, erecting & terminating 2 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, nylon rip cord & grey colour sheathed with FR PVC, confirming to ITD specification S/WS 113C laid in provided PVC casing-n-capping/conduit as per specification no. WG-TW
480
-
-
... More
Supplying, erecting & terminating 20 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, nylon rip cord & grey colour sheathed with FR PVC, confirming to ITD specification S/WS 113C laid in provided PVC casing-n-capping/conduit as per specification no. WG-TW (From residential to Academic Bldg)
160
-
-
... More
Supplying & erecting 0.5 mm dia, copper jumper wire as per specification No. WG-TW
20
-
-
... More
Supplying, erecting & commissioning 20 pairs FR junction box with moulded plastic enclosure as per specification no. WG-TW
1
-
-
... More
Supplying and installing cat-6 cable suitable for networking as per specification no. WG-COC/NC (538 for Data Point )
538
-
-
... More
Supplying and fixing tool-less IO (ethernet) flush/surface type in provided modular box as per specification no. WG-NAS/IO
42
-
-
... More
Supplying and installing armoured single mode optical fibre cable with 6 fiber, core dia 50/125μm (OS1/OS2) 10/40 GBPS speed in provided underground HDPE pipe complete.
160
-
-
... More
Supplying and plugging 3 m fibre patch cord LC-SC MM (50) OM3 LSZH
duplex complete as per specification no. WG-COC/FPC
2
-
-
... More
Supplying, fixing, and configuring 10G Base -SR (SFP+) simplex MM
transceiver erected in provided rack complete.
2
-
-
... More
Supplying and fixing 12 ports light guide unloaded interconnect unit,rack mounted type, with adapter panel for termination of optical fibre cables in provided U rack complete as per specification no. WG-NAS/ LIU
2
-
-
... More
Supplying and fixing SC/LC type multimode pigtails (OM3) for LIU to
terminate OFC in LIU as per specification No. WG-NAS/LIU2
12
-
-
... More
Supply Installation, testing & commissining of 2MP Analog HD Dome type Camera, 2.8 mm Fixed lens, IR-20mtr with power supply adaptor & required accessories.
6
-
-
... More
Supply Installation, testing & commissining of 2MP Analog HD Bullet type Camera, 2.8 mm Fixed lens, IR-20mtr with power supply adaptor & required accessories.
9
-
-
... More
Supply Installation, testing & commissining of 32 Channel, 1080P HD DVR (Digital Video Recorder), Auto Adaptive HDCVI/AHD/TVI/CVBS/IP signals, Max 128Mbps Incoming Bandwidth, H.264+ / H.264 dual-stream video compression, HDMI / VGA Simultaneous Video Output, Support 2 SATA HDD up to 16TB, 2 USB Ports, with required accessories.
1
-
-
... More
Supplying, erecting & terminating co-axial copper cable low voltage grade tri-shielded RG-11 as per specification no. WG-TW for CCTV
175
-
-
... More
Supplying, erecting & terminating 3 m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19pin HDMI connectors complete. For CCTV Screen
1
-
-
... More
Supplying & erecting of BNC Connector with required accessories.
26
-
-
... More
Supply Installation, testing & commissining of 12VDC/5A SMPS Power supply for Camera
2
-
-
... More
Supplying, erecting, testing and commissioning of multistrand annealed bare copper conductor, PVC insulated 2C x 1.5 Square Metrem cable in provided trunking/conduit etc.
175
-
-
... More
Supplying & erecting 8 TB internal Surveillance HDD suitable for SATA Port of DVR/NVR, interface transfer rate 6 GB/S, maximum sustained transfer rate 210 MB/Sec to 213 MB/S. Drive bay supported 08+, Cameras supported up to 64, Cache (MB) 256, Load/Unload Cycle -3000000, Work Load Rating per Year 180TB, MTBF 1000000 Hrs. HTTPS. RoHS, UL, CE certified, duly erected in position in provided NVR as per specification no. CCTV-HDD
2
-
-
... More
Supplying & erecting 32" professional LED Monitor with 1920*1080 (Full HD) Display, suitable for 16 channel NVR and following features
Brightness: minimum 250 Cd/m2
Contrast Ratio: minimum 1000:1
Viewing angle: 178/178 deg.
Response time: maximum 8 ms
Inputs: HDMI, VGA, BNC, USB, Audio In, Built-in speakers maximum 2 W, Suitable to operate on 100-240 V 50 Hz AC supply and 24/7 Duty Cycle duly erected on wall or table top with standard accessories like wall mount stand and wiring connections etc. complete as per specifications no. CCTV-MON
1
-
-
... More
Supplying, erecting testing and commissioning manual call point (Pill box) with break glass, push button (resettable type) in metal enclosure complete as per specification no. FF-FAAS/MCP
18
-
-
... More
Supplying, erecting, testing and commissioning hooters having high (100dB @
1m) and low (94dB @ 1m) volume setting, group addressing facility allowing
multiple sounders to be activated with CRCA enclosure complete as per
specification no. FF-FAAS/HTR
18
-
-
... More
Supplying, installing, testing and commissioning FR, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU
480
-
-
... More
Supplying, installing, testing and commissioning 8 Zone, local signal conventional control panel (LCP) with standard accessories complete as per specification no. FF-FAAS/LCP
1
-
-
... More
Academic section : Supplying, installing, testing and commissioning 5 Star split type variable speed Inverter technology room Air conditioning unit 1.0 TR capacity having minimum ISEER value of 5.4, suitable to operate on 250V, 50 cycles, A.C. supply having 1 no of air handling unit Hi wall (throw shall be upto 16m with wide coverage area) / floor mounting type complete with refrigerant R410A / R32 and copper condenser and evaporators at position with smart control facility using Wifi on Mobile/Tablet/PC.
Daikin FTKF35UV
32
-
-
... More
Supply and Installation of powder coated bracket stand (wall mounted / floor mounted / ceiling hung type) suitable for 1.0 TR split ac in appropriate manner with all required accessories complete as directed by Engineer in charge. includes new Copper piping with nitrile rubber Insulation, Drain piping in hard PVC with all fittings, supports and clamp, up to 3 mtr. lengths and extra copper piping and PVC drain pipe as per below mentioned items with all required accessories and drilling in walls complete. AC unit shall also be included copper flexible wire of 1.5 Square Metrem 4 core between IDU and ODU.
32
-
-
... More
Supply and Installation of copper piping (3/8"for suction and 1/4"discharge) of appropriate size in appropriate manner suitable for machines provided with all required accessories complete as directed by Engineer in charge.
250
-
-
... More
Supply and Installation hard PVC drain pipe of appropriate size in appropriate manner suitable for machines provided with all required accessories complete as directed by Engineer in charge. Pipe Dia.25mm with 6mm nitril rubberclass O insulation.
350
-
-
... More
Supplying, installing, testing and commissioning of ONLY Ductable unit of capacity 11.0TR for the available at site fix speed "CARRIER" make ODU ( Model No. 38LH-132GSC ) with washable Pre filter, R410A gas and drier, expansion valve, etc. By making ODU good condition if required by contractor. (ODU's are available at site for inspection before quote submission)
8
-
-
... More
Supplying, installing, testing and commissioning of Cu piping (1 1/8"for suction and 5/8"discharge) for above mentioned Carrier make IDU and ODU of appropriate size with insulation and support system. ( For 11TR fix speed AC system)
80
-
-
... More
Supplying, installing, testing and commissioning of Cu piping (7/8"for suction and 3/8"discharge) for above mentioned Carrier make IDU and ODU of appropriate size with insulation and support system. ( For 8.5TR Inverter AC system)
33
-
-
... More
Supplying, installing, testing and commissioning of AC Ducting made out of 24G G.S.S. Sheets of having coating of 180GSM, factory fabricated only. Installed with necessary supporting system.
271
-
-
... More
Supplying, installing, testing and commissioning of Class 'O' Nitril rubber insualtion of 19mm thickness for ducting.
270
-
-
... More
Supplying, installing, testing and commissioning of acoustic insulation for air ducts with 25mm thick, 48 kg/cu.m fiber glass faced with RP tissue and covered with 26 SWG perforated aluminium sheets complete
200
-
-
... More
Supplying, installing, testing and commissioning of Aluminium powder coated grilles of height 200mm and length 700mm, with 15 deg. angle all 4 side flanges with al VCD mounted.
74
-
-
... More
Supplying, installing, testing and commissioning of Flexible canvass connection of 11.0 TR / 8.5 TR IDU.
10
-
-
... More
Supplying, installing, testing and commissioning of Fresh Air System Inline Cabinet fans 600 CFM x 5 mm SP with washable pre filters complete with electric motor, drive mechanism, mounting isolaters, etc. ( Sound level max 60 dBA from 1m) .
7
-
-
... More
Supplying, installing, testing and commissioning of Fresh Air System Inline Cabinet fans 400 CFM x 5 mm SP with washable pre filters complete with electric motor, drive mechanism, mounting isolaters, etc. ( Sound level max 60 dBA from 1m) .
2
-
-
... More
Supply and Installation of powder coated bracket stand (ceiling hung type) suitable for cabinet fan in appropriate manner with all required accessories complete as directed by Engineer in charge.
9
-
-
... More
Supply and Installation of ODU stand ( floor mounted type) suitable for 11 TR ductable ODU made of MS Channel 50x50x6mm HDGI coated in appropriate manner with all required accessories, (ODU size - 1200x600mm) (1stand = 22Kg )
10
-
-
... More
Supplying, installing, testing and commissioning of Inverter technology Ductable unit of capacity 8.5 TR with both IDU and ODU. The AC unit shall be comprising with washable Pre filter, R410A gas and drier, expansion valve, and required necessary accessaries, etc.
2
-
-
... More
Supplying, installing, testing and commissioning of Toilet Exhaust Air System Inline Circular fans 800 CFM x 15 mm SP ( Sound level max 60 dBA from 1m)
6
-
-
... More
Supplying, installing, testing and commissioning of Aluminium flexible pipes Dia. 100mm for Disc valve and ducting connection for toilet exhaust with necessary accessories as clamos, tapes, etc as shown on layouts.
48
-
-
... More
Supplying, installing, testing and commissioning of ABS material Disc Valves for Toilet Exhaust Air System of Dia. 125mm, as shown on layout.
96
-
-
... More
Supplying, installing, testing and commissioning of Toilet Exhaust Air Ducting made out of 24G G.S.S. Sheets of having coating of 180GSM, factory fabricated only. Installed with necessary supporting system.
150
-
-
... More
From second year to fifth year (4 years)
32
-
-
... More
From Sixth year to Tenth year (5 years)
32
-
-
... More
Supplying, installation, testing and commissioning of booster fire pump [BP] suitable for water discharge of 450 LPM at 35 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 5.5 kW or of suitable kW capacity for manual/automatic operation and consisting of following :(a) Horizontal/vertical type, single/multi stage, centrifugal casing pump of cast iron body & bronze/CI impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520.(b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.(c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.(d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/BP
1
-
-
... More
for 5.5/ 7.5 kW centrifugal type booster pump 1no (1working), add Rs…....
1
-
-
... More
Supplying & erecting D.O.L Starter suitable for 415 V, 3 phase 50 cycles with no volt coil and overload element with necessary materials and connected to supply up to 7.5 H.P.
1
-
-
... More
Supplying and erecting G.I. pipe ‘C’ class ERW 100 mm dia with necessary fittings complete as per specification no. FF-PP
140
-
-
... More
Supplying and erecting 100 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS
1
-
-
... More
Supplying and erecting 100 mm dia. cast iron double flange sluice valve complete with PN16 pressure rating, as per specification no. FF-VL/SV
1
-
-
... More
Supplying and erecting 100 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV
10
-
-
... More
Supplying and erecting 100 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV
1
-
-
... More
Supplying and erecting 25 mm dia gun metal gate valve complete with PN16 pressure rating, as per specification no. FF-VL/GV
10
-
-
... More
Supplying and erecting gun metal single outlet hydrant valve fitted with necessary accessories complete as per specification no. FF-VL/HV
12
-
-
... More
Supplying and installing wall mounting swinging hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (Polyhose) along with necessary accessories complete as per specification no. FF-FFA/HV
12
-
-
... More
Supplying and erecting 63mm dia, reinforced rubber lined (R.R.L.) hose pipe, 15m in length, fitted with necessary accessories complete as per specification no. FF-FFA/RRL
24
-
-
... More
Supplying and erecting stainless steel branch pipe 63 mm dia fitted with 20 mm dia detachable hexagonal nozzle complete as per specifications no. FF-FFA/NZ
12
-
-
... More
Supplying and erecting fire brigade header ( Siamese connection )of 150 mm dia, for supplying water in fire tank complete as per specification no. FF-FA/FMC
1
-
-
... More
Supplying and erecting 100 mm dia. pressure gauge , 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, erected with provided G.I. pipe, elbow etc. complete as per specification no. FF-FFA/PG
1
-
-
... More
Supplying and erecting 12/15 mm dia pressure switch with provided isolation valve, G.I. nipple, elbow, etc complete as per specification no. FF-FFA/PS
2
-
-
... More
Supplying and erecting M.S./CRCA cabinet for housing Fire Brigade / SIEMESE connections (size 1250 x 400 x 300 mm.) made from 16 SWG sheet and angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8" x 6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour( Code 538 of IS 5)
12
-
-
... More
Supplying, erecting, testing and commissioning vane type water flow detector 100 mm dia. with 1) Visual switch activation 2) Rugged switch assembly 3) Heavy duty aluminium pipe saddles 4)Durable metal enclosure 5) Steel U bolts for secure mounting 6) Two SPDT ( Single pole double track ) synchronised switches 7) serviceable without draining pipes.
1
-
-
... More
Supplying and erecting fire resistant mortar (20 kg) with fire resistance class S90 as per National Electrical Code (NEC) SP30-2011 suitable to seal the openings of all kinds of cables, pipes and cable support system in steel, aluminium and plastic profiles ( except hollow core conductors). The residual openings shall be closed with filler, as per specification no FF-FRM.
2
-
-
... More
Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete.
18
-
-
... More
Supplying, installing, testing, and commissioning of portable fire extinguishers of ABC dry powder stored pressure type fire extinguishers of 6 Kgs.capacity Complete with standard discharge valve with tube, CI bracket for wall mounting etc. complete as per confirming to IS : 15683 complete all the work up to the satisfaction of the Engineer in charge.
30
-
-
... More
Providing and fixing in position statutory Signage's made out of 3mm thick opaque PVC foam board, machine cut, non reflective, auto glow (type & Make), with silicon adhesive for safe evacuation of occupants in case of emergency. Sign indicators should be provided at prominent places as per Fire Provisional NOC (As per - IS-9457, IS-12349, IS-12407). complete all the work up to the satisfaction of the Engineer in charge.
40
-
-
... More
Providing, laying, testing & commissioning of 100mm dia resilient rubber neoprene lined single arch Vibration eliminators (Expansion bellows) suitable for Design Pressure 16 kg/sq cm and test pressure 24 kg/sq cm. complete all the work up to the satisfaction of the Engineer in charge.
1
-
-
... More
Providing Floor mounting stand for keeping 4 Nos. of FIRE buckets 1500mm in length, 900mm in height frame made out of 30x30x4 mm angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of silver paint complete.
2
-
-
... More
Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as
directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (BdA-1/259) Lift 0 to 1.5 M Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum.()
321.1
-
-
... More
Providing & laying including all necessary excavation in all strata, supply of labour for lowering, jointing RCC NP 2 class pipes conforming to IS:458 from first manhole upto STP including necessary ramming of subgrade after excavation to achieve a designed gradient & alignment by site rails & boning rods for proper leveling & making the joints water-tight with cement mortor 1:1 joints hemp yarn including 6" thick 1:3:6 C.C. bedding & encasement on all sides throughout length, excavation in all types of soils, refilling, curing etc. complete as per directions of engineer-in-charge including dewatering wherever necessary.
150mm
214.5
-
-
... More
Providing & laying including all necessary excavation in all strata, supply of labour for lowering, jointing RCC NP 2 class pipes conforming to IS:458 from first manhole upto STP including necessary ramming of subgrade after excavation to achieve a designed gradient & alignment by site rails & boning rods for proper leveling & making the joints water-tight with cement mortor 1:1 joints hemp yarn including 6" thick 1:3:6 C.C. bedding & encasement on all sides throughout length, excavation in all types of soils, refilling, curing etc. complete as per directions of engineer-in-charge including dewatering wherever necessary.
200mm
242
-
-
... More
Providing & laying including all necessary excavation in all strata, supply of labour for lowering, jointing RCC NP 2 class pipes conforming to IS:458 from first manhole upto STP including necessary ramming of subgrade after excavation to achieve a designed gradient & alignment by site rails & boning rods for proper leveling & making the joints water-tight with cement mortor 1:1 joints hemp yarn including 6" thick 1:3:6 C.C. bedding & encasement on all sides throughout length, excavation in all types of soils, refilling, curing etc. complete as per directions of engineer-in-charge including dewatering wherever necessary.
250mm
104.5
-
-
... More
Constructing Gully Traps/ Inspection chamber with precast steel fibre reinforced concrete frame and covers (S.F.R.C. frame and covers) Providing and constructing B.B. masonry in 230 X 100 X 75 mm brick inspection chamber with 100mmthick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion half round RCC pipe of required dia, precast S.F.R.C. frame and cover heavy duty 225 kg., plastering both inside and outside in CM 1:3 with cement finish,, 100 mm thick PCC 1:2:4 coping on B.B. masonry etc. complete as directed by Engineer-in-charge.
Note : i) Wall thickness : 0.23 M for depth of 1.2 M and 0.35 M for balance depth exceeding 1.2 M.
600 x 450mm (upto 0.9 m depth)
23
-
-
... More
Constructing Gully Traps/ Inspection chamber with precast steel fibre reinforced concrete frame and covers (S.F.R.C. frame and covers) Providing and constructing B.B. masonry in 230 X 100 X 75 mm brick inspection chamber with 100mmthick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion half round RCC pipe of required dia, precast S.F.R.C. frame and cover heavy duty 225 kg., plastering both inside and outside in CM 1:3 with cement finish,, 100 mm thick PCC 1:2:4 coping on B.B. masonry etc. complete as directed by Engineer-in-charge.
Note : i) Wall thickness : 0.23 M for depth of 1.2 M and 0.35 M for balance depth exceeding 1.2 M.
600 x 600 mm (upto 0.9 m depth)
31
-
-
... More
Providing and constructing on sewer line, B. B. masonry circular manhole with concentric cone 1.2 M dia. at bottom and 0.5 M dia. at top and upto a depth of 2.00 M with 23 cm. thick in 230 X 100 X 75 mm brick
masonry in CM 1:5 proportion plastering both inside and outside in CM 1:3 with cement finish, half round RCC pipe of required dia excluding excavation including PCC1:3:6 in bed 100 mm thick , haunches and channels in 1:2:4 proportion concrete, finishing channels in smooth rendering, providing C.I. dapuri type
steps each weighing 5.5 kg., 100 mm thick 1:2:4 coping on the top of the masonry & below frame including providing and fixing approved make and quality S.F.R.C. frame and cover of 56 cm dia. heavy duty 225 kg. etc. complete as directed byEngineerin- charge.
Note : The rate of this item isinclusive of hydraulic testing of chamber.
560 MM Dia Circular Chamber (Above 1.2 m depth)
12
-
-
... More
Providing & laying including all necessary excavation in all strata, supply of labour for lowering, jointing RCC NP 2 class pipes conforming to IS:458 from first manhole upto munciple drain including necessary ramming of subgrade after excavation to achieve a designed gradient & alignment by site rails & boning rods for proper leveling & making the joints water-tight with cement mortor 1:1 joints hemp yarn including 6" thick 1:3:6 C.C. bedding & encasement on all sides throughout length, excavation in all types of soils, refilling, curing etc. complete as per directions of engineer-in-charge including dewatering wherever necessary.
200mm
214.5
-
-
... More
Providing & laying including all necessary excavation in all strata, supply of labour for lowering, jointing RCC NP 2 class pipes conforming to IS:458 from first manhole upto munciple drain including necessary ramming of subgrade after excavation to achieve a designed gradient & alignment by site rails & boning rods for proper leveling & making the joints water-tight with cement mortor 1:1 joints hemp yarn including 6" thick 1:3:6 C.C. bedding & encasement on all sides throughout length, excavation in all types of soils, refilling, curing etc. complete as per directions of engineer-in-charge including dewatering wherever necessary.
250mm
198
-
-
... More
Providing & laying including all necessary excavation in all strata, supply of labour for lowering, jointing RCC NP 2 class pipes conforming to IS:458 from first manhole upto munciple drain including necessary ramming of subgrade after excavation to achieve a designed gradient & alignment by site rails & boning rods for proper leveling & making the joints water-tight with cement mortor 1:1 joints hemp yarn including 6" thick 1:3:6 C.C. bedding & encasement on all sides throughout length, excavation in all types of soils, refilling, curing etc. complete as per directions of engineer-in-charge including dewatering wherever necessary.
300mm
88
-
-
... More
Providing and laying cast in situ Brick Masonry gutter/ drain with following specification along roads / courtyards including excavation, P.C.C. & fixing of RCC perforeted cover (heavy duty), over the drain in proper line and alignment, including back fillings, dewatering etc. complete including: (depth varies from 450 mm to 2000 mm ) For External Surface Drain
300mm Wide
22
-
-
... More
Constructing catch pits with precast steel fibre reinforced concrete frame and covers (S.F.R.C. frame and covers) Providing and constructing B.B. masonry in 230 X 100 X 75 mm brick inspection chamber with 100mmthick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion half round RCC pipe of required dia, precast S.F.R.C. frame and cover heavy duty 225 kg., plastering both inside and outside in CM 1:3 with cement finish,, 100 mm thick PCC 1:2:4 coping on B.B. masonry etc. complete as directed by Engineer-in-charge.
Note : i) Wall thickness : 0.23 M for depth of 1.2 M and 0.35 M for balance depth exceeding 1.2 M.
450 x 600 mm
6
-
-
... More
Constructing catch pits with precast steel fibre reinforced concrete frame and covers (S.F.R.C. frame and covers) Providing and constructing B.B. masonry in 230 X 100 X 75 mm brick inspection chamber with 100mmthick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion half round RCC pipe of required dia, precast S.F.R.C. frame and cover heavy duty 225 kg., plastering both inside and outside in CM 1:3 with cement finish,, 100 mm thick PCC 1:2:4 coping on B.B. masonry etc. complete as directed by Engineer-in-charge.
Note : i) Wall thickness : 0.23 M for depth of 1.2 M and 0.35 M for balance depth exceeding 1.2 M.
600 x 600 mm
23
-
-
... More
Providing and constructing on sewer line, B. B. masonry circular manhole with concentric cone 1.2 M dia. at bottom and 0.5 M dia. at top and upto a depth of 2.00 M with 23 cm. thick in 230 X 100 X 75 mm brick
masonry in CM 1:5 proportion plastering both inside and outside in CM 1:3 with cement finish, half round RCC pipe of required dia excluding excavation including PCC1:3:6 in bed 100 mm thick , haunches and channels in 1:2:4 proportion concrete, finishing channels in smooth rendering, providing C.I. dapuri type
steps each weighing 5.5 kg., 100 mm thick 1:2:4 coping on the top of the masonry & below frame including providing and fixing approved make and quality S.F.R.C. frame and cover of 56 cm dia. heavy duty 225 kg. etc. complete as directed byEngineerin- charge.
Note : The rate of this item isinclusive of hydraulic testing of chamber.
560 MM Dia Circular Chamber (Above 1.2 m depth)
7
-
-
... More
Providing & Fixing Wafer Type Butterfly Valves with Body of Cast Iron, Disc of Cast Iron/Stainless Steel and body lining of EPDM including jointing with Galvanised Iron pipes including hydraulic testing etc. complete as directed by the engineer-in-charge.
100mm
2
-
-
... More
Providing & Fixing Wafer Type Butterfly Valves with Body of Cast Iron, Disc of Cast Iron/Stainless Steel and body lining of EPDM including jointing with Galvanised Iron pipes including hydraulic testing etc. complete as directed by the engineer-in-charge.
65mm
1
-
-
... More
Supply, installation, testing & commissioning of 'C' class G.I. pipes of to confirm IS 1239 upto dia 150mm malleable specials extruded type, such as Reducers, elbows, Tees, flanges etc... and necessary puddle flanges for tanks. The pipes shall be painted, after total removal of rust, with One coat each of Epoxy primer & Paint using approved type, Galvanized, supports at standard spacing, anchor fasteners, bolts, nuts, clamps, rails "U" & threaded bolt, Including cutting, Welding, fixing in / on walls, Floors & ceiling by using the supports etc, as per drawings. The quoted rate shall also include for chasing / chipping walls, making holes in walls / floor and making them good with non shrink filler material / RCC/ blocks as required and finished in cement mortar etc. complete. (For Raising main,Municipal & Tanker Inlet)
65mm
330
-
-
... More
Supply, installation, testing & commissioning of 'C' class G.I. pipes of to confirm IS 1239 upto dia 150mm malleable specials extruded type, such as Reducers, elbows, Tees, flanges etc... and necessary puddle flanges for tanks. The pipes shall be painted, after total removal of rust, with One coat each of Epoxy primer & Paint using approved type, Galvanized, supports at standard spacing, anchor fasteners, bolts, nuts, clamps, rails "U" & threaded bolt, Including cutting, Welding, fixing in / on walls, Floors & ceiling by using the supports etc, as per drawings. The quoted rate shall also include for chasing / chipping walls, making holes in walls / floor and making them good with non shrink filler material / RCC/ blocks as required and finished in cement mortar etc. complete. (For Raising main,Municipal & Tanker Inlet)
32mm
130
-
-
... More
Providing & Fixing of water meter with strainer as per approved make including supply of required specials & isolation valves, hemp yarn etc complete to make it water tight and providing locking arrangement to the same etc. complete as per directions of engineer-in-charge.
100mm dia
1
-
-
... More
Construction of B.B. Masonry chamber for water meter of following size including excavation, cement concrete bedding of 150 mm thick and plastering with cement mortor 1:3 from inside and outside and fixing air tight RCC covers (heavy duty) including curing etc.complete as per direction of engineer-in-charge.
1200mm x 750mm
1
-
-
... More
Supply & Fixing in position galvanised iron puddle flanges of approx. 60 cm length with flange on one end and welded to mild steel plate (8mm thick) in the centre etc. complete as directed by engineer-in-charge.
Flange on both end 150mm
4
-
-
... More
Supply & Fixing in position galvanised iron puddle flanges of approx. 60 cm length with flange on one end and welded to mild steel plate (8mm thick) in the centre etc. complete as directed by engineer-in-charge.
Flange on both end 100mm
2
-
-
... More
Supply & Fixing in position galvanised iron puddle flanges of approx. 60 cm length with flange on one end and welded to mild steel plate (8mm thick) in the centre etc. complete as directed by engineer-in-charge.
Flange on both end 65mm
2
-
-
... More
Supply & Fixing in position galvanised iron puddle flanges of approx. 60 cm length with flange on one end and welded to mild steel plate (8mm thick) in the centre etc. complete as directed by engineer-in-charge.
Flange on both end 32mm
6
-
-
... More
Supply & Fixing in position galvanised iron puddle flanges of approx. 60 cm length with flange on one end and welded to mild steel plate (8mm thick) in the centre etc. complete as directed by engineer-in-charge.
Flange on one end 100mm
3
-
-
... More
Supply & Fixing in position galvanised iron puddle flanges of approx. 60 cm length with flange on one end and welded to mild steel plate (8mm thick) in the centre etc. complete as directed by engineer-in-charge.
Flange on one end 65mm
3
-
-
... More
Supply & Fixing in position galvanised iron puddle flanges of approx. 60 cm length with flange on one end and welded to mild steel plate (8mm thick) in the centre etc. complete as directed by engineer-in-charge.
Flange on one end 50mm
6
-
-
... More
Supply & installation of Ductile Iron Manhole Covers with frame,& openable hinge of 600X600 Dia. (Light Duty) for UGR including all necessary supports, grouting of the frame in RCC, making arrangements for recessed locking of the Manhole cover etc. complete as directed by engineer-in-charge.
6
-
-
... More
Supply, installation, testing and commissioning of Skid mounted Hydro-pneumatic system of Vertical in line pump set with Variable Frequency Drive . Domestic Water Supply System For Building -330 lpm, Head - 50 meter (Approx. 5hp /pump)
Pump Qty - 3 (2working +1 stand by / Duty Assist) Siemens switch gear make control panel along with PLC, PID Controller with all necessary cascade system automation, Power & Control MCB, MPCB , Over load \ Under load, SPP \ RPP, Dry run and all necessary pump & voltage protection, Indication lamp, Digital Pressure indicator cum controller.
Danfoss make Pressure Transmitter & Pressure switch, Gauge, Pressure Tank etc. Skid for pumpset with Hot deep Galvnised Suction & Delivery Header Plumbing Accessories along with Ball Valve, NRV, Y type Strainer Polycab make power cable for pumpset & Control cable float switch sensor , control cable for sensor etc complete as per direction of Engineer-in-charge. Pumpset & Control Pannel shall be company assembled factory fitted system with test certificate should be submitted. Vendor to submit performance curves and technical catalog of the proposed model for review & approval by consultants.
Note:
Contractor to note that the suction header is required to have inlet connection from the Puddle Flange @ water tanks and to the pump suction. Provision of delivery header is required to have outlet connection from the pumps. Suitable outlet flanges from the delivery mainfold / header shall be provided as required.
1
-
-
... More
Providing and constructing recharge ring well of required dia with casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, including excavation and stacking the soil and disposing as per the instructions of engineerincharge, all complete as per direction of Engineer in-charge, upto 90 metre depth below ground level. Filling with gravels and boulders from outside of the circumference of the collar of 1.2m dia upto 6m so as to allow infiltration of supplied water from inside of the well through the gap between the collars to the ground water aquifer
Supplying & fixing 40 mm thick DI heavy Rain water grating over storm water channel of heavy duty. b) 600 x 450 MM (450wide)
4
-
-
... More
Providing and fixing white european type wall-hung, Size 380mm x 650mm x 730mm with wall hung coupled flush tank with float operation auto filling, rigid flush water pipe having flow rate upto 6.0 Litr/Minute of Jaquar or equivalent make including PVC soil pipe, vent pipe upto outside face of wall, 100mm dia PVC plug bend inlet pipe all fittings, MS PC chair backet with SS rack bolts cutting &making good walls, floors etc as directed by Engineer incharge .(Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.){necessary pipe connections including UPAC waste pipe and trap upto the outside face of the wall, making good the damaged surface, testing etc. complete.}
21
-
-
... More
Providing and fixing White glazed with bottle trap earthenware Wash Hand Basin of 55x40 cm size including cold water piller taps, brackets, rubber plugs and brass chain, angular stop tap, chromium plate bottle trap and necessary pipe connections including UPAC waste pipe and trap upto the outside face of the wall, making good the damaged surface, testing etc. complete.
24
-
-
... More
Providing and fixing white glazed urinal with Pressmatic auto closing valve having flow rate up to 4.0 Litr/Minute of Jaquar/Cera/Hindware /Perryware or equivalent make with P.V.C. waste pipe with fitting arrangement etc.complete as directed by Engineer in charge.( Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.)
27
-
-
... More
Providing and fixing Hand shower (health faucet) with 8mm dia. 1m long flexible tube having wall hook with approved make including necessary sockets/ union nut etc. complete as directed by Engineer in charge.(SSR 21-22)
21
-
-
... More
Providing and fixing stainless steel sink of size 600 x 510 x200 mm incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete.
3
-
-
... More
Providing and fixing C.P. sink cock with raised J" shaped swinging casted spout ofapproved make including necessary sockets/ union nut etc. complete."
3
-
-
... More
Providing and fixing C.P. 2 Way BIB cock with wall flange of approved make including ecessary sockets/ union nut etc. complete as directed by Engineer in charge.
21
-
-
... More
Providing and fixing C.P. BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete as directed by Engineer in charge. ( For wash machine & Utility).
3
-
-
... More
Providing and fixing C.P. Angular stop clock with wall flange of approved make continental ncluding necessary sockets/union nut etc. complete.
3
-
-
... More
Providing and Fixing toilet set for differently Abled persons consist of Floor Mounted white vitreous china water Closet including 6 litre capacity white vitreous china flushing Cistern with raised soft-push button, white vitreous china wash basin of size 46 x 36 cm and one no SS 304 hinged rail 76 cms & three no SS 304of (Grab Bar) 60 cms all including cutting and making good the walls and floors wherever required ,seat cover, cistern & wash basin fittings,nuts, bolts and gasket etc complete as per the direction of Engineer-In-charge.
6
-
-
... More
Providing, laying and fixing P.V.C. pipe of 40mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trenchfilling etc. complete. Including removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
83.2
-
-
... More
Providing, laying and fixing P.V.C. pipe of 50mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trenchfilling etc. complete. Including removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
1
-
-
... More
Providing, laying and fixing P.V.C. pipe of 75mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trenchfilling etc. complete. Including removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
90.8
-
-
... More
Providing, laying and fixing P.V.C. pipe of 110mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trenchfilling etc. complete. Including removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
49.5
-
-
... More
Supply, installation, testing & commissioning of PVC SWR (Grade B) pipe as per IS 13592, of approved make vertically in shaft, necessary cutting to the required length including short pieces, assorted fittings such as plain tee and bend single/ double Y, offsets etc. as per IS 14735, jointing with solvent cement & rubber rings, clamping on wall using PVC pipe clips and giving water-tightness test for the pipes along with making holes in walls/floor grooving and redoing the same and brick support etc. complete as per directions of engineer-in-charge. 50mm dia (Grade B) Vent Pipe
1
-
-
... More
Supply, installation, testing & commissioning of PVC SWR (Grade B) pipe as per IS 13592, of approved make vertically in shaft, necessary cutting to the required length including short pieces, assorted fittings such as plain tee and bend single/ double Y, offsets etc. as per IS 14735, jointing with solvent cement & rubber rings, clamping on wall using PVC pipe clips and giving water-tightness test for the pipes along with making holes in walls/floor grooving and redoing the same and brick support etc. complete as per directions of engineer-in-charge. 75mm dia (Grade B)
1
-
-
... More
Supply, installation, testing & commissioning of PVC SWR (Grade B) pipe as per IS 13592, of approved make vertically in shaft, necessary cutting to the required length including short pieces, assorted fittings such as plain tee and bend single/ double Y, offsets etc. as per IS 14735, jointing with solvent cement & rubber rings, clamping on wall using PVC pipe clips and giving water-tightness test for the pipes along with making holes in walls/floor grooving and redoing the same and brick support etc. complete as per directions of engineer-in-charge. 110mm dia (Grade B)
379.5
-
-
... More
Supply, installation, testing & commissioning of PVC SWR (Grade B) Soil or Waste pipe as per IS 13592 for Pipe Diversion with necessary cutting to be done to the required length including short pieces, assorted fittings such as plug/plain tee, bend, single/double Y, offsets etc. as per IS 14735, jointing with solvent cement & rubber rings, clamping on wall using PVC pipe clips and giving water-tightness test for the pipes along with making holes in walls/floor grooving and redoing the same and brick support etc. complete as per directions of engineer-in-charge. (Pipe Diversion @ Ground & Basement Ceiling)
110mm dia (Grade B)
99
-
-
... More
Providing and fixing 8 cm rigid PVC Nahani trap including PVC grating ,bend, connecting piece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use)
27
-
-
... More
Supply, installation, testing & commissioning of PVC Multi floor Trap as per IS 14735, with material and labour etc. complete as per directions of engineer-in-charge.
27
-
-
... More
Providing and fixing P.V.C. Rain water pipes of 160mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and One Number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete.
79.2
-
-
... More
Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and One Number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete.
1
-
-
... More
Providing and fixing C.I. vertical jalli of the specified size at the collection point of RWP on terrace to be with material and labour including provision of roof flashing of 6mm thickness as per details etc. complete as per directions of engineer-in-charge. ( MATERIAL SSR+ LABOUR SSR)
4
-
-
... More
Providing and fixing in position UPVC ultraviolet stabilized 110mm outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etc. complete
20
-
-
... More
Supply, installation, testing & commissioning of exposed on wall faces, floor, shaft & Terrace following sizes of Lead Free Solvent Weld Schedule 40 CPVC Pipes conforming to ASTM D 1785 for water supply including provision of all fittings such as elbows, Tees, unions, reducers etc. as per ASTM D 2467, cutting of pipes, jointing with solvent cement joints as per manufacturers specifications, hydraulic testing, including holes in walls, slabs etc. provision of GI Brackets & Clamps and making good the damages by bringing them to good original condition, etc. complete as directed by the engineer-in-charge. 65 mm dia
58.3
-
-
... More
Providing and fixing on walls/ ceiling/ floor CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
50 mm dia
22.44
-
-
... More
Providing and fixing on walls/ ceiling/ floor CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
40 mm dia
9.9
-
-
... More
Providing and fixing on walls/ ceiling/ floor CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
32 mm dia
49.5
-
-
... More
Providing and fixing on walls/ ceiling/ floor CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
25 mm dia
49.5
-
-
... More
Providing and fixing on walls/ ceiling/ floor CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
20 mm dia
104.5
-
-
... More
Providing and fixing on walls/ ceiling/ floor CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
15 mm dia
214.5
-
-
... More
Providing and fixing of CPVC Ball Stop cocks.
50 mm dia
2
-
-
... More
Providing and fixing of CPVC Ball Stop cocks.
40 mm dia
1
-
-
... More
Providing and fixing of CPVC Ball Stop cocks.
32 mm dia
7
-
-
... More
Providing and fixing of CPVC Ball Stop cocks.
25 mm dia
12
-
-
... More
Providing and fixing of CPVC Ball Stop cocks.
20 mm dia
27
-
-
... More
Providing and fixing of CPVC Ball Stop cocks.
15 mm dia
42
-
-
... More
Supplying and erecting required dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV
65 mm dia
2
-
-
... More
Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV
2
-
-
... More
Supply & Fixing in position galvanised iron puddle flanges of approx. 60 cm length with flange on one end and welded to mild steel plate (8mm thick) in the centre etc. complete as directed by engineer-in-charge.
Flange on one end 100mm
1
-
-
... More
Supply & Fixing in position galvanised iron puddle flanges of approx. 60 cm length with flange on one end and welded to mild steel plate (8mm thick) in the centre etc. complete as directed by engineer-in-charge.
Flange on one end 65mm
2
-
-
... More
Supply & Fixing in position galvanised iron puddle flanges of approx. 60 cm length with flange on one end and welded to mild steel plate (8mm thick) in the centre etc. complete as directed by engineer-in-charge.
Flange on one end 50mm
2
-
-
... More
Supply & Fixing in position galvanised iron puddle flanges of approx. 60 cm length with flange on one end and welded to mild steel plate (8mm thick) in the centre etc. complete as directed by engineer-in-charge.
Flange on one end 32mm
1
-
-
... More
Supply & installation of Ductile Iron Manhole Covers with frame,& openable hinge of 600mm Dia. (Light Duty) for UGR including all necessary supports, grouting of the frame in RCC, making arrangements for recessed locking of the Manhole cover etc. complete as directed by engineer-in-charge. ( MATREIAL SSR + LABOUR SSR)
4
-
-
... More
Providing and fixing 40 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirements etc. complete.
Note: Contractor to note that the suction header is required to have inlet connection from the Puddle Flange @ water tanks and to the pump suction. Provision of delivery header is required to have outlet connection from the pumps. Suitable outlet flanges from the delivery mainfold / header shall be provided as required.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements